The digital camara con problemas.

Similar Questions

• Problem with the digital signatures of workers govt

  If I get emails quite frequently NAVAIRSYSCOM workers via my e-mail from work which is the right company, no Government excuseraient. On my last phone an orginal Droid, a few emaisl would tell me there was a problem with the digital signature for e-mails, but I always saw the e-mail itself.

  Since switching to the Maxx HD, I can see no longer the body of emaisl to these people. All I get is a "impossible to decrypt this message." It is not every person govt, but enough that it is very frustrating. Any ideas on how to work around this problem? and I know that the message is not encrypted, I can see fine by Exchange and we are app.

  We have a couple of our team focuses on similar issues. Passing this along.

• Problem with the digital data to write VISA function

  I have a GE's PowerPC that is running on the VxWorks operating system. I have a tornado application where I run my C code to generate a file .o & .out, then I empty image .o files & .out for PowerPC via FTP, now I need to communicate with PowerPC of LabVIEW (via serial communication using VISA vi) using the VxWorks controls. When I enter orders VxWorks in LabVIEW

  That is to say for Eg: 1 > ls --> the contents of a directory list IE .o & .out files. The problem I'm facing here is, when I run the vi, I am able to read the file in the box to read the string but keep files on speeding up juice,

  2 > ld <> --> load a module object in memory. I face the same problem here.

  3 > then I need to type the name of funtion main c program, after which I can give input to the program.

  4 > I need to enter numeric data as inputs to my program. but the write VISA function accepts the only input string and read VISA function gives only out of string... I want to give digital entries and read the digital output.  Any help would be appreciated.

  Hi Luke,.

  You can try with this reliable hyperterminal VI.

  http://lavag.org/files/file/172-hyper-Terminal/

• Error - Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Cannot read any DVD.

  Original title: unable to play any DVD

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I tried to update all the drivers but the problem persists

  Hi Neil,

  1. have you made any hardware changes or software on the computer before this problem?

  2. what version of windows Media Player do you use?

  You can follow this link & check if the problem persists.

  Windows Media Player Error Message help

  
  Reference: How to troubleshoot issues that occur when you play a DVD in Windows XP?

  Hope the helps of information.
  Please post back and we do know.

• I want to use the digital books from the library, but Explorer encounters a problem and needs to close when I try to get the security update.

  I want to use the digital books in the library. When I try to use the link below to get the media player update security, as soon as I got to the page, I get a a get several times the same error - Internet Explorer has encountered a problem and must be closed and the page goes dead. Explorer trys to regen of the page, but it keeps getting an error. What should I do now?

  You can download the upgrade of Windows Media Play Security 2.5.0.1 under the following link.
  
  The security component upgrade
  http://drmlicense.one.Microsoft.com/Indivsite/en/indivit.asp

  Hello

  Follow the steps below and check, if it helps:

  1 reset the management of digital rights (DRM):

  a. Click Start, click Run, type explorer.exe and then click OK.

  b. on the Tools menu, click on Folder Options and then click the view tab.

  (c) in the area of advanced settings, under hidden files and folders, click Show hidden files and folders.

  d. clear the skin protected operating system files check box and then click OK.

  e. Locate the DRM folder on the hard drive. The DRM folder is usually located at the following location: C:\Documents and Settings\All Users\DRM Windows

  f. rename the folder to DRMbackup DRM.

  2 remove the DRM registry key:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How do I back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  a. close all open Windows Explorer Windows.

  b. Click Start and then click Run.

  (c) in the Open box, type regedit and then click OK.

  d. look for, and then click the following registry subkey:

  e. HKEY_LOCAL_MACHINE\Software\Microsoft\DRM

  f. remove the key and restart the computer

• My laptop is windows 7 and with most of DVD it says that there is a problem with the digital copy. I'm also having trouble changing the region

  the exact message is: "windows media player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card. When I click close it comes with this another message saying that my DVD system is set to the region one and I need to change it to region 2. I have change for the region, but he said: "Windows Media Player cannot play the DVD because the disc prohibits playback in your region of the world. You must obtain a disc that is intended for your geographic region. ». I don't know what to do.

  There is a chance that the free VLC Media Player
  would be to read your DVD without changing the region code.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  VLC Media Player
  http://www.filehippo.com/download_vlc/
  (works on XP/Vista/7)

• Problem: Windows media Center Configuration connection to the digital cable box.

  I have HP Pavilion Elite with Windows Home Premium.  How do I get the library to accept the signal from the digital decoder (without additional I.R.).  The signal passes through fine using the S-video input, change channel with the cable, but 'Set up' box control requires I connect "I.R. Blaster (?) covering the cable box sensor which then beats command of other devices (television, etc.) using the cable box.

  Hi M.G.Nichols1945,

  What is the exact message that you receive?

  You can follow the steps mentioned below to setup windows media Center without using hardware IR (infrared):

  1. open Windows Media Center and go to tasks > settings > TV > Setup TV Signal

  2. click on Yes to the question that appears.

  3. click on the default settings in the wizard until you get to the option where it asks if you want to configure your signal automatically or manually.

  4 choose think I will manually configure my TV Signal

  5. Select antenna; Choose analog only antenna after you go through this return to TV settings and click Finish.

  6. now, you should have your installation center media without the use of IR material. You must use the cable box to change channels

  You can follow the instructions of the manufacturer of your computer to set up your Digital Cable Ready tuner. So that the Digital Cable Ready tuner receive cable content, your computer must be a specially identified Digital Cable Ready computer.

  For more information, see the link below:

  Set up a TV signal in Windows Media Center
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-TV-signal-in-Windows-Media-Center

  TV on your computer: understanding signals TV and TV tuners
  http://Windows.Microsoft.com/en-us/Windows-Vista/TV-on-your-computer-understanding-TV-signals-and-TV-tuners

  Solve problems with watching TV on your computer
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I can't play DVDs in Windows Media Player 12 on Windows 7 Pro and get this error msg: Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  Hello, thanks for reading and helping me.

  I try to play a legitimate, belonging to DVD, but Windows Media Player 12 will not play on my computer Windows 7 Professional.  The DVD worked a few days ago, but all of a sudden, I get the following error message:

  "Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD player and the video card protection decoder. Try to install a driver available for your video card.

  I did a lot of research of these forums and on the ' net.  Here are the suggested steps I tried without success:

  • I tried VLC player.  This works.  However, rather than use this workaround, I wish to find a solution to my problem WMP/WMC.
  • I tried several DVD for years over the last decade.  These DVD works on my laptop, also running Windows 7 Professional and the shark 007 codec.
  • I uninstalled my Shark 007 codec
  • I tried other codecs (K-Lite)
  • I assured that the latest drivers are installed on my video card, XFX ATI Radeon 5850
  • I tried to uninstall Nero 9
  • I tried to use the Windows 7 troubleshooting options:
  • > Reading and burning CD, DVD and Blu - ray (no problem)
  • > Windows Media Player DVD (no problem)
  • > Windows Media Player Settings (detects a problem, wants to restore factory settings, every time, no matter what happens)
  • A system restore to a time when the DVD was working did not resolve the issue
  • The different links in Microsoft, I found in this forum about this problem do not seem to be useful.  There is a link that points to the set-top boxes, but this page just says: "Windows 7 comes with a decoder.
  • I assured the latest driver is available by going to "Device Manager", right click on the drive, then click on "update driver software".
  • I assured that the latest firmware is installed directly from the manufacturer's website.
  • I tried to reset my DRM by renaming the DRM under C:\ProgramData\Microsoft\Windows folder and by going to this Web site to upgrade:http://drmlicense.one.microsoft.com/Indivsite/en/indivit.asp?force=1
  • I've uninstalled and reinstalled Windows Media Player 12 and Windows Media Center via the function "functionality in Windows.

  I would be very grateful if a Microsoft technology could chime.  Thanks for your help!

  MY COMPUTER:
  DVD drive: TSSTcorp CDDVDW SH-S203N ATA Device (Samsung)
  Driver: Microsoft 6.1.7600.16384, dated 06/21/2006
  Graphics card: XFX ATI Radeon 5850 Black
  Motherboard: Gigabyte GA-X58A-UD3R
  Processor: Intel i7-920

  -Intel i7-920, Corsair 6 GB of RAM, ATI Radeon HD 5850, Gigabyte GA-X58A-UD3R, Corsair 800 d case

  Hello

  Try this free program:

  http://www.DVDFab.com/passkey-Lite.htm

  Carlos

• The laptop recovery Toshiba Satellite L505-S5997 problem error: Windows cannot verify the digital signature for the drivers required for this device

  I have a Toshiba Satellite L505-S5997 computer laptop and my hardrive recently crushed, impossible to restart.  I installed a SEAGATE 500 GB/sata/GO 16 MB of Cache, 7200 RPM hard drive. I ordered recovery for the computer disks and many of the drivers will not update or install without error that tells me that "Windows cannot verify the digital signature for the drivers required for this device. A recent hardware or software change might be installed a file that is signed incorrectly or damaged, or maybe it's a malicious software from an unknown source. (Code 52) "error.  Also, when I try to update Windows 7 I get the ' Windows Update cannot currently check for updates, because the service is not running. "  You may have to restart your computer. "When I try to download the service pack from the Web site it is usually interrupted with another error.  I tried to go to the Toshiba website and download the drivers needed and utitilities but nothing seems to work.  I am at a loss to try to seek and find a solution.

  Are you sure that the original problem was caused by a failure of the HD, did you test that the hd with the utility bootable disk from audit?

  As if you reinstalled to a new HD using that the required all defined recovery Tosh disk drivers would have been installed in this process.

  Assuming that Tosh then rebooted successfully after recovery, windows update would have run some important updates automatically. If that failed then it would seem that something is happening with your system.

• After you have uninstalled an editor audio wave cushion, my DVD stopped playing with the error: because there is a problem with the digital copy between your DVD drive decoder and video card protection.

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  my dvd will not play after you have uninstalled an editor audio wave pad. Is there a way to fix my dvd without reinstalling the program? I received the following message, (Windows Media Player cannot play this DVD because there is a problem with the digital copy between your DVD drive decoder and video card protection. Try to install a driver available for your video card).

  ================================================
  If the uninstallation of software caused the problem... it may be worth trying to
  do a system restore to a time before the software has been uninstalled:

  Windows 7 system restore: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

• Hello, I have problems with the digital signature on the software. It displays the error message: 2148073510. Could someone help me?

  Hello, I have problems with the digital signature on the software. It displays the error message: 2148073510. Could someone help me?

  Hello

  I would ask you go through the next thread once and see if that fixes the problem.

  Error 2148073513 when you try to digitally sign Acrobat 11 standard

  Concerning

  Sukrit diallo

• By pressing the digital Crown is Unresponsive

  I am pressing the digital Crown and he is not put in place the main application screen. It was fine this morning, but now he has problems. I have not yet used and now when I press the Crown he is nothing, or if I double - tap the button it brings to the top of the screen of the app, but with a lot of delay. What is going on? If it's important, the operating system is up-to-date.

  Hi Alex

  It may be useful to restart your Apple Watch: press and hold the button side until you see the cursor off the power; Drag the slider to turn off; Press and hold down the side button until you see the Apple logo.

• Is it save to use the digital output as a digital input for another channel signal

  Hi all

  I know it's a stupid question, but I don't have another generator of signals by hand. What I want to know is, can I use the signal digital output of my USB-6001 as an input for the same signal device, but on other digital port? I wasn't directly because I don't want to burn the device...

  Thank you

  Done all the time. No problems.

• color of the digital meter ramp or slide is missing the performance

  Hello

  I, m using CVI 2010 (10.0.1. (419) on windows 7-64 bit.

  In a simple program, I use a digital meter. I also use the color of the digital counter and on the IUR ramp, I see the ramp as expected with the defined colors. But when I run the Panel (in the debugging or mode of publication), the instrument (meter) shows but without the color ramp.  If I save the uir file, close it, then reopen it, the ramp of color in the file of the IUR is also missing, so I have to configure it again. It's the same with a digital slide.

  I think it's a bug? Someone at - it the same problem?

  Greetings from bremerhaven

  Norbert

  My guess is that you have inadvertently saved the. IUR in an old format (8.1 or older). In the user interface editor, check the bottom right of the window to see what the current format of the. IUR is.

  If this happens, you will have to change via file > save as.

  Luis

• analog sync of input with the onset of the digital output

  I'm trying out an analog signal to a file with a specified frequency samples.  I also need a digital output to trigger a measurement at a frequency specified on a separate system.  The frequency is controlled by the loop exits and timed when the iteration number divided by the period is exactly a whole number.

  Both outputs work.  The problem is that they are not synchronized.  The analog output amounts to about 0.5 ms faster than the digital signal.  (I checked with an oscilloscope)  They both start in the 1 ms each loop runs for, but I really need them to start at the same instant.  What can I do to synchronize?  Also, if I'm going in the wrong direction complete, please indicate.

  I use a card PCI-6723, which I think someone at some point, said not having a material sample clock.  That's why I try to use a timed software loop.

  Hi NEA.

  You must use the 6723's built-in calendar to accomplish what you want.  As the digital output subsystem is only clocked by the software, an appropriate solution should be to use one of the counters to the pulse output.

  The attached code should show how.  You can use the counter to output a pulse all samples of the AO N task.  Material requires the initial delay to have a minimum of 2 ticks, so the meter will be behind the task of the AO by 2 samples in this case.  There are different ways to work around this problem if you need (for example write two samples of 0 first).

  Best regards