The CLI commands to install patch bundle ZIPs?

Similar Questions

• What is the CLI commands

  What is the CLI commands to monitor a router interface (800 series) 'live '? Watch the increment of packages.

  I have provided links to the appropriate documentation. First you will need a basic understanding of the command line Interface (CLI). Then, you can use the commands to enable Capture of integrated package.

  Using the command in the Cisco IOS software command-line Interface

  Cisco IOS embedded packet Capture

• What is the CLI command in ESXi 5 to check port was to bind to the iSCSI adapter.

  Hello

  
  

  It is the command in ESX 4.1 to verify that the iSCSI port is linked with the adapter
  

  
  

  #esxcli swiscsi nic list vmhba d
  
  
  I wanted to know the same command in ESXi 5 to check that my port is bind (I did with vSphere Client).
  
  
  I pulled this same command, but it throws error "namespace" something.

  Help, please.

  
  

  There are some commands ESXCFG had replaced by some other commands in ESXi5. Please take a look at the link for all orders for replacement of ESXi5.0 below.

  http://pubs.VMware.com/vSphere-50/index.jsp?topic=/com.VMware.VCLI.migration.doc_50/cos_upgrade_technote.1.9.html

  "esxcli iscsi" is the command for all iSCSI related research in ESXi5.0.

• The fix command line install ColdFusion 11 9 fails

  When I run the patch from the command line by using this statement:

  D:\ColdFusion11\jre\bin\java.exe-jar D:\ColdFusion11\cfusion\hf-updates\hotfix_009.jar-i silent f D:\ColdFusion11\cfusion\hf-updates\my-server-name.profile

  I get the following error:

  Error: Could not find or load the class main D:\ColdFusion11\cfusion\hf-updates\hotfix_009.jar

  I also seems to ignore the profiles option, because I see the following new folders in the C:\ drive.

  C:\ColdFusion11

  C:\hf-updates

  C:\hf-11-00009

  Is the broken 9 patch, or is this just me?

  [This message has been edited, I have removed superfluous information.]

  My my-server document - name.profile has been altered causes a problem during the installation.  Corrected a .profile file using has solved the problem.

  INSTALLER_UI = SILENT

  USER_INSTALL_DIR = D: / ColdFusion11

  DOC_ROOT = D: / ColdFusion11/cfusion/wwwroot

  #The following only applies to multi server scenarios.

  INSTANCE_LIST = cfusion

• Darwin.CLI: most of the cli commands is not available

  Most of the command-line to point 6.1 does not for example to vcloud led application 6.1

  
  list-cloud-tunnels' was found but is not currently available (type 'help' then ENTER to learn more about this command)
  

  Spring > create cloud tunnel

  Command "create cloud-tunnel" was found but is not currently available (type 'help' then ENTER to learn more about this command)
  Spring > cliversion
  vCloud Automation Center Application Services CLI 6.1.0 BUILD - 2064245
  Copyright (c) 2011-2014 VMwareInc. All rights reserved. This product is protected by the U.S.
  and the international laws of copyright and intellectual property.
  VMware products are covered by one or more patents listed in the http://www.VMware.com/go/patents
  Spring > display user

  
  "View user" command was found but is not currently available (type 'help' then ENTER to learn more about this command)
  Spring > list-cloud-tunnels
  'List-cloud-tunnels' command was found but is not currently available (type 'help' then ENTER to learn more about this command)
  Spring >

  Thanks for your help, you are right, but I didn't know how to do it. the documentation could be updated to reflect the it. Here's how I work.

  Login serverUrl- https://**.**.**.**:8443/darwin - [email protected] - password username *-tenantId tennantnamehere

  Thank you

  Niasse

• How to update the data of the CLI command line interface store

  Dear friends

  I use VMWare Server 2.0 on a debian linux server.

  I need to be able to update the store data from the command line, this because I put the command Refresh within a bash script.

  Of course, I know how the web management, but as you understand, I need to do from the console.

  Thanks for the answer, help or advice

  Robert

  Post edited by: FAsTec

  Hello

  Try vmware-vim-cmd.

  As in:

  vmware-vim-cmd /hostsvc/datastore/refresh
  

  You may need to add the store of data as a parameter.

  See also:

  http://www.VI-Toolkit.com/wiki/index.php/hostsvc/datastore/refresh

  Beware that your username must have good credentials to run the command.

  Hope this helps

  --
  Wil
  _____________________________________________________
  VI Toolkit & scripts wiki at http://www.vi-toolkit.com

  Writer to the blog www.planetvm.net

  Twitter: @wilva

• CLI command to set the power of 1231

  Anyone know the CLI command to fine-tune the power on a 1231 AP?

  Hi Timothy,.

  Maybe it's what you're looking for;

  local power

  Use the command from the interface of local configuration to configure the access point or bridge of power level of radio. No form of the command to restore the default setting. On the 2.4 GHz radio 802.11 g, you can define orthogonal frequency Division Multiplexing (OFDM) power levels and levels of power complementary Code Keying (CCK). CCK modulation is supported by the devices 802. 11B and 802.11 g. OFDM Modulation is supported by the 802.11 g and 802. peripheral 11A.

  Radio 2.4 GHz Access Point (802. 11 (b)

  [No] local power {1 | 5 | 20: 30 | 50 | 100 | maximum} 3

  Radio 2.4 GHz Access Point (802.11 g)

  [No] power local cck {1 | 5 | 10 | 20: 30 | 50 | 100 | maximum} 1

  [No] power local cck {-1 | 2 | 5 | 8 | 11: 14 | 15 | 17 | 20: maximum} 4

  [No] ofdm local power {1 | 5 | 10: 20: 30: maximum} 1

  [No] ofdm local power {-1 | 2 | 5 | 8 | 11: 14: 17 | maximum} 2

  5 GHz Access Point Radio (801.11 a)

  [No] local power {5 | 10 | 20: 40 | maximum} 1

  [No] local power {-1 | 2 | 5 | 8 | 11: 14 | 15 | maximum} 2

  [No] local power {-1 | 2 | 5 | 8 | 11: 14 | 15 | 17 | maximum} 2

  Note the maximum emission power depends on your regulatory domain and the antenna gain for your access point or bridge. For more information see the "Channels and antenna settings" section of the installation guide hardware for your access point or bridge.

  --------------------------------------------------------------------------------

  --------------------------------------------------------------------------------

  Note the supported transmit power levels on the various points of access and bridges.

  --------------------------------------------------------------------------------

  --------------------------------------------------------------------------------

  Note This command requires radio to be turned on and activated to determine valid power settings allowed on your access point radio.

  This doc.

  http://www.Cisco.com/en/us/products/HW/wireless/ps430/products_command_reference_chapter09186a00804e631f.html#wp2459939

  I hope this helps!

  Rob

  Remember messages useful rate...

• Quick question on Version after installing the Patch Bundle

  Hello

  This is my setup

  O/s: Victoire 2012 Stnd. edition

  DB: Oracle 12.1.0.2

  I installed bundle Win patch 12.1 . 0.2.11 via patch 22005474 on my PIC and PDB.

  I checked it via Opatch lsinventory and executed following on the CBD sql as PDB for to ensure that the system reflects that the correction has been installed.

  The CBD

  select * from dba_registry_sqlpatch;
  

  

  On PDB

  select * from dba_registry_sqlpatch;
  

  

  So my question is very simple, when I ask instance of $ v, should I wait 12.2.0.11 instead of 12.1.0.2.0 in the VERSION column in the instance of $ v just because I installed this patch bundle?

  select * from v$instance
  

  

  -Learner

  Hello

  It would be same 12.1.0.2.0

  -Pavan Kumar N

• !!!!! Drivers for Realtek RTL8111DL VIB and install it via Vcenter, not the cli in a server running ESxi5.5 production

  Hi guys,.

  someone can it provide and show me how to add it to a production of ESxi5.5 Server? I Don t want to customize and ISO and starting from scratch.

  Like many I search I found *. Files VIB and going the Ko, a peek at how to install it via vcenter appears:

  ***********************************************************************************************************************************************************************************

  Existing ESXi installation using VMware Update Manager

  You can install the drivers async on an existing Update Manager VMware ESXi host. For more information, see using vSphere ESXi Image Builder CLI Guide of installation and Installation of vSphere.
  
  Note: Async drivers are developed by third-party providers and are subject to VMware certification. Third-party suppliers provide suggestions/recommendations for updating their drivers/firmware for specific versions of ESX/ESXi. As a result, VMware does not include these async drivers automatically in the Update Manager.
  
  To install the async drivers:
  

  1. Extract the contents of the zip driver async file.
  2. Identify the offline-bundle.zip file (s).
  3. Vcenter Server, go to the home page > Update Manager.
  4. Click the Repository of Patch .
  5. Click the link to the Import of patches at the top right of the screen.
  6. Click Finish. The async driver is added to the repository of the patch.
  7. Create a base Extension Host and sanitize the ESXi host. For more information, see the Guide of Directors of Update Manager.
  8. Restart the ESXi host once the restore is complete.

  
  

  *******************************************************************************************************************************************************************************

  What is the ZIP file of the async driver?  I only found a *. VIB

  What is the offline-bundle.zip file (s).?

  in point 3, I opened my HOUSE Vcenter and I Don t see UPDATE MANAGER, see picture

  
  

  
  

  
  

  So, I'm lost... again ... Could someone provice drivers for a REALTEK RTL811DL and show me how to install it easily in a production server. ?

  Thanks a lot to all

  Jesus

  
  

  
  

  Have you installed the plugin?

  As I said, the VUM consists of two parts: the server and the client plugin.

  You install the server from the installation media and the vSphere Client plugin itself.

  I found a post detailed with screenshots for you: vSphere Update Manager (VUM) (part 2) - Installation

• How can I remove the pop up next to my iMac? "to continue the 'java' command line tool, that you must install the JDK

  I can't seem to make the tour of the following pop up: "to use the"java"command line tool, you must install JDK.  I downloaded Java for many times, but the pop-up Guard reappear.  Is there any solution to get rid of this pop up, it makes me crazy?  Help, please!

  What java you have download and install.  To install is TIME legacy java 6 Apple for OS X, which can be downloaded here: Download Java for OS X 2015-001

  

• I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  I get a message: to use the 'java' command line tool, you must install a JDK.  I tried 10 times to install without success.  Help, please.

  You probably have some of the older than the needs/desires software legacy Java installed.

  Please see these sons of community message:

  After the installation of El Capitan, I get the message: to use the 'java' command line tool, you must install a JDK

  Just found this last Java does not work with El Capitan

  This is the Apple link to the legacy version of Java 6.

  Download Java for OS X 2015-001

  First of all, I would like to try to identify what application generated the next message and update (delete) this request as the case may be. If you need to run Java then, as the Apple Support page says it's certainly preferable that your installation of Java entirely up-to-date with the Oracle's Java course. If you can get without Java, you should install it not - like the Flash, it should not be installed unless you have no choice.

• How to use the /b switch to force patches to install?

  I had the problem that is described in the 980333 hotfix (i.e. the right margin of only the first page gets cut off when printing html email in Outlook 2003 with IE8 installed) but this hotfix will not install on a XP system. I have found a solution to the http://answers.microsoft.com/en-us/windows/forum/windows_xp-windows_programs/outlook-express-6-outlook-2000-and-outlook-2003/8e795be3-aa51-4d98-be2a-fdd28d886d19thread.

  I did the following based on this thread:

  1 has begun with an installation of XP SP3 updated with IE8 installed. At this point, I have the right margin bug in Outlook 2003.
  2 uninstall the last update of security for IE8, which for me was KB2792100. Restarted.
  3 renamed ieframe.dll in C:\Windows\System32 to ieframe.old. Ieframe.dll manually copy the LDR version in the second most recent Cumulative Security Update for IE8, which for me was KB2761465 in the C:\Windows\System32 folder. That version LDR is located at C:\WINDOWS\$hf_mig$\KB2530548-IE8\SP3QFE and is the version 8.00.6001.23458 (longhorn_ie8_ldr.121026 - 1635). Windows Update to install an update that I ignored. Restarted.
  4. check that the right margin bug is now fixed. Windows Update failed to inform me that the most recent Cumulative Security Update for IE8 was now available for install, so I went to start - all programs-Windows Update which has open IE8 and found the KB2792100 so I installed. Restarted.
  5. check the ieframe.dll version that was in my C:\Windows\System32 folder and it was the version of ldr (not the version gdr) as hoped. Confirmed that the bug of the right margin is always fixed.

  6 Windows Update says that kb2792100 is ready to be installed. But I just installed that. So I installed again. There is no error message. I opened Outlook or something and Windows Update says KB2792100 is ready to be installed. Restarted. (Once without installing updates, then stop again with the installation.) I get this update request.

  7. I used Windows Restore to restore to a point before step 1 above.

  8. now, I no longer receive the message Windows Update but I am back to my emails in print. The C:\Windows\System32\ieframe.dll is now: 8.0.6001.19394 (longhorn_ie8_grd.121220 - 1544) with date 26/12/2012 15:16.

  My system is/has:

  IE version: 8.0.6001.18702

  Outlook2003

  Windows XP Professional: 5.1.2600 SP3 Build 2600

  PC x 86

  I don't know if using Windows Restore was not serious (or if he's going to still more dirty things in the long term). How can I undo what I've done (i.e., the fix of Michael who worked well for me)? So, how can I force the installation of the LDR files (I read the article 897225)? First I uninstall KB2792100 or just try to reinstall with the switch/b?

  Your help is greatly appreciated.

  Thank you.

  Here's what I did to make it work:

  I went into Control Panel and set up automatic updates to "download updates for me, but let me choose when to install them."

  A few days/weeks later, put automatic told me there are updates downloaded, so I chose
  "Custom" install rather "Express". Then I saw there was an update of cumulative security for IE8 (kb2817183). I stopped automatic updates install it by unchecking the checkbox. Based on other threads, I know to get my impression of html to work, I need to install the version of patch (which is not the version of GDR) of the KB2817183.

  It may be a good idea to create a restore at this stage point.

  Now, to find the KB2817183 files that have been downloaded but not installed during automatic updates:

  In my computer, I searched KB2817183 and found the following:

  C:\WINDOWS\SoftwareDistribution\Download\5dd0b02c82ca92ea3c2da6ad75887354\update\KB2817183-IE8.cat

  In that same folder, I found:

  C:\WINDOWS\SoftwareDistribution\Download\5dd0b02c82ca92ea3c2da6ad75887354\update\update.exe (this file is important so that this works.)

  I went to start, then run..., then type

  C:\WINDOWS\SoftwareDistribution\Download\5dd0b02c82ca92ea3c2da6ad75887354\update\update.exe b:SP3QFE

  and click OK.

  The installation of Software Distribution program ran, and I followed the instructions.

  In the end, the Setup program tried to restart, so I stopped and turned on the computer.

  My html emails now print correctly. Yay!

• Error message: the software can be installed by using the command "run under...". ».

  I have amtrying to load the HP Photosmart D71000 series. Keep is error message: the software can be installed by using the command "run under...". ». Advice suggests logon as a user with administrator privileges. This was done and same message came.  Why?

  Try right click on the setup.exe > run as admin.

  If this does not work, try the Vista Hardware and drivers Forum:

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot perform the specified command when I try to install the synaptic touchpad driver

  My led pen touchpad on my net book of HP compaq 2710p has stopped working. I downloaded the latest version of the HP driver, but when I try to install it I get the message "synaptic touchpad driver v13.2.6.2 could not execute the specified command line.

  A question for HP support, or their forums

• Windows 7 requires using the "CHANGE USER" command to install Server Terminal Services (remote desktop) programs?

  It is necessary (or even possible) to use the CHANGE USER/install and CHANGE USER/execute commands to install a program in a Terminal Server (RDP) Services environment so that it is available to other users via RDP?

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

  I hope this helps.