The application crashes; I just had to buy it and got lightroom 6.

Similar Questions

• a white screen and then the application crashes

  When I go to my iPhone mail app, there is just a white screen. Sometimes after a few seconds, the application crashes. I can't delete the app because it seems to be "built in". My mail works fine on the MacBook Pro and iPad. I tried all the suggestions on the forum.

  1. Warm reboot
  2. Toggle the settings of the aircraft
  3. Supprimer delete accounts, and then add them again
  4. Recover from a previous backup
  5. Hard Reset then retrieve

  Nothing effects mail app it seems be frozen piloted to white, so double-click on the "home" button I see the screen of e-mail in the list, but it is old age and if I select mail it displays the old page but all frozen. How can reset my mail without going through the whole hard reset, process to recover again everything seems to work.

  Update to iOS 9.3.2.

  Reset your network settings. Power cycle your iDevice.

  This should help.

• Note the application crashes...

  Note the application crashes... I have discovered that by putting my phone on "airplane mode" the app not crushed. This makes me think that there may be a conflict with the iCloud? I tried to restart but the problem persists...  Anyone has a solution, pleas?

  Hello, Craig2099!

  Thank you for reaching out by Apple Support communities. After reading your post, I understand that your Notes application to close unexpectedly when you try to use it. I keep a lot of information in the Notes, so I know it's important to be able to access the app. I'd be happy to help you!

  I have some troubleshooting I suggest to go through. Before you start, I recommend you make a backup of your iPhone by following the instructions here: How to backup your iPhone, iPad and iPod touch

  Once your backup is created, go through the following steps, in order. Test after each step, stopping when the problem is resolved.

  1. Leaving the app all opened, as shown here:force a nearby application on your iPhone, iPad or iPod touch

     Then, restart your iPhone after this article: restart your iPad, iPhone or iPod touch

  2. Uninstall the Notes application, and then reinstall it. Instructions on how to do this can be found here: remove the apps Apple integrated from the home screen on your device iOS with iOS 10
  3. Reset settings on your iPhone in settings > general > reset > reset all settings. This will not delete your personal data (like contacts, photos, calendar of events, etc.), but he'll be back customizable settings (as your background screen and display brightness, sounds of alert and ringtones, settings of Date and time, etc.) to the factory settings. It will also remove saved networks Wi - Fi and passwords, as well as all the VPN or APN settings used previously.
  4. Restore your iPhone settings by following the steps here: use iTunes on your Mac or PC to restore the iPhone, iPad, or iPod touch to factory settings

     Once the restore is complete, configure your iPhone as a new device (i.e. without using your backup, at least temporarily). You can connect to iCloud iMessage, FaceTime and iTunes and the App Store. Then test Notes. If it works and not unexpectedly ends, you can restore your backup by following the steps described here: restore your iPhone, iPad or iPod touch from a backup

  See you soon!

• CanvasClear causes the application crash

  I use a simple rectangular control canvas with movement indicator (Vshape) that displays the currently measured value.

  The value is updated 10 to 14 times per second, and deliberately, I made these values fluctuate.

  The canvas is filled with gradient colors (5 ranges) and the indicator moves upwards or downwards. In order to redraw the indicator,

  I use CanvasClear with the VAL_ENTIRE_OBJECT attribute and then redraws its content.  A few days ago, I noticed,

  that the software crashed, when the Panel containing the canvas control, was behind another window (belonging to an another SW

  tell the programmers Notepad or msword). I was able to reproduce the crash, which occurred immediately, but

  After that the software worked anywhere from 0.5 to 5 hours and the questionable control was behind another window.

  I also have seen, before the accident, if I move the window covering away from the canvas control, rectangle covered

  becomes black (break in non-se mode, it remains white) and it takes several seconds to redraw the partial region.

  Sometimes I noticed irregular elements (a diagonal line, not planned, from the left corner down to the right).

  Labwindows2010 IDE always shows crash-point as a call to CanvasClear().

  None of the functions, manipulating the canvas control, the return of negative values, because the software checks to see if it and if found newspapers a

  appropriate message. The canvas control has to draw political as mark for update.

  Does anyone has an idea how to everyone such instability or how to solve this problem?

  I was also able to capture the call stack and dismantling:

  Unhandled exception at 0x6850226E (cvirte.dll) in sw_dbg.exe: 0xC0000005: breach of access writing location 0 x 00000000.
  6850226E

  68502258 or eax, 0C00h
  6850225D mov dword ptr [esp + 50 h], eax
  fldcw 68502261 word ptr [esp + h 50]
  fistp 68502265 dword ptr [esp + h 50]
  movzx 68502269 eax, byte ptr [esp + h 50]
  6850226E mov byte ptr [esi], al / / the esi content is 0
  movzx ecx 68502270, byte ptr [edi]
  fldcw 68502273 word ptr [esp + h 54]
  68502277 imul ecx, ebx
  6850227A mov dword ptr [esp + 50 h], ecx
  6850227E fild dword ptr [esp + h 50]
  68502282 fdiv qword ptr ds: [68802D40h]
  68502288 fadd qword ptr ds: [68802D38h]
  6850228E ptsps qword ptr [esp]
  68502291 call 687D 5950

  Call stack:

  cvirte.dll! (6850226e)
  [Frames below are may be incorrect and/or missing, no symbols loaded for cvirte.dll]
  cvirte.dll! 684d149c)
  cvirte.dll! 687b036c)
  cvirte.dll! 687b09c2)
  cvirte.dll! 684d9759)
  cvirte.dll! 684d9981)
  cvirte.dll! 687b 5850)
  cvirte.dll! 687bc167)
  cvirte.dll! 687bd40f)
  User32.dll! 7674c4e7)
  User32.dll! 7674c5e7)
  User32.dll! 7674c590)
  User32.dll! 76744f0e)
  User32.dll! 76744f7d)
  ntdll.dll! 779c6fce)
  User32.dll! 76744ec3)
  User32.dll! 76741be4)
  User32.dll! 7673ffcd)
  cvirte.dll! 687c13c1)
  cvirte.dll! (68483419)
  cvirte.dll! (68722687)
  cvirte.dll! (68729882)
  cvirte.dll! 68525b8b)
  cvirte.dll! 686042a 6)
  cvirte.dll! 6846d7dd)
  cvirte.dll! 68557bcc)
  sw_dbg.exe! (00402470)

  Sorry for the delay in response. I followed a red herring for a few hours when troubleshooting this. It turns out that this could have been resolved much more quickly using the resource followed in CVI. If you have the full development system, you can change the compiler Options > debug to cabins lying level and then open the window > Resource Tracking. This will show you all the memory and handles your code currently open. It will appear when the elements are created, changed, or destroyed. Looking at it when your application is running (you need to suspend execution at a breakpoint to see the tracking of resources), you will see that the program continues to create plots that belong to the curve of the COLORSCALE. It is your intensity graph. If you look at using the function for PlotIntensity, he recalled in a note that a new trace is created every time that you call this function, and you want to get rid of these plots with DeleteGraphPlot.

  You can add something like this in InitScaleData.

  if(plotHandle != 0)
  {
          DeleteGraphPlot (IndicatorPanel(0), IND_COMP_COLORSCALE, plotHandle, VAL_DELAYED_DRAW);
  }
  plotHandle = PlotIntensity (IndicatorPanel(0), IND_COMP_COLORSCALE, scaleArray, 2, OGL_SCHEME, VAL_DOUBLE, gColorMap,gColorMap[OGL_SCHEME-1].color, OGL_SCHEME, 1, 1);
  

  I don't think you run necessarily in a memory problem here throwing the parcels. Intensity plots use rather a small number of GDI handles. In Windows Vista and 7, the number of GDI handles is limited to 10,000 by a Windows registry key. I look at the number of open GDI handles in the process Explorer reveals that 10000 handles were open when the application crashed on my system after about 45 minutes of execution.

  Let me know if it works if you have a chance to try this solution.

• Call any thread DLLs the application crashes

  I have a built in 2015-labview application that acquires spectra of 6 spectrometers via an external dll. The dll triggers an event in labview when data is ready to be pulled from the spectrometers. Since this event, I am running a reentry no void / vi which contains a node function to retrieve the data, that are configured to run in any thread, as it gives a drastic improvement of performance as apposed to run in the UI thread.

  However this can slow down the application crash with a message from windows like the following journal:

  Name of the failing application: axiom 2.0.exe, version: 1.0.0.82, time stamp: 0x5581a6b7
  The failed module name: lvrt.dll, version: 15.0.0.4024, time stamp: 0x5581ac03
  Exception code: 0xc0000005
  Offset: 0x0000000000bec7c0
  ID of the process failed: 0x15c0
  Start time of application vulnerabilities: 0x01d11e6face9febd
  The failing application path: C:\Axiom 2.0\builds\Axiom 2.0\Axiom 2.0.exe
  Path of the failing module: C:\Program NIUninstaller Instruments\Shared\LabVIEW Run-Time\2015\lvrt.dll
  Report ID: 7d4ef3a8-8a91-11e5-94e9-90b11c894ef8

  I don't know if the dll is said to be thread safe or not. Also I do not understand how this causes a problem anyway since it is the only node that accesses the dll at the time, and each of the 6 spectrometers are interviewed in order?

  Is there anyway that I can still enjoy the benefits that the call of any thread dll provides without causing my application crash.

  An example of the increase in performance, it's that I can query the spectrometer from 6 to 70-80 Hz when configured to run in any thread, as opposed to a simple 10 Hz when the Run value in the UI thread.

  Thank you

  Jimmy01 wrote:

  I don't know if the dll is said to be thread safe or not. Also I do not understand how this causes a problem anyway since it is the only node that accesses the dll at the time, and each of the 6 spectrometers are interviewed in order?

  Is there anyway that I can still enjoy the benefits that the call of any thread dll provides without causing my application crash.

  Looks like that the DLL is not thread-safe. If you do not run in the UI thread, there is no guarantee that the DLL will be always called from the same thread, even if you only call it in one no reentrante Subvi. By default, LabVIEW allocates multiple threads by the enforcement system, with the exception of the user interface. If the DLL stores certain information of one call to the other, this context can be lost when run in a different thread.

  Here's a thread that provides two possible solutions; a wrapper DLL is required, use the other the utility 'threadconfig' (or the corresponding INI file settings) to force a subsystem of a thread executing unique http://forums.ni.com/t5/LabVIEW/Force-DLLs-to-tun-in-the-same-thread-expect-the-UI-Thread/td-p/11438...

  Another option would be to put the call to the DLL in a timed loop that runs constantly, and you can use a queue or the notifier to pass data to. A timed loop runs in a single dedicated thread, so I think it will work.

• When you click on the 'Info' to the background action bar button, the application crashes.

  Hello

  Recently, we have brought successfully a BlackBerry 10 Android app.

  Everything worked fine, except the thing that when you click on the "Info" button in the action bar that appears at the bottom of the screen - the application crashes.

  I guess that this button should display a connection, or the help page. In our application, we have such a page (like an ActionItem in the ActionBar).

  Yes, is there a way we can fix it, so that when clicking on "Info" button to view our about page? Or at least to do something to prevent the application from crashing, for example hide this button.

  PS: We tested the app in the simulator of Alpha BB 10 Dev.

  Thank you.

  Hello

  Thank you for your comments. In fact, it is a known problem in the current Runtime Android on the Simulator release BlackBerry 10. It has nothing to do with your application, as this action bar fits into the Runtime Android and not your application. Normally when you section the 'Info' button you will see a screen showing you must use the gesture of back scanning used in applications Android Runtime. If you want your own topic button, you need to create your own menu.

  See you soon,.

  Matt

• Clicking on one in first Pro 2015 masking tools will make the application crash. Why?

  Hello!

  I use Adobe first Pro CC 2015 on a Macbook Pro retina, model with 8 GB ram and OS X El Capitan Beta at the end of 2013.

  Whenever I click on any of the masking tools, be it, circle, curved square or Béziers, it makes the application crash.

  No idea why?

  Something to do with my ram capacity? Or El Capitan? Because with the Mavericks, I could hide without any problem.

  Can anyone help, thanks a lot!

  Hello

  Maybe it's not your RAM that is causing the problem, but the beta version of EL Capitan, which is undergoing trials of phase and so is Adobe with Apple's new OS applications. So, we can not provide legitimate action to perform on the beta version.

  If please wait patiently for the official release of Apple OS and hope that all applicvations works perfectly.

  Vinay

• How to disassemble volumes if the application crashes.

  Hello

  I'm opening a vmdk file and mounting of volumes using the code below

  m_vixError = VixDiskLib_Open)
  m_vixDiskLibCon,
  file name,
  VIXDISKLIB_FLAG_OPEN_UNBUFFERED,
  (& m_vixDiskLibHandle);
  
  m_vixError = VixMntapi_OpenDiskSet)
  & m_vixDiskLibHandle,
  1,
  0,
  (& m_vixDiskSetHandle);

  m_vixError = VixMntapi_GetVolumeHandles)
  m_vixDiskSetHandle,
  & m_numberOfVolumes,
  (& m_vixVolumeHandle);

  
  for (int i = 0; i < m_numberOfVolumes; i ++)
  {
  m_vixError = VixMntapi_MountVolume (m_vixVolumeHandle [i], FALSE);
  }

  Do an operation here...

  
  ....... How to unmount the volumes and close the disc runs if the application CRASHES here.......

  Normally I use the functions below to unmount volumes and handles closing disc

  VixMntapi_DismountVolume (m_vixVolumeHandle [i], TRUE);
  VixMntapi_FreeVolumeHandles (m_vixVolumeHandle);
  VixMntapi_CloseDiskSet (m_vixDiskSetHandle);
  VixDiskLib_Close (CVMDKFileRestore::vmdkVixDiskLibHandle.find (it-> first)-> second);

  Thank you

  Mathieu

  Hi Mathieu,

  In response to your message here (please do not cross post between different discussions)

  Finally :-)))

  I think that the chances are good that there is a light at the end of the tunnel - at least about your problem to disassemble.

  In the scenario above, if I try to mount the vmdk file after the crash that above, I get the following error message

  Read error: the specified virtual disk needs to be repaired

  I was hoping that you would report this error. Unfortunately, I'm currently not behind my development computer, which means that I don't have the VDDK header files available now, but if I remember correctly, there must be a function named VixDiskLib_CheckRepair (...) in vixDiskLib.h. Take a look at it and his PhD students. This should be the function you're looking for. The thing is that this function erases the unclean shutdown set in the hard stop dirty file indicator. Unclean shutdown as a result of the crash.

  As soon as I'm back behind my development machine, I'll send you an extract from my mount test routine that is exactly about the flag unclean shutdonw via (...) VixDiskLib_CheckRepair.

  Hang on, I'll be back in about 10 hours ;-)

  --

  Thomas G.

• I just had to buy a new computer because my 'vintage' Mac died. After migrating my backup on my creative suite Adobe drive, is no longer wroks I get an error 150:30 code HELP!

  I just had to buy a new computer because my 'vintage' Mac died. After you migrate my backup on my new mac book drive my Adobe CS is no longer in effect. I get an error 150:30 HELP code!

  You will need to reinstall correctly, do not use migration.

  Mylenium

• Today I received a phone call from 'Human IT Solutions'. The operator said that I had reported an error and asked me to log in

  Original title: ERROR REPORT FIX - HUMAN IT SOLUTIONS.

  Today I received a phone call from 'Human IT Solutions'.  The operator said that I had reported an error and asked me to log in and follow his instructions, as it was a very simple matter to deal with.  I typed in the flag of MS, "rt" track: this opened the window "run" in which I typed in 'eventvwr' followed by 'OK '.  This opened "Event Viewer".  At this point I told him I was not willing to go far and he didn't send me the "fix."  He said that his company had no authorization to send emails and our conversation ended.  I tried to inform Microsoft, but of course all their facilities help for XP are now US only and I couldn't find any way to inform them (I think they should know, and anyway, if it is a genuine appeal, it might be good to have).  Anyone got any ideas on the question of whether I have done the right thing or how to say MS?

  ADF

  Original title: ERROR REPORT FIX - HUMAN IT SOLUTIONS.

  Today I received a phone call from 'Human IT Solutions'.  The operator said that I had reported an error and asked me to log in and follow his instructions, as it was a very simple matter to deal with.  I typed in the flag of MS, "rt" track: this opened the window "run" in which I typed in 'eventvwr' followed by 'OK '.  This opened "Event Viewer".  At this point I told him I was not willing to go far and he didn't send me the "fix."  He said that his company had no authorization to send emails and our conversation ended.  I tried to inform Microsoft, but of course all their facilities help for XP are now US only and I couldn't find any way to inform them (I think they should know, and anyway, if it is a genuine appeal, it might be good to have).  Anyone got any ideas on the question of whether I have done the right thing or how to say MS?

  ADF

  ADF, I received today a similar appeal.  When I questioned his information on the company, he was very defensive and said "I have no cold calling, I'm in East London" I asked him to give me the name of the software MS causing errors, during which he compiled a long list of file extensions and avoided the question.  When I asked her name and phone number so I can get my husband to call him back, he began to read a number on phone, but the figures '0-1', the line was cut off.

  I'm sure you made the right choice in putting an end to the conversation of what I lived today.  I have no idea how you would report to Microsoft, but wanted a response to you here to support your actions!

• I want to use my Lightroom 5 to index my slide collection architects who are now safely scanned on my new Mac in the images folder in the Finder. Previously, I had started to put these in Lightroom but decided to change the line

  I want to use my Lightroom 5 to index my slide collection architects who are now safely scanned on my new Mac in the images folder in the Finder. Previously I had successfully started putting these in Lightroom, but decided to change the format of deposit and deleted (I think) all these previous efforts of Lightroom. On my computer, now I would like to, but when I open Lightroom to try to import them from my computer, the Destination Lightroom Panel does not appear. What I am doing wrong?

  Robert alanb48311052 says:

  On my computer, now I would like to, but when I open Lightroom to try to import them from my computer, the Destination Lightroom Panel does not appear. What I am doing wrong?

  The Destination Panel does not appear? Try right click on one of the other names of Panel on the right side of the import dialog box and select Destination.

• The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  
  

  Hi Marcelo,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• How to fix the missing lines of text and formatting lost, hyphenated words and text disturbed flow, after the conversion of PDF in word doc to allow editing? using WPS office application on Android Galaxy tablet. tried Polaris app and got a blank document

  How to fix the missing text and updated lines shaped, hyphenated words and patterns disrupted, lost after export PDF document to word doc to allow editing? using WPS office application on Android Galaxy tablet. tried Polaris app and got a blank document.

  Thank you!

  Hi Spider,

  Adobe Acrobat on mobile devices can be used for editing. I will suggest you to perform the task on PC or Mac.

  Thank you

  Abhishek

• I bought the student of Photoshop C6 at Best Buy version and installed on an iMAC intel processor.  How to get software key for resettlement.

  I bought the student of Photoshop C6 from Best Buy version and installed on an iMAC intel processor.  The hard drive is faulty and needs to be changed which will require me to reinstall Photoshop C6 on the new hard drive then replace it.  How can I find the numbers that I have to (software key etc.) install the software on my new hard drive.  I have the Photoshop C6 disc with the top software

  but none of the numbers.

  See here: find the serial number of your product Adobe quickly

• I tried to remove and reinstall Lightroom 5 and have the same problems. I was chatting last night and got a reinstall. This me the shortcut is broken and when I open it directly it asks me my serial number. I did that last night.

  I got Lightroom successfully to open, it does not show my SD reader. I added the reader SD (folder) and it opened some pictures, but then opened an old catalog. I tried again and got grey thumbnails with correct Canon file numbers but not images. When I chose import, he opened an old catalog and began to convert it. I recently had the creative cloud subscription and I can open these photos here after pinning.  The problem is, I don't have the time to understand Photoshop until I need these photos.

  What do you mean that you can open photos "after pinning? Could you please try to specify your problem a bit more? One thing I can tell you, is that you can not activate creative Lightroom of the Cloud with a serial number. There is no serial number for the creative cloud version. It must be installed from the application cloud Creative Manager. You will need to uninstall Lightroom and then reinstall it from the application manager. Other than that, please explain in detail and more clearly what your problem is.