The coding of multiple file - will not let me crop
Hi everyone-Just start the phase of compression of my project (s) video of dance.
During the addition of 70 + videos of Flash Video Encoder - I am able to do all the settings I want - except
be able to 'Crop' of 4 pixels high, at bottom and sides (deinterlacing always showed issues up and down).
It's fields are not active and doesn't let me to crop.
Is this something I am doing wrong, or have I missed a step on the way?
Please help us if you can!
Kind regards
Luke Wonderly
There is no problem of reading about the cropping, just crops as much as you need to remove the pesky black borders around the video, there is nothing worse then that when I look at online video content.
Tags: Adobe Animate
Similar Questions
-
The device independent Postscript file will not let me choose the format of paper or output options
I am trying to output separated PDFs from InDesign (Mac OS 10.8) CS6. My only output options are a laser printer that can actually produce 2 pages on a single document or a device independent postscript file for which all output options are grayed out.
I used to do all of this from a previous version of InDesign using the plugin Adobe PDF as the PPD, with Acrobat Pro has been installed, but I have the latest version of Acrobat Pro, and that no longer works.
(If you know ' why the PDF previously separated: the driver to press the company that prints our book was never able to determine its RIP settings to save me from this nonsense without end.)
You can get the PPD 9 Adobe InDesign CS6 optionally print but not sure it will work on Mac 10.8, follow the below steps and then check: -.
- Quit InDesign.
Navigate to/Applications/Adobe Indesign CS5/Presets /.
- In the Presets', folder create a file called PPDs (the name of the file is case-sensitive).
Control-click on the following link and choose Save link under download the Acrobat 9 PPD:
Place a copy of the PPD downloaded into the folder created in step 3.
-
I download upgrade assets 13, items 9, 2 files to download, after that 1 of the 2 loaded 2nd file will not download message indicates that the part of the Archives of photoshop 13 is missing. you need all parts in the same folder. What should do?
You can also try to download the demo version of the software through the page linked below and then use your current serial number to activate it.
Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html
-
App accidentally tampered with the Mail application resources file, will not be open.
I use a Macbook Air in 2015, I tried to clear up space on my disk hard when I moved the folder "Resource" in the Mail app package content to the trash. Realizing it was a mistake, I put it back where I found it only to find out that the app does not at all open (the icon looks like as shown). Is there something I can do?
Restore OS X using OS X Recovery.
As you have discovered, it is best not to delete system files.
-
I went into setting and then clicked on iCloud and clicked on change plan and it wont let me click the all done button to change my iCloud on the free parameter. Why is this?
Because once payment hovering around (the date of the credit card is usually charged) and the current month is finished, it will change.
-
This has just begun. When I close firefox it tells me that I am closing multiple tabs. and will not let me save them. the only option is to cancel or OK. When I say OK and restart Firefox all my tabs go :-( This happens every time now. I know how to recover my old tabs but whenever I close Firefox it always warns me that I'm closing multiple tabs.
Tanks for help getting Firefox working properly again
JimDo not use 'Clear history of Firefox closing' to clear the 'browsing history '.
- Tools > Options > Privacy: history: [X] clear history of Firefox closing > settings
- https://support.Mozilla.org/KB/clear+recent+history
Using the "Show my windows and tabs from last time" is a more reliable way to restore the session data.
- Tools > Options > general > startup: "When Firefox starts": "show my windows and tabs from last time '.
-
I'm trying to import my IE Favorites and have read the instructions, but the import button in the file in gray and will not let me import. Any ideas?
Try using the import option in the Bookmark Manager (also known as the name of the library)
- In Firefox, select the bookmarks menu, then "organize bookmarks" open library
- In the library, select "Import and backup" then "Import HTML.
- You should get I hope that the ability to import from Internet Explorer.
-
Satellite L850 - Win8.1 will not let me install the chipset drivers
Hello
After I've upgraded to pro 8.1 windows 64 bit 64-bit windows 8 (preinstalled), I thought that windows will not let me install the chipset drivers (downloaded from "toshiba site" for windows 8.1 pro 64-bit), but they stay with windows drivers installed for them.
The Device Manager displays all installed and properly using. In addition, during the implementation was executed to install the chipset driver, he skipped most of them, to install a missing driver only (unfortunately have not kept any screen to show). I tried to install using the Device Manager (automatic search or manually navigating the computer files downloaded from the site), but it keeps saying that the drivers are up-to-date (drivers with the version from 2006, when later seen on the site are 2014). Any suggestion what to do?Model name: Satellite L850-1MK
Version of the operating system: Microsoft Windows 8.1 Pro 6.3.9600
CPU: Intel (r) Core i7-3630QM cpu @ 2.4 GHz
GPU: AMD Radeon HD 7600MHey... good news.
Thanks for the comments. -
The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
The version of this file is not compatible with the version of Windows that you are running.
I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
Maybe nobody knows what could be the problem?Hi Hal K,
Thank you for visiting Microsoft Answers.
If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.
If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.
You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows
http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions
Swati K - Microsoft support technician
Visit our Microsoft answers feedback Forum and let us know what you think. -
I have adobe Premiere elements 13. It will not let me delete audio or do fade in or out. I can move the yellow to the bottom line until the volume reads - 0.0, but the noise is still there during playback. I can click on fade in and fade out and the yellow line that chart volume takes a strong recovery or dip at the beginning or at the end of the clip, but there is no change in volume when I play back. What I am doing wrong?
Rickey
Thanks for the follow-up report.
Just a lit bulb. Maybe the answer, maybe a spleen.
Look carefully at the audio track of the timeline in the vicinity of title of the file.
The title of your file audio timeline shows: level of Volume or something else. If something else, click the tiny triangle where
the red arrow in the screen shot is sharp and select the Volume and then level so that you end up with
Volume: level as shown in the screenshot.
Hope it's the factor involved.
RTA
-
I had this problem before on sites Web of VA. How Firefox can not trust a site from the U.S. Government? It indicates that the connection is not approved and will not let me continue. How can I make Firefox let me continue?
This page opens another page in a frame.
In such a case, you cannot make an exception.This server does not send a certificate chain that ends with a built-in root certificate.
You can open this page in a tab to make it possible to create an exception if you really need access to the site.
Note that storing a permanent exception should not be.Open the chrome URI by pasting or typing this URI in the address bar to open the window "Add the Security Exception" and to check the certificate:
- chrome://pippki/content/exceptionDialog.XUL
In the field location type and paste the URL of the Web site
- retrieve the certificate via the button 'Get certificate '.
- inspect the certificate via the "view..." button. »
-
I use iMessage to the text of my Macbook. For some reason, it will not let me send a text message to a particular group (everyone has iMessage/iPhones) to my computer, but works well on my iPhone. All messages always appear on my Macbook iMessage, but when I click in the conversation, no text box for me to write as he does with everyone. It's driving me crazy. How should I do? The two contacts are in my address book and identified on my computer but I can't their message from my computer and have to keep spending on my phone to text their return. Their new messages are always also highlighted on my computer. In the photo I've included, you can see there is no text box for the text of the group with "Franny, dad."
Thanks for any help!
What happens if you start a new conversation with Franny & Dad from the IOW computer do not try to "catch" the conversation
Click on new message and put their names in there
If this does not work - remove the wire from the Mac and try again
-
hardware device
my wireless network is displayed with a cross and will not let me connect saying settings for this network do not match the requirements of the networs and it is a hidden network how to make it visible again :(Hello
What operating system installed on the computer?
Note: Look for errors in the network card device manager.
Method 1: Follow the article mentioned below, if you are using Windows 7 operating system.
Using the troubleshooter from network in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7
Method 2:
He looks at the IP address and other parameters are not set correctly, I suggest you contact your Internet service provider or provider router wireless to help on this.
For more information, follow the below mentioned article:
Set up a wireless router:
http://Windows.Microsoft.com/en-us/Windows7/set-up-a-wireless-router
Follow the below mentioned articles and see if they help you:
Set up a wireless network:
http://Windows.Microsoft.com/en-us/Windows7/setting-up-a-wireless-network
Wi - Fi and in Windows network connection issues:
Wireless network card: frequently asked questions:
http://Windows.Microsoft.com/en-us/Windows7/wireless-networking-frequently-asked-questions
-
Quick question: I need to change the drive to a new drive letter, but XP will not let me because he thinks that the letter is in use, when it is not.
The question for a long time: I've updated two disks in my computer from 1 TB to 2 TB. They were e and K:. The KC: drive is used as a backup of data on E: drive.
I copied all the data on the old drive E: to the new, but when I put the new drive in place of the old, XP wouldn't let me assign the E: drive letter. It is ironic that several times, I see the warning that if you change a drive letter, some programs may not work - so of course that Microsoft is aware of this problem - however, it is annoying when you NEED to change a drive letter to OPERATE programs, but Windows won't let you. Sometimes, trying to protect users from doing stupid things prevents them from making things work...
Anyway, after some research, I discovered that if I put the drive E: OLD and "remove" the drive of her letter, then the letter E: becomes available again. It did not work, and my computer is now partially satisfied with his new E: drive. However, the same trick with the new drive K: does NOT work.
I removed the letter 'k': the old K: drive, but when I install a new one, it won't let me change it. It happens to be stuck at 'l': it's no use to me because backup programs are ready to use the K:\ path.
There is that no "K:" drive in my computer and I deleted the letter k: the old disk. How do I FORCE XP to designate the new drive K: so that my backup program can work again?
Thank you.
Did you try to start your computer in Mode without fail (repeatedly, key to tap the F8 as your computer starts) and then try to re-assignment of drive letters?
I think that some programs on your machine may be playing with your drive letters. Boot safe mode will allow Windows to operate with a minimum of processes that are running and you should be able to change drive letters in these conditions.HTH,
JW -
I have a message from the Panda to (MS11-099) vulnerability that will not let me so far Windows. Whenever I try to update, I get a message that says; "The site has encountered a problem and cannot display the page you are trying to view.
You might have the question that you don't have the latest service pack. Follow the steps on:
Maybe you are looking for
-
I have a strange problem. I have a Logitech M305 mouse on another machine which is too slow scrolling on Web pages. I ordered a new mouse, but today I noticed the old mouse normally scroll in text documents, even though the text document is displayed
-
Satellite M100-165 cannot stop - lights up immediately
Hi all! Here's my problem: whenever I have shutdown or Hibernate my Satellite M100-165, it will light within 5 seconds. Standby does not either - instead of normal going in standby mode (power LED turn orange) it shuts down completely and has the for
-
Battery drops from 80% to 0%
Hello I am facing a daily problem with my Moto X play. the battery drains too fast and often fall of + - 60% to 0% instantly. I tried several solutions, but the problem was not resolved: -Disable the Wifi/bluetooth search location -Reset -Empty the c
-
When we export a finished video of first, random lines sometimes appear in the individual frames.It seems to happen only on a Mac Pro (we have several hung on the same server), but it is unpredictable when it will occur. I exported the same project w
-
Hi allI'm new to the DAC. I have a new domain with tasks for the new fact and dimension tables custom. NowI have to add this new already existing domain of the execution plan that allows to launch at full load.My question is when I add this new plan