the computer clock does not refresh automatically

Similar Questions

• Cannot join Homegroup because the computer clock does not match normal time

  I have both windows 7 Home premium, a HP and a Compaq laptops. I can create a homegroup on either, but when opening homegroup on the other page he says that no residential groups exist on the network. The two laptops see each other in exploring it. During troubleshooting, the only error is "synchronize the clock of your computer with your local time. Option is provided to apply the hotfix. When you click to apply the hotfix, it fails with the message "the system time differs from your local time. Times are visibly identical. The time on the router is also exactly two laptops. What standard time windows compares to and how do I make them match?

  I suspect that the most likely cause would be the two laptops are on different time zones.  Check the time zone in a right click on the clock in the taskbar and selecting "change date and time.  In this dialog box will have an option to set the time zone.

• On the computer, it does not load XP but goes to the XP start and says: NVRD32.sys file not found

  On start-up the computer, it does not load XP but goes to starting XP, and says NVRD32.sys file not found. I have to go up to xp home line manually and it load. How to fix the problem, so he starts xp automatically without entering start xp
  Thank you

  Posing for the PC model, you show that you do not know the answer, it was a software problem, but you're right, it's a Dell.
  In any case, I found the answer elsewhere, must with the boot.ini file on XP

• When I turn on the computer, it does not show my office. It comes up with a white screen

  Original title: bad start.

  On May 15, 2013, I was prompted to download 8 updates from Microsoft. Since then when I turn on the computer, it does not show my office. It comes with a white screen. The only way to see the desktop is at the stop 'wrong' to turn off the power to the computer. Then I reboot, it just asking if I want to boot up normally, I say Yes and all is well on the office. Seems related to downloads of May 15, 2013. Any ideas?

  Hello

  Method 1:

  I suggest you to select last known good Configuration in Windows Advanced options and check if it works.

  To do this:

  a. restart the computer and press the F8 key for about four to five times.

  b. you will see the that last known good Configuration in the Advanced Windows options.

  c. Select last known good Configuration and press enter.

  Method 2:

  See the article and check if that helps:

  What to do if Windows does not start correctly

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly

  For more protection, use System Restore backup and restore, which is designed to help save email, photos, documents and other personal files.

  Note: when checking your drive hard for errors, if bad sectors are found, it tries to repair this sector and if all the available data may be lost.

  Let us know if it helps.

• CD/DVD is recognized by the computer, but does not

  My CD/DVD is recognized by the computer, but does not... tried fix it did not help

  My CD/DVD drive has stopped working.  My computer recognizes the drive but when I put a disk in it cannot read.  I tried multiple disks, but nothing will work.  I tried microsoft fixit, but it does not work.  He said that the media cd/DVD drive is not readable.  Help, please.

  Is that your CD/DVD drive is older than 1 year?  Then, the drive may be defective, with a faulty lens.

  I don't think that any form of manual registry change or fix tool will work in the situation.
  S.Chatterjee

• HP pavilion g6-1016ex the computer screen does not.

  HP pavilion g6-1016ex the computer screen does not. but when I connect to the pc display by display moniter on-site port, pc display moniter works. How can recover from this problem... ?

  Have you tried pressing F4 or Fn + F4 to switch between the views?

  If it still does not work, the following document can help you identify the problem: display problems.

• Listener (and the database instance) does not start automatically: ORA-12514: TNS:listener does not currently of service requested in connect descriptor

  Hi all... I am a newbie with oracle database.,.

  I have the problem of monitoring:

  I installed Oracle Database 11 g R2 XE on my CentOS 6.5 guest operating system.

  I changed the host name in my CentOS so (where installed oracle 11g R2 XE) after the installation was completed successfully.

  Installation-) before and during the hostname is localhost.

  (-) After the installation, I changed the host name in VMCentOS

  From the moment where I changed the host name, nothing starts automatically. In particular, the listener and the database instance does not start automatically.

  When I start the listener manually and I try to connect to the instance of database with SQLPLUS I get this error:

  ORA-12514: TNS:listener is not currently of service requested in connect descriptor

  I think that the problem is due host name changed because I have to test and debug the object, re-installed a machine virtual operating system CentOS, re-installed oracle database 11 g and I do not have this problem. The database instance and the listener starts automatically!

  Can someone tell me if, maybe, the problem is with the host has changed? ... and why?

  P.S.: After changing the hostname I also modified the listener.ora and the tnsnames.ora by changing the HOST with the correct host name.

  Hello

  It seems that you don't install Oracle Database Express Edition (XE). If you post this question in the wrong forum.

  When you install EA or there is no script that starts the database at startup.

  If you wish, you can create by yourself. For example search for instructions to Google how to create script.

  Kind regards

  Jari

• The BIOS clock does not work after upgrade to Windows 7

  XW4300 workstation has been recently updated to Windows 7 from XP pro.  After the update, the system clock did not keep accurate time, then I entered the BIOS Setup and set the time here.  After several hours, I rebooted, entered the BIOS configuration and noticed clock BIOS had not changed.  I replaced the CMOS (CR2032) battery with three different batteries and BIOS clock does not always change.

  Occasionally, Windows 7 system clock will synchronize to the BIOS clock, which creates the incorrect time in Windows. I can see these events in the system event log.

  Is it possible that this problem is related to the Win 7 upgrade, or is it a problem without a report?  Suggestions to control or fix the BIOS clock beyond what has been done so far?  If I can't fix the BIOS clock, is it possible to prevent the synchronization of the clock in the BIOS Win 7?

  ERICO wrote:
  

  Replace the jumper CLRCMOS or CLRRTC to its original position after erasing the CMOS memory and flashed the BIOS? If you do not then the time will be reset whenever you turn off the PC.

  I have not found a CLRRTC jumper on the 4300.  Is there a jumper to reset the password (E49), and a CMOS reset button.

  However, I tried to reinstall the battery with power supply cable disconnected, and it reset the CMOS all anyway.  Reset the CMOS seems to have solved the problem.  BIOS clock has now begun to follow the exact time again.  I rebooted several times now, and the time is now correctly.

  Thank you all for your suggestions.

• the invocation service does not start automatically

  Hi, I set up call service starts automatically as below, however, it has not worked. And I need application code to get the service from CacheFactory.getService ("MyInvocationService") to start it... why it is so? Thank you.
  
  Henry
  
  < invocation-plan >
  < scheme name > example-invocation < / system-name >
  < service name > MyInvocationService < / service-name >
  < number > 10 threads < / thread count >
  < system-property autostart = "tangosol.coherence.invocation.autostart" > true < / autostart >
  < / invocation-plan >

  922963 wrote:
  Hi Robert,.

  Thank you. Yes, I have my own main class. In order to take advantage of the beginning and the monitor etc, already provided by DefaultCacheServer, my hand class should DefaultCacheServer? or a better way to do it?

  Henry

  Hi Henry,.

  Simply call DefaultCacheServer.start () which starts the services (but does not start the thread of analysis that restarts the services of consistency if the node was chased from the cluster automatically).

  If you want the thread of analysis, too, then, in my opinion, you can call DefaultCacheServer.startDaemon ().

  Stop the services and the thread of analysis is DefaultCacheServer.shutdown ().

  Best regards

  Robert

• Custom flash drives still work in XP slows down the computer and does not turn off. No drive letter & tried all solutions online.occassionally ok

  When computer for a while and plug in flash drive usb does not recognize the drive, the computer slows down, does not turn off. Even with all the flash drives I have, ok when computer on just. I tried all the solutions online, nothing helps.

  Looks like you might have some performance issues with the computer rather that readers flash... but first of all, I would like to try to take the flash drives to a friends and ensure that they are working very well... If they are I would look at the performance of the computer and health controls. Heres a guide to improving the performance and general peacekeeping home

• Why the computer restart does not appear

  Widows Vista Home premium, service Pack2

  32-bit operating system

  By performing the steps to boot as recommended by Microsoft for windos vista, not a single prompt automatically appears to restart the computer, I have to manually apply.

  Is this ok for the version of windows or of such a function should be fixed and how to fix it

  By clicking on this link and by running the downloaded file must reset the quick settings

  If it is still not perhaps that this is not in Vista

  Doesn't bother me, restart the option he did the EXACT SAME thing with manual restart

• When you click "Restart now" after Windows Update, the computer stops, does not restart

  When you click "Restart now" to a windows update... the computer cycle throughout the judgment... and not restart.

  * original title - problems with computer restart (ing) after the updates *.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

• I just installed a 2nd ATA drive, now the computer (SR2150NX) does not recognize the CD drive.

  Computer Compaq SR2150NX Vista Home. Device Manager does not display the CD/DVD drive after installing a hard drive from second on the tablecloth that is also connected to the CD player. The new drive is seen fine. If I pull the power of the new drive and restart, the drive is visible again. The disc was a secondary drive in another computer, so it is set to be a slave. How can I get both work?

  It is perhaps as simple as changing the jumper on CS (Cable Select).

• Home page does not refresh automatically

  When a collection is added, it does not appear on the home page. Instead, you get a message saying «Update» aviable You really need to push this message, or drag the page down, to trigger the update.

  Why the page is not automatically updated with the new content?

  It feels like an unnecessary action for the player to trigger the update.

  

  Because we do not want the reader to lose their place. If you scroll to the bottom of the page go and we detect an update, apply this update could (in many cases) scroll you up, which is shocking. We followed the model of many other applications, such as Facebook, where we make an explicit user gesture so that the reader can decide when they want to have their position reset.

  Neil

• I use a Toshiba Windows 10 computer to manage my Itunes account.  I have an Iphone with IOS 9.2 6.  When I connect to Itunes and connect my phone to the computer, it does not appear in the list of devices.  Help?

  I have a 6 Iphone with IOS 9.2 and when I connect it to my computer Toshiba P75-A7200 with Windows 10 - and I connect to my Itunes account, my Iphone does not present as a listed device.

  Can someone help me?

  http://lmgtfy.com/?q=iPhone+not+recognized