The customization window has no instructions and tell me what happens.

Similar Questions

• somehow my printer has stopped working and the computer tells me that an unknown error has occurred - can someone tell me what happened

  My printer no longer works the computer tells me an unknown error has occurred, can you help me understand?

  Hello

  ·                         try to uninstall and reinstall and use the latest printer drivers VISTA for your model of the manufacturer of the printer

  http://support.Microsoft.com/GP/printing_problems

  Read the information above from Microsoft about fixing printer problems.

  ·

  You can also track information to try to solve your problems of printer below

  read the printer correct that information the slot microsoft, including the 'fix - it' and the information of the links to the other

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  and read this microsoft tutorial too

  Introduction

  This tutorial is designed to help you identify and fix the problem printer common windows problems, including print errors, or errors, and other issues that could prevent you from printing. This tutorial does not cover printing problems related to specific programs. Printing problems can be caused by cables that are not properly connected, corrupt, drivers, incompatible drivers, the printer settings, missing updates and problems with your printer.

  How to use this tutorial

  For best results, complete each step before move you on to the next. Try to print after each step before moving on to the next step.

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

• I had photoshop on my windows now the graphics card has gone bad and you want to move to my MAC I pay every month and I am a student, so, how can I transfer accounts until I get a new computer

  I had photoshop on my windows now the graphics card has gone bad and you want to move to my MAC I pay every month and I am a student, so, how can I transfer accounts until I get a new computer

  If you are on subscription, you just install it on your new computer and sign in with your ID Adobe that you used to buy PS when you arrive up to two installs, it will tell you that you have exceeded you install limit and asks if you want to disconnect other computers. Just so disconnect you. No need to have to disable or call Adobe!

• When I open new browser window has reversed colors and no title of the window.

  Usual - when I opened 1 window at the top of the FF of the page appear like this http://imagestun.com/hosting/kartinki/ff1.jpg
  But when I try to open something in a new window, the new window has strange colors up and no title, like this
  http://imagestun.com/hosting/Kartinki/FF2.jpg

  If I switch from window mode to full-screen and conversely, everything is normal.

  I used Classic theme Reestorer addon, but the same problem occurs when this addon is uninstalled. Restaring computer, reinstall firefox etc. nothing helped, I still get these annoying menu white letters when I try to open the windows of firefox 2 or more.

  Is it possible to fix it?

  Launch Firefox in Mode safe
  
  While you are in safe mode;
  
  Firefox Options > advanced > General.
  
  Find and stop using hardware acceleration. Then restart.
  If there is still a problem, go to for Firefox > Extensions and
  Disable all add-ons that have something to do with the display of the page. Turn it back on.
  If there is still a problem, disable add-ons more. Continue until the
  the problem disappeared.

• Windows has been removed and once again, the Epson Stylus CX4800 printer acceptable printers.

  Download driver printer Epson Stylus CX4800, etc., last nite... today do not have access to the printer... Windows has been removed and once again, the Epson Stylus CX4800 printer acceptable printers.  What can I do to get this printer permanently replaced on the acceptable list of printers or if I should buy a new printer!  This has been a problem for almost 2 weeks now... What can I do? Every time that you add the printer to the list as soon as I turn off the PC, the printer is removed from the list of Windows! Is this a defect of the windows program I or is this printer is no longer one that windows will recognize?

  Help!

  Hello

  "Every time that you add to the list"

  We do not do anything.

  It is not Microsoft.

  These are public Forums set up by Microsoft on their servers and animated by them.

  We are mainly Windows users help each other here.

  Here is the link to Epson to the latest drivers for your printer model.

  Choose the appropriate operating system from the Menu drop-down.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?OID=58606&BV_UseBVCookie=Yes&infoType=downloads&platform=OSF_W_VISTA-32

  And a Troubleshooting Guide for it.

  http://www.Epson.com/cgi-bin/store/support/supDetail.jsp?BV_UseBVCookie=Yes&infoType=overview&OID=58606

  See you soon.

• Why the option "show me other ways to activate" in 'Screen of Activation Windows' has been disabled and grayout outside?

  Hello

  My company PC have installed the version of 7-64 bit window, these computers are not allowed to connect to the internet for security reasons. On other computers phone allows us to make the windows activation. But on a PC, the option "Show me other ways to activate" in 'Screen of Activation Windows' has been disabled and grayed out out. Any suggestion to solve this problem?

  Thanks in advance.
  Allen

  Try this method

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  J W Stuart: http://www.pagestart.com

• My option "open in a new tab in the same window" has stopped working.

  After working for centuries without any problem, my option "open in a new tab in the same window" has stopped working.  Support suggested that I go to tools, select internet options and open tabs, and then select open in a new tab in the same window option.  I did as instructed and concluded that this option under the tabs was already selected and unchanged.  I changed this option, closed my browser and restarted my computer as instructed.

  As before you follow these instructions, and when viewing online and wish to open a link in a new tab in the same window I once again this desired option.   Internet does not take into account my instructions and opens my link in a new window.  This is extremely irritating.

  Does anyone have a solution?

  Hello

  What version of Internet Explorer work?

  You can try the following steps and check:

  Method 1:

  You can reset Internet Explorer 9 settings and check

  http://Windows.Microsoft.com/en-in/Windows7/reset-Internet-Explorer-settings-in-Internet-Explorer-9

  Warning: him reset Internet Explorer settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Method 2:

  How to reinstall or repair Internet Explorer in Windows 7, Windows Vista and Windows XP

  http://support.Microsoft.com/kb/318378

  Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings.

  Important note: ignore in place update from the above mentioned link.

• The address window has been reduced. How can I make it any longer so I can see the address (or most of them at least)?

  I've updated to Firefox for Mac 3.6.23. I have OS 10.4.11. Immediately, I noticed that the address window has been reduced to about half an inch. The search engine is long, like the address used to be window. It's not good for me. I usually use the address window to make changes and move it to a new page. I can't do it now. How can I make long once again the address window? Can I return to 3.6.22? I need this long window.
  Sincerely,
  Gerald E. Strickland
  Bradenton, Florida

  You can place the mouse between the address bar and the search bar, and it will become an icon of resize.
  
  Press the left mouse button and drag it to the right to make the larger location toolbar.

  You can also reset the related wides by deleting localstore.rdf in the Firefox profiles folder

  • http://KB.mozillazine.org/Profile_folder_-_Firefox
  • http://KB.mozillazine.org/LocalStore.RDF

• Receive the error "Windows has stopped working" after installing the update of security for Vista (KB977165)

  I use Vista Business, I installed the update of important security for Vista (KB977165), after installing and restarting my computer, I received an error message that Windows has stopped working and then I get a black screen. I rebooted in safe mode and did a system restored. So currently I did not update.

  This happened to someone else? Is it I can do it fix it?

  Hello

  Since you get such a serious mistake, I would use the free incident reports.

  Windows updates - free Incident report

  Go here and click on-> Windows Update fails while searching, downloading or installation of updates
  http://support.Microsoft.com/GP/wusupport#tab3

  The security updates, you can get free support Incident report
  http://www.Microsoft.com/protect/resources/support.aspx

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• He says I have the latest verson 7.4.0.137 but I still can't open my files NAVE camera raw. I just got the NIKON d5500 has been added and started to get discouraged.

  He says I have the latest verson 7.4.0.137 but I still can't open my files NAVE camera raw. I just got the NIKON d5500 has been added and started to get discouraged.

  Photoshop elements 11 will use only up to Camera Raw 7.4. You'll either need to upgrade Photoshop Elements or use the free DNG Converter provided by Adobe. The latest version of the DNG Converter is 9.1.

  Adobe - Adobe Camera Raw and DNG Converter: for Windows: Adobe DNG Converter 9.1

• Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds?

  Y at - it an easy way to have a version number that the code VI has access to, and which is used as the version number for the executable file and the installer builds? Now whenever I update my software I need to change the global variable where I store the version number, and then when I build I have in hand, open the properties and change the version number for the executable file and the installer. Is there an easy way to make these as all corresponding automatically?

  Have you tried a search? This question comes up a LOT. Here are the results of a search: http://forums.ni.com/t5/forums/searchpage/tab/message?location=Node%3A170&q=application+version#mess...

• The print spooler has a problem and closes its doors.

  The print spooler has a problem and closes its doors. This often happens when I'm trying to print something with multiple copies. Any program that I use either Wordperfect or editor he has a problem. It helps that I could restart the computer and it clear, but not even this works now.

  Try to uninstall and reinstall the printers.  Update the drivers for the printers you use.  Try to have both installed printer and see if you can isolate / how printer driver may be involved in the issue.

  Another option to consider is to...

  (Post by marc_lebowski)

  Clear printer spooler files and restart the Spooler Service

  =================================

  1. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.

  2. double-click on "Printer Spooler" in the Services list.

  3. click on stop, and then click OK.

  4. click on start, type "% WINDIR%\system32\spool\printers" in the search box and press ENTER, remove all files in this folder.

  5. click on start, type "Services.msc" (without the quotes) in the search box and press ENTER.

  6 double click on "Printer Spooler" in the Services list.

  7. click on start. In the Startup Type list, make sure that "Automatic" is selected and click OK.

  See if the problem persists.

• I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see all at the same time, of

  Hello

  My name is Ellie and I am new to Dreamweaver.

  I can switch between the code sheet and css html, but I would like to see them both at the same time as well as the design window. Right now and can see rather the design and code html or design and css. How can I arrange to see everything at the same time, design, HTML and CSS?

  Thank you

  It ends up something like that...

  

• I installed adobe lightroom for free for 30 days and I would like to subscribe for 1 year, but the English version has been installed and I prefer a french, how do I change it?  Thank you!

  I installed adobe lightroom for free for 30 days and I would like to subscribe for 1 year, but the English version has been installed and I prefer a french, how do I change it?  Thank you!

  Hello

  Please see: -.

  Countries and languages FAQ: How can I change the language that appears in my creative cloud app?

• Hi, I want to export my movie on DVD clips, burning them like AVCHD, movies are made on the basis of an iphone 6 1080 p 60. I want to keep the best possible quality. Can someone tell me what that best project settings I should use? Thank you very much.

  Hi, I want to export my movie on DVD clips, burning them like AVCHD, movies are made on the basis of an iphone 6 1080 p 60. I want to keep the best possible quality. Can someone tell me what that best project settings I should use? Thank you very much.

  Johnny

  Thanks for the reply to my comments to complete Responses to your subject.

  Factors in your planning...

  First elements 13/13.1 does not support Windows XP, Windows Vista or Mac OS 10.7.

  First items 10, 11 or 12/12.1 on a Windows computer is 64-bit application when it is run on Windows 7, 8 or 8.1 64-bit computer. Otherwise, it's a 32-bit application. This has implications on important it resources, particularly for your biggest projects in Premiere Elements.

  Video mobile phone registered with a variable rate is a consideration for any version of Premiere Elements. If your cell phone video shows with audio out of sync and you use the hand brake to correct this condition, you should get good quality of the handbrake H.264.mp4 (just make sure that the export rate is comparable to that of the original in addition to changing the frequency of images to a number (use same as source) and selecting constant for this frame rate).

  If any clarification on the above, do not hesitate to ask.

  Thank you.

  RTA