BlackBerry software Mapi Logon Failed

Similar Questions

• Link blackBerry problems blackberry software

  Earlier this week my blackberry software is no longer connected to my USB connected playbbok.  Today, it didn't connect to my Q10.  She is also not connected and all attempts will fail to connect.

  I reinstalled connected link Q10 and 1/2 hour later it is appeared and sunched, but also showed the error that it couldn't connect wirelessly.  Still does not see playbook, even if the playbook says that it is connected.

  If something has changed.  Old and new versions of link are the same - 1.1.1.32

  It worked OK before including wireless.

  Finally solved my problem by uninstalling with REVO uninstaller and then reinstall again. Previous registry entries have been properly cleaned this time around it seems!

• BlackBerry Smartphones MAPI OUTLOOK PUBLISHES TRYING to SINC. Help

  Updated to the latest version of the software and also took off sinc wireless as it would not sinc my contacts (laptop has no bluetooth) so after that and make the check box tick I now get a message telling me "Error synchronizing" then "MAPI logon has not. Please run Outlook with the selected 'Outlook' profile and then try again. »

  That means, I don't see profile in Outlook that I can choose? Help!

  Is no longer, I can sync any profile now, calendar, Memo, task not to mention contacts! help please, fuck to the site without it.

  Thank you

  Neil

  http://www.BlackBerryForums.com/rim-software/253387-archived-rim-desktop-software.html#post1744114

• Logon fails due to invalid login credentials

  Hello
  
  I get the following error only when I export, I'm trying to connect to Essbase. However, when I browse to target the mapping, I'm able to do. Worm 11.1.1.3 adapter ES11X-G4-E
  
  
  ERROR:
  Code............................................. 10403
  Description... Proceedings of Essbase API: Code [EsbLogin] cast: 1051293-1051293 - [Wed Jan 20 13:56:41 2010] Local / / / Error (1051293)
  
  Logon fails due to invalid login credentials
  Online: 128
  
  
  I tried with a few different Admin accounts, and I get the same error. All the thoughts/solutions?
  Thanks in advance.

  Hello

  Unfortunately for mapping navigation is not always a valid test. Some products that integrate the FDM with have what is called a "Dimension Cache" that are not active connections on the target system.

  You need to know what UserName/Password, you send to Essbase and test directly within Essbase for validity.

  First: -------------------------------------------
  Check the profiles of Machine in the FDM Workbench. If a name of user and password is defined in any profiles Machine is a global session opening and this information wrinkles too all and is passed to Essbase.

  Second: ----------------------------------------
  Check the settings and Application integration. They have what we call the "logon method" and "Global connection information" make sure logon method is set to unified if set to global then the connection information overall is passed to Essbase.

  Third: ---------------------------------------------
  If none of the above are true, then the user information is passed to Essbase.

  You want to make sure the configuration that you use in the order above and test appropriately.

  Hope this helps...

• the user profile Service service has no logon failed to load the user profile

  I received the following message when I try and log in my account to have:

  The user profile Service service has no logon failed to load the user profile

  What are my options?

  Hello

  1st thing to try is the system in safe mode restore to before the problem

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not solve it read more

  read the tutorial below

  http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  When you log on a Windows Vista-based or a Windows 7 computer by using a temporary profile, you receive the following error message:

  The user profile Service has not logon. User profile cannot be loaded.

  http://support.Microsoft.com/kb/947215#letmefixit

  Your user profile was not loaded correctly! You have been logged on with a temporary profile.

  http://support.Microsoft.com/kb/947242

  If you tried to log on to Windows and received an error message telling you that your user profile is damaged, you can try to fix it. You will need to create a new profile and then copy the files from the existing to the new profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

• Log: error message: "the service user profile service has no logon failed to load the user profile.

  Error message: "the service user profile service has no logon failed to load the user profile.

  Unable to connect.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947215#letmefixit

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• vWorkspace Powershell - find logon failed

  Does anyone know if it is possible to find logon failed "" for a machine through the Powershell cmdlets vWorkspace?

  As far as I know that there is no option for this in the get-qvwcomputer cmdlet and the qvwcomputer object.

  Thank you
  Hilbert

  Hi Hilbert,

  We will add this as a feature request! Thanks for the comments.

• Group Policy client service logon failed

  Tried to log on to the administrator account. Access denied. No access to my files.

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  If you are getting political group customer service logon failed access denied error then it could be related to administrator approval or if its parameters to get damaged.

  I suggest you see the below thread and see if it helps you to solve the problem.

  the Group Policy client service does not have logon

  The Customer Service of group policy does not logon, access is denied.

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• BlackBerry software not able to download Blackberry link

  Hello

  Last week I bought my Q10 (from Orange/Romania) and downloaded Blackberry Link (for Mac OS)

  I installed and used with my phone just fine.

  Yesterday, I had some problems with my phone and reinstall the OS. After that, she refused to connect to Link of BB somehow.

  After several attempts to get it working, I uninstalled Blackberry link and remove the software in order to download again.

  But surprise, when I press the button to download the BB link again, I received the following message (that I had last week when I downloaded the BB link for the first time):

  We're sorry...

  This software download is not yet available in your country for regulatory reasons. Please check for future availability.

  Please let me know what I did wrong. It is odd that the link is not available in a country where BB phones are available from the mobile operators.

  Thank you

  Cosmin

  Hey cosminium_10.

  Welcome to the community of BlackBerry Support Forums.

  There was an investigation into intermittent problems with the software download link from BlackBerry.com BlackBerry which took place yesterday.

  This problem has been reported as being solved by our internal teams and should now be available for download again. If you still receive the error message that it is not available in your country, please try to reload BlackBerry.com in your browser by pressing Command + Shift + R on Mac, or CTRL + F5 on Windows. You can also try clear all the cache of your browser, and then restart the application.

  I hope this helps. Please let me know if you still have problems to download the BlackBerry.com link BlackBerry software.

  See you soon.

• BlackBerry Software Desktop software components must be installed?

  Hey guys,.

  I'm going up to his presentation of the latest BlackBerry software link, which is now called BlackBerry Desktop Software. After you download the .exe file and run the regular configuration, it contains several components such as link, mix and device drivers.

  I am talking about the software for one e.g. Z10, Q10, jump etc (BB10 OS devices)

  Because we use and to use the mixture, I want to extract this component and only the deployment of others.

  Now, I am faced with different .msi files and I am trying to figgure on which of them are really necessary.

  There are:

  -BlackBerryDeviceManager.msi

  -BlackBerryCommunicationManager.msi

  Of course I could install the connection, connect a BlackBerry and see what happens (with one of these above probably nothing)

  Then install the Device Manager and check aso again... until it works

  BUT I want to know which of the above is required for what service.

  If someone out there who knows?

  Thanks in advance!

  Uh, I figgured out, both mentioned components are needed and a more:

  In conclusion, if you want to have a job entirely BlackBerry link, you must have the following components:

  -BlackBerryLink.msi

  -BlackBerryDeviceManager.msi

  -BlackBerryCommunicationManager.msi

  Each of them is the regular installation in the following directory:

  -Cache C:\ProgramData\Package

  Hope that help anyone ;-)

• Link to black berries for blackBerry software

  Hi can the blackberry software download link, the broser is delivered with following error message

  • Sorry, you have encountered an unexpected error, please contact [email protected] with error code (9002).

  wonder if anyone can let me know how to fix it,

  concerning

  Carlos

  @TyW Yes it works now, yesterday, sometimes it worked and sometimes it didn't.

• BlackBerry Smartphones Can I use BlackBerry software with version numbers > = 4.5

  I have the BB Curve 8320. Can I use BlackBerry software (Blackberry JDE, Director of office of BB, etc) with the version numbers > = 4.5 for my device.

  Yes, you can.

  Alternatively, you can use Desktop Manager version 4.6 and 4.7

• Re-setup of blackBerry Smartphones Blackberry software

  I had installed the Blackberry "BOLD" software on my computer, but as I already had a Treo 680 and not Outlook on my computer, I uninstalled the Blackberry software.  Installed Microsoft Outlook, and as I reinstall Blackberry software I received a pop up stating that... The system administrator has set policies to prevent this installation.  This is after I had received another pop up window... This Setup will perform an upgrade of ".". Do you want to continue? When the InstallShield Wizard has started, that the other pop-up window appeared.

  I am very new to the Blackberry.  These messages would be the result of once after having installed the software it is possible to install only one time on the computer?

  Hi wranglehurst and welcome to the forums!

  You wrote:

  "he had installed the Blackberry"BOLD"software on my computer.

  Are you talking about the desktop software manager or the device OS for you "BOLD"?

  If it's desktop software use this procedure to ensure that you get a good installation

  http://www.BlackBerry.com/BTSC/search.do?cmd=displayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub...

• Q10 of blackBerry software update failed

  I tried to update my software (version 10.2.1.2977), but every time I do it just indicates the update has failed. Access to internet is very good and it is connected to a power source, but nevertheless does not seem to work.

  Hello and welcome to the community!

  You did not reveal what software update method, you try, so I think that you try updating wireless on the device. I recommend to renounce this attempt and instead try the following:

  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-Smartphone/how-to-reload-your-Blackberry10-OS/t...
  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-BB10-OS-using-Sach...
  • http://supportforums.BlackBerry.com/T5/BlackBerry-10-OS-device-software/upgrading-OS10-devices-using...

  Good luck and let us know!

• Error blackBerry software - synchronization failed, impossible to deal with organizing data

  I had a Q10 Blackberry last week.  I downloaded and installed the PC of Blackberry link 1.2.2.13 version.  Two-way sync USB worked fine.  Now, all of a sudden, I get the error message "synchronization failed, impossible to deal with organizing data."   I tried to reset the synchronization options, but not joy.  Also tried to uninstall and reinstall the software Link 1.2.2.13, once again no joy.  Any suggestions?

  UPDATE: I spent 4 hours on the phone and the remote session with the help of Blackberry last night.  After doing some troubleshooting to isolate the problem, determined that something on the device caused the problem of Outlook synchronization. One thing I've learned, it's that it can take a long time to synchronize and even though the progress of the screen may appear frozen, let it go until the end - sometimes it took 20-25 minutes, but eventually completed. Here's the process we went through - I would recommend appellant help BB and work with them to make sure you have not accidentally delete Outlook contacts and calendar of important information of your PC or BB device!.

  (1) we tried an uninstall/reinstall the PC Link BB software and that did not fix the problem.

  (2) to isolate the problem of synchronization.  We first did a synchronization of 2 channels 'contacts' and 'calendar' and who was a failure.  Then did a synchronization of only 2 channels 'contacts' and managed.  Then did a synchronization of only 2-way 'calendar' and that was a failure - so the problem was linked to calendar data and something on the device has been the cause of the problem or corrupted.

  (3) link BB allowing us to make a backup complete unit.

  4) then decided to do a 'Wipe security' on the device of BB Q10 to erase all the data and settings and return to a clean boot device configuration.  I was nervous about it - make double sure that Outlook all contacts and calendar data on the device and the PC are completely backed up in case something bad happens.  Nothing serious happened, but I was gald, we made the backup!

  (5) has the 'Security Wipe' feature (on the device, the settings > Security and privacy > wipe security) and phone rebooted without problems (takes a while to do).
  

  (6) then used link BB to do a sync test 1 channel 'contacts and calendar' from PC to device.  It worked without problem.

  (7) we then used BB link do a "restore" full backup of device, as we did in step 3 above.  It takes a while to make and was a success.

  (8) once the restoration of the aircraft was complete, BB link configured to perform a synchronization of 2 channels of the two 'contacts' and 'calendar '.  Does the synchronization and was a success.  Did a test by adding the new entry of the calendar on PC and did another 2-way sync - all worked very well.  Seems that the problem has been corrected, but will follow in the coming days.

  Lessons learned:

  (1) If you have a lot of Outlook contacts and calendar entries, the synchronization may take a long time.  Be patient and let it run - even if it seems stuck, etc!

  (2) save all Outlook data on the device and the PC to make sure that you have a backup something bad happened during troubleshooting.  We had not something bad happens, but I was gald we made a backup anyway.

  (2) call BB help - support person, I worked with was fabulous, even if it took some time to work through a patch.