The Catalog backup of opening after the failure of the computer

Similar Questions

• I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I have problems to restart of Yosemite, after power failure during the new backup, and now HD is also blocked.

  I tried the holding of 'command-r' and 'option' to see if the problem can be resolved or try any boot from a boot disk, my old backup, USB function start - but after a slow long process it all just stops.

  There is software on my HD that I don't want to lose by simply reformatting the computer, because I am now in a different country, far from my house, which is another problem of the Apple Store, to reinstall my OS from Yosemite on the www.

  Hey AmnonMikeCohen,

  Thank you for being a part of the communities of Apple Support.

  I understand that your Mac is not start properly after the power went out.  Let's start with resetting the SMC and NVRAM on your Mac and see if he can start from there:

  Reset the management system (SCM) controller on your Mac.

  How to reset the NVRAM on your Mac.

  See you soon.

• Why don't I have easily select my questions open after the connection support?

  Why don't I have easily select my questions open after the connection support?

  When I connect support communities, I have still no clear idea where to find my support questions which remain open to check updates.

  Seems to me that this should be a great, distinct and separate button on the homepage of support after you have connected.  "My open issues Apple Community Support."

  Is this too much to ask?

  Steve

  1. Click / tap your username
  2. Click / tap 'manage subscriptions '.

  

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• After the upgrade to 10.0 today, came to 'reboot' action. Does not open after... continue to restart again and again restart.

  Tried to uninstall. When you click on 'delete' again invited to restart to the new version. Still, it wouldn't uninstall. X 2 the computer unplugged. STIL told to restart. Tried to restore the system to yesterday, but always 'reboot' happened every time. It cannot open Firefox. It appeared to download the upgrade normally until the restart action.

  Thank you! I was able to uninstall after downloading Firefox on my desktop. There are always a few files that I could not remove at the time, but they seem to have disappeared now.

• I deleted my phone after the backup of photos were also deleted from the computer and iCloud

  I have an iPhone 5 and after upgrading my phone and transfer pictures, my computer screen went to sleep while he was removing all transferred photos off my phone as I walked away. When I went back and opens the screen, deleting was stopped, and even if I tried to have the iPhoto to delete 517 photos that were transferred, it would not be. So, while my phone was still connected to the computer, I scored manually 88 photos on my phone, following on the computer, ensuring that each photo that I retreat the phone had been transferred to iPhoto. Then, I went in the "recently deleted" on my phone and deleted those as well, so they do not take place. When I got back to the computer for the next round, I realized every photo that I had just deleted my phone also disappeared from iPhoto! I even checked iCloud and they weren't there. How can I recover these 88 pictures I deleted from my phone and why the hell did remove it from the computer?

  Any help would be appreciated. Thank you!

  Note: My operating system is OS X El Capitan 10.11.3 / / iOS on my iphone version 9.2.1

  iPhoto or the new Photos application on your computer?

  Note that if you have settings > iCloud > iCloud library enabled in your phone and if you have the menu Apple > System Preferences > iCloud > Photos - Options > iCloud library enabled in your Mac, all the photos you delete phone, the Mac, or directly on iCloud will be removed from all 3 places. Intend to iCloud photo library must synchronize all your pictures on all your devices and iCloud. More information on iCloud Photo library FAQ - Apple Support

• gSynchit does not open after changing the password

  GSynchit has stopped working. I changed the password of email account, but the program does not open if I can change the settings.

  Hello

  1. what operating system do you use?

  2. What mail client do you use?

  3 did you receive an error message when you try to run gSychit

  If you use windows7, I suggest you follow the link and check.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• After upgrading Windows XP to Windows 7, how can I get the computer to open strictly to Windows 7 instead of choosing "Windows 7 or an earlier version on windows"?

  After the upgrade, I want the computer to open to strictly Windows 7.  I get a page asking if I want to Windows 7 or an earlier version.  There also all programs on the file for XP that I didn't need since the upgrade, I transferred all my documents, files, etc.: on my removable hard drive.  How I can do all this extra to elimintate bits of information and make it turn on the computer faster and more accurate?

  Upgrade to Win7 has nothing to do with the Windows Update feature. Please repost your question here: http://social.answers.microsoft.com/Forums/en-US/w7install/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Install the hpofficejet XP 4200 series-not Director hp get will open after installation

  I have tried to install it from the cd 5 x and once downloaded drivers and can not get the HPDirector opening after installation.

  Uninstalled propgram followed on the web directions. machine has recently been reformatted because of a windows error, previously worked on the same machine. Any suggestions?

  Hello

  Try to install the following hotfix:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=OJ-46104-1&cc=us&DLC=en&LC=en&OS=228&product=351125&sw_lang=

  Once completed the installation of updated, restart the PC and try openning the HP Director.

  Please let me know if this can help,

  Shlomi

• clean install of Vista on an old drive hard ide after drive failure hard sata - oem version now get "the limited functionality" due to "unauthorized changes" had no problems for 3 years until this!

  I did a clean install of vista on an old drive hard ide after the disk sata hard down - (oem version) now get "feature limited" because of the "unauthorized modification" had no problems for 3 years until this!

  Hello

  It's a shame you don't know the exact name of the virus

  Malware can cause non-genuine messages appear

  but try this:

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• After a failure of the internet, my desktop icons, screen saver and home page (canoe.ca) were lost when the internet was restored. How can I get back them?

  try to restore information lost after the failure of the internet

  try to restore information lost after the failure of the internet

  Hey buceriasbev

  try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  and read this too

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-Internet-Explorer-home-page

  Walter, the time zone traveller

• Windows 7 - after selecting a USER, the computer opens the selection screen of the USER - code throws again: 2000-0146 to diagnosis

  Computer seems to boot correctly.  Once a USER is selected in the USER SELECTION screen, the computer seems to proceed... but then the USER SELECTION screen opens again.  When you run the Diagnostic tests, the only error is 2000-0146

  Hello

  Thanks for posting your question on the Microsoft forums.

  I understand that you have a problem on your Windows 7 computer. I would certainly help with this question.

  This problem started after the recent update installation of Windows?

  Some members of our community have reported similar problems after the recent update of Windows KB3097877 installation on

  their Windows 7-based computer. The update has been re-released, uninstall and reinstall the update can help us get this problem is resolved.

  In order to solve the problem, I suggest you try the steps posted by Akil P responded on November 13, 2015 in the following thread and check if the steps help you to solve the problem.

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-update/flickering-screen-and-sign-in-problems-on-Windows/df9c8255-587f-4DBF-BB45-6639b29dc4ae?TM=1447375680761

  Hope this information is useful. Let us know if you need additional assistance, we will be happy to help you. ___

  _____________________

  Thank you best regards &,.

  Isha Soni

• I plugged my USB Modem to the computer, it's MMX352G micromax modem. After you connect to the internet, all browsers open the pages of the BM, but in the taskbar sign of the network is to have a red cross. Why?

  I plugged my USB Modem to the computer, it's MMX352G micromax modem. After the internet connection all browsers open the pages of the World Bank, but in the task bar sign network is to have a Red Cross and when I go over it, it says not connected, but I can always use internet in my browsers. Why? It causes an adverse effect on my computer.

  Hi Akash,

  Welcome to the Microsoft community. According to the description of the bar icon problem tasks of the network have a red x, but you can still access the internet. Provide the following information:

  ·         Did you do changes on the computer before the show?

  ·         You use a third-party security software?

  I suggest you follow these methods.

  Method 1: Follow these steps:

  Step 1: Start the computer in safe mode with network and check if the problem persists.

  Startup options (including safe mode)

  Step 2: If the problem does not persist in safe mode with networking, perform a clean boot to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  Note: After completing the steps in the clean boot troubleshooting, follow step 3 from the link to start the computer to a Normal startupmode.

  Method 2: Follow the steps in the article.

  Windows wireless and wired network connection problems

  You can read this article for more information:

  How can I troubleshoot network card?

  I hope this helps. Let us know if you need more assistance.

• After you rename the computer, the backup of the file history still showing the old name of the computer to its destination.

  Original title: history of Falie Worng Destination path

  I changed my computer name [my computer setting and the name, display name, computer and computer Description all equal under the same name]. But when the history of files backing up my files, he insists on putting the OLD computer name in the backup destination path, for example:

  Backup_Drive\\Backup_Folder_A\UserID\Old_Computer_Name\Data...

  I tried selecting a new backup drive and reboot several times, but the history of files always comes back to the old name of the computer when you create the destination path.

  How can I fix?

  Similar to the response of Siva here, you will want to return to

  C:\Users\\AppData\Local\Microsoft\Windows\FileHistory

  Now, if FileHistory was lit before, using the old username, there will be a configuration file and the Config1.xml and Config2.xml files will contain several tags using the old name of PC. Rather than wipe these files, open each file in Notepad and search for the name of your old PC and replace with the name of the new, do not forget to save.

  In addition, if you want to keep a backup that has already been created with the old name of PC, you'll need to find, rename the main folder ("old name PC") and in this folder, rename tags in the Web configuration files (as you did in the local configuration files).

  When I tried to delete my local config files, he would recreate using files of configuration of the backup, that were also incorrect, so I just manually renamed and mine works fine now under the new name of PC.

• I have improved my 5 LR to LR CC 2015. I realized that the LR Catalog backup file (which accumulates during the exit process) fell 2.8 GB (LR 5) to 270 MB, probably due to compression. Can I be sure that the shrunk backup file contains everything what he

  I have improved my 5 LR to LR CC 2015. I realized that the LR Catalog backup file (which accumulates during the exit process) fell 2.8 GB (LR 5) to 270 MB, probably due to compression. Can I be confident that the shrunken backup file contains everything it should?

  Lightroom CC 2015 to zip the backup catalog file, it should be much smaller. So, based on what you said, I see no evidence that something has gone wrong.