The data migration to the new SSD after end of 2009 update

Similar Questions

• Failed to install the new SSD on OSX support!

  Hello!

  I'd be happy if anyone of you could help me out here!

  I have questions, try to install a new own OSX on a new SSD on my Macbook Pro mid-2012.

  I have done this before on an Evo 840 500 GB Samsung without problems.
  This time, I use a Samsung Evo 850 1 TB, but when I try to install OSX it won't let me.

  I use (command + R to start) recovery mode and as a first step in disk utility, I couldn't format the new SSD in Mac OS x journaled, it just stopped at 50%.
  Then, I swapped the SSD for a normal (Non - SSD) hard drive, installed OS x on this drive without problem and formatted the SSD drive in disk utility on this new OSX on the HARD drive regularly after putting the SSD drive in an external enclosure.

  After that, I swapped for the formatted SSD HARD drive, but I still cannot install OSX. In disk utility from recovery mode it is said "not mounted" under the mount in the info Point. I tried the strength to mount it in a Terminal too, but it will not be displayed as installable disk mounted when you run OSX installation.

  Help greatly appreciated!

  The SSD will appear in disk utility when it is connected to the MBP via USB?  If so, format it in disk and Carbon Copy Cloner utility to copy the internal HARD drive to external SSD.

  When you are finished, test the SSD by starting the MBP with the option key down key, and then click the SSD.  If she starts the MBP, then swap in the MBP.  If it does NOT then the MBP, internal SATA cable is suspect and should be replaced.

  Ciao.

• E540: Dolby Advanced Audio v2 cannot be installed on the new SSD

  Hello

  the Dolby Advanced Audio v2 question keeps grinding my gears. The situation:

  I added a second drive (SSD) successfully to the E540, everything works and is configured correctly. I still have the disk original in place and achieved 8.1 Windows (x 64) installed on both drives. However, I can't run Dolby Advanced Audio v2 when starting Windows Setup (fees) on the SSD. Just after starting, or you try to start the application, there is a Windows error message telling me that the Dolby-driver cannot be executed, and I have to reinstall the application if the error continues to exist.

  When booting from the original HARD disk there is no problem with Dolby Advanced Audio v2, the application works very well. Every time booting from SSD error message appears.

  I know that it is a known problem and I read all of the information that is out there on the internet. I tried uninstalling and reinstalling the DRIVERS on C: several times record, everything was installed in orders different and tried almost all of the combinations use the audio CONFIGURATION, Setup in DOLBY, the UIUa64 and so on. I can't install correctly Dolby Advanced Audio v2 on the new SSD. The installation ends and Dolby Advanced Audio v2 is displayed in the list of installed programs, but at the end of the installation, the error message also occurs.

  (I followed exactly the solutions reported for other systems, but none of them worked for me. Please tell me in what order I should run the driver setup (s) for my E540 if you think that it is a source of possible error).

  I don't really know what could cause the error during the (apparently) accurate installation still work when starting from the original HARD drive? I would really really appreciate advice that could help me solve the problem.

  See you soon

  (PS: I speak not of Dolby Digital Plus, but Advanced Audio v2!) The Dolby Digital Plus the user interface is available on the SSD. The sound quality varies considerably between the two installations of Windows on the SSD and HARD drive and the loss of sound quality is unacceptable for me.)

  I found the solution to my problem in this thread:

  https://forums.Lenovo.com/T5/Lenovo-3000-and-essential/how-to-change-FOM-Dolby-Digital-Plus-interfac...

  Didn't think to try the Win8 pilot... my bad, but I hope this helps others.

• I can record is more than all of the new bookmarks after update to Firefox 40.0.2. I have over 1000 bookmarks and also use xMarks.

  I can record is more than all of the new bookmarks after update to Firefox 40.0.2.
  I have over 1000 bookmarks and also use xMarks.
  I tried to remove 5 bookmarks and save a new bookmark, but it does not work.
  When I click on the bookmark star, stars in the bookmarks folder jumps, but does not record, it does not offer the possibility of filing in the subfolder right it me and the star is not awarded (there should be one filled with stars when the Web site is updated bookmark)

  Thank you for your help. I tried the maintenance of places without success. I have disabled xMarks, but it made no difference, I couldn't save all new bookmarks. I went on the site help above and deleted the "places.sqlite" file and recreates a new file, but it didn't work. I uninstalled Firefox full using IOBit Uninstaller and reinstalled, but I found this program does not delete the profile folder (used to have a checked during uninstall of Firefox, but it seems to have disappeared in the latest versions). The problem persisted.

  Finally, I took a screenshot of all my addons. Then, I uninstalled Firefox again, then delete the entire folder profiles (located very usefully described in the second link above https://support.mozilla.org/kb/Bookmarks+not+saved#w_fix-the-bookmarks-file )
  I reinstalled Firefox, reinstalled xMarks and connected and transferred all my favorites, I reinstalled all my previous addons and ALTO - it now everything works perfectly!

  Thank you for your help

• My Satellite L850-18 t will support the new SSD?

  Hello

  I am seriously thinking to buy the new SSD which is SATA III. Currently, I have Toshiba Satellite L850-18 t, European model. And I think that (although that is quite difficult to get information) that the current HARD disk is SATA I.

  My question is, will the new SSD work correctly, it will take all the benefits (write and read speed) if I install it on the laptop? And if not, what SATA SSD do you recommend?

  I really need to empty it.

  Best regards
  Luka

  Yes, your Toshiba laptop support SSD. I have older machines, and there is no problem with SSDS.
  This is not complicated, you think it is.
  Check prices and buy one that suits.

  I can recommend brands like Toshiba, Samsung or Kingston. More info on SSD Toshiba you can find on http://storage.toshiba.eu/cms/en/index.html

  A friend of mine uses Samsung 840 Series SSD of base and it works perfectly. The new SSD, you can install original recovery image and start using your machine with factory again.

• G62 - 219CA: possibility to backup/clone recovery Partition just before installing the new SSD?

  I'm considering buying an SSD of 256 for my older G62 - 219 CA.

  I can sort of back up or clone JUST the recovery partition, so when I install the new SSD I can put back them there and have this convenience for later use?

  I can't close my b/c the entire hard drive SSD will be too small in relation to the original drive.

  Any ideas/suggestions would be greatly appreciated.

  ToddNS

  It is not really possible to save or to clone the recovery partition. Your best option is to create the support of HP recovery using the Recovery Manager or to order HP media to DVD - Windows 7 64B doublespeak (Office 2010) + Supp 1 Recovery Kit.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• Upgrade of Windows 8 the new SSD

  I just bought a new SSD & downloaded the upgrade of Windows 8 to replace my old XP legit.

  My intention is to install the Windows 8 upgrade on the new SSD.
  Could someone guide me?

  You should post and ask hep in forum Windows 8, it is for Windows XP.

  John

• Cannot restore the backup of the image to the new SSD, said player is not connected

  Windows 7-64 bits, hardware upgrade of the HP DM1Z.

  I have a computer HP DM1Z. "Home Premium" Windows 7 64-bit (again, as in Feb)

  I decided to replace the current hard drive 320 GB WD with an Intel X 25 - M 80 GB SSD drive.
  Initially, I bought Acronis ' True Image ' to do the download of the OS (the computer has not much on since it's new).
  Computer problem closing occurred. A few times my attempts. Acronis has been unable to solve this problem. I cancelled the Acronis.
  Decided to call HP. I did a 'clone' on 4 DVDs via an external DVD burner.
  I swapped hard drives.
  At startup, I've indexed PF9 & got the "Recovery Manager". Keyed "Minimizes Image Recovery" to re - install the operating system. Progress was halted when a pop-up "target drive is not connected". I tried this same routine with "Recovery System", and the end result is the same.
  With "HP support", I keyed PF10 and did a diagnostic test. The new SSD worked. "HP support" indicates problem was probably the Windows 7 software.
  I had checked the Microsoft Web site, and the Intel X 25-M is compatible with Windows 7, 64 bit.
  What gives? Registry software is with the motherboard, I think. Replace large GGB to small GGB SSD hard drives seem to be no problems from what I've read. What solution can there be? What I need to re-purchase the retail of Windows 7 to replace the OEM Windows 7 to make it work? This is not good.
  would appreciate help from anyone in this case. Thank you.

  Hello Terabushi

  To avoid confusion and because this thread is old, please start your own, new thread on YOUR specific problem and your computer. Indicate your current version of IE and the full version of Windows (for example, WinXP SP3;) Windows XP 64 - bit SP2; Vista SP2; Vista 64 - bit SP2; Win7; SP1 Win7; Win7 64-bit. Win7 64-bit SP1) in your first post. Thank you.

  How to start your own, new thread
      http://answers.Microsoft.com/en-us/page/FAQ#faqGettingAnswers5

• Have on current PC, Win 7 64 bit CS5; How to get *.exe to transfer to the new computer after removal of old

  Have on current PC, Win 7 64 bit CS5; How to get *.exe to transfer to the new computer after removal of old?

  https://helpx.Adobe.com/Creative-Suite/KB/CS5-product-downloads.html

• Upgrade of equipment and went from XP to Win7 - how do I transfer/install CS5 on the new SSD?

  I've recently updated the workings of my computer; new mobo, Samsung SSD (solid state drive), CPU and ram. Continued XP Pro Windows 7 Pro with Win 7 Pro now residing on the new solid state drive. I still have the old 1 TB Serial ATA hard drive connected as a storage device, and that is CS5. But of course my CS5 applications are now unusable.

  Can someone please give me some advice on how to transfer the old HD (XP Pro) CS5 installation for the new SSD (Win 7 Pro)? I started to do some research and reading on the first "off-setting" CS5, but I can't open any of my CS5 applications to 'disable '. So I'm puzzled. I am reluctant to try a new installation of my disks in CS5, until I learn the regular procedure...

  Any advice would be greatly appreciated.

  Dave F. in Rhode Island

  do not transfer, reinstall.

  If you need to reset your activation meter, contact adobe support - http://helpx.adobe.com/x-productkb/global/service1.html

  Downloads available:

  • Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
  • Acrobat: XI, X | 9,8 | 9 standard
  • Premiere Elements: 12 | 11, 10 | 9, 8, 7
  • Photoshop Elements: 12 | 11, 10 | 9,8,7
  • Lightroom: 5.5 (win), 5.5 (mac) | 5.4 (win), 5.4 (mac) | 5 | 4 | 3
  • Captivate: 8 | 7 | 6 | 5
  • Contribute: CS5 | CS4, CS3

  Download and installation help links Adobe

  Help download and installation to Prodesigntools links can be found on the most linked pages.  They are essential; especially steps 1, 2 and 3.  If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".

• Where is CS Web Premium 5.5 for re - download, then install on the new computer, after the death of the former

  Where is CS Web Premium 5.5 for re - download, you need to install on the new computer, after the death of the former is not under my orders help

  Direct download links for Adobe software

  Mylenium

• Reinstall Windows 7 on new SSD after failure of hard disk, damaged, incomplete product key

  I have a HP Pavilion.  The HARD drive recently failed completely, no possibility to recover data at the moment.  I ordered a set of HP recovery disks, but they seek the recovery on the HARD drive partition; There is no such partition that I replaced the HARD original with a new SSD drive.  To make things worse, the place that HP has chosen to put the Microsoft product key sticker resulted in the product being partially faded key.

  So, to summarize: HP not Pavilion with a corrupt OEM HDD and so far no data recovery possible. a new SSD with no partitions on this subject; a set of recovery disks from HP that don't just work; a sticker with the product key with the first two digits of the product key (as well as some of the barcode, etc.) rubbed off because they have chosen to place the sticker on the bottom of a working computer instead of, say, under the battery, it can be protected.

  If someone in the community has a suggestion as to how to install Win 7 (must be 7 on this system, cannot be an iteration of 8 or 10) from scratch, without having to buy it and with a corrupt OEM disc and a partial product key, I'd love to hear it.  Maybe it's time to install Debian on it?

  Ahh, this is the crux of the problem... the bootmgr is missing.

  To restore the windows off the factory restore DVD, you must configure the BIOS to use the DVD drive as the primary boot device. The machine will then start on the first DVD, and you will not get the above message.

• The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The new App Store for El Capitan update has locked up my macbook pro.  Reboot got about 3/4 fact and the machine stops. Turned off the power and turn it on again for nothing doesn't.  How in my machine to begin troubleshooting?

  The problem is most likely an attempt to update a system malfunction prior it is probably a problem with your computer, not the El Capitan.

  Start by:

  Reset the PRAM and NVRAM on your Mac.

  MacIntel: Reset of the controller (SMC) system management

  Start in Safe Mode , and then re - start normally. It's slower that a normal start, so be patient.

  If you are unable to start;

  Reinstall El Capitan without erasing the drive

  Please make sure that you back up.

  1. Restart the computer. Immediately after that the chime hold down the command and R until the Utility Menu appears.
  2. Select disk utility, then click on the continue button.
  3. Select the withdrawal (usually Macintosh HD) entry of the volume in the list aside.
  4. Click first aid icon in the toolbar. Wait until the button is active, then click it.
  5. Quit disk utility and re-enter the Utility Menu.
  6. Select Reinstall OS X and click on the continue button.

  Also, see this tip for user: basic steps for the OS X upgrade.

  If this doesn't get you;

  Install Yosemite or El Capitan, from scratch

  Backup if possible before proceeding.

  Restart the computer. Immediately after the chime hold down the command and R buttons until the Apple logo appears. When the Utility Menu appears:

  Select utility disc in the Menu Utility, then click the continue button.

  When loading disk utility, select the volume (entered into withdrawal, usually Macintosh HD) from the list of devices.

  Click Delete in the main window of disk utility. A panel will fall.

  Define the type of Format Mac OS extended (journaled).

  Click on the apply button, then wait for the done button to activate and click on it.

  Quit disk utility and re-enter the Utility Menu.

  Select reinstall OS X and click on the continue button.

• Hello. You will need to update Mac OS El Capitan. Currently have v.8 CS Photoshop and Lightroom 2 v.2.4. In order just to work with the new operating system, please inform for updating both.

  Currently have v.8 CS Photoshop and Lightroom 2 v.2.4. In order just to work with the new operating system, please inform for updating both.

  Hi R0w1% 40nd,

  Adobe Photoshop CS v.8 and Lightroom 2 v.2.4. are very old software and the operating system you are using is the most recent, so there may be compatibility issues that adobe has not tested these applications on newer operating systems.

  The installer for Adobe Photoshop CS v.8 and Lightroom 2 v.2.4. are no longer available.

  You can see the creative Cloud, creative cloud and rates membership plans | Adobe Creative Cloud

• I am running Acrobat 9 Pro (9.5.5).  Do we not have to buy the new version if we have never updated?  Or we have the right to upgrade to the latest version.

  I am running Acrobat 9 Pro (9.5.5).  Do we not have to buy the new version if we have never updated?  Or we have the right to upgrade to the latest version.

  I'm not really clear on the intent of your question.  If you can get the latest version you want to buy it.  When you go to buy, you should be able to see if it has an option to buy an update of the version you currently have.  I can't find the purchase page to check it out myself... I can only find the subscription option.