The device 'Generic Volume' cannot be stopped now. Try stopping the device again later.

Similar Questions

• Impossible to disconnect, receive error message "THE DEVICE 'GENERIC VOLUME' IMPOSSIBLE BE STOPPED RIGHT NOW"

  "I CAN'T DISCONNECT MY SEAGATE EXTERNAL DRIVE I GET A MESSAGE SAYING 'THE DEVICE' GENERIC VOLUME ' CANNOT BE STOPPED NOW, TRY THE STOP DEVICE LATER, HELP PLEASE

  Hello

  · What is the service pack installed on the computer?

  · Do you remember any recent changes on the computer?

  Follow the steps listed in the link below: problem ejecting USB Mass Storage Device: http://support.microsoft.com/kb/555665

• Error: We are unable to connect now try again when you enter the product key

  Hello! Well, I have a product key for windows 8 I download the installer of windows 8 Microsoft and when I get my product key, it is said that it is correct and I click Next, then it loads and gives me a network error "' we cannot connect you now try again" or something. " What should I do?
  
  Origin 8 title: windows install!

  You're right, it should not block.  Is it possible to disable it temporarily to test?

• I get the message 'the' device name' cannot be stopped because a program accesses still it."when using safely remove hardware program.

  Trying to read an external drive "Xcraft", by chance the power supply cable was disconnected. I ' v ereconnected the cable and try to remove the device using the ' renove safely» The unit is not stopped after selection and | I get the message 'the' device name' cannot be stopped because a program is accessed again. ' Y at - it patches or wrap-around work. Just, I can't access the drive. Appreciate any help.

  Try this and see if you can get it to unlock. If it does not just try to restart your computer without USB drive.

  The download is from Microsoft so it's safe!

  Good luck!  Please rate me upward if you find my post helpful. Thank you!

• Understanding and getting rid of the list of devices of "cliché generic volume snapshot.

  Under devices, I have a list of 40 generic volume snapshot: How can I get rid of them and what is everything?

  Hello

  Please read this on Volume Shadow copies: http://en.wikipedia.org/wiki/Shadow_Copy Best of Luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Problems of Defrag - defragment suddenly stops indicating that some files on this volume cannot be defragmented

  When I try to defragment my computer, it suddenly stops indicating that some files on this volume cannot be defragmented. A way to solve this problem? I made the center of Fix-It without solving the problem. Anyone with a fix?

  Before defragmentation utility to run Disk Cleanup. Some files cannot be defragmented, because they

  are in use... To solve the problem, open the file system, advanced, performance,

  swap file, click on the button 'Edit' L.click on the C: drive, the value "no page file" click on set 2 X,

  close, restart the pc... Go back to xp, in run, type: cmd cmd type: Defrag C:

  Once her thru, type: EXIT reopen system, set C: "let the system manage", click on set 2 X,.

  close, commit to rewrite a new file, restart the pc.

  It works best if you have a 2nd HD installed with a pagefile on this too, in the form of windows

  requires a file permanently...

• When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  When I try to install Firefox, I get an error "could not open the output file. I used Firefox before and it doesn't work anymore, so I uninstalled. Cannot re - install now.

  This has happened

  Each time Firefox opened

  I tried to download firefox.

  User Agent

  Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Windows NT 5.1; SV1; AntivirXP08; GTB6.3; .NET CLR 2.0.50727; MS - RTC LM 8)

  When you click on the download link on GetFirefox.com, you should be asked if you want to run or save the file. If this situation occurs when you try to run the download, try instead to record and put the file on your desktop or in a similar place, where you are certain that you can find.

  When the download is complete, try double-clicking on the downloaded file in the normal Windows Explorer (browse your way to the file from the desktop). This should start the installation.

  If, in the Explorer window, you notice that the file seems to be missing the Firefox icon orange/blue, right click the file and select Properties. The image should look like the attached picture (except that mine is in Danish, but that is irrelevant) if saved correctly - if it don't look like this, would you please describe the content or attach a screenshot of the box. Especially what it says under "File Type" - it must be 'program '. If this isn't the case, will have to focus on what could be the problem here.

  A bit off-topic, your Internet Explorer seems to be quite a bit outdated (IE 6, where the current version is IE 8), so I highly recommend that you try to run Windows Update to get your system up to date. Is it as a society (such as a thin client Terminal Server computer) system, this is not possible, and most likely, your system administrator will have to help you.

• The system cannot open session now because the domain is not available

  Hello

  I met the problem of windows cannot open a session after I installed the MicrosoftFixit50588.msi.

  I need to turn on the CredSSP and download & run the site MicrosoftFixit50588.msi Web [url] http://support.microsoft.com/kb/951608/en-us [url]

  He asks to restart the PC after the installation is complete. After that I restart my pc and I could not log on to windows and get the error message "the system cannot open session now because the domain is not available.

  the user's machine: Winsows XP Pro SP3

  Anyone know how to fix this? I urgent need, thank you.

  Kind regards
  Grace

  Hi Grace,

  1. is the computer connected to a domain?

  2. are you able to boot into office?

  I suggest you follow the link below and check them with the question:

  The system cannot open session now because the domain is not available:

  http://support.Microsoft.com/kb/824302

  I hope this helps.

• the system cannot open session now because the domain d57jz6d1is is not available

  IM computer work for someone elis I get this error (the system cannot open session now because the domain d57jz6d1is is not available) when trying to open a session even in safe mode has the computer versions xp with sp2 on it it is a mistake to real windows or if someone know a work around for help would be appreciated.

  The cached credentials are limited or their expiration, you must connect to the domain to log on or you need to log on with a local account.

  John

• Cannot install After Effect free trial, the page shows "that we are now some questions, please try again later." If the problem persists, contact customer support. "for several days.

  Cannot install After Effect free trial, the page shows "that we are now some questions, please try again later." If the problem persists, contact customer support. "for several days.

  Is this problem will soon be resolved? Thank you!

  You MUST have a 64-bit computer and operating system... What is your computer?

  -Programs are supposed TO not view or download if they are not installed on your computer

  MINIMUM for After Effects and Premiere Pro http://helpx.adobe.com/premiere-pro/system-requirements.html

• Error, 'we cannot connect to the market right now. Check your data connection or try again later. »

  my market is not working. It is said WE could NOT CONNECT to THE MARKET NOW. CHECK YOUR LOGIN DATA OR TRY AGAIN LATER. my data connection is fine I can browse the internet and use other apps as well but just failed to connect to the market, even if it worked well here tomorrow

  He began to work himself, without doing anything :)

• I created a link to the files on my cloud account and now cannot open it I get this message "we're sorry, there was erred retrieve this asset sharing status.» Please try again later. "and I can't create a new link

  I have a folder containing 14 files in sync and have created a link to them using "create a link" - it gives me the link to send and enter an email address, it sends the link - but when I go to a browser and try to view the link I get this message "we're sorry, there was erred retrieve the State of Division of assets." "Please try again later."  and now impossible to create a new link that work - files are synchronized and well - it's a common problem

  We pushed a fix direct and verified for many customers. If you still encounter an answer please problem.

• Safe USB removal message, "...". cannot be stopped because a program is accessed again. »

  Trying to 'remove hardware safely' (a USB flash or hard drive), I get the message "the device" USB 2.0 Flash Drive USB Device' cannot be stopped because a program is accessed again. "."  I suspect this MAY started when a previous USB drive fails or has been incorrectly disconnected.  I have no problem to access USB devices, but they will not remove safely.  Any ideas to fix this?

  This is often caused by the system restore as it tries to create restore points, make sure that the system restore is not enabled on removable disks, System Restore should only monitor the volume of Windows startup.

  John

• print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now

  print job is stuck that pf HP psc 5210 series, will not erase Paul job, cannot print anything now

  I have a printer HP psc 2510 series deskjet.  Print many documents, it has notified me that I was low on ink which I was aware of.  I had a little more what to print, and chose the young project option for printing of no more than 1 to 3 pages.  I constantly tried to cancel the job that kept the origin of the printer show (not answer).  It aligned to the top other jobs, but after trying to delete all, printer then turn on again, it still shows the original print job, and I'm unable to find a way out of Quebec

  Verification of updates, there are only two listed as "optional" still thought by downloading them, it can solve the problem.  It does not; He gave the error message on the print job in that causing a feeling of power.

  I've never seen this before; I was always able to plug & play on my desktop printer and trying to use it on my Sony VAIO VGN-NW310F series.

  It is imperative to get this resolved.  School assignments are due and professorts not only does not want to hear the excuses of any kind, printing problems have always been easily resolved so far.

  Please - I need immediate assistance.  I already used the troubleshooter printer online which, as said earlier custody indicating the print job to Québec, is causing the printer to not answer.  I cancelled each time, but it will not go away.  I turned off the printer, reinstalled in the hope it would be empty, but it will not.

  I appreciate your atttention guest on this subject.  I work with Windows 7 Home Premium 64 bit operating system.

  Thank you for your help.

  Robyn Drake

  E-mail address is removed from the privacy *.

  Try in Services, locate the printer spooler, select it, and then stop the service.

  Then check if you can delete the print job, if so restart the service

• Server cannot be stopped

  Start the server from the servers view works fine. When I click on the server 'Stop' button, I get the following output in the Console view:

  "tai" kann syntaktisch an dieser Stelle non detailed werden.

  The point of view of progress shows just "stop the server...". (92%) ». After a while, a message box appears telling me that the server does not respond, and if the server must be closed. When I click 'OK' the server still continues to operate. Then a few minutes later I get a message error "the server cannot be stopped in timeout".

  
  The only chance I have is to complete the process in the Task Manager. It is not acceptable in the long term, as there are other java.exe process and I have to guess the right one.

  I'm on Windows and I have an own March 4.5.1 Eclipse with the latest tools of Oracle WebLogic Server (8.3.1.201509041831) on the Marketplace. I already tried to remove and add the server again as well as to create a new domain.

  How can I fix? What happens when I click on the stop button? Y at - it a script called who I try to call my self? Or more detailed logging can be turned on somewhere? This is my first try running a server Weblogic, I don't know these things, but I'm a little frustrated just know for this reason.

  I found the problem. To meet the strategy of password, I used a password generated secure password. This password contained the following string: "Yolen) tai'." After changing the password, the server may be down now.

  Seems that you shouldn't be able to supports in passwords. And in my eyes, this is a security problem to print parts of password for the console. Maybe you can solve these two issues.