Cannot use the HD on Qosmio G30 drive with Vista OS

Similar Questions

• In the command prompt, cannot use the change to another cd drive

  Hello

  At the command prompt, the current directory is c:\Windows, I use the command "cd J:\new", but I still in c:\Windows, is there anyone can understand it? THX.

  CD change directory. You must use J: ENTER to change the player j. "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Cannot use the files copied from Windows 8/7/Vista in windows XP.

  Always there are people who use Windows Xp, the problem is that when I copy the files in my USB and use it in my friends house, then Windows XP said 'pen drive not formatted ".

  Always there are people who use Windows Xp, the problem is that when I copy the files in my USB and use it in my friends house, then Windows XP said 'pen drive not formatted ".

  How is the "pen drive" formatted - with what the specific OS file system?
   
  This is more likely to be a file system - do not operating system (although related, not as much as you might think)-problem.  Another possibility is a problem hardware or bad driver on the machine Windows XP itself.  It could also be, although rare, an incompatible 'USB key '.
   
  What is the 'pen drive' is formatted with the file system is essentially - the first question to ask.  Then - if I were you - I everything on the 'pen drive' copy on a computer which can be read - if committed to the machine more common denominator (in this case the Windows XP machine) you will use and FORMAT this 'pen drive' using this machine.  One of the few possible things will happen no doubt...

  (1) you'll find you format it with a version of NTFS that will work in all areas - all the machines that you can use with Windows XP or more on them.  Then this problem will disappear.

  (2) you will find there * is * something wrong with the Windows XP specific in question and this machine is not a problem easily solved this and your "pen drive" probably will work on someone elses machine Windows XP very well as it existed before.

  (3) you will end up with a FAT32 formatted "pen drive" that should work on most any system - as long as you don't need to transfer * really * large individual files.

• Cannot use the S-video on Satellite A100-906 Vista port

  I can't switch to s-video, as I installed windows Vista and I do not know why.
  I downloaded all the drivers for Vista, but nothing. When I have my original WXP everything. My win vista is an original version, and I don't know what to do.

  Please can someone help me?
  Please send me the solution?

  First of all, it would be necessary to know what laptop you have.

  Second, you should check the options in the properties of the graphics card that could help to activate the external TV output.

  Also the use of the FN + F5 key combination should help to switch to the external display!

• Cannot use the cd - rw drive. the icon disappeard. I'm using Vista premium edition

  happened all of a sudden. Click on the computer and everything you see is recoverydrive and the c drive

  Hello

  Step 1: Please do all the same underneath if you did some before as it is often the set of operations which solves the problem.

  Try this double click Control Panel - Device Manager - CD/DVD - device - tab - click on update drivers (this will probably do nothing) - then RIGHT click the drive of the driver - UNINSTALL - REBOOT this will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then work your way through these - don't forget the drive might be bad, might have a cable loose or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs - a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables at both ends. Remove and replace, do not just tight. For laptops, you can often clean power and contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the system manufacturer and the manufacturer of the device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (burn CD & DVD and CD and DVD read). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some entries in the registry that the troubleshooter does not solve, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the correct registry entries for your car.

  These are the keys in my opinion, are those in question - secondary-keys for the CD/DVD drive of course because there will be other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more information here and maybe even registry settings correct for your CD/DVD from someone with the same drive model.

  You can probably find more information here and maybe even registry settings correct for your CD/DVD from someone with the same drive model.

  Forums - much real experts help and hardware information
  http://club.myce.com/-

  Use DevManView to locate the CD/DVD in the registry (be careful and do a Restore Point before changing anything)-find the DevManView device and then right click it open in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.
  --------------------------------------------------------------------------------------------
  Rob Brown - Microsoft MVP<- profile="" -="" windows="" experience :="" bicycle="" -="" mark="" twain="" said="" it="">

• Cannot use the functions F1-12 on my Satellite C55 - A - 19 K

  Hello

  Satellite C55 - A - 19 K have a keyboard drivers?
  I cannot use the functions F1-12 and can not get the wireless since it s on the keyboard...
  Any 1 can help please?

  This function is not controlled by the driver keyboard, but with utilities and tools specific to Toshiba.
  What operating system do you use?

• Cannot use the configuration information of the States DVD burner are incomplete or damaged

  I have an external PIONEER DVRW DVR X 162 DVD WRITER, and I can't use 0depenses with dvd software.
  the warning in the DEVICES MANAGER says "Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged. (Code 19)
  What should I do now?
  Thanks, Mike

  Hello

  19 code means there is a driver conflict such as two devices attempt to use the same resources.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

• cannot use the CD to install the printer. Series of HP Office Pro 85 A909g

  Cannot use the CD-Rom installation disc to install the printer.  Series of HP Office Pro 8500 has 909 g.  I need to know if I can download what I need to do my printer works.

  Visit the hp product page: http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?cc=us&lc=en&dlc=en&product=3752459
  Select the operating system of the computer and download the driver software.

• Windows cannot initialize the device of this hardware driver. (Code 37)

  Windows cannot initialize the device of this hardware driver. (Code 37)
  There is no upper or lower filters in reg.
  external device does also not same massage (Windows cannot initialize the device of this hardware driver. (Code 37))
  How do I solve this problem

  Hello Rajendra Aagarwal,

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it looks that you are having problems with the error message Windows cannot initialize the device of this hardware driver. (Code 37).

  Method 1: Run the Fixit and check

  Hardware devices do not work or are not detected in Windows (Fixit)

  Method 2: Check the steps to get the 37 error code

  Explanation of error codes generated by Device Manager in Windows XP Professional 

  Answer to us if you are having problems with the devcie or any other issue of Windows, and I'd be happy to help you.

  Good day!

  Hope this information helps.

• Users on the network cannot use the files after upgrade to Windows 10

  When I switch to win 10 people on the network cannot use the files on my computer

  Hello

  Thanks for posting your query on the Microsoft Community.

  With the description, I understand that you have problems with network connectivity and access files on network on your Windows 7 machine. I will certainly help you to the query.

  I would be grateful if you could help me with more information to better understand the problem and a solution:

  1 is this computer connected to a network domain or home?

  2. what exactly happens when users on the network try to use/access files on this computer? Do they get an error message/code?

  In the meantime, I suggest you refer to the below mentioned thread and check if this is useful:

  http://answers.Microsoft.com/en-us/Insider/Forum/insider_wintp-insider_web/Windows-10-network-file-sharing/18fba63e-7b6c-46FE-BA23-575a634fcee8

  Hope this information is useful. Please write us back with the required information for assistance, we will be happy to help you.

• When you use the question mark, appears like a capital E with accent French and cannot use the quotes.

  Original title: I can't use my question mark (rises like a capital E with accent French and cannot use the quotes)

  I'm having a problem from time to time with my ability to use marks quotaion, brands etc. How can I treat it DEFINITIVELY the question.

  Thank you

  Hi golfnut11,

  1. you are using a laptop?

  2. you remember to make changes to the computer priro to this question?

  Step 1:

  If you use a laptop, check if the FN key is enabled. If so, then try to turn it off and check.

  Step 2:

  You can also try to check the keyboard on the screen and if the problem occurs or not.

  Check out the link:

  Type without using the keyboard (on-screen keyboard)

  http://Windows.Microsoft.com/en-us/Windows7/type-without-using-the-keyboard-on-screen-keyboard

  If you use a Microsoft keyboard, you can also consult the following article:

  Troubleshoot wired keyboards that do not or only the erroneous characters category
  http://support.Microsoft.com/kb/258826

  Hope this information is useful.

• My computer (win 7) does not detect the new lx1000 lifechat headset. Cannot use the microphone while I am on Skype.

  My computer (win 7) does not detect the new headset.

  Cannot use the microphone while I am on Skype.
  I Can hear music, but I can't record any sound, for the most part the microphone does not work as it should. (Which is terrible for a MS product)
  Can not see the device on the list of Audio material.
  Help?
  Thanks in advance
   
  Original title: lx1000 lifechat

  Not sure, but maybe - http://support.microsoft.com/kb/935748/en-gb

  It will be useful.

• Cannot use the Start button

  For some reason, when I try to click on the Start button, it disappears.  I tried all day to dissable addons that sort, but it ended up doing another way.  I have restarted computor, but the Start button, always goes away until I can click on it.  Everyone comes through this before please?

  Hello BeverleyMacKenzie,

  Thank you for the question!

  I'm sorry to know that have problems you with start button. As I understand it, you cannot use the button start effectively.

  Method 1: perform the scan SFC (System File Checker) and see if the problem occurs.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  Method 2: use the Microsoft Safety Scanner in full scan mode and to remove all the threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Answer to us if you have problems with start button or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.

  Good day!

  Hope this information helps.

• Cannot use the timecode source in my project?

  I do not properly understand that Premiere Pro that you cannot use the timecode source in your project? I know that I can change the BEGINNING of t - c in a clip, but I need to read it off the camera (XDCAM EX3)? And if indeed I can't use source t/c - WHY NOT? My files audio syc'ed must be Sync manually!

  Thanks for a reply Adobe

  You can read the timecode source of your clips in several locations within Premiere Pro.

  If you load the clip from the source to the source monitor, don't you see the time code of the displayed item?

  Where you are waiting to see the timecode and don't see it?

  MtD

• Hello! I have the CD of Acrobat Pro DC version and then to buy the subscription monthly I couldn't code redemption to work for my MS Surface Pro 4... as obviously cannot use the CD but Staples has sold to me, I opened it: Staples said that they c

  Sorry I added it in the question, sorry about that part!

  Hello! I have the CD of Acrobat Pro DC version and then to buy the subscription monthly I couldn't code CD Exchange to work for my MS Surface Pro 4... as obviously cannot use the CD but Staples has sold to me, I opened it: Staples said that they could transfer to my Surface and they canceled the monthly... but no, I'm still paying every month and I have a box of cd $ 500 that I can't use! Help, please!  How can I activate this pay redemption code (which does not work? I tried for hours!) and I pay monthly?  Help, please!

  Hi shannonr44052735,

  I see that you have an active subscription to Acrobat Pro DC under your email address.

  See this KB doc for help: redemption code help

  If your redemption code does not work, I will propose you to return what you already active subscription.

  You can install Acrobat Pro DC from this link: download Pro or Standard versions of Acrobat DC, XI or X

  Make sure that you use the same Adobe ID, in which you have Acrobat subscription.

  Let us know if you need help.

  Kind regards

  Meenakshi