the code requires

Similar Questions

• What is the code for looping a clip backwards?

  I would loop a front clip and back by clicking a button front or rear.  I found the script code 3 following actions on Adobe, but the code that plays the mc in the opposite direction is not triggered by a button.  Can someone find me the code requiring the user to hit the reverse button for a mc backwards in a loop?

  Here is the code to play forward:

  function playAnimation(event:MouseEvent):void
  {
  star_mc. Play();
  }
  Save the function as an auditor with the key.
  startButton.addEventListener (MouseEvent.CLICK, playAnimation);

  ________________

  Here's the code that automatically plays the mc in reverse but that is not triggered by a button in the code above:

  This function is called when the enterFrame event is triggered, which means
  It is called once per frame.
  function everyFrame(event:Event):void
  {
  If (star_mc.currentFrame == 1)
  {
  star_mc.gotoAndStop (star_mc.totalFrames);
  }
  on the other
  {
  star_mc.prevFrame ();
  }
  }
  star_mc.addEventListener (Event.ENTER_FRAME, everyFrame);

  
  

  I need code that will play before in a loop and play backwards in a loop and triggered by the buttons.  Please help...  Thank you

  Apart from the function that performs the actual reading reverse, you need a button that tell the movieClip to run the "reverse code" each update of the framework.

  Suppose you have a button named reverseButton. When you click on it, copy the following code calls the function 'playAnimation', which tells the movieClip with instancename star_mc to run the code you already have.

  function playAnimation(event:MouseEvent):void
  {
  star_mc.addEventListener (Event.ENTER_FRAME, everyFrame);
  }
  Save the function as an auditor with the key.
  reverseButton.addEventListener (MouseEvent.CLICK, playAnimation);

• What is the code name for intex fx cloud (required to manually build 2.0)

  I want to manually build the last B2G for an intex phone fx cloud. The build process requires executing the script "config.sh' with the name of the phone code:
  https://developer.Mozilla.org/en-us/Firefox_OS/Preparing_for_your_first_B2G_build#Configuring_the_B2G_build_for_a_mobile_device

  The phones operating system supported firefox page does not display the code name for new devices:
  https://developer.Mozilla.org/en-us/Firefox_OS/Developer_phone_guide/Phone_specs

  Is it possible to get the code for intex phone name. If the list of the devices supported by "config.sh" does not include the code name of intex, is there a way to still be able to build the latest os from firefox for the intex device?

  Hi Notalex,

  The code name for the Intex Cloud FX device is Tarako. However, it uses another optimized codebase that the regular B2G is based so that it can run on lower range with little memory devices.

  Unfortunately, version 2.0 of the B2G code base would go not on the Fx cloud Intex due to material limitations.

  For more information and advanced issues on customizing your Firefox OS device, you can visit the following pages:

  • Tarako Wiki device
  • #B2G on IRC channels

  I hope you find this information useful. Please let us know if you have any questions of usability with your new Firefox OS device.

  Thank you!! =)

  -Ralph

• I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

  My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

  Is anyone know how can I access my hard drive again?

  Thank you

  Hello

  You has made changes to the system before the error appearing?  Cancel the changes.

  (1) in Device Manager > right click on the driver, and then select uninstall

  Reboot and Windows will reload the driver

  (2) remove the upper & lower filters that cause errors in Code 31

  http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

  Access the manufacturer's Web site and search for updated driver

• Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title - USB - IF xHCI USB Host Controller

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

  Hello

  USB devices remove all you can - restart the computer - is still there, the error? If it isn't
  It is related to one of the add-in devices that you removed. If she is still there, then, the question is
  either a device internal who can not remove or physically with the USB bus itself.
  If it was not there, add devices at a time until it is displayed - keep in mind that it is
  possible that there are two (or more) devices in conflict over the issue. Once you
  identified the check of the aircraft with the help of the manufacturer.

  1. to find the control panel - device - device - right-click on it - uninstall - Manager then
  Restart the computer to see if it clears.

  2. same place - double click on the device - driver tab - driver update - to see if that helps.

  3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
  online documentation and drivers, diagnostics and ask questions in their forums on all known
  questions. Update the Bios and chipset or other USB drivers.

  =====================================

  If necessary, we will use these additional troubleshooting methods:

  How to fix Code 31 errors
  http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Create process failed; code 740 the requested code requires an elevation trying to download the latest version of Any Video Converter

  While I was trying to download the latest version of Any Video Converter I got the message: create process failed; code 740; the requested code requires a rise.  What does that mean and what should I do to be able to download this program?

  Hello

  (1) have you made changes before the start of this issue?

  (2) what website you are trying to download from?

  (3) when exactly you get the error message? While trying to download or install?

  (4) what browser do you use?

  (5) can you download and install other applications/programs successfully?

  Create process Failed: Code 740 is an error which is caused by Windows being unable to load the permissions that your computer needs to function correctly.

  Try disabling the user account control:

  Enable or disable the User Account Control

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-user-account-control-on-or-off

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  Let us know if that helps.

• My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello

  Have you tried to update the drivers as suggested by Basith M?
  
  Method 1:
  You can run the fix provided in the link and check out them.
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/GP/hardware_device_problems

  
  Method 2:
  You can also try the procedure described in the link to troubleshoot driver issues.
  Tips for solving common driver problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems
  
  See also the proposal contained in the link and check.
  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/kb/932520/en-us

• This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

  This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

  Jake

  Hey Jake,

  Follow these methods.

  Method 1: Follow these steps:

  (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

  (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

  (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

  Remove or reconfigure newly installed unit.

  Restore a version prior to updating the driver.

  Use system restore to undo the Device Manager recent related changes.

  http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

  (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Update the latest graphic drivers.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

• Norton 360 diagnosis reported: Microsoft ISATAP Adapter #2 is malfunctioning and windows cannot load the drivers required - code 31.

  Original title: ISATAP adapt #2 does not properly. How can I solve this problem?

  My Norton 360 diagnostic report detected a hardware device unusable.  The device type is: Microsoft ISATAP Adapter #2 and the device situation mentions that it is working properly and windows cannot load the drivers required - code 31.

  I think that it is also affecting my internet connection and disrupt its speed.

  Can you please help with this question?

  Thank you very much
  Tony

  Hi Tony,.

  You can try reinstalling the device driver and check if it works.
  Uninstall and reinstall the device in Device Manager.
  a. Click Start, type devmgmt.msc and press to enter.
  b. Locate the Microsoft ISATAP Adapter device
  c. right-click on the device and select uninstall
  d. restart the computer and check.

  You can also consult the following article:

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
  http://support.Microsoft.com/default.aspx/KB/932520

  Hope this information is useful.

• Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Hello!

  I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

  "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

  When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

  Thank you!

  Hello

  You must get the drivers latset for m computer support site.

  Delete the "false: entry in Device Manager and install the new drivers."

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

  System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

  Thanx

  Hi rui2010,

   

  Place your machine in a clean boot State to see if another application is in conflict with the modem.

  If this fails, I recommend you reach out to the community Hauwei for assistance:

  http://Forum.Huawei.com/jive4/Forum.jspa?forumid=46&orderStr=9

   

  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

• Error: "Windows cannot verify the digital signature for the drivers required for this device (Code 52)"

  Original title: Wireless cannot verify the digital signature for the card driver from son - after an automatic update of the software.

  We downloaded an automatic update of our HP Pavilion laptop running Windows 7.  This disabled somehow the wireless network adapter.  Readings of the error; "Windows cannot verify the digital signature for the drivers required for this device.  A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or that might be malicious from an unknown source. (Code 52) ».  We tried 2 system restore - problem persisted.

  I solved this problem to roll back the driver to that before the driver that is currently installed.  The wireless activated immediately when done.

• Tool signature indicates that "no signature not required" and the code always displays warnings "Signature required".

  Well, it's confusing!

  I signed my application with the keys and "Ask" Signature tool button a dialog box indicating "no signature not required" and I can see the status of the mandatory and optional .cod, signing as "signed". But yet when I look at the code, the code of example database, it still shows the ugly warning

  "Signature required: RIM Runtime API (0 x 52525400)": protected class net.rim.device.api.database.Database ' "

  Am I missing something?

  I don't use the plugin Eclipse of JDE. CAP can be configured to generate warnings about the need for signing - they are indeed intended to remind you that you could use APIs that are restricted, but they have nothing to do with your code is not being signed. I wonder if these are the warnings you see differently but only returned by the JDE Eclipse plug-in. In JDE, there is a check box for enable/disable these warnings for various key - there must be a similar setting somewhere in the plugin Eclipse of JDE. I believe that by default, only warnings are disabled automatically if the Signature tool is registered to receive signatures with these keys.

• Whith USB Device error: "Windows cannot verify the digital signature for the drivers required for this device...". (Code 52) »

  Original title: open usb drivers problem

  My Dell laptop stops working with USB storage drivers. The removable driver icon is displayed in the devices window and printers with a yellow triangle around!
  I've tried different USB drivers and the problem persists. I tried troubleshooting, and it does not help.
  In the Properties window, I get the following message:

  "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) »

  I don't remember making any hardware/software changes and do not know how to solve the problem.

  You are welcome.

  Something seems not quite right so contact the store can be a good idea.

  Back to the initial problem as I understand it, is that when you insert an external drive, you get the error 'code 52?

• Get the error code 31 this device is not working properly because Windows cannot load the drivers required for this device.

  Original title: WAN miniport driver

  A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

  I use windows 8 in my sony vaio
  MODEL - SVE15123CNW

  Hi Praveen,

  Perform the steps suggested by Nirmal S from the link below and see if it helps.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/i-get-an-error-code-31-in-Device-Manager/3364d05a-af20-4f6d-8597-b4b9f6a74b60

  Answer please if you have any questions.