The cheapest way to produce a TTL pulse using a chassis SMU-1062 q

Similar Questions

• What is the best way to Sync Output (TTL) digital with analog output?

  I'm trying to generate analog signals that synchronize the rising edge of a digital signal (TTL). The ttl will be the trigger for the camera. The advice I have is USB-6343 X. In my project, I used a clock as a ttl so I can give frequency easily. Could someone tell me what is the best way to accomplish this task? My project seems to work, but I hope it has more neat way. Thanks in advance for any help!

  Kind regards

  Eric

  Hi Econg,

  They should be nanoseconds, if any, there is a trigger of material goes with a hardware clock.

• How can I get more space storage [SATA], the cheapest way?

  Hello everyone,

  I have an Asus M2N68-AM Plus Motherboard in a HTPC with all busy SATA connectors. What can you guys come up with as the best way to add more space for extra storage [via SATA]?

  1. change of Mobo?

  2. switch to HD?

  3. a controller card?

  4. others?

  Note: The main idea is to maintain the existing HD, because I don't want to keep or lose money by selling unused.

  Kind regards.

  This or something Simular give two internal drives more

  http://www.Amazon.co.UK/port-expansion-via-VT6421a-chipset/DP/B000S87GG0

• What is the best way to send personalized mass emails using Mac Mail?

  Attempts to send mass emails (in bulk) to a custom list of customers (less than 100) with a greeting / salutation. What is the simplest and cheapest way to do it?

  The App store has a few options, but not one with a qualification or a review. Online searches are not very convincing.

  Apple is usually easy to use and easy with these small details, but it is a nightmare, and I don't see why it should be so complicated (although I'm still hoping there is an easy work around or something, outside writing each message individually).

  Any help is very appreciated!

  In all honesty I suggest that you find a good online service to do it for you...

  http://MailChimp.com

  Or one of the many others.

  These services have the ability to manage the e-mail in bulk. E-mail servers will block your messages if you seem to be spamming, there are a lot of issues to be addressed (addresses failed, bouncing mail, management of requests to subscribe / unsubscribe...). I suspect it's more trouble should manage it all yourself.

• What is the best way to run two concurrent programs using the output of either executing the other?

  I wanted to just kind of get a notice of some people here. I have two main screws the first is a data acquisition system that displays 99 different sensors and which feeds on these data in a table. The second is a real-time processing system that is designed to take the painting and do many calculations. The two output data from screw at the front that I want to see, so I don't want to use just as a Subvi.

  Is there a simple way to run two screws, using the output of the data acquisition system to power the processor so that you can easily see the signs before two screws? I had thought to simply copy the code from the processor in real-time in the DAQ VI, but I fear that the VI resulting will be very large and unsightly.

  On a side note, I'm more thinking about this? I apologize if this is a stupid question, it has been a long week... aaaand it's Wednesday.

  Look at the Architecture of producer/consumer.  It will be a good starting point, even if you find that you need to change.  When performing data acquisition and processing of tasks in parallel loops, they can both run simultaneously.  Both can feed data to the main draw of the VI.

  I'd probably use three loops with the third being the user interface only.  All that must be displayed to the user is sent to the GUI of the acquisition of data or processing loop loops and commands or entered by users are returned in these loops, probably through queues.  The wall of the VI of data acquisition and processing VI are never displayed to the user.  Especially the treatment, because it runs on a system in real-time, should avoid synchronization issues that can present a graphical interface.

  Lynn

• What is the best way to make a certification page using headings to TOC?

  I work in FM11. I need to make a layout of certification with each title (title 1 - Heading7). Certification pages should look like this:

  Date of certification	Section (Headings1-7)	Pass	Do not	Comment

  I have 20 pages of table of contents, and if there is a relatively simple way to create a table with the TOC titles that would go in the column heading, it would save a lot of time. Thank you.

  You could try a two-step. First create a LOP (list of paragraphs) which contain level headings you need (you may need to adjust the Scriptures of reference page to give up things like the page number).

  Convert a table from the list, then add columns and headers as needed.

• Can you have SMU 1062 q turn on without using the power button

  I use a q SMU-1062 for a test project that will take place inside a protective case.  The power button on the chassis will be covered by a plate on the protective case that make it boring and difficult to switch on using the power button on the chassis.  The chassis will be plugged into a power strip of travel - lite which is mounted in the case.  Is it possible that I can have the power to frame on when I turn on the power strip?

  I found another route.  In the controller BIOS, I changed the parameters of loss of AC power to TURN on after that AC is returned.  This allows me to use the power strip in my configuration to control the electric network distributed to the controller.  The following steps will describe how I got this.

  1. Power of the SMU-8115 controller.
  
  
  2. A message will appear on your screen, press to enter SETUP
  
  
  3. Select 'Remove' (quickly, because you don't have a lot of time before the window disappears and the controller continues to load normally.)
  
  
  4. This will open the main Menu of the BIOS
  
  
  5. Select the Advanced tab (use the arrow keys to highlight the selections and the different tabs, select a setting change with 'enter'
  
  
  6. Select > Configuration power and rest
  
  
  7. Change the configuration to power on when power is restored.

  The controller can be normally close by using the start menu, and "shut down".

  Start button / stop of the chassis is still capable of turning the power on to the controller, but now when I shut off the AC power strip and then return power, get the controller chassis.

• What is the best way to update a folio produced by someone else?

  I need to update the files that have been created by someone else and have already been published in folio producer. The client gave me access to the folio via producer folio DPS.  What is the best way to get access to the InDesign via Folio Producer files? Or so I have to go back and get the InDesign files? Sorry if this has been covered somewhere else recently, but all I saw were older. Thank you.

  You cannot access the ID files by producer folio. I usually work in a dropbox folder so everyone on the project has access.

• Satellite 2410: Question about the different ways to use BlueTooth

  Hello

  I can't find a place to buy a bluetooth module for my Toshiba Satellite 2410 - the manual says I can, and I know that there is space on the underside of the laptop to insert it.

  I can't seem to find one to buy - anyone know if they actually exist, because I'm starting to think not? ! .. .where is the best way to bluetooth enable laptop to buy a USB adapter?
  If so, a good market will affect the download speed when using the Internet? And what is the difference between an SD card and a USB bluetooth adapter?

  Any help would be appreciated.

  Hello

  I don't know your name of your Satellite 2410 but I found that a similar Satellite 2410 603 on the Bluetooth device is not available. Only the WiFi card is optional. This means that it is possible to install a wireless network card. The slot for the update of the Wlan card you will find at the bottom of the unit AND NOT the Bluetooth slot.

  However, if you want to use BT technology so the easiest and cheapest way is to buy the USB Bluetooth key.

  PS: BT has nothing to do with the internet, and it has no negative influence on the data downloading or transmission of data from the internet.

• Can PCI 6602:How I use digital lines of the Board of Directors and at the same time to generate trains of pulses by using a meter?

  Hello!

  My problem appeared when I tried to update my traditional NOR-DAQ legacy code to DAQmx.

  I use 2 meter (meter 5 and 7 meter) on PCI-6602, to generate trains of pulses, as well as the lines of e/s digital port 0 (the form lines from 0 to 7). What I do in my request, it's that I'm starting to generate the pulse train on the output of 2 meters and after that I play with the State of digital lines.

  Traditional, it was no problem to use the meters and digital lines at the same time, everything went perfectly, but in DAQmx, is not possible.

  What's happening: I start generating train of pulses on the output of counters, no errors, but when I try to change the State of a line of digital port the generation of the pulse train is stopped. What happens when I start the task associated with the digital way.

  My question is: is it possible to create a channel on digital lines without changing the channels created for meters?

  Another thing that I managed to do with the panels 'Measurement and Automation Explorer' and Test for PCI-6602, is basically the same thing, I generate trains of pulses on the output of the 7 meter and try to start a job on the digital line, but I get an error:

  "Error-200022 occurred in test Panel.
  Possible reasons:
  Measurements: Resource requested by this task has already been reserved by another task.
  Device: Dev4
  "Terminal: PFI8.

  On the contrary if I use the counter 0 or a counter 1 to generate trains of pulses I encounter the same problem.

  What resources are used by 2 to 7 of the PCI-6602 card counters and the counters to 0 and 1 do not use?

  Thanks in advance for any answer!

  Ciprian

  After doing some real tests on this device, I found that it is a normal behavior for the jury of 6602.  This is because when you start a task digital all 32 lines are configured for digital i/o, so it replaces your meter operation.  The article below the link explains a little more on this subject.  You must start the digital task before the task of counter to use the features of both in your program.

  2 meter and above will not work correctly when you perform digital i/o on NI 6601 or 6602

  http://digital.NI.com/public.nsf/allkb/43F71527765EEC3886256E93006CD00C?OpenDocument

• What is the best way to have an indicator that scrolls the content of a table that is updated during the execution of a program?

  I have a program that runs continuously. During this time the errors are produced and I store them in a table. What is the best way to display the table in a window that the user can scroll upwards or downwards, while the program is running?

  Thank you.

  Hi chuck,

  If allowing you to feed two tables to the table you will see also all of these channels in the table

• I downloaded the "Paretologic PC Health Advisor.exe' and he said: I have several proplems registry, but I have to pay to correct, this is the only way to solve my registry problems?

  I downloaded the "paretologic PC Health Advisor.exe" and he was not able to solve the problems because I had too many and had to buy a license. What is the only way to solve these problems? According to analysis, there are 616 detected items

  Hello

  If you have problems with system start a new thread, and we can help you with those.

  This program is essentially RegCure (another of their products) renamed with a few gimics
  added. He and produced still too hype, are snake oil that causes a lot of
  questions all distressed little. Replace the PC Health Advisor for the RegCure word in the below
  and you'll get the idea.

  I would like to ditch RegCure like a hot potato
  http://www.MaximumPC.com/article/watchdog/is_regcure_legit
  RegCure Review consumer: Forget what others say, is that the words you need to hear
  On RegCure July 2009

  http://www.Docstoc.com/docs/9822187/RegCure-consumer-review-forget-what-others-say-this-is-the-words-you-have-to-hear-about-RegCure

  http://www.articlealley.com/article_1007818_11.html

  Free registry cleaner software - why pay when you can get it for free?
  http://software-Adviser.SynthaSite.com/free-registry-cleaner-software.php

  Seems that these sites that encourage these poor products are all part of the scam. They
  understand a couple or legitimate products (as appropriate), and then note all their products higher and
  they are practically the same.

  Unless you know how to recover from a wandering deletion and which can be extremely difficult it is better to use a registry cleaner. They "fix" very little and 'BREAK' a lot

  Run RegCure uninstaller C:\Program Files\RegCure\uninst.exe

  Check the info here:
  http://www.ParetoLogic.com/resources/help/RegCure/source/uninstall.html

  Or use Revo to uninstall:

  If RegCure is running use TaskManager to close (end) - right click on the taskbar - task manager

  Revo Uninstaller - Free Version
  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  I hope this helps.

• The right way to face the camera and camera on standby?

  How one brings the camera back to life after the unit returns to standby mode?  What is the right way to manage the device sleep and wake?  Any help is appreciated.

  Hi Sucroid,

  I intend to produce a sample that shows this I hope that during the holiday season.

  Here is some information that can hopefully help you get started...

  When the screen goes to sleep, off camera equipment.  There is nothing you can do about it today, outside of the application one keep awake in your application window. (value SCREEN_PROPERTY_IDLE_MODE SCREEN_IDLE_MODE_KEEP_AWAKE).  Note that this won't save you a user who clicks the power button to force the unit in standby mode.  It will protect you against a situation where your application goes to background or another application requires video resources that are used by the camera.  In these two situations, your application will lose his viewfinder.

  But all is not lost!  There are some events of status, you can listen to that lets you know that the camera stops.  You can listen to these events either with an attached status_callback (applied when starting the viewfinder for example), or by authorizing explicitly state the events using camera_enable_status_event() and waiting for impulses of status.  All these things are detailed in the documentation for the API of photo here: http://developer.blackberry.com/native/reference/bb10/com.qnx.doc.camera.lib_ref/topic/overview.html

  The corresponding lights events are:

  CAMERA_STATUS_RESOURCENOTAVAIL - this event is logged every time that the camera is about to close.  If you have previously called camera_register_resource(), this is the event that listen to you to know that all your camera buffers are about to be démappés - so stop all logic that looks at them and then camera_deregister_resource() camm.  If you do not physically the buffers of viewfinder, then necessarily no need to use this registry/invert mechanism.  It's just there to provide warning and to activate the drivers of the device for you to recognize that it is safe to unamp wait for memory.  Each time the screen goes to sleep, the power button is pressed, or another application has need of resources of the camera, you will get this signal.  If you are curious to know the reason, you can check the 'extra' uint16_t argument in the callback of the situation for one of the camera_powerdownreason_t values.  All video recordings currently active or encodings auto-terminera when this signal is received.

  CAMERA_STATUS_POWERDOWN - event status is reported immediately after the hardware of the device is turned off.  You can't interact more with the camera until this condition is removed.  Note that to capture this event, you will need the user of the status of the event-mode (camera_enable_status_event()) interface, because any reminder of status you can have attached when starting the viewfinder will be cleaned up when the viewfinder stops.

  CAMERA_STATUS_POWERUP - event status is reported immediately after that camera material is fed up after having previously be put off.  Even not not on using status of event-mode interface (camera_enable_status_event()) applies in this case too.

  So, what can you do with this information?

  Well, tuned for CAMERA_STATUS_RESOURCENOTAVAIL will tell you when your viewfinder will close.  At this point, your application must enter a State where he is waiting for an event that will wake it again...

  In most cases, this is the event browser that indicates your application is active or foreground again (NAVIGATOR_WINDOW_ACTIVE or equivalent).

  So when your application is told by browser is it back to the foreground, you can then restart the viewfinder using camera_start_photo_viewfinder() or camera_start_video_viewfinder() according to the requirements of your application.  You will still need to follow the same recipe to start the viewfinder as a cold start your application (for example. Wait for the window of your viewfinder to be filled), but you will not need to reconfigure all the settings.

  OK... which covers 99% of the use cases that you will encounter.  Use case for the 1% remaining, you will need to follow for this CAMERA_STATUS_POWERUP event.  Why?  Well, there is a race condition when things down, in which case if the user wakes up the device while the camera is closing (eg. they struck twice in quick succession, the power button), then the camera will enter its off State, but navigator may actually not report your application it becomes idle.  This is because the infrastructure of power management is waiting actually for the material from the camera to the power off until the system goes to sleep.  If the user wakes up the device upward, then this action is canceled, and the unit enters never actually standby.  In this case of corner, navigator does not say your app to become active, again because he never told your application becomes idle.  So what are you doing?  Well, I have 2 suggestions:

  1. You can follow to CAMERA_STATUS_POWERUP using the event interface mode for the camera equipment.  It's actually the more correct approach and what we are doing internally with the BB10 camera App.
  2. You can use a timer to try to wake up the camera in the case of this corner case occurred.  for example. wait 5 seconds after the signal CAMERA_STATUS_RESOURCENOTAVAIL.  If your application has not been made inactive by browser, then you can try turning it back on the camera.

  I hope this help get you pointed in the right direction and still... I plan on collecting a best-practice appropriate sample that illustrates exactly how to do this when the weather!

  See you soon,.

  Sean

• I'm looking for the best way and the best way to get a product key for my windows 7 Edition family.

  Hello.  I'm looking for the best way and the best way to get a product key for my windows 7 Edition family.  Thanks Bob

  Original title: product windows keys 7

  The cheapest option is the OEM System Builder for Windows 7 Home Premium license, but has some license restrictions:

  Amazon.com: Windows 7 Home Premium 64 - Bit System Builder...

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  What is OEM software? :
  http://support.Microsoft.com/GP/oemsupport_1/en-GB

  Licensing FAQ:
  http://www.Microsoft.com/OEM/en/licensing/sblicensing/pages/licensing_faq.aspx

  OR

  A detail that does not have these restrictions:

  Where can I still get Windows 7?

  Full version - Microsoft Windows 7 Home Premium

  Version upgrade - Microsoft Windows 7 Home Premium Upgrade

  Family Pack: Upgrade of Microsoft Windows 7 Home Premium Family Pack (3 users)

• Cheapest way to get a valid license for my old computer?

  I transferred my retail Windows 7 Home premium license to a new computer and I want to give the old computer to a friend who is a broke student and currently computerless. I need to give him a BONE to work with. I know that I need a new product key for this computer, but I was wondering what is the best way to get one on this subject. $99 for a new copy of Windows is a bit hard to swallow. MS offer discounts on licenses Win7 on existing facilities? What the route of upgrade of Windows 8? Do you get a new product key with a Win8 upgrade or should I just use your old license?

  Thank you.

  Microsoft doesn't sell even Windows 7 more.

  The version of Windows 7 Home Premium OEM $ 99 is the cheapest, you're going to get. In fact, since a student, it would be wise to install Windows 7 Professional, which is $ 139.

  Or, if the computer is up to it, go for Windows 8, which is also the same price as OEM of Windows 7 versions.

  Since there is no previous version of Windows on it, you wouldn't be able to use any version upgrade of any update of Windows, not even Windows 8.

  Microsoft offers discounts on Windows with the exception of the Windows 8 Pro upgrade and even that will be completed in January.