The audio jack problem

Similar Questions

• Why my laptop built inn speaker always works, even I put the audio jack on it?

  I often use amplifier when you play music or watch movies for an excellent sound quality and sound effects available on my lappy would be much appreciated when it is used on the speakers... ut now when I put audio jack on my lappy notification "I YOU JUST PLUGGED A DEVICE IN THE AUDIO Jack" does not make out like it usually did after that I took audio jack on it.. ' " and the result was... from two portable and amplified sound announcement pregnant... it bass was gone... looks like a 'speakers canned.

  Hello

  1. have you made changes on the computer before this problem?
  2. which version of the Windows operating system is installed on your computer?
  3. are you an error message or error code?
  
  I suggest you to consult the following Microsoft article and check if it helps.
  
  Tips for solving common audio problems: http://windows.microsoft.com/is-IS/windows7/Tips-for-fixing-common-sound-problems

• Sign of the audio jack keeps flashing the message-"you just unplugged a device into the audio jack.

  Original title: sign of the audio jack continues to Flash on the bottom of the window

  sign you just pulled a device in the audio jack that he flashes at the bottom of the details screen and won't let me turn off

  Hello

   
  1. What is the brand and model of the computer?
  2. only the message all the time or it is displayed when you perform a specific task?
  3. do you have a speaker connected as audio device?
  4. have you done any software or hardware changes to your computer recently?
   
  Method 1:
   
  You can unplug and then restart the computer and connect back speakers. Check to see if the problem resolves.
  Check if the device gets detected if plugged into the same outlet.
   
  Method 2:
   
  Run the fixit from following link.
   
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us
   
  Check if it helps.
   
  View more information on the issue so that we can guide you better.
   

• I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

  I have a MacBook Pro (mid-2012) with the audio jack single. Why not recognize it when I plug a microphone inside?

  I use a splitter cable, and have verified meter that it is properly connected.  Also the microphone that I try to use the works when connected to a separate Recorder device, so I know who works very well.

  The audio output on a 2012 port does not support the audio input.  You will need to use the USB ports for audio input.  This will require an appropriate hardware and software.

  Ciao.

• HP Pavilion e049wm 17: 17-e049wm (HP pavilion 17) can I replace the audio jack on the motherboard?

  Hello

  Nearly two years ago, I bought the laptop and the audio jack stopped working. I opened the laptop and saw that indeed broken taking!

  

  I wonder where I can get a new, so maybe I can solder on the motherboard?

  There is no place to buy this decision in a separate part. The only possibility is to find a motherboard nonworking parts on ebay and to transplant the good audio jack on your motherboard, and I don't want to minimize welding skills that will. You'd be very likely to damage the motherboard still more. Your best bet now if you want to use the laptop with a gaming headset is to get a cheap usb sound card and plug it in when you want to listen in private. I guess that the speakers of the laptop still work OK?

  Like this:

  http://www.Amazon.com/virtual-5-1-surround-external-sound-card/DP/B000N35A0Y/ref=sr_1_5?ie=UTF8&QID=1457963711&SR=8-5&keywords=USB+sound+card

  You could buy half a dozen of them, then you might lose a bit and still be OK.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Sound recording play error message: disconnected from the audio jack and opens the Realtek HD audio Manager.

  Original title: his record game

  Recently, I built a new computer and its been connected via HDMI. Then one day that sounds simply stopped working, so I've updated my drivers that are digitally signed and still no idea. It is said that I unplugged the audio jack, and it evokes the strange Realtek HD audio Manager every time.

  The operating system is Windows 7 64 bit home edition. Does anyone know what I need to do to correct this little hiccup?

  Thanks for the help,

  Mac ~.

  IS TT 3TT)<>

  Hey Mac,

  You can try the following steps and check what is happening.

  Method 1:

  You can try to disconnect and reconnect the connection and check.

  Method 2:

  You can also try uninstalling and reinstalling the latest version of the sound card driver.

  Step 1:

  Uninstall the audio drivers from programs and features

  a. click on start

  b. type appwiz.cpl in the start search

  c. search for all packages to audio driver, right click and uninstall.

  Step 2:

  Uninstall the drivers from Device Manager.

  a. click on start

  b. type devmgmt.msc in search, and then press enter

  c. in find Manager device for the device, right-click on it and select the option uninstall

  d. restart the computer and check.

  You can also consult the manufacturer of the computer or the device manufacturer's Web site and install the latest version of the audio drivers.

  Updated a hardware driver that is not working properly

  Hope this information is useful.

• HP m7160n the front audio jack problem

  I am running Vista Home on my PC Media Center m7160n.  I used to be able to plug my headphones into the front audio jack and it would reduce the rear speaker output.  Now it doesn't!  I entered the sound properties and is set to turn off the rear socket, when the system detects a card into the front socket.  The helmet still works, but I need the speakers off when using the headset.  I hope this is enough information.

  Hi MrBassMan26,

  It's weird and looks like the jack-detect is not working properly. This problem just started happening? It happened after installing anything, even a Windows Update?

  If it just started happening, you can try to perform a restore of windows to an earlier point when it was operating normally. Or you could try to re - install the driver audio or even install a updated audio driver. Who should take care of it, and if not you may need to make some configuration changes in one of the sound properties (Windows or Realtek).

  I see that you have Vista, you accidentally upgraded to Vista XP?

  Try to install audio driver for Vista from Realtek: http://www.realtek.com.tw/downloads/downloadsCheck.aspx?Langid=1 & PNid = 24 & PFid = 24 & Level = 4 & Conn = 3 & DownTypeID = 3 & GetDown = false

  Let us know how it goes.

• Tecra 9000 running W2k - driver for the Audio controller problem!

  Help, please!

  I have a laptop Toshiba Tecra 9000 and recently discovered that the sound was no longer working. I'm not sure exactly when he first stopped working, but believe it was with MS Windows 2000 Updates or when cleaning PC after spyware attacks. While they inspected the real device (Yamaha AC - XG Audio Device), it has each if useful ""! "with a ' Code 10 - device cannot start", in the "Device status" screen
  I removed the device and allowed windows to detect & install, without success, then downloaded and tried many devices and generic drivers, drivers and
  even later as suggested on a Web of Toshiba site, I find
  http://EU.computers.Toshiba-Europe.com namely;

  Driver date: 22/05/2001 Version: 5.12.1.2138

  I'm at a complete loss as to why it has stopped working and what to try next to try and solve the problem. Any
  help or advice would be greatly appreciated.

  Concerning
  K

  Hello

  It is possible only after the installation of the MS Updates that the audio driver is blocked by a load of your system and no sound can be heard.

  If you want you can try to install this driver:
  http://drivers.Soft32.com/driver/download-Yamaha_AC_XG_Generic_Drivers_for_YMF753_743_752-24609.html

  It is useful after installing SP2. I don't know if this will help in your case, but you can try it.

  Good bye

• Speaker/headphone/audio jack problem

  I recently had a problem with my headphones. The computer recognizes that I plugged but continues to use the external speakers and there is no noise coming through the headphones. I tried more than a pair of headphones and it still does not work. Computer restart worked once, but not anymore.

  Dear customer

  Welcome to lenovo forums

  You just need to reinstall the audio driver and install it once more, so please provide us with your machine model and the type of windows

  Please let me know

  Thank you

  Alaa

• On the audio recording problems

  Hi all

  I have a problem with regard to save audio files in Labview.

  In my program, I acquire the audio signals of the soundcard of the PC constantly and save them in a queue. After that certain prerequisites are activated, these audio signals in the queue is stored in a .wav file. This program works well, except a problem, which is the time lag in this .wav file. For example, I save a sound segment for about 30 seconds, but after the backup, this .wav file is just 21 long s. It contains all of the original recorded segment, but the time axis is compressed, which sounds like played fast. I searched all day and could not find any information about it.

  These sounds record and save functions are part of a comprehensive program, and I'm sorry that I can't give a single vi on it. I add the numbers below and I hope it helps. I am also willing to provide any additional information.

  PS: I have reviewed the incompatibility caused by approximation of the "t0" (published in http://forums.ni.com/t5/LabVIEW/Time-mismatch-with-Sound-Input-Read-VI/td-p/1385404 ) and compensate for that during the savings phase. (see figure 2)

  Thank you very much for the help!

  

  

  Hi, Vans,

  Thank you for your response.

  For your questions.

  1. I'm using Labview 2011 sp1 on Windows 7/Xp. I tested the program on desktop computers and laptops. I don't know about the types of sound card, but given that this problem occurs on several different computers, I think that this is not the problem of sound cards.

  2. for the sound card sampling frequency, in fact I checked that. I read signals of waveform of the 'read.vi of sound entry' and the term 'dt' is equal to 1 on the sampling frequency. So I think that the sampling rate of the sound card is correct.

  In fact I have just solved this problem by myself, but the solution is pretty weird. I think there are two reasons that caused this problem.

  1. when I receive tones of "read.vi of sound input", I first save them in a queue. Once the acquisition is completed, I save all the signals in the queue to a .wav file. But I'm going to do to overcome the overlapping sound and the gap caused by the "t0" reconciliation, a waveform signal re - organize before saving it, as below. According to my knowledge, I think that this 'dt' in the resulting waveform (indicated by the arrow) must be the same as before, but in fact it is not, and it becomes 1.

  

  2. Thus, to solve the first problem, I manually change the term "dt" once again as below. After the change, I'm sure that the "dt" is back to the correct value. But then is the strange thing is I saved the same signal waveform in two different ways, using "his write.vi file" and "file its writing simple.vi" respectively. The first method is the one I have used before and it caused the problem I posted here. The second works. In my program, I put as 16 kHz, 16 bits/sample, and 1-channel sampling rate. The file .wav from the first method has a strange flow 705 bps and the wave from the second method file has the right bitrate which is 256 bits/s.

  

  I tested the program of hundreds of times and each time he acted like I described above. I don't know if anyone has ever faced the same problem as me, but I hope that my solution can be useful for others. And I also hope to be useful to improve your LabView products.

  Thank you for your time.

  Best regards

  Sun87

• Is it possible to use the audio jack as input?

  I was wondering if any of you know if it is possible to use the audio input jack on the BB10 devices as input source?

  Yes, it is, in fact, that BlackBerry has blogged about it!

  http://devBlog.BlackBerry.com/2013/07/beep-Beeep-beeeeeeep-and-spandex/

  and there code ready for you (from the blog article) on Github!

  https://github.com/BlackBerry/Cascades-community-samples/tree/master/AudioAccessory

• Audio Jack problems

  Hello

  I just bought my new laptop (Quad HP Envy 17 t-j100 edition) and I have a few questions for my audio port.

  I have only 1 taken from headphone-out/microphone-in the drop-down list. Is it possible to record stereo signals using this port? When I go to the recording devices tab is displayed: "Table of internal Microphone", "Helmet Mic" and "Stereo Mix". What is the 'Stereo Mix'? How can I use it?

  Please help me.

  Hey Norbi93,

  Welcome to the HP Forums!

  I understand that you have questions about the audio ports on your laptop and the stereo mix option in your audio properties.

  Stereo Mix supports computer reading record. For example, using a program like Audactiy you can record audio from a YouTube video. The selection of properties simply displays the unit is on and available. In addition to customizing options of quality, there is no much to do in this area.

  If you want to know how to record sounds, you need a sound recording software. I can't tell you what software is best for you, then I would say using Google looking for a sound recording software that will work for what you are trying to do. Once you have found and installed, this program support team would be better equipped to answer questions on how to actually record the sound.

  I hope that answers your questions!

• Reference Dell place 8 7840 headphone / Audio Jack problem

  My place 7840 arrived last week and I really like this thing. Today, I finally plugged headphones into the phone 1/8 "plug and immediately heard a rehearsal 'click' sound, strong enough and not affected by volume or muting. Quickly, I rebooted the Tablet, then tried again in Airplane Mode. The same problem. Checked my sound settings. Everything was normal (Bluetooth audio works fine). Tried another set of headphones - same problem.

  Everyone fell on this? My helmet is defective?

  Thanks in advance.

  UPDATE! I found the problem. Problem solved.

  I use the Dell Folio, which came in the form of a Pack, and he made sure the headphones were enough to play sounds and 'feel' as it has been connected - connection but it wasn't quite the case. Making felt a little loose, so I gave the helmet a good shot and he well engaged. No more rattling! I am back to enjoy my place of 8.

  Hope this helps someone else.

• Disable the audio jack in windows 7

  I've Dell Inspiron 15R using conexant Audio Smart. Broke my helmet PIN inside the socket and despite all my efforts is not out. I don't have much time to give to repair today thinking of a workaround so that I can use the speakers for now. Can anyone help?

  HI, thank you all for the reply. I solved the problem with a bit of luck! In fact, my problem was that my helmet not included in playback devices, so I couldn't turn it off and use the built-in speakers. I tried to make some changes in the regedit too as he gave on a few forums as a solution. So finally, just to check, I uninstalled the drivers. On re - install, I can see the helmet on the playback devices and now I ve disabled builtin speakers and headphones work well :)

• iPhone 7 lightning to the questions of the audio input jack

  I often connect my phone to listen to music on stereo systems for listening to music out loud. When I used to do with my 6s, I had no problem with the sound output. Since switching to the iPhone 7 that I need to use the adapter to play music, but when I do this the sound is very distorted and sometimes if you put the volume a bit higher up the music stops. Even with a lower volume, it is still quite distorted. When I use a headset with the adapter and plug the phone into my car is fine no problem and sounds. It is only when I play music on the radio.

  I talked to Apple support and they were not really able to diagnose the problem or give me a solution.

  I was wondering if anyone else has problems with the lightning to the audio jack connector or something similar? and everyone is aware of any other superior quality adapters, you can buy or if there is a fix by apple to do deal with this?

  I don't have the problems you describe at all.

  To the extent where a 'solution' by Apple, not sure there is any 'broken' to fix.  Anyway, we are users here on this forum, we would have no idea what Apple would do.  Speculation is prohibited by the terms of use of this forum.

  Best,

  GDG