The computer crashes upward.

Programs to not launch.  Programs fail.  After a reboot, everything seems to be OK for a while.  Any ideas?

Hello

See if this helps you:

Search for malware, if necessary using the safe mode with networking.

http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

Windows Vista

Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

Once in Safe Mode with network, download and run RKill.

RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

http://www.bleepingcomputer.com/download/rkill/

Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

http://www.Malwarebytes.org/products/malwarebytes_free

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

You can clean your hard drive using these two methods.

"Delete files using Disk Cleanup"

http://Windows.Microsoft.com/en-us/Windows-Vista/delete-files-using-disk-cleanup

Using the free CCleaner program:

http://www.Piriform.com/CCleaner

In NO case use the registry cleaning Option in CCleaner

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

Update drivers:

Access the site on your computer or equipment manufacturing > Driver and Software Support Section > search your computer or hardware model number > then your operating system > locate the correct drivers > download and install.

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

"Optimize Windows for better performance.

http://Windows.Microsoft.com/en-us/Windows/optimize-Windows-better-performance#optimize-Windows-better-performance=Windows-Vista

@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

It would be a good idea to run the System File Checker tool if you have corrupted files

"How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

http://support.Microsoft.com/kb/929833

Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
    sfc/scannow

    The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

If SFC detects serious flaws, you may need to perform a repair upgrade Installation or relocation complete if you don't have a Vista DVD from Microsoft.

If you can borrow a DVD of Vista from Microsoft you save doing a reinstall full:

"How to perform a repair for Vista Installation"

http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

See you soon.

Tags: Windows

Similar Questions

  • I downloaded a Vista Service pack update. Upon restart, the computer crashes upward on the screen:! 0xc0190036! 2348/48738 (fusion.d11)

    I was invited by what looked like a legitimate update notification.  After update, it asked me to restart the computer.  The computer hangs above the screen.  I tried Start Up repair without result.

    Alton

    Hi AltonChewning,

    Please see the following thread similar with a possible fix:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/Windows-Vista-SP2-installation-error-loop-x64/a1234293-0fc5-4688-8e2a-9229b3ebe365?page=1

    I hope this helps!

  • try to uninstall service pack 3, but the computer crashes

    Service Pack 3/Pagemaker problems

    I am running Windows XP Home Edition. None of the Adobe CS2 programs allow me to open the old Pagemaker files.  It gives the error message: file is damaged.  According to my research, the problem with Service Pack 3.  The research also tells me that the solution is the removal of the service pack.

    When I try to remove Service Pack 3, the computer crashes.  Are there other solutions?

    Problem is not with the help of CS2 in itself - it works fine...  Apart from the fact that none of the CS2 programs will allow me to open Pagemaker 7 or old Pagemaker files.

    Who should have nothing to do with the level of service pack for XP!

    Yet once, if there is a problem, uninstall and reinstall CS2. But as you know, CS2 is quite old and is no longer supported. If this feature is important to you, I guess using the current version would be the way to go.
  • The computer draws upwards of the instilation id, but have no other record numbers

    lost cd after that it was loaded on the computer have only the instilation id. do I have to get a new

    * original title - cd has been loaded on the computer before I bought it, but I lost the cd. The computer draws upwards of the instilation id, but do not have the other numbers off disc can u help me *.

    See: How to replace Microsoft software Carey Frisch

  • Blue screen after the computer crashes

    original title: BSOD: Blue Screen Of Death

    My PC has run completely fine until here that is 2 years from the date of purchase. But now these BSOD concern me. The computer crashes, the graphics have become distorted [I am unable to read anything] and then GRASS comes... I can't read because it is very blurry... Please help me... I can't read the minidump files ' coz I don't know how we debug tools. Please help me!

    Hello

    The first couple of line indicates a problem with your Nvidia video drivers, so that would be the starting point. Download and install a fresh game, update for your system here:http://www.nvidia.com/Download/index.aspx?lang=en-us

    Uninstall the current set through the configuration/programs and features Control Panel, then reboot and install the new set. Do not install only the new on the 'old'.

    Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • the computer crashes (off) whenever I try to sync to iPad via iTunes

    the computer crashes (off) whenever I try to sync photos with iPad via iTunes.  Synchronization of fine music.  I uninstalled and reinstalled all apple applications and have the latest version I have iTunes.

    See the following article: http://www.apple.com/support/itunes/ and the links it contains.

    If this does not help, contact Apple tedhnical support to the: http://www.apple.com/contact/.

    They should be able to help you with your problems.  They are their products, and the problem seems to be with them and not with Vista.

    I hope this helps.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Hard drive being highly accessible all few seconds, although it is, the computer crashes

    Since about 3 days (or at least that is the oldest I noticed it, but he couldn't have done it much earlier) my computer was freezing for 3-4 seconds, while the hard drive turns on solid. This occurs regardless of whether the computer is nothing or not constantly every few seconds. I went around the internet looking for ideas, but nothing I tried to (disable superfetch, windows search, start in safe mode, update drivers, looking for the raid drivers, disarm avg, defragmentation and simply drop each program without importance, I can get away with) had no effect.

    The computer is an Alienware M15x, I got less than two months ago (totally awesome Christmas gift). It has Windows 7 Home Edition premium on it, a hard disk of 500 GB that says all diagnostics works very good and 6 GB of ram, I had AVG Antivirus on it too (until I took it in the attempt to solve this problem), and the protection of the system (the backups and whatnot) was already disabled. I also did a restore system before it started doing this, but which did not help either.

    The only problem it says that appears when I generate a health report to the system that is the disk queue length average 2-3 and going as high as 30. I can sit and watch points every 2-3 seconds since the resource monitor, which coincides with the HDD light will the computer crashes. It does even in safe mode, and it made all the games freeze market too.

    I'm completely at the end of my tether here and nothing I tried worked, is there something I'm missing here?

    Absolutely nothing worked, I'll try to reinstall windows, and if that does not do, Alienware will repair this one way or another. Thanks for the suggestions so.

    (edit a few hours later)

    I reinstalled, and it always does, so the hard drive needs to be spoiled. guess I must return.

  • The computer crashes; slow to start; Not relevant

    It's all thanks to IT.

    Hello

    You will have to provide much more information to help. Some questions are:

    (1) what you were doing when the computer crashed? What programs have been opened? Running?

    (2) you online were at the time? Had recently downloaded anything? You have applications antivirus and anti-malware on your computer? Have you run analyses with these programs? If so, what was done and what show?

    (3) what do you mean exactly by "inadmissible"? You can do something, or is it just sit there doing nothing? When you say 'slow start', which is just an impression or you timed? If you have timed the start, what are the gaps of time?

    (4) depth OS and little do you have? How much RAM do you have? What and how many programs you load at startup?

    This is the starting point to determine what might happen. There may be more questions that need to ask, but until you have answered these questions, there is little I can do to help you.

  • When I start the system upward, it goes to my logon screen and the computer crashes

    I have a windows vista computer and when I start the SUST until it goes to my login screen, I connect the Welcome screen comes the computer hangs... I do a control-Alt - Delete that returns the desk top

    When you get on the desktop, open the start menu to search msconfig and press ENTER.

    When the popup window appears, it should start under the general tab, and you should see normal startup. For now, set it to start diagnosis, press ok and restart the computer. If it still crashes, then replace the and set it back to normal startup, as something else is causing this problem.

    If she does not hang, and then back up the, set back to normal and this time go to the Startup tab. The list is all the things that are set to start when you start your computer. One of them is causing the computer to crash.

    If you have an idea that it might be that you can deselect it, apply, then reboot and see if it still crashes. Or you could just go in the list, one at the same time turn them off then restart suspended far, so you know which is the cause.

  • Since I can I 7, whenever I have more in a USB drive or USB drive, the computer crashes

    I recently upgraded from (English) Edition Vista Home Premium (English) Windows 7 Home Premium 64-bit. It works fine except that my NDAS drive is more work and as soon as I connect an external USB drive or USB key, the system just hangs and I have to turn off to spend. Even then, I have to disconnect the USB device, otherwise the computer will not start even upward. No error message, it just hangs. The computer (ACER AX1300) is only 3 months old and was purchased with a warranty upgrade for Windows 7
    It affects all programs running when I plug a USB key
    No error message is given

    Incorrect forum for these questions. Transfer your question here: http://social.answers.microsoft.com/Forums/en-US/w7performance/threads ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

  • the computer crashes when video Skype calling

    OK, so during a video call, the other night, my laptop Averatec running Windows XP home overheated and shut down, I restarted, since then when I go to the video conference on Skype, my computer crashes, restarts and gives me several different answers, for example a blue error screen, malware, software spies ect in conflict.

    Since this place has started, I took the following steps and not to find another solution.

    • check disk
    • updated Sytem
    • Update driver
    • Update directX
    • Uninstall / reinstall Skype
    • installation of mcafee
    • Disk Cleanup
    • removal of unwanted emissions

    I can't understand what other solution to use

    Other that the timelysupportof the right answer, you could do things * methodically * and in the following order:

    1. Uninstall Skype.
    2. Update your web maison.* of manufacturers motherboard chipset driver
    3. Update your audio device driver, since manufacturers web maison.*
    4. Update your video device since the manufacturers driver web maison.*
    5. Update your network from the Web pages of manufacturer (s) device driver. *
    6. Reboot and install CCleaner.  Run and cleaning of loose files it finds.
    7. Download and install MalwareBytes and SuperAntiSpyware (FREE for BOTH) and run scans of complete system with each of them (one at a time) and remove all found each of them.
    8. Open the registry and find the Skype entries and remove them.  Everything you find.  HKLM and HKCU areas in particular.
    9. Reboot again.
    10. Run a CHKDSK on all readers
    11. Perform a defrag on all readers
    12. Reboot again.
    13. Visit http://winodwsupdate.microsoft.com/ and install all the updates that are not optional (optional and hardware software optional can be ignored) and who do not update anything you don't want to update (such as Internet Explorer, etc.)
    14. Restart and repeat 13-14 until you have updated not more not optional, you need to install.  Reboot once more for good measure.
    15. Download the latest version of Skype and install it. Reboot before running it.

    * If possible, go the real manufacturer - not the whole machine - but the device.  For example, if you have an Intel chipset based motherboard, download the drivers for it to Intel.  If you have a video device nVidia, download the drivers for it from nVidia.  If you have a Broadcom network device, download the drivers for it from Broadcom.  If you have a RealTek audio device, download the drivers for it from RealTek.  And so on...

    If, after doing all this in this order, it still does not - it is probably a hardware problem or a Skype number.  However, you might try ONE last thing.  SFC/scannow.  You will need your Windows XP CD-ROM.

    After that - you are really left with material/Skype or something messed up so you might resign yourself to try a full installation of fresh erase (although I wouldn't do if I couldn't have my disk image and send it to where it was before I tried.)

  • Vista will not register, the computer crashes with log off

    Computer crashes with log off of Vista.

    Hello

    Check your antivirus program to see if it is set to check the floppy drives, CD/DVD, or other removable media drives
    on closed session, restart, or stop. Those who do this will be often blocks that you met.

    How to troubleshoot a problem by performing a clean boot in Windows Vista
    http://support.Microsoft.com/kb/929135
    How to troubleshoot performance issues in Windows Vista
    http://support.Microsoft.com/kb/950685

    Optimize the performance of Microsoft Windows Vista
    http://support.Microsoft.com/kb/959062
    To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
    The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
    a small box in the lower-left - show for all users can check only).

    How to check and change Vista startup programs
    http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

    A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
    --------------------------------------------------------------------

    Tools that should help you:

    Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
    they loaded and much more. This exceptionally effective utility will show you even owned by each process.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

    Autoruns - free - see what programs are configured to startup automatically when your system boots and you
    opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
    start the settings.
    http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
    Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

    There are many excellent free tools from Sysinternals
    http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

    WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
    starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
    The command - line String, product name, file Version, company name, location in the registry or the file system,
    and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
    http://www.NirSoft.NET/utils/what_run_in_startup.html

    There are many excellent free tools to NirSoft
    http://www.NirSoft.NET/utils/index.html

    Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
    http://www.KarenWare.com/PowerTools/ptwinwatch.asp

    Many excellent free tools and an excellent newsletter at Karenware
    http://www.KarenWare.com/

    Hope these helps.

    Rob - bicycle - Mark Twain said it is good.

  • the computer crashed, I need to reinstall my operating system software

    My computer crashed. How can I get a copy of my operating system from Vista to reinstall? I bought a mac and parallels software, and I need to install my software Vista be able to use it (it has been preloaded on my pc crashed).

    Hello

    Here are the different ways to reinstall Vista on your computer "crashed".

    If you want to install anywhere else, like her, is a preinstalled OS, it is linked to the original computer "crashed" it came installed on.

    An OEM license is not transferable

    And install on a Virtual Machine requires a new license.

    @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

    There is no Windows Vista downloads available from Microsoft.

    You can contact your computer manufacturer and ask them to send you a set of recovery disks.

    They should do this for a small fee.

    And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.

    The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)

    Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.

    Ask them to the proper key sequence.

    Some manufacturers have more available Vista recovery disks.

    If this happens, you may need to try this instead:

    You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

    Other manufacturers recovery DVDs are should not be used for this purpose.

    And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

    Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

    "How to do a clean install and configure with a full Version of Vista '

    http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

    And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

    And phone Activation may be necessary when you use the above installation method.

    "How to activate Vista normally and by Activation of the phone '

    http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

    See you soon.

  • Wireless adapter fails - then the computer crashes.

    I've had this problem for a few days now. Basically, the problem is that my computer freezes completely and it becomes unresponsive at random times. It happened while I watch videos, play games or surf the internet, even while I'm on the login screen.

    I have recently noticed that just before the accident, strange things happen that seem to be centered around the wireless adapter. I'm not going to load a Web page, so I'll check the icon wireless and see that I'm connected to the network, but not internet. And then, as I try to disable and re-enable the adapter, the computer will crash.

    I just downloaded the drivers from the adapter and install them, but that has not changed anything.

    Anyone know what could cause this weird problem?

    Thank you.

    PS:

    Just happened twice again. Failed loading of Web pages, and who warned me that something was up. I unplugged the adapter, the operation aboard as usual for a while, but the computer does not save the adapter has been unplugged and continued to try to load web pages for a few moments, before it crashes.

    The first time, he had a BSOD, but he flashed to the top for a while before the computer restarted itself.

    Adapter is TL-WN722N

    Hello

    Thanks for posting the query on the Microsoft Community Forums. You have reached the right place. Let us work together to find the cause of this problem and try to solve.

    There could be various reasons for gel as a third-party program, modules, the origin of the problem of the computer.

    Crashes Windows or freezes
    http://support.Microsoft.com/kb/2681286

    Note: 1) the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

    (2) If you run the antivirus program that is infected by the virus scan will get deleted. Therefore, reinstall the program. Also, if files and folders are affected by the virus, while they might even get deleted.

    Hope this information helps. Answer the post with an up-to-date issue report to help you further.

  • The computer crashes during Gaming (BSOD) and Windows performance index

    Windows 7, 64-bit

    OK, so I've had this problem for weeks. Initially, I thought the graphics card was defective. When I ran the Windows experience index, it would break on the part where he is to note the graphics card. So what I did I sent to the manufacturer and got a new, but the computer STILL crashes. Maybe the motherboard is damaged - I don't know.

    Another measure taken was to use the command prompt and the "sfc/scannow". It did not work.

    I have almost all the necessary drivers. The only one, I can not install is the Display Driver for the graphics card, for some reason any.
    The graphics card is an NVIDIA GeForce GTX 660 TI and the motherboard is an ASUS P9X79. They are compatible with each other.
    Here is the BSOD code that appears on the crash on Windows Experience Index (Rating)
    Problem event name: BlueScreen
    OS version: 6.1.7601.2.1.0.256.48
    Locale ID: 1033
    More information about the problem:
    BCCode: 116
    BCP1: FFFFFA801DE874E0
    BCP2: FFFFF880051D4F50
    BCP3: FFFFFFFFC000009A
    BCP4: 0000000000000004
    OS version: 6_1_7601
    Service Pack: 1_0
    Product: 256_1
    Files helping to describe the problem:
    C:\Windows\Minidump\100813-17128-01.dmp
    C:\Users\###\AppData\Local\Temp\WER-64225-0.SysData.XML
    Read our privacy statement online:
    http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
    If the online privacy statement is not available, please read our offline privacy statement:
    C:\Windows\system32\en-US\erofflps.txt

    Please help me, I'm getting sick and tired of these accidents. They become a nuisance.
    Sincerely,
    Saikex

    OK, so I thought I should touch basis with you guys, because although no one answered for a while.

    The problem is certainly a problem of overheating.

    I figured out how to fix the problem - all I had to do was increase the GPU fan speed.of. Because of this, I was able to install the GPU driver successfully and play video games. (Use the GPU Tweak to increase the fan speed)
    I hope that whoever reads this found useful.

Maybe you are looking for

  • Battery empty

    When I took my iwatch in the box, I realized that the battery is completely discharged so that it does not start. Is it possible that the watch is out of the factory free of charge?

  • Pavilion 2320dx g6

    eager to downgrade to windows 7 ultimate, but can not find the drivers.

  • 4K are oversampled?

    Sometimes I chat with my clients and colleagues that we get a quality image of the F5 because we get the 1920 x 1080 sensor 4K low - or sur-échantillonnés. But in turn almost always bringts upward the objection and then the 4K image can not be good a

  • CVI Distribution needs 2 versions of CVI device drivers

    I have an app that I'm building a distribution, it is in the CVI 9.0.1 and several versions before that. When I build it, he asks the device drivers of CVI (CVI 9.0.1) of February 2009 and drivers of CVI (CVI 8.5.1) since March 2008. Is it possible t

  • switch split screen 10 + rotation issue

    Hello I wonder if anyone has the same problem: When optional screen (windows are side by side) split and turned in a vertical position for a few seconds he blocked that is, the screen is half black, not possible to run any application, windows button