for HP G6-2244sa USB drivers

Similar Questions

• 64 bit Windows7/8/8.1/10 USB drivers for Palm Desktop

  Thank you people much more to Aceeca.com (Palm OS Garnet NEW manufacturers), the USB drivers for Vista, Windows 7 and 8 Win 64 bit operating systems are available.  There are many users Palm Desktop 4.x strives also to the declaration.
  
  I have synced my TX my Vista64 laptop computer bits and Windows 8.1 HP spectrum X 2 hybrid successfully through my USB cable.
  
  The drivers are located here:
  
  Aceeca Driver Downloads

  (NOTE: as of today, 01/08/2016 Aceeca site to be down for 'construction'.)  Drivers can also be found here: http://www.palmdr.com/windows-7-64-bit-usb-drivers)

  Installation instructions for Windows 7 (from Aceeca) are included in the download.
  
  Basic instructions:
  
  1 download the drivers and extract them in the same folder.  Remember the folder that you extracted to.
  
  2. try to HotSync your device.  It will fail.
  
  3. open the Device Manager and look for the yellow Triangle next to the other "Acceca" or "'Palm device ' in the"Other devices"section."
  
  4. right click on the device and choose "Update driver software".
  
  5. choose "Browse my computer for software" and guide them to the folder that you extracted the drivers Aceeca.
  
  6 choose 'Next' in the driver and then file location window tell him 'Confidence always Aceeca Ltd. software', then click on the button "install".
  
  7. I received an error message (Vista64) who told me "the drivers have been installed, but the device could not be opened." I realized my TX had expired, and fell asleep.  I tried a HotSync and it worked!

  Good luck!

  NOTE: Palm Desktop 6.22 may only multimedia show and install.  Here's how to fix this:

  If Palm Desktop 6.2.2 shows only the media and installation, try this: right click on the shortcut for Palm Desktop, and then choose 'run as administrator '.  Other modules should appear.

  To Palm Desktop run as administrator every time in Windows 8 / 8.1:

  Close to Palm Desktop, if it is open.  (This is a very important thing to do when you use 6.2.2 - it has been known to lose data when a computer is shut down without closing the program!)

  Right click on the desktop icon of Palm in the metro screen, then choose "open file location".  You will now see the actual file for the shortcut.

  Right-click on the file "Palm Desktop" shortcut, then properties.  Now, choose the tab compatibility at the top.

  At the bottom of the Compatibility tab is a checkbox: "run this program as an administrator", click OK.

  Try to open the Palm Desktop, all parties must appear.  You can see a box opens when you close the program asking "did the program runs correctly.   I chose 'Yes', and it has been working fine since then!

  If you are using a much older PalmOS device and try using Palm Desktop 4.x, you will need this additional patch Pimlico Software:

  Palm HotSync configuration

  WyreNut

  Forum member bobboffin has added this message:
  
  "After you try your first HotSync and failing (as expected) you may be unable to find any trace of the device in Device Manager, making the next step very difficult. It is me, and after some research, I discovered the following trick that allows Device Manager to display hidden and devices not present.
  
  Open Notepad and paste the following two lines are:
  
  Set DEVMGR_SHOW_NONPRESENT_DEVICES = 1
  Start devmgmt.msc
  
  Save it as SetDev.bat in My Documents.
  
  Open My Documents in Windows Explorer and double-click SetDev.bat. Device Manager opens.
  
  On the view menu, select Show hidden devices.
  
  You can now see in the other position of the device with a yellow triangle against it.
  
  You can now proceed to install the drivers according to the instructions.
  
  Note that the driver supports most versions of Palm OS. "I actually use an Aceeca Meazura 1000 rugged PDA running OS 4.1 - bobboffin.
  
  I hope this helps!
  
  WyreNut

  pattirclark wrote:

  
  

  SUCCESS... After writing my last response indicating no connectivity, I tried a last time and success for the Palm Palm devices and synchronization with 64-bit Windows 8 71 22.  Thanks again to WyreNut for all the support that I know that this Forum is an advantage for those who have limited computer knowledge and detailed suggestions has worked perfectly...

  Thank you again...

  And thank you! pattirclark!  You are the first person to report success with drivers Aceeca and Windows 8!

• USB drivers for HP50g on Windows 8 (64-bit)

  Hi all

  Has anyone tried installing the USB drivers for the 50g on Windows 8?

  Conn4x installed well but USB drivers comes. I tried all available troubleshooting options using the features of Windows 8 compatibility (XP, Vista and 7) and none of them worked.

  So I was wondering, maybe someone here may have already installed and could share some tips.

  Thank you

  Márcio

  I read messages in other forums indicating that the conn4x and the USB driver peut be installed.

  The post on the forum indicated that Windows 8 comes pre-configured with the possibility for signed drivers enabledapplication.

  In order to install the USB driver, signed driver enforcement must be disabled.

  See this forum comp.sys.hp48 post it here:

  https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/win$208/comp.sys.HP48/tzpjXzysXrU/-XZbRLN2CucJ

  Please inform the forum if you succeed, and what measures allowing you to complete the installation.

• Need USB drivers for old Equium L40 - 10U PSL41E running Vista 32-bit

  Hi all

  I think that my USB driver is corrupted. I found the ChipSet, LAN and BIOS drivers for my old PSL41E Equium L40 - 10U running Vista 32 bit. However, I have not found the USB drives I need. USB drivers are contained in the ChipSet, BIOS or LAN driver?

  If not, where can I find and download the USB drivers for my old old Equium L40 - 10U PSL41E running Vista 32 bit?

  Thank you! -Le Cannet

  Here is where I found the drivers (but with no mention of USB drivers):
  [Drivers Equium L40 - 10U PSL41E | http://uk.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp?service=UK&selCategory=8 & selFamily = 391 & selSeries = 326 & selProduct = 752 & selSho rtMod = 541 & language = 13 & selOS = 26 & selType = all & yearupl = DST & monthupload = & dayupload = & useDate = null & mode = all Machines & search = & action = search & macId = & country = 8 & pa ge 1 = & startPage = 1 & prevCl = true]

  > Are contained in the ChipSet, BIOS or LAN USB drivers driver?

  USB drivers are part of the Windows operating system.
  The USB ports should work after the installation of the Windows operating system and, therefore, there is no such thing as a USB driver for the USB 2.0 standard.

  In addition, the chipset driver must be installed.

  I checked the proposed link in your ad and here, you can download the Intel chipset utility.
  The update of the BIOS is also available

• Need drivers for my Satellite 2430 USB

  Hey,.

  I realized that there is no USB drivers for the 2430 series that you can download, but I just reinstalled Windows and I had no USB drivers.
  What should I do?

  Thank you very much

  Hello

  You are right. If you have installed a Windows XP, so you don't need USB drivers.
  OS uses own common Microsoft Windows drivers.

  But if you have problems with the USB ports I recommend to install the chipset drivers.
  This should help.

• How can I install usb drivers for win98 or win98se without cd player?

  I have an old laptop Dell Inspiron 3000 in my closet I have desided to fix so I have downgrated for win98 winme and I can't find the usb drivers?

  and I don't have a cd burner or a dvd burner! Please give me drivers win98 and win98se =)

  Hi TheTechKid607,

  Windows 98 is a Microsoft product. There is no support available for Windows 98.

  For more information, refer to this link: end of support for Windows 98, Windows Me, and Windows XP Service Pack 1

  Hope the helps of information.

• USB drivers need G6-2210us after the decommissioning of windows 8 for windows 7

  Just demoted from windows 8 for windows 7 and I am in need the USB drivers for the two ports on the left side.

  This is the ID of the hardware:

  PCI\VEN_1022 & DEV_7812 & SUBSYS_1849103C & REV_03

  PCI\VEN_1022 & DEV_7812 & SUBSYS_1849103C

  PCI\VEN_1022 & DEV_7812 & CC_0C0330

  PCI\VEN_1022 & DEV_7812 & CC_0C03

  Your help would be much appreciated!

  Hello:

  Please install the AMD chipset driver and reboot.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows 7-64

• Envy TouchSmart 20: Need USB drivers for HP Envy 20 which was lowered from Win8 for Win7 64 bit

  I need USB drivers for a craving 20 TouchSmart, which was lowered from Win8 to Win7 64 bit. The Device Manager has the following information:

  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C & REV_02
  PCI\VEN_104C & DEV_8241 & SUBSYS_2AE5103C
  PCI\VEN_104C & DEV_8241 & CC_0C0330
  PCI\VEN_104C & DEV_8241 & CC_0C03

  Thanks in advance to anyone who can help

  Hello:

  This driver should work...

  Texas Instruments USB Controller Driver

  File name: sp70786.exe

• Require the NDIS2 drivers for HP LAN and USB travel hub

  Hello

  I have some ultrabooks with no LAN on board, which I am trying to use an image Ghost (the network).

  I use a HP LAN and USB hub, but to get the ghost to work, I need drivers BACK (NDIS2) to get this working.  Any ideas where I could get these in.  I had a good glance but had no joy so far.  All of my generic drivers seem to fail too!

  Thanks in advance!

  Hello, I'm not familiar with the "HP LAN and USB travel hub", but I used a good amount of Ghost!

  I think that it can be difficult to get this ethernet device works in DOS mode.  One of the problems is that DOS itself does not have support for the USB, so you would first get drivers in real mode USB installed and then find/layer drivers for HP LAN and USB travel in addition to this hub.

  This looks like a difficult task.  Must the ghost image be stored/retrieved over the network?  It may be easier to use Ghost with a local storage device, for example a USB optical drive or an external/USB drive (if that's an option)...

  Another option would be to use a different disc Imaging program (the one who works within Windows, or something like a Windows PE boot disk uses instead of BACK).

  I hope this helps!

  Dave

• Ntoskrnl 9f BSOD after updating drivers for the video card, usb 3.0, LAN, Rapid Intel ST

  Hello

  need help. I get the BSOD constantly to turn the computer off. Previously, I've updated the drivers for the video card, usb 3.0, LAN, Intel Rapid ST. could check my miniDMP and determine the driver causality. THX!

  ==================================================
  Dump file: 112014-19874 - 01.dmp
  Time of the accident: 20.11.2014 20:12:18
  Bug Check String: DRIVER_POWER_STATE_FAILURE
  Bug check code: 0x0000009f
  Parameter 1: 00000000'00000003
  Parameter 2: fffffa80'0cf7f060
  Parameter 3: fffff800'00b9c3d8
  Parameter 4: fffffa80'13915010
  Caused by the driver: ntoskrnl.exe
  Caused by the address: ntoskrnl.exe + 75bc0
  File description: NT kernel & system
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 6.1.7601.18409 (win7sp1_gdr.140303 - 2144)
  CPU: x 64
  Plant address: ntoskrnl.exe + 75bc0
  Stack address 1:
  The stack address 2:
  Address 3 the battery:
  Computer name:
  Full path: C:\Windows\Minidump\112014-19874-01.dmp
  Number of processors: 8
  Main version: 15
  Minor Version: 7601
  Size of the dump file: 1 037 480
  Dump of file time: 20.11.2014 21:56:45
  ==================================================

  Minidumps files (note the oldest, one is before the update of drivers):

  https://onedrive.live.com/redir?RESID=264854BEFA762656! 1121 & authkey =! AACkoNzGq5RwWFw & ithint = the file % 2czip

  THX!

  PCH

  These were related to the AVerTM62_x64.sys TM6200 BDA Driver of AVerMedia TECHNOLOGIES, Inc..  I remove the current driver and install the latest driver available.

  

• How to: get USB drivers Serial Adapter for Windows7

  Please where can I get USB drivers Serial Adapter for Windows7.

  I was using this adapter under Windows XP normally. But it does not work with Windows7, even if I installed the software on the CD that came with the adapter.

  Kind regards!

  Arthur

  It is the responsibility of the manufacturer/peripherals to create drivers for their products for operating systems, the manufacturer wants their products to work with. Therefore, it is suggested that you contact the support site of the device manufacturer to obtain the latest drivers for Windows 7, if they are available.

  Kind regards

• I5-d001sx: could not find the usb drivers for win 7 32 bits for the model 15-d001sx

  Hello
  I have hp laptop 15-d001sx. My USB doesn't work not with win 7 someone can you please tell me from where I can download the usb drivers.

  Hello:

  Download, unzip and run the file setup.exe from the link below...

  https://Downloadcenter.Intel.com/download/24503/USB-3-0-Intel-USB-3-0-driver-for-Intel-NUC

• USB drivers for dv6-6c35dx

  I have problems getting my USB ports to register at all, it shows the usb controller drivers are installed and working properly, but when I plug something in it does not, please help

  then, I thought about it... the USB drivers are part of all freakin GRAPHICS DRIVERS, thanks a lot yall

• Reinstall the USB drivers for laptop G62-367DX operating system windows 7?

  Hello!! I recently got a HP G62-367DX laptop about a month and half ago and a mouse without a wire about two weeks later. The mouse no longer works last week and tried to put his receiver in other ports usb with no luck there. I also tried to do a system restore and uninstall usb drivers and then by using the device driver to find the hardware changes defective. The only thing I got was an error indicating that the software device driver has not been installed successfully. Is it possible to manually install the drivers I need, or is it a problem of operating system that may require a reinstall of my OS? I would greatly appreciate any comments. Thank you.

  You will need to reinstall the original chipset drivers.

  Go to the Start Menu -> click on all programs ->, click on manage recoveryr (open Recovery Manager).

  From there, under "I need help immediately" you can select "Hardware Driver réinstallation"-> click Next.  When you see the list of available selection drivers "ATi (or AMD) Driver VGA" and click Next.  Once it's done, click on finish, then will restart your computer and you can test your system/USB devices to verify that it is fixed.

  If it does not, meet with your specific model number or PN (product number).

• Journ.e Touch - need USB drivers

  Can you give me a link to download the USB drivers for toshiba journ.e touch?

  Hi mate

  I think you mixed up something tactile E travel is a plug-and-play device and there is no need of USB drivers.

  You can use a USB cable (available separately) to connect your DAY. E TOUCH to a computer for the file transfer.

  1. when the JOURN. E TOUCH is on, insert one end of the USB cable into the mini USB port on your DAY. E TOUCH.

  2. Insert the other end of the USB cable into the USB port on the computer.

  3. the screen connect to PC is displayed on your DAY. E TOUCH.

  4. once the connection is ready, the computer will recognize the DAY. E TOUCH as a mass storage, displayed as "JourneTouch" in your computer.
  Now you can start transferring files between the computer and the JOURN. E TOUCH.

  5. double-click on "JourneTouch" in your computer. Records music, photos and videos appear under "JourneTouch".
  -In the Photo folder, you will find the records Picasa and Flickr, if you use these applications to upload photos.

  6. you can copy files from or to your DAY. E TOUCH.

  * NOTE *.
  You can access the files in the internal memory of your DAY. E TOUCH from the computer. You can't access the files in the inserted SD card or USB to the computer.