the display of report but without registration
Hi allI use 10g Release 2. report display in PDF format, but
without records.is there anything wrong in web.show_document?
declare
rep report_object;
vcJobid varchar2(100);
vcURL varchar2(100);
pl_id paramlist;
ipaddress report_server_name.V_IP%TYPE;
vc_server report_server_name.server_name%type;
report_path_name report_server_name.report_path%type;
PORT_NO report_server_name.port%type;
begin
select server_name,report_path,v_ip,port into vc_server,report_path_name,ipaddress,port_no from report_server_name;
pl_id := get_parameter_list('temp');
if not id_null(pl_id) then
destroy_parameter_list(pl_id);
end if;
pl_id := create_parameter_list('temp');
Add_parameter(pl_id,'p_num',text_parameter,to_char(:block.num));
Add_parameter(pl_id, 'PARAMFORM', TEXT_parameter, 'NO');
rep := Find_Report_object('REPORT6');
SET_REPORT_OBJECT_PROPERTY(REP,REPORT_FILENAME,report_path_name);
SET_REPORT_OBJECT_PROPERTY(rep,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(REP,REPORT_SERVER,vc_server);
SET_REPORT_OBJECT_PROPERTY(rep,REPORT_DESFORMAT,'PDF');
--SET_REPORT_OBJECT_PROPERTY(REP,REPORT_OTHER,
VCJOBID := RUN_REPORT_OBJECT(REP);
VCJOBID := SUBSTR(VCJOBID,LENGTH(VC_SERVER) +2,LENGTH(VCJOBID));
VCURL := 'http://'||ipaddress||':'||port_no||'/reports/rwservlet/getjobid' || VCJOBID || '?server='||VC_SERVER;
WEB.SHOW_DOCUMENT(VCURL,'_blank');
END;
Hello
now try...
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
ipaddress report_server_name.V_IP%TYPE;
PORT_NO report_server_name.port%type;
vc_server report_server_name.server_name%type;
report_path_name report_server_name.report_path%type;
BEGIN
select v_ip,port,server_name,report_path into ipaddress,port_no,vc_server,report_path_name from report_server_name;
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
Add_parameter(plid,'p_num',text_parameter,to_char(:Block.num));
Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
repid := FIND_REPORT_OBJECT('REPORT6');
SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_FILENAME,report_path_name);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,FILE);
SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_EXECUTION_MODE,RUNTIME);
SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_DESNAME,'report_name');--enter your report name.
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_APPLICATION_PROPERTY(CURSOR_STYLE,'NORMAL');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
--SET_REPORT_OBJECT_PROPERTY(REPID,REPORT_OTHER,'P_NUM='||TO_CHAR(:Block.NUM));
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
WEB.SHOW_DOCUMENT('http://'||ipaddress||':'||port_no||'/reports/rwservlet/getjobid'||
substr(v_rep,instr(v_rep,'_',-1)+1)||'?'||'server='||vc_server||'¶mform=no','_BLANK');
END;
hope this helps you...
Sarah
Tags: Oracle Development
Similar Questions
-
How to turn off the display after a while without input
Original title:
Activate the screensaver mode full-screen.
Hello
Windows by default is to disable the screesaver mode when an application runs in fulscreen. I need to enable it. I need to turn off the display after a while without input. So is it possible to do?
Hello
Thanks for choosing Microsoft Community to post your question. Windows 7 comes with the power settings using which, you can turn off the display when it is idle for some time.
Please visit the following links and set the option to turn off the display according to your requirement.
Sleep and extended: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows7/sleep-and-hibernation-frequently-asked-questions
Power management
http://Windows.Microsoft.com/en-us/Windows7/products/features/power-management
Hope that the information provided is useful. Do not respond if you need more help.
-
(HP 4580) does not print what items. It will be printed "(scan and copy) and wireless test report, but I we USB connection to"
My Compaq Presario CQ 60-41OUS Notebook PC. Just reinstalled the printer pogram/driver. He hhas worked OK for 2 years.
Al to * address email is removed from the privacy *
And the answer to your message of 15 does not solve the problem?
-
Single request for the display of all, but the values of 1 column for all tables
Hello
All tables have the column SYS_CREATION_DATE.
But I don't want to not display the value of this column
Can anyone suggest a way in which I could achieve this?
Oracle version: 11 GR 1 material
OS: SunOS
See you soon,.
Malika
Published by: user9131570 on July 6, 2010 19:57user9131570 wrote:
@TubbyI * table-wise display the values of all but 1 columns (SYS_CREATION_DATE) in my database.*
I need it to compare to another data base for all these values.
I would like to make a wild guess at what you are getting.
In view of these two tables
create table emp (empid number, empname varchar2(15), empaddr varchar2(15), sys_creation_date date); -- create table dept (deptid number, deptmgr varchar2(10), sys_creation_date date);
you want to combine somehow
select empid, empname, empaddr from emp;
with
select deptid, deptmgr from dept;
in a single sql statement?
-
No noise - volume control appears, the speakers are connected, but without audio
My computer has recently undergone several virus attacks, which I was able to resolve after a lot of enslavement. However, now I find out that my computer has no audio. Occasionally, when I'm trying to be able to control the volume, it is said that there is no installed audio mixers. Currently, it opens the volume control but does not play any audio during the test. I have a Dell XPS 410 desktop computer.
* Update *.Ran the Microsoft Fix It program for playing audio and received this error message:"Troubleshooting cannot continue because an error has occurred. We're sorry, but the program encountered a runtime error. Please try again later. [Code 80070005] »Hello
If I understand correctly that you are unable to hear the sound, train your Windows XP-based computer, and you are away from your computer's Volume control option. In addition, you tried to solve he problem by running a fix it software are Microsoft and received an error code 80070005. I reason?
The possible reasons for the question may be a corrupted driver or audio software.
Please provide the following information for a better understanding of the issue.
1. is the specific question of the sound form a specific program?
2 what was the recent change of hardware or software tempted right computer before the show?
Lets start troubleshooting, the drivers installed and move forward.
Method 1
Step 1
No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows
Step 2
Download and install the drivers from the Dell website
http://www.Dell.com/support/drivers/us/en/19/product/XPS-410
See also,
How to troubleshoot sound problems in Windows XP
http://support.Microsoft.com/kb/307918/en-GB
To display the volume control icon in the notification area
Hope this helps
-
I have to repeat the same steps and display in the Panel before (graphic fft and other indicators).
Do I need to repeat the same code for each entry/channel? I already have too many channels and whenever I change a measure (and code) for an input/channel, I have to repeat the changes to all the other entries.
Thank you
-
Hello
My apologies if this isn't the right forum to ask this question:
I am currently using the name of the script file of title with CS4 Bridge - DAM http://www.damuseful.com/pages/PimpMyBridge.html - to get the name of the file in the IPTC title script. This however in the extension in the title field also puts. A JPG file named 2000 ends with 2000.JPG upward in the title field. I would like to not have the extension appear in the title field.
Is it possible by modifying the script DAM / using any other script available for free.
In case it helps, that's what the dam script currently looks:
#target bridge
If (BridgeTalk.appName = 'bridge')
//-----------------------------------------------------------------------
This script copies the file names of the thumbnails selected in the title field
Also shows how to add menu items
AdobeLibrary scripts should be loaded
This script was created by John Beardsworth www.beardsworth.co.uk/ and modified by Peter Krogh www.DAMuseful.com
This script can be freely distributed and modified
//--------------------------------------------------------------------
We will create our menu
var menu = MenuElement.create ("command", "write to IPTC title field Filename', 'at the end of the tools');
menu.onSelect = function (m)
{
var getFolderChildren = true;
var filesOnly = true;
var inches = getBridgeThumbnails (TYPES. PHOTOSHOP_OPENABLE, getFolderChildren, filesOnly);
for (var i = 0; i < thumbs.length; i ++)
{inch = inches [i];}
MD = thumb.synchronousMetadata;
' md.namespace = ' http://ns.Adobe.com/Photoshop/1.0/ ";
MD. title = thumb.name;
}
Window.Alert ("Done" + i + "records");
};
There are also 3 other Adobe library scripts that come with the download.
I don't know anything about scripting, baby-steps would be appreciated.
Thank you very much.
Change:
md.Title = thumb.name;
TO:
md.Title = decodeURI(thumb.name).replace(/\.[^\.]+$/, '');
-
Original title: trying to activate the Vist problem reports, but get message "Windows problem reports are disabled."
"Windows problem report is disabled." I can't activate the problem reports and Solutions on my Windows Vista computer. When I click on "Change settings", I would be prompted with the following message if poster "some settings are managed by your system administrator." It's personal PC at home. I don't know how to activate it. I already went to political group & register to adjust some settings. But still unable to activate this.
All settings are disabled as this.
This problem only recently.
Method 1
System Restore does not work.
Method 2
Disable the antivirus software does not work.
But after some research, I realized that the problem could be due to a recent installation of a PC anti-frustration software called Soluto (the star was "Activate Crash Handler Soluto"). It worked after that. After uninstalling, I rebooted the PC system. After the reboot, I checked the reports on the problems and Solutions and found I could now adjust advanced settings. I have also reinstalled the software, Soluto and ensured that this time, "activate Crash Handler Soluto" not was not checked (i.e. enabled).
-
Hi guys,.
is it possible to control the display mode of the interactive reports, i.e. display icon, list, view detail, group by, chart, pivot?
As I understand the current setting is stored as a preference of the user for each user... and again when his connection. A settings of the rules them all (all the stored report parameters).
The display mode switchable using a javascript, the api package apex_ir or via a link?
Thank you
~ Dietmar.Hi Dietmar,
It is not a supported way to change the display interactive report mode. With the device connected by Anthony internally, we will consider adding this because part of apex_ir or a link to the future.
Kind regards
Christina
-
7520 photosmart e-all-in-one: suite reinstall printer a few APPS are missing from the display
Had to reinstall the printer after a total recovery of the PC. Now the screen of the printer of the APPs is different and now includes new but it I MISS what I used to use that (as I recall) is an application that opens a screen to set up a print job:
NEW:
"Scan to E-mail".
"Get more" with an arrow pointing down, which does NOT respond to touch
'Manage '.
When I want to PRINT just something selections are ONLY BASIC paper without advanced formats.
I tried the "reset default" for the display/apps/printer but nothng has changed.
Well, I did that several times... total uninstall... total disconnect the router... AC... printer. I'm rather informed with all this stuff, but the display remained the same when the reinstalled.
HOWEVER... If I go in WORD I CAN run away with all the advanced options and that's all I'm really worried at the moment. So the books will print and time!
Thanks a LOT for trying to help me through the glitch, and is for me a problem more as long as I can function in WORD where it counts the most.
-
Displaying paths for user without such "accounts / / 1000/removable.
I want to display a path to a file on the user's screen but without the ' / accounts/1000/removable / "or" / 1000 accounts, shared / "just the exodus" sdcard/photos /...» «or "camera /...» "parties. Is there a simple function that can be fed these Qt that will analyze what I want out of here?
Peter is correct, there is nothing like that. This is the actual path. This isn't like Windows, where everything is based on the drive letter for the physical medium that they are on.
You could log a feature request we SAID things that point to shared and sdcard all the time: SAID
But for now, you should play with QDir QUrl or use some manipulation of string/regex.
-
On Satellite M40-223 some games make the display freeze
Hello
I have a Satellite M40-223 with an Ati Radeon X 600 is.
Some games (such as shockwave, world of warcraft games or never)
Winter Nights 2) make freeze display and the crash of the laptop
(accidents do happen after the same amount). I downloaded the drivers
on the toshiba site (16/11/05, 6.14.10.6534 drivers) and nothing has
has changed. Then I downloaded the latest drivers from the ati site
(http://ati.amd.com/online/mobilecatalyst/) and removed the older
(following the instructions of ati). The display freezes always but
Sometimes the VPU recover the previous session.
What should I do?
I will try to uninstall these drivers and install the ones toshiba
Once again? When I installed the drivers from toshiba for the first
I did use uninstaller first, time could this affect the most recent configuration?I will try to use the omega drivers?
Best regards
Laura
Hello
It s not advised not to use the graphics driver from Toshiba. The other drivers don't support the overheating protection. The games are a high performance programs. If these applications are running on the laptop all devices must operate with maximum performance and produce a lot of heat. The high temperature could be responsible for this gel and close downs.
I read in the forum that you can install the other drivers (not Toshiba) at your own risk.
I think you should check the fans for dust and debris.
Sometimes the cooling modules may not cool properly because the dust and, therefore, these problems occur.
Additional do not forget that there is enough free space around the laptop to the airflow correctly -
The display is on the side.
After that my computer froze recently, when he finally returned, the display was completely on the side. Fortunately, I have a separate keyboard because I set the computer on the desk as an open book on the end to see properly. How can I get it back. When the computer part comes first the display is correct, but as soon as he gets to the part of windows, even the sign, it is wobbly. I don't know what to go in order to go back to the way it was.
Hold down the CTRL and ALT keys, press the left arrow or right arrow to rotate the screen. Boulder computer Maven
Most Microsoft Valuable Professional -
problem with the display driver
I am running windows 7 final flashes the screen becomes black and turns on with a message at the bottom right indicating that the display driver failed but has recovered successfully, but he says it's the graphics driver for windows vista how to fix this? also when going through we found that the driver for the wifi card driver is not fully installed as well as a few other drivers, is it possible to install these drivers in working condition?
Moved Windows 7 installation, set at level and activate Forum.
Hello
You get the right drivers is the pre-installed operating system, the hardware if manufacturer or by the manufacturer of your computer/laptop if you yourself the computer built or changed the graphics card, etc.
You go to computer/laptop or the Web site of the manufacturer 3rd party material > look for a Support/Drivers Download section > put in your computer or hardware part model number, depending on whether it's the computer or the hardware manufacturer's Web site > search your operating system > then find Windows 7 drivers (Audio, graphic, network adapter, drivers etc.) > download and install.
You don't say what version of 'bit' of Windows 7 you have 32-bit or 64-bit.
Choose the correct version of 'bit' for these drivers.
See you soon.
-
How to set the DISPLAY variable to run admsi.pl?
Dear Experts,
I'm trying to patch Oracle apps R12 using admsi.pl.
HostName: black
DB APPS: SCREWS
But I get the error message:
Please set the DISPLAY variable and re-run this script
----------
That's what I did:
Listener and database LIVE are already running.
connect the server on linux as a unix user: applmgr
/ oapps/applmgr/SCREWS/apps/apps_st/appl CD.
. APPSVIS_black.env
CD /oapps/applmgr/VIS/apps/apps_st/appl/ad/12.0.0/bin/
admsi.pl
Invoking Oracle Patch Application Wizard...
Please set the DISPLAY variable and re-run this script
-----
huh?
--------
the value | grep-i 'display '.
DISPLAY =: 0.0
the value | WC
435 486 25235
-----
I noticed that there are 36 .env files!
For single applmgr!
find/oapps/applmgr /-type f-name '*.env ' | WC
2626 36 36
For oracle, there is another 7 .env files!
find/oapps/oracle /-type f-name '*.env ' | WC
7 7 513
I received the file of environment (env) correct?
Or I need to first run a few more EPS?
If so, which?
What would be the order of operations?
----------
sqldeveloper gave me problems with the display sometimes.
But same sqldeveloper works very well.
----------
What is the secret to get admsi.pl to run according to the normal procedure?
Thank you very much!Please see this thread - error when running admsi.pl
Thank you
Hussein
Maybe you are looking for
-
Site appears in Firefox. Works fine in IE 10 &; Chrome. Windows 8 / x 64
Using Firefox on Windows 8 21.0 / x 64. I have some sites where Firefox displays a graph of look odd, but none of the user interface that displays in Chrome or IE 10. I can recreate, for example, by going to http://www.basspay.com. I'm puzzled. I rem
-
disappearance of storage with Safari el capitan
I have a macbook air 13 "mid-2011 running version 10.11.4 El Capitan. It has approximately 17 GB of free space for HARD drive storage. When I run Safari (9.1) and let the system and Safari open my HARD disk gradually drops and finally will be reduce
-
Tecra A9 - external monitor black after closing lid
Greetings, I looked for answers to this but can't find so far. I have a Tecra A9. My problem: I have an external display connected. Sometimes, when I get to work in the morning and open the lid of my laptop the monitor to the laptop and external moni
-
HP OfficeJet pro 8610: new software update for HP OfficeJet pro 8610
Dear HP guys! I'm officially confirm that I used compatible cartridges for my MFS and don't need no guarantee for this. Please just return old version of the software for my device so that I can use it. I bought this unit for my private needs and acc