The command update

Similar Questions

• Command update the esxi update 5.1 to 5.1 2 via SSH

  Could someone send me the command update ESXi 5.1 5.1U2? (assuming I already downloaded and copied the update to the host)

  I know it's something like esxcli the software profile install d [something, something, etc.], but I think that I've got the syntax.

  THX!

  VMware KB: Installation of patches on an ESXi host from the command-line 5.x

  1. Download the update and transfer it to any store of data that is available for the ESXi host
  2. Connect to the host via SSH ESXi
  3. Put the ESXi host in maintenance mode.

  # vim - cmd hostsvc/maintenance_mode_enter

  4. go to the directory on the data store where the patch file was transferred to and verify that the file exists:

  # cdvmfs/volumes/Datastore/DirectoryName
  # ls

  Verify that you can see the file that you downloaded. I guess that the file you downloaded is in zip format. In this case,.

  5 # software esxcli vib install d ' "/vmfs/volumes/Datastore/DirectoryName/PatchName.zip".

  More options are in VMware KB. Please see that as well.

  See you soon.

• Can't get the lines updated in IFL type3?

  Hello

  I'm implementing the CPC type3.

  To do this, I used the updated incremental sql ikm & oracle ckm.

  I opened ikm & duplicate the command update of existing lines. I changed the query.  and

  target also source mapping to the table, I changed the keys ud. I HAV eupdated smith Sani 800 to 30000 after execution, I had the current value of sal & I have no previous data salary.

  Thanks to this link, I'm impleneting IFL 3

  http://www.odigurus.com/2012/01/SCD-type-3.html

  SCD Type3 in team ODIDW

  again, I have no previous data.

  Please help me.

  Thanks in advance,

  a.Kavya

  

  

  

  

  

  

  You can simulate the code (if you have this option in the 11g version) OR run the task and the operator to control and check what is the INSERT/UPDATE request, it generates at run time?

  Run the query even in your DB to check the issue...

• The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  The use of the battery has increased since the update to ios 10. Also, why can not disable the voice command. It's the most boring on the new update.

  Depending on what you mean by "voice command", either:

  Settings / general / accessibility / VoiceOver / OFF, or

  Settings / Siri / OFF

  As for your use of the battery, you can check what app pulls most of its use in the settings / battery.  A new version of the app is sometimes problematic, not necessarily iOS or iPhone.  If you see a unusual % of use of a particular application, or force-to leave it removal/reinstalling it or remove it until an update comes.  If anything seems unusual, it might be a problematic installation of iOS, in which case, you could backup your iPhone and restore it:

  Restore your iPhone, iPad or iPod touch from a backup - Apple Support

• I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  I can not use the command share in safari, mail, notes, etc. since I updated to El Capitan (10.11.5). No way to solve it. Please help me.

  There is a problem with your installation of OS X. The easiest way, but not the fastest way to fix it is to reinstall the operating system. Unless you are in a hurry or have measured access to the network, it is what I suggest, especially since I don't know if there are any problems with the installation. Please backup all data before reinstalling. You won't need the backup unless something is wrong.

  The below, advanced shortcut if it works, can save you some downtime (and the cost of a download of several gigabyte, if necessary.)

  1 back up all data.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags -R norestricted /V*/*/S*/*/Caches

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo /usr/libexec/xpchelper --rebuild-cache

  Paste in a Terminal as before. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and repeat this step. You don't have to repeat the previous steps.

  Wait for a new line ending with a dollar sign ($) below what you entered.

  10. make as in step 9 with this line:

  sudo /usr/libexec/*/app_sandbox_cache_builder --rebuild-cache

  You can then quit Terminal.

• 10.11.4 update has failed because of the command line tools

  The 10.11.4 update fails with a message on the command line tools.

  I found this in system.log.

  Memento kernel [0]: sandbox: softwareupdated (329) deny system (1) - 682f fsctl

  181Mb Command Line Tool for Xcode 7.3 keeps reappearing in the section "updates" from the App Store, 10.11.4, as well as the global update apparently cannot continue.

  Normally, you should be able to select the updates separately (click on "More... »). If this does not work for some reason, you can download the 10.11.4 update by itself: download OS X El Capitan 10.11.4 updated

  (Combo version: Download OS X El Capitan 10.11.4 Combo Update)

• Update Live from the command prompt

  Hello

  I create an executable whose purpose and to make the creation of a winPE bootable USB key easier.

  To create the key, I need to run multiple commands with the systemexec.vi. Many of these commands take ages at the end so I need to know whether or not the command is still in progress.

  What would be great is to have a live update from the command prompt. I guess there should be a way to insert the command line in a secondary or other container?

  

  Best regards

  Try to redirect the standard output to a file, as in this example:

  ping 192.168.0.46 > out.txt

  If your utility supports redirection, you can read the contents of the file at any time.

  Be careful to choose a working directory where your username has write permissions.

• How install Flash Player via the command line using sudo to install without being invited for the dialog "Preferences updated Flash Player"? Is there a really quiet option, no prompt?

  Since the administration guide, I execute the following commands on a remote host to install flash player. However, the command stalls waiting for "Update Flash Player Preferences" dialog box to decide. I would like to run this command on a remote host and have to install without any warning. Are the other arguments to the "'Adobe Flash Player install Manager" another that '-install ', something that is really quiet? "
  

  
  

  Silent installation of Flash Player (using Installer .app bundle)

  To silently install the Flash Player 11.3 or later on Mac, follow these steps:

  1 extract the bundle to install Adobe Flash Player (install Adobe Flash Player.app) of the. DMG file.

  2 open a terminal window and change to the directory where the .app file is saved.

  For example, if the .app file is saved to the desktop of the current user, type:

  CD ~/Desktop

  3. run the installation program contained in the .app file using the following command:

  sudo. / Install Adobe Flash Player.app/Contents/MacOS/Adobe Flash Player install Manager.

  install

  4. type the password to continue the installation.

  
  

  Thank you.

  Hello

  You experience this behavior because you use the installer online, download and install Flash Player silently in background, but requires also the user to provide the option to update.  Setup Online is not intended for the distribution of the company.  Distribute Flash Player within your organization, you will need Flash Player (usually free) licenses for distribution.  Apply for a license, go to Adobe Flash Player Distribution. Adobe and complete and submit the form.  After application, you will receive an email with a link to download installers for the distribution of the company.  This includes installers .app both .pkg you can use.  None of these prompts to update the options during installation in silent mode.

  I apologize for not noticing this before, however, I assume that you did not use the installer online since you were distributing Flash Player within your organization.

  --

  Maria

• Updated the last updated Aug.5 2016 and be over three quarter turn, I want to start in safe mode, all responses.

  Update will not finish, want to start in safe mode, please help.  It's updated Aug.5 2016.

  Start in Safe Mode. What do you expect to make? You must do this:

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume of the list to one side.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

• my habit of portable full process of start-up ever since I made the last update to El Capitan, gets hung up on where the Office should appear.  Behavior strange screen turns off then flashes every 8 seconds or so still visible status bar

  When this happens, you can also see a white spinning dial when the screen is flashing.  But the Bureau just never came up.  Tried the disk first aid in safemode, LANDAU of compensation running.  Now I can't even on it to open it in safe mode.   I also tried to install a new copy of El Capitan in safemode, but she got too successful for the download.   I have a macbook pro mid-2012 can't remember the speed of the processor, 16 MB of RAM.

  I suggest the following:

  Try each of them in order. A test to see if the computer works properly:

  1. Reset the PRAM
  2. Reset the controller (SMC) system management
  3. Start the computer in Safe Mode, and then restart normally. It's slower than a standard home.
  4. Repair the disk by booting to the HD recovery immediately after that the chime press the command and R keys until the Utility Menu appears. Choose disk utility and click on the continue button. Select the withdrawal (usually Macintosh HD) volume entry in the list to one side.  Click first aid button in the toolbar. Wait the fact button appear. Disk utility and return in the Utility Menu. Restart the computer from the Apple Menu.
  5. Reinstall OS X by booting from the Recovery HD using the command and R keys. When the Utility Menu appears, select reinstall OS X and then click on the continue button.
  6. Download and install the update of OS X El Capitan 10.11.6 Combo

• How to get rid of extra bar that comes with the new update?

  I'm a big fan of Mozilla and have used FireFox for many years. The new update messed up the way I had my browser, but I found an addon which allow me to move things where I wanted them once more. There is one thing that I could not fix well - the empty bar under tabs that extend horizontally over the entire screen. I unchecked toolbar bookmarks, addon bar tools and additional toolbar, but that bar it won't go away.

  I completely understand the need for the redesign of the user interface and do not complain.

  I have uploaded an image here.

  http://imgur.com/h0f9NRE

  As you can see, I like the minimalist look and this bar is trampling on this look. Once more I complain on the new UI, but this bar will be removable in a future update?

  Is not an additional bar; This is the navigation bar which has always been there.

  1. Open the modules (Ctrl + Shift + A Manager; Mac: Command + shift + A), then the Extensions category.
  2. Next to Restorer of classic theme, click the Options button.
  3. On the main tab, under general UI, check "hide navigation bar.

• "file > create new version" missing in the latest update to iTunes

  I used to use the Menu command file > create new version to convert the movies so that they will play on my 1st gen iPad. (The fact that he made them smaller was an added bonus).

  This function seems to be missing or moved in the last update. In its place is a Spartan function convert . If you hold down the option key, you can select «Convert to AAC...» ' which is useful in its own way, but what I'm looking for.

  Does anyone have an idea where the conversion of film went?

  Apple dropped this feature in the last update, because they think classic iPod is obsolete. But you can use the Handbrake or Apple Compressor to do the same job and then mark the files using MetaX or MetaZ, works for my 8th generation iPod classic.

• Since the software update, nothing works

  Hello

  I recently upgraded my Macbook to the last update of software and since its installation, nothing seems to work.

  All my documents that has been produced on the pages opens is no longer...

  None of my PDF files open in adobe even after uninstalling and reinstalling adobe...

  Not what I expect for any expenditure £1600 on a laptop...

  Any help will be greatly appreciated, thank you.

  Please launch the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  The title of the Console window should be all Messages. If it isn't, select

  SYSTEM LOG QUERIES ▹ all Messages

  in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu at the top of the screen bar.

  Click on the clear view icon in the toolbar. Then take an action that does not work the way you expect. Select all of the lines that appear in the Console window. Copy to the Clipboard by pressing Control-C key combination. Paste into a reply to this message by pressing command + V.

  The journal contains a large amount of information, almost everything that is not relevant to solve a particular problem. When you post a journal excerpt, be selective. A few dozen lines are almost always more than enough.

  Please don't dump blindly thousands of lines in the journal in this discussion.

  Please do not post screenshots of log messages - text poster.

  Some private information, such as your name or e-mail address, can appear in the log. Anonymize before posting.

  When you post the journal excerpt, an error message may appear on the web page: "you include content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• No standby on MacPro after you install the security update

  10.10.5 Yosemite system

  MacPro early 2009 (4.1)

  2015 security-006 installed by download file update

  Problem now:

  No Sleep Mode more via

  -Button at the login screen

  -Apple menu

  -Parameters in the Pref Pane

  -Shortcut

  This is what happens:

  Screen goes to sleep but

  -fans are always

  -HDs turn

  -Boot HD work sounds

  -small power light is not 'breathing '.

  What I've done so far:

  Resets do

  -Energy records Standard parameters

  -MSC

  NVRAM EXTRA

  Started in Mode safe

  Tested on a fresh user account

  Repaired access rights

  Results: No "standby"

  Secuity update version before was 2015-003 or 004.

  Sleep Mode worked without problem.

  I took the same file to update two iMacs (2009), an iMac (2014) and a MacBook Pro (2011) - no problem.

  Suggestions for Restore Mode features Eve for the MacPro would be great.

  Thank you

  Wipe the drive and reinstall OS X properly:

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer and after the buzzer, press on and hold down the COMMAND and R until the menu screen appears.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• ZV5000 - want to get the BIOS update but do not have Windows

  Hello

  just got my trusty zv5000 AMD out of the closet and intend to play with Linux on it.  At the moment there no bone because the HD has not, although I noticed that the BIOS is a former F.21 and would get to you last F.35.    Unfortunately, it seems that I can only do the update of the BIOS if I am running Windows.

  Wondering if there is a bootable ISO or floppy image available that I can use to do the update.  I prefer not to have to locate a copy of Windows, install on a new HD just to update the BIOS.

  Thanks for any help on this

  -Paul

  -Pavilion zv5000 AMD64

  HP OfficeJet 6000 E609n | Windows 7 64 bit

  Thank you, I finally understood how to do the BIOS update without installing Windows:

  • Copy the executable update BIOS for USB
  • Connect a portable flash drive
  • Power laptop and Windows 7 install cd boot
  • go into the Windows Recovery Tools command prompt
  • change directory to the USB player
  • Run the executable file
  • Utility to update the BIOS works well
  Thanks again for your response.