The alx file has an invalid key or a value

Similar Questions

• Firefox shows "the peer certificate has an invalid signature." ISMA shows "could not trust this certificate for unknown reasons.

  With the help of a PKI on site of 2 levels. Root CA offline (Standalone Windows 2008 R2, Enterprise Edition) and Isma online for delivery of certificates (Domain-Joined, issuing CA)

  ROOTCA certificate installed in the store and the approved display (PKCS #1 SHA-256 with RSA algorithm encryption and uses a signature SHA2)

  ISSUINGCA certificate installed in the store and display "couldn't trust for unknown reasons" has also SHA2 signature with the RSASSA-PSS algorithm

  Certificate issued is for a Web Server front end Lync and when it tries to load the secure web connection. I get the message "the peer certificate has an invalid signature."

  I completely uninstalled and reinstalled Firefox. Removed and added certificates ROOT and ISMA. Note: No problem when using the same certificates in Internet Explorer 8, 9 or 10 on the same system. Lync client also uses the same certificates, no problem. Only when access to the Web Services of Lync from Firefox.
  Question: Firefox NSS #11 internal Module PCKS supports RSASSA - PSS SHA-256 with different hashes? How can I solve this further?

  I finally found the problem. The ROOT CA has the following registry key configuration when cert Isma was published:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\CertSvc\Configuration\IssuingCA\CSP\AlternateSignatureAlgorithm = 1

  This CA cause ROOT to issue the cert with a signature that is encrypted with the algorithm RSASSA-PSS (1.2.840.113549.1.1.10).

  This signature replacement algorithm no is apparently not supported for use with Firefox 27.0

  I changed the registry value on the ROOT CA to a value of 0. Renewed the cert IssuingCA (using the same private key) which is now on display with sha256RSA encryption. I have republished all my default web certificates now using this new broadcast chain CA without problem.

• Custom in the ALX files properties

  Hello

  in fact I deploy my application OTA. I added some special parameters in the JAD file to configure the application before it is downloaded to the device. Using the CodeModuleGroupManager I can then read properties and use them in my application.

  Now, I have received the request to deploy my application using Blackberry Enterprise Manager. The administrator has informed me, he uses an ALX file to install the application on the device. Now, my problem is that the additional settings to configure my application are no longer there (it is not possible to install the jad with alx files). Is it possible to add custom in the alx file properties? Or y at - it another way to do with BES?

  Thanks for your help,

  Lars

  Take a look at BES Admin Manual. On the side of the unit, you can query the TI custom policy settings using the ITPolicy class.

• Download error. The downloaded file has no verification. Code of error = 0x80040507__Google Chrome Installer

  Hello. I have a problem that I recently received these messages on computer blue screen comes and goes... (bsofd) when im using the internet only. Told me to stop using ie 8 and google chrome but when I tried to download it it was the message that I received... "Download error. The downloaded file has no verification. error code = 0 x 80040507 ". I have windows xp... SP3. my hardware is dual cpu, 2 GB ram, 1 TB hard drive and 512 graphics card. Please help me

  Hi Arvind,

  You try to run chkdsk on the machine and check if the problem persists.

  How to perform disk error checking in Windows XP

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Error when you try to view videos of the Kodak Easyshare touch camera: the selected file has an extension (.) (THM) which is not recognized by Windows Media player.

  Camera video will not play on the computer

  I recently bought a Kodak EasyShare touch camera.  Love it, but for some reason some will not play videos from the camera to my computer.  He will say: the selected file has an extension (.) (THM) it is not recognized by Windows Media player.  Any suggestions?

  . THM is a thumbnail of the file... not a video file. I suspect that your
  Kodak records in the. MOV or possibly. Film MP4 format.

• Skip (project) to check, because the apk file has not changed.

  Hello all, I get the message 'Skip (project) to check, because the apk file has not been modified' in the error log when I'm checking an Android APK. Since I donot have required a device or a simulator (lack of processor), I'm not able to test the signed .bar file generated by ignoring the message above.

  Please can anyone suggest a solution for the question do face. Thanks in advance.

  Hey there,

  I see something like:

  "Skip ProjetTest to check, because the apk file has not changed."

  in my Console, but not in the error log.

  If it is in the console, it's just a normal journal letting you know that the tools didn't need to check again because the project, including the manifesto, has not changed quite significantly between runs you need to double check.

  Justin

• Deployment of Java Application on air not to read the ALX file?

  Hello

  I made a simple application in Java, using Blackberry JDE, I want to deploy OTA.

  I generated an ALX file using "Generate ALX file" in the menu "Project" Blackberry JDE after previously setting values in the properties for the project.  If I open my ALX file in Notepad, I can see my values in there.

  However, when I download my app (using a URL Pointant towards my.) JAD file on a web server), nothing of the ALX file appears in the download screen (version = 0,= seller,...).

  I found a post on this same forum indicating that I need to set values in the properties of the workspace instead.  I did... and it's working now, but I have access to change only the version number and the seller.  I don't have access to the application for title or the description of the application.

  On my web server, I copied the. JAD. JAR. COD and. ALX files.

  I would like to be able to specify a description of the application on the download screen, and see also the title of the app on the screen Options/Advanced Options/Applications.  At present, it seems that the file name of the. JAD file is used instead of the 'title' in the. ALX file.  When I go on my icon of the application, the title of the correct application appears.

  Am I missing something?

  Is there a way to do this?

  Thank you!

  BTW, I tested it with a real device (Storm 9530, OS 4.7)

  Only the JAD and cod use OTA Download.  The pot and the alx are not required.

  I would consider the information in the developer's Guide for deploying applications.  You will find a less readable for 4.7 online version here:

  http://docs.BlackBerry.com/en/developers/deliverables/7693/Distributing_BB_Java_Apps_over_wireless_n...

• How to set the ALX file for compatibility of the storm

  Well, he can't ' be that lasts.  How to set a value in the ALX file so that my application when it is installed by the Manager of funds an ALX and COD file, behaves like a native storm app?

  Anyone?

  Thank you

  Gerry

  I asked this before but never got a response from RIM.

  I guess that they neglected to provide a way to do it.

  Strike 3 for compatibility mode.

• Message error "the preconfiguration file has the wrong type of preset."

  I try to import the Preset brushes for newborn photography.  They are. Irtemplate files. I'm going in in my cc in Lightroom Develop Module, then opening presets Panel and hover the cursor over the user Presets.  I right click and choose "import".  So I find the real. The Irtemplate file and then click Import.  What I get is the above error message «the presets file has the wrong type of preset.»  What I am doing wrong?

  Predefined live (Windows): C:\Users\User Name\AppData\Roaming\Adobe\Lightroom\Local of adjustment presets.

  Presets to develop 'Global' live in: C:\Users\User Name\AppData\Roaming\Adobe\Lightroom\Develop Presets.

  Find your presets in the "Lightroom" file folders (similar to above) tab Preferences dialog - Presets > [show Lightroom Presets folder]

  Manually copy & paste your .lrtemplate files to the appropriate folder and restart Lightroom.

  Note: The folder [develop Presets] can tolerate and allows subfolders, the folder [Local adjustment presets] cannot.

  If only in the folder [Local adjustment presets] .lrtemplate files.

  

• How can Hi I get my cs5 to start working again? Suddenly, the serial number has become invalid

  How can Hi I get my cs5 to start working again? Suddenly, the serial number has become invalid

  If you purchased CS5, you should have the case (with serial number) and the original dvd or if you have purchased online, this serial number will be in your adobeID profile.

  If you have downloaded CS5 a few years back, you reinforced the installer?

  The serial number should work - contact adobe if you activation problems - it could be you have CS5 installed on more than two computers, the license only allows two facilities - if you are trying to install on a third computer, you will see a prompt to disable the software on other computers.

• Could not initialize Photoshop because the preferences file has been deleted

  Hello

  After a week without the help of photoshop, I can no longer open it. Whenever I try this message appears: "Failed to initialize Photoshop because the preferences file has been deleted."

  So, I went looking for this preference file that I never deleted and I'm not.

  I tried to reset photoshop with keyboard shortcuts preferences, it does not work. I have also uninstalled and reinstalled the software, it does not work either.

  What could I do?

  Thank you for your help.

  Only, I had to rename my Adobe photoshop CS6 settings file. It works perfectly now!

• Option 'Generate the ALX file' does not exist in Eclipse

  I'm under Eclipse 3.6.0 v 32 bits with the BlackBerry JDE Plugin v1.1.2.201004161203 - 16 on Windows 7 x 64 (I could not the 64 bit version of eclipse to work).  When I right click on the project in the Project Explorer, there is no option to "Generate ALX file" as say the tutorials I read there.

  When I installed the BB plugin to Eclipse, a prompt came up saying I need eclipse v3.5, and that it would be "update" (more like downgrade) me to this version.  Could be the problem?

  Everything has been working great.  I was able to compile and run in the Simulator without a hitch.  Its been actually quite a pleasant experience developed in this environment.  I just need to get this generated ALX file so that I can transfer my application on my phone for testing purposes.

  Any ideas?

  Thank you!

  in the application starts, you should see an xml type of the file in which to give the application title and icon of the application.

  in the same file to the upperside resembles tab, there is a drop down menu in which we select the 'yes' option to generate ALX.

• Could not open the backup files on a USB key

  I supported some (bkf) files on a USB key with XP. I transferred these files on another computer with XP. I can not open them on the other computer with XP and I can open them on the USB key.

  Hello sherbrookeqc,

  Before giving up on the .bkf files, look on the internet for the 3rd party software backup that restores the backup files in Windows XP. It could be your .bkf files are corrupted, but they may be recoverable using other sources.

  However, if the files are empty they may not be not recoverable.

  Good luck.

  Let us know if that helps.

• Eclipse plug-ins: generate ALX file has stopped working

  For some reason, the option generate ALX file is no longer works for me.

  He used to work, but for some reason any stopped.

  Everything is generated (.jar, .jad, .cod, .rapc)

  When you choose "Generate ALX file" (after a right click on the project), simply, nothing happens. The plugin does not create the file.

  I am at a loss! Why it stop working, and how do I make it work again?

  OK solved.

  The problem was that the readonly (because of our source control) .classpath file.

  Now that I've removed the read-only attribute, generate ALX file works again.

• The ALX files: Conversion Area51 ALX, STRANGE front engine install

  11.1.14 edit: I posted a more important here How - to's to drop the engine in A-51 standard:

  • More TOP TOP SECRET: Uncovering Area-51 of the largest (& best kept) Secret of all the
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/p/19604330/20691464#20691464

  

  -Original message-

  "Cloning the ALX Alien." My new Area-51 is due for a snack; here in my toolbox, I thought I'd try the motorization of the front panel to make it more ALX - ish. It is to disassemble the front panel, the strange motor mounting and installing the correct master i/o daughter card to power the motor. I call this one: operation Changeling. The new strange engine & Master i/o board arrived today, & updates will appear after foreign success *. Panel before motorized or bust...

  

  If your mio Board is missing upper left (son red/black, 4-pin) connector for the odd_motor, then you will need get a hint of mio ALX, who does not have the odd_motor connector

  

  

  **********************************

  Change 11.25.14

  

  Today my pair of 'parts' ALX panels arrived @ a killer case: 32 dolla / shipped for both. Manufacturer x504r. No, they were not easy to find, (no, they are not for sale either, lol). After seeing that I got to work, what I have in mind here is to make 'a good thing' to simply remove the top panel scratched each, & transferring the good top panel of the other as a spare part solid with or without problems to my ALX. Then, I'll remove the engine-Ribbon-switch, etc. from the 'bad', retained as a spare & recycle the damaged hull, that is not worth keeping.

  I present to you the photo & update here as proof that they are, I ran down to three in the last 6 weeks. Basically, carpet bomb anyone who sells parts w/a message from A - 51 if they have a known-working ALX panel for sale. Is they say yes, but it's just a little beat up - scratches / bumps - don't mention you're just motor & could care less what he "looks like to ': use some cosmetic problems there as leverage to get the price down. You could say: "it does make a lot of sense for me to replace my Panel ALX (lol, as if) w / one who has problems, but @ the right price, I'd be willing to give it a go; maybe try to make 'a good thing' of mine & yours... ok? If all goes well a stealth maneuver like this is help to bag one at a large or even crazy price. 1 I put in bag came from a guy just a motherboard stock selling: I messaged, asked if the case it came with was there with him, & if so if it could be separated outside too, so there's have it. You will need a good new alx master i/o board also, three different part #, everything will work in your A-51 stndrd & here, I tried to do a master i/o Board removal / replace guide in the middle of this post:

  • FWKNT v1.01 / CR1KN V1.01 / 604GC v2.0
  • http://en.community.Dell.com/Owners-Club/Alienware/f/3746/t/19523732

  I know it's rare, but sometimes you will see just the engine coming up for buying: If so, grab you it & as you see the weld in your own micro-switch, as a viable option. Other times, you'll see the available engine + Ribbon + switch: in this scenario, you might stumble it all-in- & if so, take note of how your Ribbon of old stndrd routes etc. can transfer the alx engine-Ribbon-switch on (if your snippets of 'transparent tape' that fix the Ribbon junk up in the process, you can buy clear "reinforced nylon of" sticky tape of CVS etc. to the new band on.) If you buy a full panel, maybe save your parts & throw the rest...