The ASA to use a different Port SSH

Similar Questions

• Installation of connectors of the IOM by using a different name.

  Hello
  
  
  In my environment of IOM, I have two target resources which are directories of Sun.
  
  In my env IOM, I installed a 9.0.4.12 connector SJSDS (version of IOM is 9.1.0.2). The output of the connector box names all artifacts IOM using the convention IPLANET or IPNT (UD_IPNT_USR, adpIPLANETMODIFYUSER, etc.).
  
  Since I want two instances of this connector, I need to use a different name. To customize this name that I need to change the xml (iPlanetResourceObject.xml, iPlanetXLResourceObject.xml) files? Seems very tedious and prone to error.
  
  Is that what someone does that, you can share your experiences.
  
  Thank you
  Sunny

  This is a very common method to enable support of multiple areas AD (with different numbers).

  It is tedious and prone, but this is the simplest way to achieve this. You should consider writing some XSLT to automate parts of the process.

  Best regards
  / Martin

• The ASA can use 2 dynamic cryptographic cards on the external interface?

  We have an ASA which is currently used with dynamic VPN. I don't know the pre-shared key.  If I was going to try to create another card encryption. I did not want to bring another drop.  I know that the router does not allow.  It would replace the existing info.  I wasn't sure of the SAA.

  David,

  The pre shared key is defined in the specific tunnel-group, not in the crypto map.

  tunnel-group ipsec-attributes

  pre-shared key cisco

  However, by default:

  Dynamics of LAN-to-LAN tunnels using the 'DefaultL2LGroup '.
  

  L2TP/IPsec connections use the 'DefaultRAGroup '.
  

  In order to see the pre shared key in clear text: "more system: run".

  You can have a single card dynamic encryption card crypto, but you can have multiple entries / map instances of this dynamic, for example:

  Crypto-map dynamic dynamic_map 10 the value transform-set ESP-AES-256-SHA
  

  Crypto-map dynamic dynamic_map 20 the value transform-set ESP-AES-192-SHA
  

  
  

  map outside_map 65535-isakmp ipsec crypto dynamic dynamic_map

  More info:

  Dynamic IPsec Tunnel between a statically addressed ASA and dynamically addressed Cisco IOS router that uses the example of Configuration of CCP

  ASA/PIX: Allow the tunneling split for the VPN Clients on the example of Configuration of ASA

  
  

  Let me know if you have any other questions.

  Portu.

• ASA 5520: SSL VPN by using a different IP address that the ASA public IP address

  Hi guys,.

  I'm trying to configure an SSL VPN on a Cisco ASA5520.

  Unfortunately port 443 interface OUTSIDE of the SAA is already used by Microsoft Outlook Web Access and I can not change the configuration of Outlook. This configuration already in place allows me to use the public IP address of the ASA as IP Cisco VPN for the Web page.

  I don't not want to use a different port so to keep life easy for users.

  I have a few available public IPs that I can use so I wanted to use one of them instead of the OUTSIDE of the ASA interface. Any idea how I could do?

  Thank you

  Dario

  Unfortunately you can not use any other public ip address, except the ASA outside IP interface to complete the SSL VPN.

  The only options that you have is to change the Outlook to use another port or the SSL VPN to use a different port.

• iMac screen plunges into the black when using Safari

  When you use Safari on my end 2014 27 "iMac, the screen will often randomly, fade to black.  Pressing the space bar will revive it, but it will sometimes immediately repeat the same thing.  When he exhibit this behavior, the Console message is:

  8:50:52.295 AM WindowServer [185]: device_generate_lock_screen_screenshot: authw 0x0 (0) [inf, inf, 0, 0] shield 0x7f9be085d600 (2001), dev [2048,1152]

  It's the second machine that to happen, the first was a late 2009 27 "iMac.  He can't get on my laptop. The system is:

  iMac (retina 5K, 27 inches, end of 2014)

  3.5 GHz Intel Core i5

  32 GB 1600 MHz DDR3

  AMD Radeon R9 M290X 2048 MB

  Any help you can offer with this deeply frustrating problem is appreciated gratefully.

  Hello captainlarrydart,

  Thank you for using communities of Apple Support.

  If I understand your message that your Mac is apparently going to sleep on his own, sometimes immediately after waking up.  To help solve this problem, please follow the steps below.

  If your Mac goes to sleep in an unexpected way

  Make sure that this energy saver is set up as you wish: choose the Apple menu > System Preferences, and then click energy saver. Adjust one or more of the following affect when controls your Mac goes to sleep. Some of these controls are not available on your Mac model.

  • Cursor 'turn off display after.
  • Cursor "display sleep".
  • Slider 'the computer sleep.
    If a slider is set to 'Never', sleep is disabled for this feature.
  • Schedule button

  Make sure you that you do not put your Mac to sleep accidentally:

  • Pressing on the button / stop can put your Mac to sleep.
  • Move your mouse pointer into a hot corner can put your Mac to sleep, depending on your settings from Mission control. Choose the Apple menu > System Preferences, and then click Mission control. Click on the button active corners, then see if any of the corners are set to "Display Put sleep."
  • Using magnets near your Mac laptop can put your Mac to sleep.

  If the previous steps do not work

  These additional steps can help identify or resolve the problem:

  • Reset the SMC.
  • Reset the NVRAM.
  • Disconnect external devices other than your Apple keyboard, mouse, and screen. If that solves the problem, gradually reconnect your devices, testing each time until you find the device that interferes with sleep. And then check the documentation that came with the device or contact the manufacturer of the device.
  • Start in Safe Mode to see if the problem is related to startup items not Apple, login items or kernel extensions.
  • Try to isolate the problem by using a different user account.

  If your Mac does not sleep or wake up when expected

  Have a good.

• What are the different ports used by BTA?

  Having recently had 'fun' to getting a load agent working in our secure local network, I was wondering if someone could clarify what are the different ports to/from?
  
  I am aware of the following:
  
  9001 actually mentioned when you configure a load agent
  1099 mentioned when you configure a data collector
  1098 -? necessary for the agent to load (I would hazard a guess to this also being the collector of linked data)
  4444 -? necessary for the agent to load
  7071 -? necessary for the agent to load
  
  I had also the following ports was told by looking at similar issues (but they didn't need opening in my recent exercise):
  
  7073
  8083
  8088
  
  I also suggested that information added to the knowledge base article (Doc - ID: 787226.1) because they may need to open on the firewall.

  Ian

  Oracle.port.RMI = 4444
  Oracle.port.http = 8088
  Oracle.port.empstart = 9001
  Oracle.port.uil2 = 7071
  oracle.port.dataCollector = 7073
  Oracle.port.WebService = 8083
  Oracle.port.JNDI.rmi = 1098
  Oracle.port.JNDI = 1099
  Oracle.port.HTTPS = 8433

  You can change the ports

  - \EmpAppServer\server\default\conf\oracle.propertie

  The following ports are used between load tests of Oracle for Server Web Applications and the Machine of the Agent itself:

  * 9001 (the agent communication port)
  * 1099 (Datacollector Comunication Port)
  * 8088 (for running scripts OpenScript)

  Concerning

  Alex

• VPN client and ssh to the external interface of the ASA

  Hello world

  I was testing clientless ssl in my lab at home.

  When you're connected via vpn without customer, I am able to ssh ASA outside interface, but when I use ssl vpn only I can't ssh to the external interface of the ASA.

  Need to figure out how I can ssh to the external interface of the ASA using clientless ssl vpn?

  Concerning

  MAhesh

  Mahesh,

  When you are on clientless SSL VPN to your customer is not limited routes of the Internet, isn't being NATted etc. If ASA is set to allow ssh from outside, then the VPN SSL without client user is no different from any other.

  A the user SSL VPN full tunnel can have any or all of these factors at play. One of them can cause the impossibility to access the ASA outside interface via ssh. I see the configuration to tell you which one (or more) is to blame.

• E3000 resets occasionally wired port when connecting to the VPN PPTP using Windows 7.

  I've had an E3000 for a few months now and a couple of times per week that the router loses wired Ethernet connectivity while PPTP VPN connects via Windows 7. The router does not actually resets itself... but darkens light of wired connection, the computer establishing VPN, and connectivity to the router is lost. Within 30 to 45 seconds, the port becomes active, once more, and to establish the VPN connection. I've not seen this on a wireless connection, but I do not often, which may be why. Similarly, I have not seen this on my Vista or XP wired computers using the Windows VPN client... but then again I can't use them often enough to meet the problem.

  I see this mostly on my Windows 7 (x 64) SP1, it also appeared pre - SP1, development equipped PC IP6 disabled on the PPTP VPN. And I don't see that on the establishment of a connection... once the connection has been made I can be operational for hours (5/6 or more a day) with no issue.

  While this issue causes me all real headaches like this doesn't happen on the connection... I thought someone should know.

  abandoned,

  Gave to your suggestion to try, but did nothing to eliminate the problem. The router was already on the version the most recent but re-flashed in any case. I ran 3 days on an old Windows XP machine connected to a different port on the router, I had 3 days to do work, and I've never had the drop on the VPN port. But this morning back on my Windows 7 machine... the port fell during my first attempt... I then had no problem, the rest of the day. Despite her disconnect and reconnect a PPTP VPN a few times more. Go figure.

  Let's consider this resolved... as I don't want to lose too much everyones time hassling with something that seems to be minor. Thanks for the help!

• I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I have challenged their load m

  I have a chase bank credit card that I have good ranking and what number do I call to talk to I tunes because he says, use a different card, it's the map I was buy everything what I tunes. Is it because I thought them charge me twi

  Can I have it please the number on I tunes support whether please or have them call me at * Leonardo B *.

  < personal information under the direction of the host >

• How to force the screen sharing to use Ethernet 2 port?

  Hello

  I have 3 MacPros connected in my studio. MP1 is the master and I use screen apart to see MP2 and MP3. Now, I bought a very quick switch to connect these 3 between them via the Ethernet Port 2 MP1 and at the same time have the MP1 connected to the internet and printers, servers and so on with 1 Port Ethernet. But this is not possible, because the screen sharing will prefer to use the port where the internet/router is connected.

  When ONLY Ethernet Port 2 is active, screen sharing using this port and it works perfectly, but when turn on again once, 1 Port Ethernet 2 remote Mac loses connection.

  Is there a way to force the screen sharing to use Port Ethernet 2?

  It would be useful:

  NC-port-number-on-Mac-OS-x http://superuser.com/questions/148095/How-to-change-the-default-Screen-Sharing-v

• I want to change the location of Firefox 3.6.8 profiles so that the same profile can be used by different Win XP user accounts.

  I changed the storage location of the profiles for versions of Firefox prior to version 3.6.8 on other computers by changing profiles.ini to point to the modified location, using the same file successfully profiles.ini for different user accounts. When I upgraded to 3.6.8 on this machine dual-booting Win Xp and Win 7, modified profiles storage location has been maintained so that all users in the two operating systems use the same profile (and the same version of Firefox). I tried to use what I think, it's the same procedure in another Win XP machine, but when I try to open Firefox 3.6.8 installed on this computer, I get a message saying that Firefox is already running and I have to close to go forward.

  Please explain how I can get this to work.

  Thank you.

  You define the location of the profile profiles.ini file for XP and Windows 7 point to that same folder.
  
  Easier to accomplish this is to create a new profile and choose the location of this profile to point to the profile folder.
  
  Make sure you have write access in the two BONES in the profile folder.

  See http://kb.mozillazine.org/Recovering_a_missing_profile

• How to use my screen LCD of Qosmio F30 for play on the Playstation 2 using video and the port?

  I plugged my Playstation 2 to my laptop using the plug-in software component video port on the right side of my computer. Everything is in place, but how to move the LCD screen to display Playstation 2? Please instruct me. Thank you.

  Hey Buddy,

  Have you looked into the graphic properties of windows? These properties should be options that usually is activating your software component video plug-in, so you can use your PS2 with your laptop.

  And before I forget: you must use a program that is grabbing the video input and display it on your desktop as intervideo windvr or something similar, check if you have this program.

  Welcome them

• text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.

  Text messages sent with an email address from a touch ipod duplicated on a second ipod touch using a different email address, but the two ipods are controlled by a parent with the same apple ID and password.  This has happened recently.  My two girls have used their respective ipods and texting, without their messages of duplication for each of the other ipods for more than a year.  Somehow recently, both addresses seem to be synced with them or something, so that both see each and other messages.  I've recently updated two ipods, iTunes on my computer--not the cloud and added music for two ipods, but has not changed anything by email email settings or message I know.  Help, please!

  Welcome to the Apple community.

  I can't fully follow how you have everything set up, but a glance at the settings > messages > send & receive

• using a different material of the same type

  Hello

  I wrote a code in LabVIEW and data acquisition that I pointed out where the signal will be sent to the and where it will make the acquisition of. I use USB6009.

  It turns out that when you use a different USB6009 the program will not work because it has a few other serial numbers. I need to configure the program for EACH DEVICE no matter if the appliance is of the same type?

  How about exe? Suppose I want to send a package to someone away who has same device type but of course physically different?

  (this is a basic type question but I'm always hard to find answers to my questions generally find manuals and materials to get a good point of departure-> a novice can really get lost)

  
  

• I use a simple low-pass, but the output of the filter outputs at a different frequency, even if the input frequency is the bandwidth

  I'm simulating a sine wave at approximately 1000 Hz (I'm variable according to the frequency with a slider), I would like to pass this signal by a lowpass filter (butterworth) with a high frequency of 2200 Hz cuttoff and a low pass to 2900 Hz frequency. However, the output after the filter frequency seems to be lower in the order of a thousand. the output frequency is about 0.1 Hz.

  

  Y at - it someone who can guide me please to solve this problem, I tried different filters and I'm still having this problem, it would be incorrect sampling?

  I enclose the block diagram and the front panel

  Because you use express screws and the type of dynamic data...

  You convert the signal of DDT (which contains the clock information) in a table DBL to perform filtering. Take it a DBL array (which contains no data of timing) and converted it into a DDT (which now contains no data timing). That's why when you try to view and analyze it you have lost all the data timing (frequency).

  If you were to exit table DBL of your filter and build a wave form and provide the dt to the waveform of the sampling frequency control, then it will work.

  Better yet, ditch the DDT and use waveforms from the beginning