The default recommended settings for Windows for Windows 7 firewall is good enough?

Similar Questions

• How can I change the default font settings in windows?

  Today

  Take a look in the display properties, appearance, advanced

• BIOS does not detect not hard drive for laptop after the setting of the default BIOS settings.

  I had my 14.04 installed Ubuntu in my laptop in a reader named «Notebook hard drive» a pre-installed Windows 8. Today I put the default BIOS settings in my phone and when I rebooted it and tried to use Ubuntu by pressing 'F9' key and choosing from the menu of the BIOS I found my 'Notbook HDD"option missing. My disk of Ubuntu is still there, but I have no way to access it. Is there a way I can get it to work?

  Try turning off secure in the BIOS and then start by restarting the laptop.

• I use windows 7. How to change and be sure the default column width in Windows Explorer

  I use windows 7. How to change and be sure the default column width in Windows Explorer

  Hi Jimsw,

  ·         If it works well before?

  ·         You did changes to the computer before the show?

  Explorer Windows will remember changed settings, check if this not happen as planned.

  Follow the suggestions below for a possible solution:

  Method 1: I suggest running the fix of the article and check if it helps.

  Diagnose and repair Windows files and folders problems automatically

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 2: You can increase the width of the selected columns and apply the settings to all files and check.

  a. right click on an empty space in the Windows Explorer, click on sort by.

  b. now, enter the size required in the Pixel with and click OK.

  Now, click on the drop down menu to organize and click on folder and Search Options.

  Click view and click apply to folders and click OK.

  I hope this helps.

• I'M ON A WIRELESS SYSTEM TO RUN FAST, NOW I'M I'VE SEEN TROUBLE STREAMING MOVIES AND EVEN VIDEOS ON YOU TUBE, CAN SOMEONE ME USING THE ADVICE ON SETTINGS OF WINDOWS VISTA?

  I'M ON A WIRELESS SYSTEM TO RUN FAST, NOW I'M I'VE SEEN TROUBLE STREAMING MOVIES AND EVEN VIDEOS ON YOU TUBE, CAN SOMEONE ME USING THE ADVICE ON SETTINGS OF WINDOWS VISTA?

  Hi GrahamCroal

   

  1. is the streaming of films and videos slow down or you are totally unable to broadcast their?
  2. what exactly happens when you try streaming?

   

  You can check if the below link help-

  http://Windows.Microsoft.com/en-us/Windows-Vista/which-protocols-does-Windows-Media-Player-use-for-streaming

   

  Also the connection speed must be higher than the data rate of the content you read to discover Fast Streaming. The faster your connection, the better your experience will be. So it depends entirely on the broadband connection you are using and speed offered by the connection. If you want faster streaming then you need check the high-speed broadband connections. You can communicate with the internet service provider for more information about the same thing.

  I hope this helps.

• My question is how to open the system advanced settings in window 7 64-bit home preuim

  My question is how to open the system advanced settings in window 7 64-bit home preuim

  Hello

  Assuming you mean the Windows Advanced System Settings screen, then right click on my computer and choose Properties.  On the left side of the screen, you will see a link for the advanced system settings.

  You can also call directly my pressing the windows and R key (which will bring up the Run dialog box) and typing in control sysdm.cpl

  I would like to know how you, or if you want to say something else.

  Good luck & enjoy Windows 7
  Jon

  If this message was useful and allowed, please consider the vote and it offers as a response...

  My Blog - www.insidetheregistry.com

• I want to know what is the best possible settings for energy management software.

  Hey

  I just buy lenovo b 570 e dual core laptop.
  I want to know what is the best possible settings for energy management software.
  Secondly, I want to know b 570 e score if one is to use it.
  Thank you
  concerning
  Nadine
   
  Original title: lenovo B 570 e dual-core

  Hi Nadia,

  I suggest you to use your favorite search engine to find the best possible settings for energy management software.

  If you are referring to the Windows experience index, I suggest you follow the links below and the update of the status of the issue.

  What is the Windows experience index? :

  http://Windows.Microsoft.com/en-in/Windows7/what-is-the-Windows-experience-index

  Windows experience index:

  http://Windows.Microsoft.com/en-in/Windows7/products/features/Windows-experience-index

  I hope that the information above helps you.

• What is the best 'color settings' for documents 4 colors Photoshop 9.0 for eventual printing on a printer? Thanx

  What is the best 'color settings' for documents 4 colors Photoshop 9.0 for eventual printing on a printer? Thank you, Scott

  The 'best' color settings are profile and end points specified by your lithographer. You can see that the work will be produced in CMYK mode, it can specify a RGB. (One of the reasons why it might ask for an RGB file and perform the conversion itself is so that it can prevent its competitors its CMYK settings that apply to the GCR, generation of black [ramp] and limit of total ink regarding specific paper.) Its recommendation may also vary depending on your choice of paper and the surface of the paper. If the choice of the particular lithographer cannot be done at this time, it is generally acceptable to provide the Adobe RGB file with the default settings of Photoshop.

• What are the best export settings for a first Pro CS4 video HD?

  Hello!

  I had so much trouble with this issue and that's something that continually frustrates my boss. I have a HD video what are the settings for it

  23.98 FPS

  1920 x 1080, then a few lines down he says 1408 x 792

  16-bit,

  2 channels

  48000 Hz

  What should be the parameters when I do a new sequence?

  When I look into the window in Premiere Pro I constantly have to "shrink" the image to fit the window, is that something I should do or he says that the configuration of the sequence is bad?

  But more importantly what should be the parameters of export? I exported a long video of 4 minutes and the size was 1 GB, I know that it's too big.

  I need to export without losing quality and export another one which is consistent with the limits on the size of Youtube and Vimeo.

  Vimeo is 500 MB per week, sometimes I download 4 videos per week. I think that Youtube, you can download 500 MB at a time.

  I need to get the smaller size with lose the least possible quality AND the best export quality settings, so I suppose I have 3 separate issues.

  What are the best settings of sequence for HD video?

  What are the best export settings for HD without losing quality?

  What are the best export settings for the size of out about 500 MB with losing the least possible quality?

  Thank you!

  http://forums.Adobe.com/thread/713070

  On the thread that above, I used the 5th anwer, and it will take about 7 hours to export a 4 minute video :/

  All your questions are answered here.

  http://forums.Adobe.com/community/premiere/faq_list?view=discussions

• How can I change the default DVD drive in Windows 7 pro?

  How can I change the default DVD drive in Windows 7 pro?

  The following did not work.
  1 Control Panel / autplay
  It only allows me to choose media player or nothing

  2 Control Panel / default of programs
  -file types associations do not change the automatic boot to DVD drive
  -the default programs watch only with no. microsoft applications add option application
  -access and default computer program; This made a mess when I tried not microsoft!

  3. computer / rt - click the device DVD did not help there is no command 'open with '.

  You might have switched to the control panel view all items.
  Click Start > default programs and click Change AutoPlay settings. -Ramesh Kumar http://www.WindowsValley.com

• Where can I find the ability to change the com port settings in Windows 7

  Where can I find the ability to change the com port settings in Windows 7

  Port, Device Manager, select comport, right click, properties, Port settings

• How can I fix the gap between the default project settings and the music video

  I'm building a DVD in yet CS6, and some of the images you want to fragile/wobbly preview and after that I have burn to disc.  I think it's because the images were shot at 24 fps, progressive and native transcoding for standard def DVD settings are 30 frames per second, interlaced scanning speed.

  I could not change the default conversion settings, and research online, I did, it seems that those who are set in stone. I was able to modify the project settings to export a lot of my images, but it did not help the problem. Nor do transcoding the video clip.

  The project was originally shot on two cameras - a Canon 5 d Mark iii and a Panasonic GH2. Images of Canon has no problem. Only the GH2 images seems wobbly preview and make. I edited the video file in Adobe Premiere Pro CS6, and then exported to MPEG to DVD at 24 p, set NTSC high quality large screen. Any ideas on how to solve this problem?

  Editing mode: QuickTime DV NTSC

  There is your problem.

• restore the default permission settings in vista

  How to restore the default permission settings in Vista

  I had problems sharing files and went to different media pages, mainly integrated ones. I changed the user permissions and tried to add the user on the Security tab, but I must have done something wrong. 128-bit encryption seems to be lost. Maybe it's that everything that triggers this file was transformed into a "read only" file (which has happened to another file, I've tried to share). Any help will be appreciated.

  Hello

  To reset security settings back to default, take a look at the following article:

  http://support.Microsoft.com/kb/313222

  • Click the ball to Start .
  • Under Search, type cmdand press ENTER.
  • Type the following command, and then press ENTER:

  secedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose

  You receive a "task is completed" message and a warning message that something was impossible. You can ignore this message.

  Brent
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I get a 0x80070424c error Code when I try to use the recommended settings for my Windows Firewall

  My PC suddenly stopped sharing music to my Xbox over the 3 days.

  My firewall is weird and it is said that "the Windows Firewall does not use recommended settings to help protect your computer.

  When I click to use the recommended settings, I get an 0x80070424c error Code. I tried following the steps here: http://support.microsoft.com/kb/968002 and it did not work

  Hello

  If you are having problems turning on Windows Firewall, follow these instructions:
  Download and install Windows Repair: '
  http://www.bleepingcomputer.com/download/Windows-repair-all-in-one/
  When repairing Windows opens, click the tab for Startup Repairs click Start. Clear all check boxes except for the following four:

  -Reset the registry permissions

  -Reset the permissions of files

  -WMI repair

  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer.
  I hope this helps you.
  Brian

• What should be the port/security settings for Windows Mail with Vista - I think they changed?

  I had to reinstall Vista when my hard drive crashed, and Windows Mail does not work completely correctly. I think remember me an email from Microsoft told me to change the ports/security settings. Could someone tell me what they should be?

  A "error message indicating", what exactly? No error code or the relevant text?
   
  Make sure these settings match exactly.
   
  Set up Windows Mail for E-mail XFINITY/Comcast
  http://customer.Comcast.com/help-and-support/Internet/configuring-Windows-Mail-Xfinity-email
   
  
  Leave messages on the server and it clutter?