The application and library dependencies libraries

Similar Questions

• Y at - it somewhere I can find a list of items that is supposed to be running in activity monitor and those that should raise red flags?  I know the list varies depending on the applications and installed process but a base line would be nice

  Y at - it somewhere that I can find a list of explanations or definitions of applications that are running in the monitor of activity as well as a list of items that should raise red flags?  I realize account from the list will vary depending on the applications and programs installed and running, but it would be nice to have a base line of what should be expected and considered safe or normal.  There are too many items to research and one at a time.

  No, not so much.

  You have a problem you're trying to solve?

• How to return to the previous screen on Pre apps? THETE´s no back button... just close the application and start over?

  for example with text messages once im in a conversation can how to return to the screen with all my converdations? It's the same with any of the apps, West no way to go back? should I always close the app and start again to go to the previous screen?

  You must not yet be aware of the gesture «back» It goes like this, the straight shot, left on the gesture area (the area below the screen, left and right of the Center button). You enter only at half way, and you can start on the right edge, or just left of the Center button.

  Become very familiar with this gesture he used all the time.

  There is also an option that you can activate by allowing a complete sweep in any direction will take you to the adjacent open card. I think that this gesture is set to off by default.

  Good luck.

  PS - In the application of Navigation of Sprint, I can't seem to leave the navigation once it starts. In other words, you must close the application and open again to define a new topic. I know two ways to issue the command to stop the navigation, but none of them work effectively.

  Message edited by Mrolesen on 21/06/2009 20:17

• How to exit the application and jump to the top any screen battery by single click?

  Hello

  for example,.

  My application contains some screen battery and train to do a task,

  the user now wants to exit the application and go to the blackberry icon page.

  How can I do that.

  Thank you best regards &,.

  Narendra Shekhawat.

  Hello

  System.Exit (0);

  or UiApplication.getUiApplication.requestBackground ();

  Kind regards

  Jochen

• 'Versions of the application and the database do not match' on the comparison of the annex

  Moved the database to a Server 2003 to server in 2012.  This has been the only change PM receive the message "the application and the database of the versions do not match" when they try to make a comparison of the annex.

  Thanks for your help.  You have provided very concise solutions to my problem, I ended up having also do the following:

  Trip, click the password in the admim.cmd to ensure that the password has been set successfully and deleted the file BREBootStrap.xml (let it recreate itself)

• I downloaded the application, and all I get is a black screen. It will not start. What's wrong?

  I downloaded the application, and all I get is a black screen. It will not start what is wrong?

  Sign-in black screen | Creative cloud desktop application

• Hi, I am Ganesh, I tried to installed the application using creative cloud. But seems it's taking too long to install the application and it is hit. After the installation of 42%. Still, I tried to restart my computer and re-install the application. But i

  Hi, I am Ganesh, I tried to installed the application using creative cloud. But seems it's taking too long to install the application and it is hit. After the installation of 42%. Still, I tried to restart my computer and re-install the application. But it is keep taking so long time and struck at the end of the installation of 42%.

  If the installation process is stalled at 42 percent with no possibility of error, there is a problem with the zipped file to Extraction of downloaded in the Temp folder.

  As a fundamental step. Leave the creative Cloud desktop application.

  Delete the contents of the Temp folder:

  Optional: it will be ideal to install software like Winrar, WinZip or 7-zip,., etc.

  Please press Windows + R and you will get a command window run, get hit and type %temp%.

  Delete all the content inside the temp folder.

  
  

  
  Then try again to install application InDesign CC again.

  Just in case, if you are still having the same issue.

  Creative application cloud thus released, do not close it.

  Open the Temp folder, then search for the CC InDesign installation file and copy it to the desktop computer.

  Then leave Creative Cloud application and try to install.

• Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be

  Initially, I downloaded the application and was able to access all my photos by album, photostream, fb, etc.. Now, it will not go all. After you remove the application and try to download it, it says that I have to pay for it (yet) any help would be appreciated.

  Sounds like a question of verification on any market that you have bought PS Touch. Have you tried contacting Google and Apple to see what they say?

• Cannot install point. Restart the application and re-download your purchase.

  We have an application published with two folios in there. Several users have complained that when they try to update the app, they get this error: "cannot install point. Please restart the application and download your new purchase. "I have NOT been able to reproduce this error on 4 different iPads. However, I have 3 users who receive this error whenever they try to update the folio.

  They tried to remove the app and reinstall. The same problem.

  They tried several different WiFi FORT connections, same problem.

  A user came to my office. We have updated the app on my iPad. Worked well. Tried it on his iPad. Got the error. Same WiFi connection within minutes following one another.

  What is going on?!!!

  Adobe has released a series of patches for viewers to iOS to handle this problem, you have described. V31 V32 these patches and are in need of an update. Knowing that your application is v29, v32 app you just submit you should be fine.

• DataControls to consume the application and the library working individually ADF

  Hi all

  need advice.

  JDev 11.1.2.4

  Integrated WebLogic

  My requirement:

  I want to create a reusable component that I can use in different applications. This reusable component must have a table ADF wherein I can do CRUD operations based on an input value.

  For this I created an ADF with stubborn taskflow application that has input parameters.

  I created the EO, the VO and her I'm in the model layer and controls using data, I created the table of the ADF inside the stubborn taskflow jsff page.

  I have a method call before the page to make the pre treatment.

  I created the ADF of Jar file library of the ViewController project with the release of generation of model project.

  I added this ADF Lib pot file to the consumer through the range of resources demand.

  Usage application has its own control Module of the Application data.

  So now, in the consumer application, I can see the two data controls, second in the ADF lib pot.

  I have a page in the application consumer with two things,

  1. a form I created using the control data of the Application Module consumes,

  2. a table I created using the taskflow bounded as a region of ADF library Jar file,

  Now am not able to save the form data and the table using the data control consume Application Module validation operation. Using individual validation operations, they work. Having said that, that my request has two working both datacontrols that says two transactions.

  My question is, if the approach I took for my requirement is correct or not. If not, please give me the right to another approach help me with the solution to my problem.

  Please let me know if you want more details.

  Thank you

  BSBhat.

  If you do not want to use individual validation operations then you must use 'management of the transaction ADF task flows', you can define under options on your narrow-minded taskflow and test your usecase.

  -> set Transaction "always start the new transaction.

  -> set Taskflowreturn component > behavior > final commit Transaction property.

  This will take care of transactions for the AM of the same application and AM of the ADF libraries.

  I hope this helps.

  ~ Judy Sai.

• Receiver 907 cod invalid after UpdateJad on the main application and library

  Hello world

  To distribute my BlackBerry live app (OTA) in the past, I would pack my main application, MyApp, and package a linked library application, MyLibrary, containing the main application resources separately.  I then copy the JAD/COD in demand for library files in the same directory as the JAD/COD of the main application files and run UpdateJad.exe on MyApp.jad and MyLibrary.jad.  At this point, I would download all the files on my web server (with the correct .htaccess file) and I could download my application on devices without problem.

  It was some time ago (one or two years).  Now, I'm updating my app and try to do it again.  However, I noticed that when I have my main application, Eclipse generates files JAD/COD for BOTH the application of the library AND the main application in the same directory of the main project of the application (deliverables > Web > 7.1.0).)  I don't think what happened in the past.  This directory contains now:

  • COD for MyApp files
  • Files of COD to MyLibrary
  • MyApp.jad
  • MyLibrary.jad
  • MyApp_full.jad (I don't remember this being produced in the past, either)

  Now, I tried to download my application in several ways, and each way gives an invalid "907 COD: error

  • Download the generated directory-is (and trying to download MyApp.jad AND MyApp_full.jad)
  • UpdateJad.exe running on MyApp.jad and MyLibrary.jad
  • UpdateJad.exe running on MyApp_full.jad and MyLibrary.jad
  • Only copies files from the generated directory MyApp and combining them into a new directory with the generated files to the separate project MyLibrary, packed (and UpdateJad.exe running on MyApp.jad and MyLibrary.jad)
  • etc... I tried practically all combinations.

  But nothing works!  However, if I install the application via MyApp.alx via BlackBerry Desktop Manager, it works.  Anyone know what could be going on here?

  Thank you!

  Hi peterstrange,

  I think I solved the problem.  I realized that I had problems downloading files on my Web server over the last two days with my standard FTP clients.  Once I downloaded the JAD/COD files to another web server, the download and the installation worked without problem (using MyApp_full.jad).

  I appreciate your prompt response to help!

• Assistance needed for the registration of the application and store the values in a table

  Hello

  Hope that this explanation is not confusing. I explained my application you want in the text below and also attached a skeleton VI + screenshot hoping that he will clarify

  I try to do a VI that does the following:
  1. some code (blue Subvi) runs every 200ms
  2. every 200ms, a random number is generated
  3. the random numbers are stored in a table in intervals of time s 0.8 ("iterations")
  4. at any time, the (blue Subvi) code needs to have access to the random numbers generated in 'the previous iteration.

  To clarify, the iterations are as follows:
  Iteration #1: 0 - 1.8 s
  Iteration #2: 2 - 2. 8 s
  Iteration #3: 3 - 3.8 s

  Iteration #4: 4 - 4.8 s
  ..
  And so on...

  So for each iteration: the blue (Subvi) needs to have access to the random numbers generated in the previous iteration, for example:

  Iteration #1 (0 - 1.8 s): The blue (Subvi) Gets an array that contains only the zero (random numbers are recorded for the first time)
  Iteration #2 (2s - 2 8 s): The code gets an array containing random numbers of iteration #1
  Iteration #3 (3 s - s 3.8): the code gets an array containing random numbers of iteration #2
  Iteration #4 (3 s - s 3.8): the code gets an array containing random numbers of iteration #3
  ..
  And so on...

  At any given time in time;
  -The code gets an array that contains all the random, recorded during the previous iteration numbers
  -Values since before her previous iteration are ignored and not stored anywhere

  Thus, for example, to the #7 iteration:

  -The values during the iteration #6 are made available to the code in the form of a table

  -Values of #1 to #5 iterations have been deleted and not stored anywhere

  It is important that all values since before recording the previous iteration are deleted because they are not necessary because VI actaual will work for a long period of storage of numbers a lot more than I have indicated here

  Screenshot of the skeleton VI:

  

  I tried to play with the paintings, the structures of the case and the registers at offset, but everytime I try I get something wrong

  The skeleton VI is also attached (Iteration_VI and Code_SubVI)

  Any suggestions?

  Thank you!

  Yes, I agree that you need help.  First of all, you really do need to learn more about LabVIEW - spend a few hours with the tutorials, such as those mentioned on the first page of the Forums.  Oops - links to the tutorials which had been present for years seem to have been moved "elsewhere" with August 2016 LabVIEW community reorganization.  But look for them...

  Here are a few screws that basically implement what I described above (with some minor modifications).  First of all, this is a Top level VI which runs at 5 Hz (200 msec waits).  It starts with an array of 5 elements of 0, then once per second, this is replaced by a table of random numbers generated by the Random 5-table sub - VI 5 elements.  Note that I do not use a loop timed - those who are really designed for LabVIEW RT, but use the simplest functions on the Palette of the timer.

  

  Can't you see how that works?  The array to initialize on the left begins you with a table of 5 elements of 0.  The Timer inside the loop, it runs at 5 Hz, 'Index' counts 1, 2, 3,... to tell you where you are, and 5 shows you everything that lives on the shift register.

  Now sub - VI Random 5-table is supposed to do the following - if she was called to 5, 10, 15,..., it must return a (new) array of 5 random numbers, otherwise, it must return the array that was passed in.  So if all "works", table 5 shows 0, 0, 0, 0, 0 for the first second, a table at random for the second second (which is not superfluous!), a different for the third random picture second and so on.  I have already said a way to build this, but I chose a slightly different method (equivalent).

  

  Whenever it is called, a new random element is generated and added at the end of a (growing) random table stored in the shift register.  If size become 5, we send this Random-table-of-5 out through Out table and reset the register shift to an empty array.

  The case by default (when the size is not equal to 5) is shown below - we just return the array of entry to and accumulate new random table in full growth.

  

  These code fragments extracted from VI.  If you have LabVIEW 2016 (see the "2016" at the top right of the image?  This shows that it is a snippet of code LabVIEW 2016), you can open a blank diagram and drag this image, where magic OR converts it to a VI.  Otherwise, the code yourself and try out it.

  Caution - it is designed to run once.  If you run the program of high level, a second time, you may find that the new Random 5 - table appears to 0.4 ", 1.4", 2.4"(instead of 1", 2 ", 3").  I leave as an exercise for understand you to (a) why he is and (b) fix the code.  If you can't do that, then move an another 3-4 hours with the LabVIEW tutorials (or start playing with this code, edit it in some small way and to understand how it works).

  Bob Schor

• What is a directory of the application and how do I install/copy inside binkw32.dll?

  OK... the first thing is that I installed a game... works very well.

  I then tried to open one of my friends mods... nothing happened. He said he had to be reinstalled... so after many hours, I found a way to do it. but it usually always open. I now get a message saying that it must be installed in the application directory.

  I need assistance in detail please... not very good with this stuff I don't want to spoil it im.

  -What game?
  «' ' ' Exact error message?»» "»
  -Is Windows 7 ccompatible?

  Directory of the app in this case (similar) would be the "system32" directory that houses all of the .dll files.

  System32 = C:\Windows\system32

  You can just download the files "binkw32.dll" from a site (absolutely), you trust and drop it into the system32 folder.

  Note that downloading the files .dll from other sites has its own drawbacks.

  Or reinstall the game. Install as "admin" - right click on the installer and choose 'run as administrator '.

  If the game is not compatible Windows 7, try to install in compatibility mode XP/Vista:

  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

  MRI!

• None of the applications and games for Wrv210 router

  I just got a new WRV210 router yesterday. The wireless and everything works fine but I need to host again on Warcraft 3. On my last router it was easy, I just went to 192.168.1.1 and volla applications and games link was on top. On this new router it not yet displayed. I searched for this answer for about 4 hours and im about to give up. Please help if possible it is really frustrating me.

  As I remember, the model number of your router falls under the devices of the series of cases. I also believe that there are different web interface. If you are looking for port forwarding to allow you to open the ports for your games, you can access the user interface and then go to the Firewall tab, then select Port Forwarding (secondary tab). It works as an Application and games for the regular Linksys router.

• BRANDING: Dynamically change the icon of the Application and App images

  I want to be able to my trade mark application such that the icon of the application depends on the Registrant and/or some download settings - and thus limit the build that I maintain in a single generation.

  For example, someone downloads the application of a link to company X, so that when it is installed on their smartphone there the icon title and app for company X.  The icon and title vary according to the download (perhaps through the query string values).

  Is this even possible, and if not is - can anyone think of another approach?  An idea I had was to have the user to enter a record value which would cause then a different resource file take effect, but do not know how is there to take to do this.

  Take a look at 'net.rim.blackberry.api.homescreen.HomeScreen', he could not do what you want, but it can change the icons and the names of your application.