The computer crashes: something to do with the minidump and sysdata.xml?

Similar Questions

• My computer has been infected recently with Sirefef (AB and W variants). How will I know if I do a backup/clean install of the operating system or not?

  As says the question: my computer has been infected recently with Sirefef (AB and W variants).  How will I know if I do a backup/clean install of the operating system or not?

  I'm running a full system scan in ESM right now, and it has detected multiple instances of sirefef.   I have remove as they pop up, but I'm afraid that when I run another scan they all will always be there.  Is there a way to know if MSE is actually remove them and he cleaning?  If not, should I do a back up and reinstall the OS?

  Thank you.  I can choose to try this, however, I would like an answer to my other questions first.

  Sirefef is a rootkit and yes he can hide in your system.  This is why it has been suggested that you may need to reformat/reinstall.  In fact, it's the only way to eliminate malware.  Multiple scans with several scanners and no conclusion malware probably indicate he disappeared, but the key word is "probably".  Malwarebytes is good and what he finds now may be traces of the infection, but what he finds perhaps not active more - it is always good to run the scans so.

  What spare drive did you run?  What scanners did you use?  See again you and follow the guide "Malwaretips"?

  For the firewall problem, you can try the following Microsoft Fixit.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  One of the users of the Forum answers maintains that a great guide on information security is important for understanding the removal of malicious software.  See the following compliments of Brian M - for suggestions on how to solve your problem: http://www.selectrealsecurity.com/malware-removal-guide/#after see: after the removal process and solve the problems of Post disinfection

  Uninstall/reinstall of MSE is how?  All the problems?  Have you tested MSE with eicar to be sure it's working?

  Assume that you have not had an opportunity to review the MSE Installation Checklist or you would have noted that MSE and Windows Defender cannot be used on the same computer.  So if WD works in fact it means MSE has been disabled/not not work correctly or not installed.

  See the next WD re: Windows Defender and Microsoft Security Essentials

  Good luck...

• Computer crashes after attempting to copy in Excel and IE

  I hope this is the right forum, sorry if not.

  Try to copy, copy and paste something, my computer crashes. If I'm in excell it crashes if I'm in the Explorer, to stop and restart. It could just be a phrase, size is not serious...

  any thoughts?

  It is an Internet Explorer error, not Windows Explorer, caused by Skype.
  If you are looking for a mistake explore?
   
  In Internet Explorer click on Tools button on the toolbar - Manage Addons - Enable
  or disable Addons and find Slype in the list and choose disable. This
  Remove Skype toolbars and aid of IE.
   
  First test IE without any addins loaded: start - programs -.
  Accessories - Tools system - Internet Explorer (no Addons).
   
  Another thing to try is to start Excel in safe mode (without addins loaded). Type in
  Start - All Programs - Accessories - run and type
   
  Excel/s
   
  Download http://www.nirsoft.net/utils/shexview.html
  Disable all non-microsoft shell extensions (to explore) and reactivate a
  by so this can help.
   
  --
  ..
  --
  "acetoolguy" wrote in message news: e155b614-a948-4e38-bb82-c5e0ca5ddd50...
  > Problem event name: BEX
  >
  > Application name: iexplore.exe
  >
  > Application version: 8.0.6001.18943
  >
  > Application timestamp: 4c25813d
  >
  > Fault Module name: SkypeIEPlugin.dll_unloaded
  >
  > Fault Module Version: 0.0.0.0
  >
  > Module Timestamp error: 4a77e4da
  >
  > The exception offset: 06fa3f2b
  >
  > Exception code: c0000005
  >
  > Exception data: 00000008
  >
  > OS Version: 6.0.6002.2.2.0.768.3
  >
  > Locale ID: 1033
  >
  > Additional information about the problem
  >
  > Bucket ID: 1309165866
  >
  >
  >
  > Funny, copy/paste did work for it.
  >
   
   

• I received a phone call from a man by the name of Thomson. He said that I was risking to have my computer crash. My security proovider is AVG and they say my computers are save.

  Received phone call from a man named Thomson.  He said he was with Windows in the United States and Florida.   Was given the phone number of 315-506-4544.  Asking for help with problems with my computer detected by Windows.  He said that I was risking my computer and overwriting of files.  Very difficult to understand.  He asked I right click on my computer and highlight all the files with any questions.  I didn't trust this person so I hung up the phone.  I continued to return calls 4 - 5 times.  This doesn't seem to be a legitimate caller.  My security proovider is AVG and they say my computers are recording to date.  Was it a bogus scam

  Hello

  Its as SCAM!

  The number is either usurped or re-directec to another number or even another country.

  -506 (315) - 4544
  http://www.numberinvestigator.com/phone/315-506-4544.html

  Avoid scams to phone for tech support
  http://www.Microsoft.com/security/online-privacy/avoid-phone-scams.aspx

  In the United States, you can contact the FBI, Attorney general, the police authorities and consumer
  Watch groups. Arm yourself with knowledge.

  The Internet Crime Complaint Center (IC3) is a partnership between the Federal Bureau of Investigation
  (FBI) and the National White Collar Crime Center (NW3C), funded in part by the Bureau of Justice Assistance
  (BJA).
  http://www.ic3.gov/complaint/default.aspx

  No, Microsoft wouldn't you not solicited. Or they would know if errors exist on your
  computer. So that's the fraud or scams to get your money or worse to steal your identity.

  Avoid scams that use the Microsoft name fraudulently - Microsoft is not unsolicited
  phone calls to help you fix your computer
  http://www.Microsoft.com/protect/fraud/phishing/msName.aspx

  Scams and hoaxes
  http://support.Microsoft.com/contactus/cu_sc_virsec_master?ws=support#tab3

  Microsoft Support Center consumer
  https://consumersecuritysupport.Microsoft.com/default.aspx?altbrand=true&SD=GN&ln=en-us&St=1&wfxredirect=1&gssnb=1

  Microsoft technical support
  http://support.Microsoft.com/contactus/?ws=support#TAB0

  Microsoft - contact technical support
  http://Windows.Microsoft.com/en-us/Windows/help/contact-support

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Charged computer hard drive Gateway laptop with Windows 7 and installed in the Dell computer. Now it says Windows is a counterfeit

  my gateway labtop has been damaged so I removed the hard drive and installed in my dell requires a hard drive.  It worked great for about a month and now it tells me that I have a copy of windows conterifet.  When I bought the two all have windows 7 on them what make?  I can't afford to buy and I have not to?

  When you buy a computer with a copy preinstalled Windows 7, it's the OEM version is good ONLY for the system with the original motherboard.  If you remove the hard drive and move to another computer, Windows 7 license is not good and cannot be enabled.  Please don't shoot the Messenger!  :-)

  Good luck.

• Firefox 22 after update it crashes, something to do with java.

  It happens on any page.

  God bless you also joseavelar91.

• I have createive cloud. My computer crashed. "" I use Dreamweaver 5.5 and my computer States "Installer failed to initialize" how to download dreamweaver 5.5?

  Adobe gives me no support at all. They say that I can't get help through this forum. Who should I contact for support? I'm a small business operator now out of business! Help please

  If you have creative cloud, you download the creative application of cloud and you could install the latest CC 2015.

  Error: "cannot install initialize | Windows

  If you don't use creative cloud and try to install CS5.5 use this article:

  Resolution of error messages. CS5, CS5.5 bootstrapper

  I hope that one of them you download back in business.

• Problems with HTTPService timeout and large XML

  Hello world!
  In my Flex application I fill a datagrid from an HTTPService to results.
  
  It works fine, but there is a problem: If the servlet that generates the XML code takes too long to return, the HTTPService will throw this error:
  
  Error #1090: XML parser failure: element is incorrect.
  
  This error seems to be random because it happens on 15-20% of calls to the servlet. And the worst: no help not set requestTimeout 10000 or -1.
  
  Can you tell me what is happening? Thanks for any help!

  Solved!
  You must manually correct the XML returned by the server with this function:

  public static void parseXML (event: ResultEvent, parentTag: String): XML
  {
  var xml: String = event.result.toString ();
  var endTagIndex: int = xml.indexOf("");
  var endTagLength: int = new String("").length;
  XML = xml.substring (0, endTagIndex + endTagLength);
  return of new XML (xml);
  }

• my computer is connected to a new projector with a DVI and HDMI cable, and return the currency I installed correctly but I don't get a picture on the projector

  I connected my computer to a new projector with a DVI and HDMI cable, and return the currency I installed correctly but I don't get a picture of the projector, need HELP.

  Hi Bill,

  Thanks for asking this question to Microsoft Community.

  I will definitely help you to set up the projector, but before starting, I would ask you some troubleshooting questions.

  What version of the Windows operating system is installed on the computer? Do you get any error messages? Have you done a recent software or changes to the material on the computer?

  Here is a link that provides information on connecting to a projector. Go through it and check if it helps.

  Hope this information is useful and provide us with more information for further assistance. We will be happy to help you.

• There is a yellow triangle on top of my computer in the printers and devices window icon, does that mean?

  There is a yellow triangle on top of my computer icon in the printers and devices window, it says "Base system device driver in not installed".  I tried all the fixes and nothing has worked.  What is - this and I can remove it.  Has it something to do with my iphone and Hello which I get an error as well and can never settle.

  Hi Linette6491,

  yellow triangle indicates that you do have not all related drivers or program installed for you're printer, so log on to downlaod and the printer manufacturer's website and install the latest drivers

  You can also try the link below:

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Good luck

• Record of the request and response of OPA

  Hello
  
  I use OPA Siebel connector to call OPA 10.2 modules. Is there a way to connect the request and response Xmls side OPA.
  Curretly do I of Siebel end but I want to know if it is possible since the end of the OPA too and how?
  
  I'm also deploy my modules of Tomcat. If the request log is not possible takeover, can I do on Tomcat and how?
  
  Thank you
  JAS

  Hi Jas,

  These could help...

  The last two entries here:
  Re: OPA log levels

  and

  This thread:
  Re: Tomcat log for siebel-determinations-server file

  -Brandon

• After 20-30 minutes my computer crashes with a blue error screen and then reports an error on the desktop on restart, this happens when the desktop is idle or playing games, I get the below error

  Signature of the problem
  Problem event name: BlueScreen
  OS version: 6.0.6000.2.0.0.768.2
  Locale ID: 2057

  Files helping to describe the problem (some files may be is no longer available)
  Mini111709 - 01.dmp
  SysData. XML
  Version.txt

  See a temporary copy of these files
  WARNING: If a virus or other security threat caused the problem, open a copy of file can harm your computer.

  Additional information about the problem
  BCCode: 1000008e
  BCP1: C0000005
  BCP2: 81FA7519
  BCP3: 851D1F98
  BCP4: 00000000
  OS version: 6_0_6000
  Service Pack: 0_0
  Product: 768_1
  Information about the server: a64044ff-cd2c-4992-88b5-e4083f658b84

  Hello

  Two main causes of this blue screen video drivers and BIOS - check with system manufacturer site for
  View of the adapter (video) and BIOS, then on site of the manufacturer of the device for the last video. There may be other drivers
  in order to check there. DISABLE the auto-pilot plant as those who are older and if updates Windows suggests
  a pilot just HIDE. Antivirus is another possibility.

  See methods of update driver generic in the next message.

  BCCode: 8th 0x0000008E

  Cause

  Bug KERNEL_MODE_EXCEPTION_NOT_HANDLED control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates that a memory access violation has occurred.

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques:

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2 (the address of the exception) should identify the driver or function that caused the problem.

  If you do not know the specific cause of the exception, consider the following:

  • Hardware incompatibility. Ensure that all new equipment installed is listed in the list of the products tested Microsoft Windows market.
  • Service driver or defective peripheral system. A chauffeur service or defective peripheral system could be responsible for this error. The hardware problems, such as BIOS incompatibilities, conflicts of memory and IRQ conflicts can also generate this error.

  If the verification of the message bug list a driver by name, disable or remove that driver. In addition, disable or remove drivers or services that have been recently added. If the error occurs during the startup sequence and the system partition is formatted with the NTFS file system, you may be able to use Safe Mode to rename or to delete the faulty driver. If the driver is used as part of the start-up procedure of the system Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third-party remote control program. If this software is installed, you can remove the system startup service using the recovery and then Console by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the device or driver responsible for control of bug 0x1E. You can disable the cache in memory of the BIOS to try to resolve the error. You must also run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system. For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or after installation is complete. A possible cause of the error is lack of disk space for installation and the system BIOS incompatibilities. For any problems during the installation of Windows that are associated with lack of disk space, reduce the number of files on the hard disk drive target. Search and delete temporary files that you do not have to have, files hidden Internet, application backup files and files saved .chk , which contain fragments of files on disk scans. You can also use an another hard disk drive with more free space for the installation.

  You can solve the problems of BIOS by upgrading the version of the system BIOS

  =============================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  -------------------------------------------------------------------------

  It comes to my convenience store generic bluescreen:

  Here are a few ways to possibly fix the blue screen issue. If you could give the info from the blue screen that would be
  Help. Such as ITC and 4 others entered at the bottom left. And any other information such as STOP error
  codes and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death' crashes, and displays the
  information on all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged drivers, video drivers in particular, but there are other causes.

  You can follow these steps in the Safe Mode if necessary or the command prompt Vista DVD or Options of recovery if your
  system installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.
  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, 3rd party keyboard and
  smile, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Since the Thunderbird 38.0 update my computer crashes whenever I start Thunderbird. CAUSE: the sounds associated with a new message notification?

  I am able to use it in Windows safe mode but that is awkward. My computer works fine in normal mode as long as I do not open Thunderbird. Is it possible to go back to the old configuration of Thunderbird. I love the program but it is not very good like that. I tried running Thunderbird in its safe mode by pressing the SHIFT key, when I started to Thunderbird, but it came not in safe mode and the computer froze.

  Wayne Mery said

  rcharlie said

  I had this problem too. He has not happened since I disabled the new message alerts (not only sounds, but the popup and tray icon). It was freezing at startup only when there are new messages so he could get when I started upward. At least one of the freezes have shown the popup in part drawn on the screen, until all of the computer does not meet all, but hold the power button.

  rcharlie, I think your problem is different. I helped someone a few hours ago with similar symptoms where helped to disable alerts. And then, we determined that alerts could be activated IF we have disabled hardware acceleration to tools | options | Advanced | in general.

  rcharlie, what it do work for you?

  Yes. Or rather, the test message, I sent with hardware accel disabled and alert activated has not crashed the computer. Will update if it crashes again.

• Computer crashed recently, used the version 3.6.15, now with 4.0, how do I bookmarks from the previous version that was on the old computer. All files of this computer on the new computer under HD1?

  Computer crashed recently, used the version 3.6.15, now with 4.0, how do I bookmarks from the previous version that was on the old computer. All files of this computer on the new computer under HD1?

  bookmarks.html contains no bookmarks, this file is no longer used to store.

  Are you sure you're looking in the right folder, you are possible to search in the installation of Firefox rather than the profile folder folder. The following link provides details on the location of the profile folder - http://kb.mozillazine.org/Profile_folder_-_Firefox

  If you do not find places.sqlite you may not have access to your old profile folder.

• Vista will not register, the computer crashes with log off

  Computer crashes with log off of Vista.

  Hello

  Check your antivirus program to see if it is set to check the floppy drives, CD/DVD, or other removable media drives
  on closed session, restart, or stop. Those who do this will be often blocks that you met.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.