the call to dyanamic events for Boolean control with mechanical lock action.

Similar Questions

• With the help of digital input for Boolean control?

  Hello!

  I have spent a lot of time to search but have not found a solution to this...

  I have LV 2015 with chassis NI 9188 and module NI 9425 DI.  Try to use the input signal to assign a State structure machine program and/or events in real time.  It would be acceptable to have an indicator show the status of the input line, since I can use it elsewhere with Value (Signaling).

  Please do not ask for the code - the problem is quite simple.  I just want to use the digital inputs to program control as a T/F.  I want just the program to analyze the State of the input and decisions - a bit like a PLC.

  All I seem to be able to extract is data of digital waveforms with a task DAQmx.

  It's not a trigger - I already use a trigger to start the analog acquisition.

  Formulate the problem in a simpler way...  What to do if you had a digital input module and you wanted to see the status of each input line in the form of a LED on your face in real time.  How would you do it?

  I really appreciate the help!

  greyhorn23 wrote:

  Formulate the problem in a simpler way...  What to do if you had a digital input module and you wanted to see the status of each input line in the form of a LED on your face in real time.  How would you do it?

  I would like to write what has been read to the Terminal.

  From what I can tell, you want to just read a single static value from your digital line.  You can then simply read the value of one and do some logic with her.

• Mechanical locking action does not not for boolean within a cluster table

  I am currently on LabVIEW 2012.0f1 and I noticed that if you were to create a typedef of cluster that has a Boolean control with the mechanical action of the latch and then put the said cluster within a table, the Boolean value will act as a switch instead of a lock if read in a loop or an event structure.   Is this a bug or an expected behavior?  Whatever the answer, how can I get my desired action of a latch behavior?

  Thank you

  I don't think it's a bug.  It is consistent with a table.  If you put a button inside a table, you cannot set its mechanical action more.

  

• After you download CC Office at the beginning of the installation, I get the error 049. It was the 9th try to install for 1 week - with and without administrative rights.

  After you download CC Office at the beginning of the installation, I get the error 049. It was the 9th try to install for 1 week - with and without administrative rights.

  Hello

  Please see error download or update Adobe Creative Cloud applications

  Hope that helps!

  Kind regards

  Sheena

• by using a structure of the event to restore a Boolean control with change in value for the menu ring

  I'm trying to get two Boolean buttons to reset when the value of a ring menu.  For this I use a structure of event defined to execute with a ring value change.  However I have another code that should be run while the structure of the event expected to change value.  I place my structure of the event inside the while loop buttons reset as expected but my other code is not run (except when the value of change). If I place it outside the loop the rest of functions code as expected, but the buttons do not reset.  Any help you offer is much appreciated.

  Hello

  ADD TIME OUT EVEN AND GIVE DELAY OF 100 MS.

  Adds the case-application-timeout event

• LabVIEW 2012 has radio for Boolean control button by default

  Using LabVIEW 2012 SP1 at a customer.  Whenever I create a Boolean control or indicator by right-clicking and selecting 'create', the annoying option button appears...  Yes... one in the picture below.  All I want is one of the lights (round or rectangular).

  I know it takes a ridiculous affecting somewhere.  To save time, but especially of frustration, where hell can I change this setting?  I already looked at the Option settings but don't see anything.

  That's what I get:

  

  This is the system default boolean for a reason any crazy.  I learned to curse under my breath and find the prices for the use of system controls.

  Edit: change the style by default to say, modern or classic and it won't happen.  Unless you use the classes so what control you get when you create controls/indicators is a boring montage.

• The use of contextual events for < af:commandToolbarButton... >

  Hi all
  
  I use 11.1.1.7.0 jdev and I cannot upgrade to a newer version.
  
  I need to trigger an event in a region and perform actions according to him in the other. I want to use the ContextualEvent feature as has been described in here . Everything seems clear, but I stuck in how to declare the popup event.
  
  I have a < af:commandToolbarButton... > element to produce the contextual event, I can't change it to something else. "af:commandToolbarButton" isn't Behaivor - ContextualEvents inside-tab to declare a contextual event. Maybe I need to specify it in the other way, for example using an actionListener = "#{viewScope.BeanName.callToEventProducer}" and perform programmatically attempt to contextual event mounted? "
  
  
  in my code I have:
  

  <af:commandToolbarButton ... actionListener="#{BBean.commandUndoRedo}"/>

  and in the code of bean:
  

      public void commandUndoRedo(ActionEvent actionEvent) {
          BindingContainer bindings = BindingContext.getCurrent().getCurrentBindingsEntry();
          JUEventBinding eventBinding = (JUEventBinding) bindings.get("undoRedoEvent");
          ActionListener al = (ActionListener)eventBinding.getListener();
          al.processAction(actionEvent);
      }

  and in taskFlow page def:
  

    <bindings>
      <eventBinding Listener="javax.faces.event.ValueChangeListener" id="undoRedoEvent">
        <events xmlns="http://xmlns.oracle.com/adfm/contextualEvent">
          <event name="undoRedoPublisherEvent"  eventType="Action Event"/>
        </events>
      </eventBinding>
    </bindings>

  and when I try to find this event in any other workflow in pageDef - links - ContextualEvents - subscribers-
  
  I don't see any "undoRedoEvent" or "undoRedoPublisherEvent".
  
  I do well?
  
  Thank you.

  Hello

  You can create A producer events

  And inside the Manager of consumer, you can get a handful of beans of region C (if it is different from A) and update only this part.

  for example.
  This would be your method of consumer (class to create + Create + Add data as the Action method on jsff control)

      public void handleRefresh(Object payLoad){
               FacesContext fctx = FacesContext.getCurrentInstance();
  
          ELContext elctx = fctx.getELContext();
          ValueExpression valExpr =
              fctx.getApplication().getExpressionFactory().createValueExpression(elctx,
                                                                                 "#{backingBeanScope.backing_}",
                                                                                 YourBeanName.class);
          YourBeanName bean = (YourBeanName)valExpr.getValue(elctx);
          bean.refreshT1();
  
      }
  

  You can check
  http://www.jobinesh.com/2010/11/triggering-navigation-from-contextual.html
  http://www.jobinesh.com/2009/07/programmatically-publishing-contextual.html

  Thank you
  JIT

• Generating a lot of events for access control

  I want to raise events when the value of the adjustment wheel increases to say 10, 20,30 so now. But I can only have one event per control. Is it possible to do this

  Kind regards

  Austin

  Austin,

  If I interpret your request correctly, I think your best bet is simply to use the event has changed value, and then use a structure of the case to determine what value the dial has changed.

  Something like this:

  

  I hope this helps.

  Kind regards

  Simon

• Download the invalid software from OTN for Grid Control 11g on Linux x86_64

  Hello
  
  I want to test Oracle Grid Control 11g, but among the files zip is invalid. This is the name of the file:
  
  GridControl_11.1.0.1.0_Linux_x86 - 64_2of3.zip
  
  Decompression gives an error and also checksum is not the same as it appears on the OTN download site. Installation of Grid Control 11 g translates into I/O-error. Could you please fix the download file?
  
  Thanks in advance!
  
  Greetings
  Benni Gampert

  Hi Benni,

  Try to download the same software of Oracle e-Delivery Web site - http://edelivery.oracle.com/

  Thank you
  Hussein

• The call of a function in a SWF with an external program TLFTextField

  I have a program that loads another swf B, and after B, a will call a function of B.  He used to work when B creates a TextField and TextFormat is using, but when I changed to create a TLFTextField, I got this error:

  Reference error: #1069 Error: loadCurrentPictureFromMenu property not found on ECard__Preloader__ and there is no default value.

  to ECard / swfLoadCompleteEventHandler ()...

  And also

  WARNING: Ignorance of the attribute 'trust' in the http://fpdownload.adobe.com/pub/swz/crossdomain.xmlpolicy file.  The secure attribute is allowed only in HTTPS policy files and taken...

  So I wrote these 2 programs to test this:

  ----------------------- Test B -------------------------

  Import fl.text.TLFTextField;

  Import flashx.textLayout.formats.TextLayoutFormat;

  Import flashx.textLayout.elements.TextFlow;

  var myFormat:TextLayoutFormat = new TextLayoutFormat();

  myFormat.fontFamily = "Kids."

  myFormat.fontSize = 24;

  var tlfTextField:TLFTextField = new TLFTextField();

  tlfTextField.x = 50;

  tlfTextField.y = 50;

  addChild (tlfTextField);

  var myTextFlow:TextFlow = tlfTextField.textFlow;

  myTextFlow.hostFormat = myFormat;

  myTextFlow.flowComposer.updateAllControllers ();

  tlfTextField.text = "test this."

  function changeText(string:String):void

  {

  tlfTextField.text = string;

  }

  ---------------------- Test A -----------------------------------

  import flash.net.URLRequest;

  import flash.display.Loader;

  import flash.display.MovieClip;

  var urlRequest:URLRequest = new URLRequest ("testTLFTextField.swf");

  var loader: Loader = new Loader();

  Loader.Load (urlRequest);

  loader.contentLoaderInfo.addEventListener (Event.COMPLETE, loadingCompleteEventHandler);

  function loadingCompleteEventHandler(evt:Event):void

  {

  addChild (loader);

  loader.contentLoaderInfo.removeEventListener (Event.COMPLETE, loadingCompleteEventHandler);

  var mc:MovieClip = evt.currentTarget.content;

  mc.changeText ("we are here");

  }

  ---------------------------------------------------------

  I got the error #1069 again, but when I changed back to TextField TLFTextField, it works again.  Test one can now find the 'changeText()' function to test B.

  I use CS5.5.

  Any help is appreciated!

  Thanks in advance!

  This can also be due to bugs in the class Loader.

  If you're on CS5.5, use the class ProLoader .

• What is the best brand to use for CD/DVD with DVGW/HD TS-L802A ATA

  I tried Sony & Memorex CDR + / I can't get them to burn. Before I go out a buy one of each brand of CD there are their some brands that seem to work on this the best burner?
  I even don't have a DVD yet, but all the notes on those too?

  In the manual of the user who is installed on the laptop you you will find details on CD/DVD compatible and taken a charge.

  I prefer the TDKs. I use it for a long time and I m very happy.

• Error running on the SIMS 2 and need for Speed Carbon with WIN7 Ultimate 32 bit

  
  

  • Error running with the SIMS 2
  • The error that says: the DVD error running is not found
  • I tried to fix it: with XP SP3, VISTA SP2 compatibility mode (I installed the game and I want to play with the compatibility mode for XP with Vista, now I installed WIN7Ultimate 32bits and it doesn't work
  • I already downloaded the latest patch and still work does not correctly...
  With the CNSA, I have the same problem, it starts, but when loads of information to start playing, it opens a window saying the program cannot continue to run, restart the application and the ini.

  Hi fedelovrin,

  Do you have any error message during the installation of the game?
  Is that your DVD player plays all DVDs correctly?
  Could you give us the exact error message that you meet?
  Is the same error message on Need For Speed Carbon?
   
  Since this game is compatible with windows 7, it should work properly without compatibility mode.
  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/search.aspx?type=software&s=Sims%202
   
  Like you said you used the Windows XP on Windows Vista compatibility mode. Try to use under Windows 7 XP mode also and check.
  You can find more information on compatibility modes in the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/what-is-program-compatibility
  http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows
  http://Windows.Microsoft.com/en-us/Windows7/Program-Compatibility-Assistant-frequently-asked-questions
   
  Here is the link for the support of the SIMS 2:
  http://TheSims2.EA.com/help/index.php
   
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• In the notification area, has changed for Exchange 4 with no internet access and return to network 3 with access network 3 so far.

  When I start the computer and go to the Office to join I / E 10 on the notification area indicating the access to internet, the 3 network icon has been

  change to the 4 network with no access to the internet and to this day it has changed to network 3 with access after a short period.  I had some

  pages not being not able to view also. This happens not all the time well.

  Omer

  Hi, Omer,.

  You are using a wired or wireless network?

  This problem may occur if there is more than one wireless network set up on your computer.

  If you use a wireless network, I recommend you to uninstall and reinstall the wireless network and check if that helps.

  1. Click Start and select Control Panel.

  2. open the network and sharing Center.

  3. click on manage wireless networks.

  4 remove all wireless network listed in this list.

  5 restart the computer and you reconnect to your wireless network.

  Keep us updated on the status of the issue.

• Return the column in the dynamic table based on indicators of control with the help of EL

  10.1.3 JDEV
  ADFBC
  The ADF faces
  
  I'm looking for EL that exposes if suspicion of display of the attribute has the value "Hide".
  
  Inside a < af:table > tag I dynamically generate columns from the View object:
  
  < af:forEach elements = "#{bindings." MyView.attributeDefs}.
  var = 'def' >
  < af:column headerText = "#{bindings." MyView.labels [def.name]} ".
  sortable = "true" sortProperty = "#{def.name} '"
  rendering = "true" >
  < af:outputText value = "#{row [def.name]}" / >
  < / af:column >
  < / af:forEach >
  
  I want to hide a column if the display for the corresponding attribute flag is set to 'Hide '.
  
  I was not able to find the appropriate EL syntax to expose this property.
  
  Does anyone know a quick/easy EL expression to expose the display flag?
  
  Thanks in advance.

  Looks like it will work only in 11g.

  Here's what you can do in 10.1.3.4 I tested as working...

  Add a bean support like this helper class (I registered with the managed bean name 'Helper' in the scope.

  package extendsproject.view;
  import java.util.HashMap;
  import java.util.Map;
  import javax.faces.context.FacesContext;
  import oracle.adf.model.BindingContext;
  import oracle.adf.model.binding.DCBindingContainer;
  import oracle.jbo.AttributeDef;
  public class BackingBean {
    Map m = new HashMap() {
        public Object get(Object key) {
            if (key instanceof AttributeDef) {
                AttributeDef ad = (AttributeDef)key;
                DCBindingContainer bc = (DCBindingContainer)FacesContext.getCurrentInstance().getExternalContext().getRequestMap().get(BindingContext.RESERVED_BINDINGS);
                if (bc != null) {
                    return !"Hide".equals(ad.getUIHelper().getDisplayHint(bc.getLocaleContext()));
                }
            }
            return null;
        }
    };
    public Map getDisplayed() {
        return m;
    }
  }
  

  I have the reference in my dynamic page in the property 'made' column ike this:

• All the desktop icons are configurΘ for dΘmarrer with Internet Explorer

  original title: cannot open programs.

  Each program on my desktop has the same icon (Internet Explorer).  When I click on any of them, it opens "display and track your downloads" is the program I want on the page that opens, but I can't access this program.

  The only program I can access Internet Explorer, which works very well.

  If I'm going to start--> all programs, I noticed everything, but once again, they have all the knowledge icon.  And cannot be opened.

  How can I get the icons on the desktop to go back ot their original photo?

  Hello

  
  1. what operating system is installed on the computer?
  2. were there any changes (hardware or software) to the computer before the show?
   
  Run the FixIt and see if the problem is resolved.
  http://support.Microsoft.com/kb/950505
  http://support.Microsoft.com/mats/system_maintenance_for_windows/en-us
   
   
  Hope this information helps.