The catalogue is compatible between windows 10 and mac OS (El Capitan)

I'm trying to understand if my catalog for Lightroom version 6 is compatible on Mac OS and Windows 10?  I have potentially (looking for a laptop) to pass between the two on the external drive and want to ensure it will work in a transparent manner.

Hi squint10,

Yes, the same Lightroom Catalog is compatible with Windows and Mac.

Please see the following article: use a Lightroom catalog on Mac and PC. Omnium Gatherum of hani

Let me know if it helps.

Kind regards

Tanuj

Tags: Photoshop Lightroom

Similar Questions

  • Problem to create the Internet connection sharing between Windows XP and Windows Vista.

    Original title: Internet connection sharing between Windows XP and Windows Vista.

    Hello

    Recently, I plugged a laptop running Windows XP to a desktop computer running Windows Vista using a standard Ethernet cable with the intention of use sharing of Internet connection. The notebook contains a wireless connection that I've routed to the office via the cable said.  While the initial phase of installation went well (I was too lazy to do it manually, so I just used the Wizard "Set up a home or small business network" Windows XP,) I had to turn off the host computer to install a program. When I tried to set up ICS again, I couldn't connect to the Internet by using ICS. After this failure, I tried to configure the properties of TC/IPv4 (IP, gateway by default, etc.) manually, but I still couldn't run.  I am able to access the shared host PC and client files. It seems to me that some service essential to the proper functioning of the ICS may be disabled in some way, but it's just speculation, as I have no evidence of such a service. Help would be most appreciated.

    Thank you

    FG-man

    I tried this before using a laptop to share internet with my 360.  problem is there was Nat on the router, and it is in contradiction with the ics.

    Anyway long story short I did some research on the Internet and discovered that if you're behind a router ICS will be confllict with her, as ICS also does routing. a much better option is to "bridge the conections ' on the laptop.

    http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/hnw_bridge_install.mspx?mfr=true

    If you go this route, you need to set a static ip address for the office,

    Either that or if you want to continue using ICS put the laptop in the DMZ in the router may help, but it will be less secure.

    Hope that this helped good luck

  • When I use the wizard to transfer between Windows XP and Windows 7 files disappears from Windows XP?

    When I use the files and settings between XP and 7 Transfer Wizard files on XP removed or will I still have the original as files?

    The files and Settings Transfer Wizard won't work on Windows 7, you must use Windows Easy Transfer.  But in both cases, the original files are copied only - not deleted.  They remain on the source computer.

  • Lightroom will not recognize the camera capture attached using Nikon D610 and Mac with El Capitan

    Lightroom does not recognize my Nikon D610 when I try to use the captive capture.  The camera has been recognized until I updated to El Capitan.  I understand that there was a problem with the new operating system, but I was hoping it was fixed.

    Hi Nikon_Guy_810,

    Still, there is a recurring problem with Nikon and El Capitan.

    Please see the following article for updates: Lightroom and El Capitan | Mac OS 10.11

    Kind regards

    Tanuj

  • What is the difference between Windows Mail and Windows Live Mail?

    Separated from this thread.

    I realize that starting from 7/11, Windows Live is more effective on my Windows Vista system.  I understand that and I have since beengetting my Hotmail acc't workingusing only Windows Live Mail.  This am, I tried to create a new account hotmail for my friend, but we couldn't get it to accept and just stopped trying.  Now, today, I can not send any e-mail because "you cannot configure Windows Mail to use a web (HTTP) that is running Windows Vista based."  WHA?  I managed somehow to get into Windows Live when I tried to get a new account hotmail for my friend?  Also, I also receive a message from the Assistant on "you want to want to leave, you have not created your new account?  (probably not the exact wording).  In response, I clicked Yes and no, and still I can't get out of this Windows Live.  I would like to purge my system of this needless to Windows Live and only use Windows Live Mail.  Can someone help me to do this?  (My knowledge of couputer is at a basic level, so hopefully it won't be too difficult to understand.)  Thank you!!!

    (With the HTTP mess), it seems Windows Mail and Windows LIVE Mail are two very different things.

    I am not a technician, but try to stay up-to-date. I have known that Vista sucks because it came out, but it surprised me, never have used before today. So I wonder...  Windows LIVE Mail can be installed on a Vista unit, and if so he would remove the format HTTP bug? It's all THE Microsoft, after all! On my PC with Windows 7 HP with complete Essentials, including Live Mail (for PC, to avoid confusion with the version online), I have not had any problems to Hotmail at work, send or receive. GMail also, no problem, the only thing I did NOT like about Live Mail is that it doesn't have the handy function "Sweep" that I love, I just go online to own things very quickly. With only Windows Mail (which I assume is supplied with Vista), it won't let me even try to set-up Hotmail/Outlook account. It's stupid, because like I said it's all EM!

    peace ~

    Windows Mail is the e-mail that comes with client program and a part of Windows Vista. Windows Live Mail is a program available for free download; It is an e-mail client, the timing, the Manager contacts, aggregator and newsreader at a single feeding program.

    Until a few years ago, it was possible to synchronize the Hotmail accounts with e-mail clients on Windows XP and Vista (Outlook Express and Windows Mail respectively) using WebDAV over HTTP protocol. This method has been deprecated after a long sequence of initialization in September 2009. Before that date, POP3 access has been made available for all Hotmail accounts. At any time it was not possible to access Hotmail email clients accounts. There is no bug involved here, nor in HTTP format or anything else.

    Windows Live Mail is built to use a different former WebDAV protocol; DeltaSync protocol allows the synchronization of e-mail folders, contacts, and calendars between client and server.

    You may be able to download the installer for Windows Live Mail 2011 of this page: How to install Windows Essentials while offline? Do not try to include Windows Live Writer or Messenger in the installation; None of them will work and you can gum up toward the top of the entire installation Essentials if you do. It may be better to stick to one mail at first. Windows Live Mail 2011 is the latest version which runs on Vista.

  • Call the scam; Error message "fault had been detected between windows 7 and Chrome.»

    * Original title: is 1866 324 6719 call a call scam?

    I was working in Chrome and suddenly the computer started beeping wildly and I got a message that a malfunction has been detected between windows 7 and Chrome.  IT gave a number without charge 866 to call and said not to stop the computer or my operating system is compromised.  And it will allow me to close the window chrome.  My gut says it of a virus, but want to be sure before we do anything.  Course of windows essentials security scan now.

    It's a scam call caused by malicious software (which is a nuisance rather than a threat). Do not call this number and in no case give some foreign to your PC access.

  • What is the difference between windows live and office live?

    What is the difference between windows live and office live?

    RM

    Windows live mail is a free email client.  Microsoft office Outlook is a complete recommended paid e-mail application.

  • What is the difference between Windows 7 and Windows 7 Starter?

    Original title: "what is the difference between Windows 7 and Windows 7 Starter? I want to install Windows on a laptop... I noticed that some of them offer Windows 7 and others offer Windows 7 Starter.  What is the best, most complete? »

    What is the difference between Windows 7 and Windows 7 Starter?  I want to install Windows on a laptop... I noticed that some of them offer Windows 7 and others offer Windows 7 Starter.  What is the best, most complete?

    On Tuesday, November 9, 2010 22:52:15 + 0000, cvzimbaldi wrote:

    When it says that windows 7 Home premium is an upgrade to windows 7 starter edition, means that the home premiun cannot upgrade Vista?

    I do not understand the question above, but to answer your question in
    the subject line, "what's the difference between Windows 7 and.
    Windows 7 Starter? "the Windows 7 Starter Edition is not another
    operating system, it's just kind of Windows 7. And it is the lowest
    level editing, so you can pass her to another level such as
    Windows 7 Home Edition.

    Ken Blake (MS-MVP)

  • Compatibility of the presets to export between CS5.5 and CS6?

    I have a ton of custom presets that I have developed over several years. I tried to import in CS6 copying presets custom from here:

    \Users\ <user_name> \AppData\Roaming\Adobe\Common\AME\5.0

    here:

    \Users\ <user_name> \AppData\Roaming\Adobe\Common\AME\6.0

    I can see the presets custom in the SOUL, but only SOME of the presets in the format/preset export settings of Premiere Pro CS6 boxes. for example AVI appear but not the presets for H264 or Windows Media formats etc. (they do not appear).

    The presets are incompatible between CS5.5 and CS6 for some formats (maybe there are new parameters that were not in the old version)?

    Thank you

    Paul.

    Hi Paul,.

    Some of your CS5 presets are compatible, some are not. There was enough significant changes to several of the encoders in CS6, data contained in the old presets are more correctly. I can't remember full on top of my head, but Windows Media permanently changed. You will need to rebuild these presets from scratch.

    A confusing area is in CS6 SOUL, we have a new encoder H.264 and H.264 Blu - ray, as long as the older encoders that are now marked (legacy) H.264 and H.264 Blu - ray (Legacy). (For the record, MPEG4 has also falls in this category.) If you import old settings preset for these formats, they will be added to encoders of legacy, but not the new encoders;

    Rather than copy and paste files predefined in the folder, I suggest that you use the import function (under the new Preset menu or the button in the new browser built-in) to add the files to SOUL CS6. You should get a warning appropriate via this method if the screening is not compatible with all encoders, rather than silent failure occurs when you place them in the folder.

    -= TimK

  • How to share files between Windows XP and Windows 7 without password?

    Hey guys, I want to share files between windows 7 and windows XP. I don't want to put the password on my Windows 7 or Windows XP account. I am going on my Windows XP perfectly shared files from Windows 7, but I am not able to go on my files of windows 7, the cause of my XP he asks user name and password. I enter the user name and it does not accept it if I make a password for my windows 7 and enter as the user name... I don't know what to do guys any help?

    Windows 7 only WILL NOT allow you to share files without a password, it's all just a common sense safety requirement.  It of a very bad practice to run your Windows installations with a null value, a password, give your facility a valid password.

    The simplest around your problem is to create an account with the same names and passwords on each machine and so typed the password when the connection is too a problem allow AutoLogon on the machines.

    John

  • When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

    Original title: fingerprint digital mapping

    When I try to use a MS fingerprint reader I get the message "no mapping between account names and security IDS was done."

    I tried the fix (http://support.microsoft.com/kb/890737?wa=wsignin1.0) without success.

    Any ideas?

    Hello

    Have you tried to reinstall the fingerprint reader, as mentioned in the previous post article?

    If your computer is on a domain, the question you posted would be better suited for the IT Pro TechNet public. I would recommend posting your query in the TechNet Forums to get help:
     
    For more information, see the articles:
     

    Hope the helps of information.

    Let us know if you need help with Windows related issues. We will be happy to help you.

  • Sharing data between Windows Vista and Windows 7

    As Windows Vista cannot join the homegroup, which is a feature of Windows 7, how the files, folders or drives are shared between Windows Vista and Windows 7?

    Hello

    Set you up a network between Vista and Windows 7:

    "Networking of computers running different versions of Windows.

    http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-Vista

    http://Windows.Microsoft.com/en-us/Windows/networking-home-computers-running-different-Windows#networking-home-computers-running-different-Windows=Windows-7

    "Learn how share files and printers on a network with computers running.
    Windows XP, Windows Vista and Windows 7. ... This article also covers the
    necessary parameters to set up file and printer sharing on your network. »

    See you soon.

  • Sharing files between Windows 7 and Windows XP suddenly stops working

    I have a set up working groups between Windows 7 and Windows XP computers.  I don't usually have a problem of file sharing, but suddenly XP computers do not connect to the server from Windows 7.  It will work for a while and then stops.  In order to solve this problem, I have to restart the server from Windows 7.  However, this problem occurs more and more and I would have preferred to find a permanent solution.  I checked all the normal solutions (IE firewall, no passwords, etc.), but I still have this problem.  I'm sure that all my settings are correct, as I am able to connect most of the time, but I know that there must be a solution out there to fix it permanently.

    I read a post that I'm not sure is related to my question:

    This problem may occur if the IRPStackSize registry entry on the server is set too low. I was unable to connect to the XP PC from any other PC on the network. Set ip 15 and problems went

    If that is related, please let me know.

    What is a patch that I need to download for XP computers?

    Any help would be grateful.  Thank you!

    I suspect that the limit is 5 concurrent connections for Windows 7 Home Premium, but I still need to find a reference book Microsoft.
    _________________________
    ID #0227. If this answer was helpful, you can vote by clicking on the green triangle. If it solves the problem, click 'propose as answer. Thank you.

  • Comparison between Windows Vista and Windows 7

    Hi, can you help me please make a better decision?

    I am faced with a decision to make between windows Vista and the new Windows 7. I am currently using Windows Vista Home Basic (32 bit) that currently gives me a lot of problems. Now I think investing in a newer version of windows.

    Can you please recommend me in terms of:
    1 price
    2. Security
    3. ease of use
    4 reliability
    5. fitness for purpose domestic to small business (Home Office)
    6 connection to a network environment that has other versions of Windows, for example XP
    7. the ability to manage multiple processes simultaneously
    8. the programs that run on windows vista will run on windows 7? I have an accounting program I use so I would like to know if I will not have a problem if I choose windows 7

    I have an offer to buy Windows Vista Ultimate and I want to compare it to Windows 7 Home Premium

    1. Windows 7 is less expensive than Vista, version for version
    2. Windows relies on Vista security
    3. Subjective - if you've never customized XP somehow, you should get good enough with Vista or Win 7
    4. Windows 7 has proved to be reliable in the tests.
    5. Since the release of XP, all Microsoft operating systems are good for the environment
    6. Windows 7 and Vista will be connect to XP
    7. Windows 7 and Vista is better than XP
    8. Generally Yes, but there may be drivers that have been coded to search for a specific operating system. It is a business decision made by the suppliers of hardware and software that allows them to continue to support product as he approaches the end of its product lifecycle, or push the consumer to buy a newly released product

    If you do not require Bitlocker encryption or the ability to connect to a corporate domain, Windows 7 Home Premium is fine to do the job. You must keep in mind that are supported for Vista "home" versions, and that includes 'Ultimate', will end in 2012, where the support of Windows 7 will be ongoing.

    In my opinion, you would be better advised to go to Windows 7 now and miss out on the stage of Vista...

    Mike Hall MVP - Windows Desktop Experience http://msmvps.com/blogs/mikehall/

  • Printing problems home network between Windows XP and Windows 7 PC base

    I've seen a number of comments about problems between Windows 7 and Windows XP computers print domestic network.  In my case, I have a new Windows 7 Desktop connected to my printers and wireless modem and I use several portable Windows XP in the House that I am trying to reconfigure to wireless network printing.  My old desktop running Windows XP and I had this printer sharing wireless works fine.  I can't get the right of sharing the printer with Windows 7.

    Can anyone help?

    Roger Phillips

    This sounds like the correct driver and is supposed to be OK for the network or directly connect according to the HP website.  There could be something in the fine print of the following HP support document that will help you: http://h20000.www2.hp.com/bizsupport/TechSupport/Document.jsp?objectID=c02171232&lang=en&cc=us&taskId=101&contentType=SupportFAQ&prodSeriesId=1845551&prodTypeId=18972 otherwise, the guided "Troubleshooting," "automatic Driver Verifier", or links to "Resources for collaboration" in what follows may help: http://h20000.www2.hp.com/bizsupport/TechSupport/SupportResources.jsp?lang=en&cc=us&prodTypeId=18972&prodSeriesId=1845551

Maybe you are looking for

  • Connect the Middle 2010 21.5 "iMac for mid 2011 21.5" iMac in target display mode

    Hello I looked for an answer to my question and I'm not 100% clear, so I ask your help please. I have an iMac 21.5 "2010 middle which I want to connect to an iMac 21.5" 2011 mid (which I think the purchase) in order to have two screens. I know it can

  • OfficeJet 5740: Photo printing is spread

    Using glossy HP with the new printer, we could not print photos without them being spread.  We have tried to use my Mac and my husband using Windows 10 Dell.  Both created smeared, wet photos. It prints photos on paper.  But we have problems with the

  • Streets & trips 2008 stopped working and now won't load

    I was working with streets & trips, went to another program and returned. Clicked on the icon got the hourglass momentarily then nothing. Tried to reinstall the program without help.  Thank you

  • How to access the files after you put the hard drive in the external case

    I dropped my laptop and it is split.  I bought an external case for hard drive, only to discover, when I try to access the files, I'm not authourized to do.  I know the password, how do I access files, without having to pay someone a large sum of mon

  • USB - LAN driver required

    I can't have my Sn54ls164j ADM8511 USB converter Fast Ethernet (pilot) to work under Vista. I search the web but not a solution in sight... Really frustrating. Will be very grateful if anyone can help. Thanks in advance.