The dreaded blue screen on startup with Windows XP

Similar Questions

• Get the following blue screen on startup error: STOP: 0x0000007E, BAD_POOL_HEADER STOP: 0 x 00000019, IRQL_NOT_LESS_OR_EQUAL STOP 0x0000000A

  Original title: XP questions

  I am running WIndows XP Pro SP3 on a Dell Optiplex gx270s and get several error messages stop "Blue screen" intermittent and different at startup (for protect my computer). Prompt notification Windows found problems with the file system and run CHKDSK/F. I am unable to do so as I can not find my administrator password (also necessary if you plan to run from my XP installation disc). Windows Fix - It Center, running 'Folder & troubleshooting' reports icons randomly change the icons but no resolves not. I didn't notice the icons change and do not if this is related to Stop what error messages at startup, I've been doing. Running a disk check during start-up and Diagnostics IDE are not problems. It lasts for quite awhile and I've delayed just deal with it because it is not always the case. A lot of program installs / uninstalls and Microsoft Updates since its start if the system restore wouldn't do me any good. Before reinstalling the operating system, what are my options? Is there a way to reset my ' Administor password ", or better yet does not require one, (it is a personal computer for personal use only and I don't remember why a password has been assigned)?

  Here are some of the error messages:

  STOP: 0x0000007E (OxC0000005, 0x89AD8000, 0xA579CCB4, 0xA579C9BO)

  BAD_POOL_HEADER

  Technical information:

  STOP: 0 X 00000019 (0X00000020, 0X89D5FDA0, 0X89D5DC8, 0X0A050002)

  IRQL_NOT_LESS_OR_EQUAL

  STOP 0X0000000A

  (0x6750300C, 0 x 0, 00000002 00000000, 0x804FFDB6)

  Hello

  You did changes to the computer before this problem?

  The administrator password cannot be reset.

  See the following article for more information: Microsoft's strategy concerning lost or forgotten passwords

  In the following troubleshooting steps may help you resolve this problem.

  How to troubleshoot a Stop error 0x0000007E in Windows XP
  http://support.Microsoft.com/kb/330182

  FIX: Error Message When you connect a scanner or a digital camera to a computer that is running Windows Vista or Windows XP Service Pack 2: "BAD_POOL_HEADER STOP"
  http://support.Microsoft.com/kb/934177

  You receive an error message "Stop 0x0000000A" in Windows XP
  http://support.Microsoft.com/kb/314063

• Blue screen on startup of windows normal and safe mode

  I am using Windows XP, this morning my computer froze and I used the button to turn it off.   At startup, I got a blue screen that says "a problem has been detected and Windows has shut down to prevent damage to your computer.  It's for me this blue screen with the same message for each option, including the mode without boot failure.  Anyone know anyway I can try to understand what is the problem?
  Stop message:

  STOP: 0X0000007B (0XBA4CF524, 0XC0000034, 0X00000000, 0X00000000)

  If I try to start safe mode, I get the stop message
  STOP: 0X00000007B (0XF78AA524, 0XC0000034, 0X00000000, 0X00000000)

  I have windows XP Professional.  All service packs downloaded.

  Anti virus is Mcafee
  
  Blue screen started after a frost, and I used the power button to turn off.

  I use a Dell XPS M1730 (laptop).  I don't have my windows with my disks.

  I'm sure it's a virus because just before freeze Mcafee said it found and removed two Trojan horses, but I have no idea how to get rid of them with a blue screen to come whenever I try to turn on the computer.

  Hi Cameroncb,

  You may receive an error message "Stop 0x0000007B" If your computer is infected with a boot sector virus.

  See the Microsoft article below and check if it helps.

  Advanced troubleshooting of errors "Stop 0x0000007B" in Windows XP

  http://support.Microsoft.com/kb/324103

  Error message "STOP 0x0000007B" when you restart your Windows XP-based computer

  http://support.Microsoft.com/kb/316401

• Blue Screen Of Death with Windows Vista

  I am running Windows Vista and after trying to update a NVIDIA Geforce driver, my computer will not start at the top and comes up with the "blue screen of death/Disconnections. Initially it started, but icons were very large and I could finally get the right size. Thought that there was a problem with the driver compatibililty and deleted driver (I think), not knowing that I would not be able to find the original driver. Restarted and it is when I got the dreaded "BSOD" and knew with my computer knowledge, I was in trouble. Tried to reboot and then restart with the Windows disk, with the same results. Past to start in safe mode, normal mode, etc... and does not boot in any mode, when eneter is pushed (of your choice) Unit acts as if it starts successfully, with the small bar down Center of screen scrolling as it should, but then the BOSD rises. Support, not much luck, worked with NVIDIA replaced card video, restarted, same result. Need help please.

  Hello

  Here's a problem similar to yours that I help a CO-OP with.

  See if it helps you too.

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-system/unable-to-successfully-boot-syste-after-trying-to/14523396-5c88-4460-A29E-87d03fa00074

  See you soon.

• Blue screen on startup without windows error message 8

  Hello

  My computer toshiba satellite, only 2 months, shows a blue screen with no error message when starting upwards. Windows 8. I searched google for an answer and everything that I can find is: 1) remove the battery. 2) press F8. (3) remove the battery, connect the power cable, press and hold the power button for 15 seconds. None of these fixes worked. After holding the power button for 15 seconds the word Toshiba appears, as it tries to start, but only stays on for about 2 seconds then goes to blue screen again.
  Very frustrated with windows 8! Have had problems with him from the first day! Help, please!
  Sandi

  Hello

  To help you, we will need files DMP to analyze what exactly happened at the time of the accident, etc.

  If you don't know where the DMP files, here's how to get to them:

  1. go to the folder % systemroot%\Minidump.
  2 copy all the DMP files in the Minidump folder on your desktop and zip then those files.
  3 download the zip containing the files DMP to Skydrive or a Web hosting of your choice and paste in your answer.

  If you plan to use Skydrive, but do not know how to download it, please see the following:

  http://www.WikiHow.com/use-SkyDrive

  Please note that all programs "cleaner" such as TuneUp Utilities, CCleaner, etc., default will remove DMP files after use.

  If your computer doesn't generate DMP files, follow these steps:

  1. start > type systemroot which should show the Windows folder, click it. Once inside this folder, make sure there is a Minidump folder created. If not, CTRL-SHIFT-N to create a new folder and name it Minidump.

  2. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > performance > settings > advanced > make sure there is a check mark for "manage automatically the size of pagefile for all readers."

  3. Windows key + key Pause. This should appear in the system. Click Advanced on the left system settings > advanced > startup and Recovery > settings > system > ensure there is a check mark next to "write an event to the system log.

  Make sure Small Memory Dump is selected and ensure that the path is % systemroot%\Minidump.

  4. check that the viewers is ENABLED:

  Start > Search > type services.msc > on the name tab, search for Windows Error Reporting Service > if the service status is not started, then right-click and select start. Also to ensure that, under Startup Type set to automatic rather than manual. You can do this by right click, select properties and under general selection on 'Automatic' startup type and then click on apply.

  If you can not get into normal mode to do this, please do so via Safe Mode.

  Kind regards

  Patrick

• Blue screen common problems with Windows 7 Professional

  Hello

  My laptop that runs Windows 7 Professional has been crashing with a blue screen and restarts itself several times in the recent past. I have some information on two recent falls that occurred during the 6 days (yesterday and today). I think I was the first remote desktopping (last Wednesday) and has been streaming video on the internet with an Antivirus scan running in the background the second time (today). I guess that the accidents were caused due to high loads as I was running some heavy programs both times. I enclose a copy the details of the problem for the two events below.

  Last occurrence (today):

  Signature of the problem:
  Problem event name: BlueScreen
  OS version: 6.1.7601.2.1.0.256.48
  Locale ID: 1033
  More information about the problem:
  BCCode: f4
  BCP1: 0000000000000003
  BCP2: FFFFFA8007C166F0
  BCP3: FFFFFA8007C169D0
  BCP4: FFFFF80002FCB7C0
  OS version: 6_1_7601
  Service Pack: 1_0

  Product: 256_1

  Previous (last Wednesday) occurrence:

  Signature of the problem:

  Problem event name: BlueScreen

  OS version: 6.1.7601.2.1.0.256.48

  Locale ID: 1033

  More information about the problem:

  BCCode: 7A

  BCP1: FFFFF6FC50020F30

  BCP2: FFFFFFFFC00000C0

  BCP3: 0000000045F0A880

  BCP4: FFFFF8A0041E6000

  OS version: 6_1_7601

  Service Pack: 1_0

  Product: 256_1

  I had a few temporary files and minidump both the times mentioned in the details of the problem. Please let me know what is the cause frequently these problems and how to solve them.

  I would also like to know if these blue screen crashes affect the functionality of my laptop or files/data stored in it. Thanks in advance for your help.

  Thanks and greetings

  MOULEE Pascaud

  I would update your drivers of Juniper, theyre 6-7 years. I don't think that they are windows files

  NETwNs64.sys your Intel wireless drivers are in 6 years. I'd like to update

  Intel® Management Engine Interface is also 6 years

  Your Intel video drivers are also old - 3 years

• How to fix the BSOD (blue screen of death) on windows 8 cause of tcpip.sys

  I bought a Hp Pavilion h8 - 1360t last year in 2012. He had Windows 7 installed on it, but I have upgraded to Windows 8 pro X 64 some time earlier this year. At first, everything was going well until I kept getting BSOD every few hours or so at random. The BSOD said that tcpip.sys driver_irql_not_less_or_equal. As a first step, I try to understand me and only probably caused by: (tcpip + 65 95 d) tcpip.sys with the debugger tool can someone help me or tell me what it is.

  Here's my dmp. files https://skydrive.live.com/?cid=222e0c932735b73d&id=222E0C932735B73D%21256 

  WP

  Often of tcpip.sys errors are caused by the application of malicious programs installed (in your case AVG).  I delete AVG and use the built in Defender (at least for testing)

  If you continue to crash after removing AVG download DMP files and we can get more aggressive with them.

• Error blue screen on startup. Windows is unable to start.

  

  I'll try to run a cleaner and registry repair Scan. Any guidance would be appreciated.

  Callum

  This phenomenon was related to your moy.  I remove it and use MSE in its place.

  AVG can be a cause of BSOD.

  Please delete and replace by Microsoft Security Essentials at least to the test

   

  http://www.Avg.com/us-en/utilities

  
  http://www.Microsoft.com/security_essentials/ "] Microsoft Security Essentials - free Antivirus for Windows"

• blue screen on laptop with internet explore

  I have a Windows 7 HP Pavilion dv7. I can use the internet in 2 different ways - through AOL or Internet Explorer. It works fine through AOL. But when I go directly through Internet Explorer, I get the dreaded blue screen. I got a messsage upgrade to Internet Explorer 11, but when I try to do, I get the blue screen. Any suggestions? Thank you very much.

  Hi MomaDance,

  I understand that you cannot move to the Internet Explorer 11 explore.

  Try to go on the AOL version and download from here.

  http://Windows.Microsoft.com/en-us/Internet-Explorer/IE-11-worldwide-languages

  I hope this helps.

• I can't open windows update in Safe Mode. Also blue screen at startup ('a forward driver a buffer based on the battery'

  My laptop keeps hitting a blue screen at startup ('a forward driver a buffer based on the stack'), I can only start it in safe mode. I want to try windows updates to see if this will help, but whenever I click on the button to update windows on the start menu, nothing happens. I tried searching for the program to see if I can open it another way, but can't find it. If I click on windows update and then nothing happened. I have windows vista home.

  original title: I can't open windows update

  Hey ElizabethSlater,

  Try to run a full scan with the Microsoft Safety Scanner to make sure that nothing is found.

  Try also to install the latest drivers from your computer manufacturer's website. If you have difficulty to locate the website of your computer manufacturer or the drivers on their page, please provide your computer brand and model in your next reply. If you have built your computer you need visit the site of the manufacturer of each piece of hardware to get the latest driver.

  Once the drivers have been installed, try to restart your computer, and then test to see if the same problem occurs.

  Hope that helps.

• Blue screen on startup, the system restore / repair did not work?

  Hi, I get a blue screen on startup and cannot start windows - with the error code x0000007E.

  I followed the steps on http://support.microsoft.com/kb/958233#StartupRepair however runs the repair does not work, and did the system restore.

  Will be saved my files / is there a way to fix this? Thank you!

  Hello

  You can save your files by putting the drive in another computer as a 2nd disk (best) or external
  Drive USB enclosure and then backup to removable media such as CD, DVD or other USB drives.
  Of course a real store of the computer or the manufacturer of your system can help to recover the files.

  Or you can use a boot Ubuntu CD to back up data.

  Use Ubuntu Live CD to backup files from your Windows computer dead
  http://www.howtogeek.com/HOWTO/Windows-Vista/use-Ubuntu-Live-CD-to-backup-files-from-your-dead-Windows-computer

  --------------------------------------------------------------

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive download collected files and after shot/screenshot.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  -------------------------------------------------------------------------

  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  (also Windows 7)
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  ===========================================================

  The system has RAID? If so, it's also very suspicious.

  This error is usually a driver problem and display adapter (video) driver is the most suspicious if she
  may be others. Antivirus/antispyware/security programs, equipment (heat) and major software problems
  can also cause the error. When you get to the section of the driver to use the Troubleshoot utility my generic
  methods in the next message and then return to the if necessary troubleshooting tool.

  Have you recently added hardware or drivers updated? Don't forget to look in Control Panel - Windows
  Updates to see if all drivers have been updated it. Other donor opportunities include the antivirus/anti-
  spyware/security programs.

  When you get to the pilot and sections of the memory of the troubleshooter check the following message to
  update drivers and memory test and then return to the troubleshooter if necessary.

  BCCode: 7F 0x0000007E which is also 0x1000007E

  Cause

  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. TO
  interpret, you must identify which exception has been generated.

  Common exception codes are:

  • 0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred.

  For a complete list of exception codes, see the Ntstatus.h file located in theinc directory
  the Microsoft Windows Driver Kit (WDK).

  Solve the problem

  If you do not have to debug this problem, you must use certain basic troubleshooting techniques.

  • Make sure you have enough disk space.
  • If a driver is identified in the bug check message, disable the driver or check with the
  • Reference of the manufacturer for driver updates.
  • Try changing video cards.
  • Check with your hardware vendor for updates to the BIOS.
  • Disable the BIOS memory options such as implementing caching or shading.

  If you plan to debug this problem, you may find it difficult to get a stack trace. Parameter 2
  (the address of the exception) must identify the driver or function that caused the problem.

  If the exception code 0 x 80000003 occurs, a hard-coded breakpoint or assertion was hit, but the system
  has been launched with the /nodebug. switch. This problem should occur infrequently. If it occurs repeatedly,
  Make sure that a kernel debugger is connected and the system is booted with the Switch/DEBUG .

  In case of exception code 0 x 80000002, the trap frame provides additional information.

  If you do not know the specific cause of the exception, consider the following questions:

  • Hardware incompatibility. Make sure all new hardware that is installed is listed in the
  • List of Microsoft Windows Marketplace tested products.
  • Service driver or defective peripheral system. A service driver or defective peripheral system can be
  • responsible for this error. Hardware problems, such as the incompatibilities of the BIOS, memory, conflicts
  • and IRQ conflicts can also generate this error.

  If a driver is listed by name in the bug check message, disable or remove that driver. Disable
  or remove drivers or services that have been recently added. If the error occurs during startup
  sequence and the system partition is formatted with the NTFS file system, you may be able to use safe
  Mode to rename or to delete the faulty driver. If the driver is used as part of the system startup procedure
  in Safe Mode, you must start the computer by using the Recovery Console to access the file.

  If the problem is associated with Win32k.sys, the source of the error may be a third remote
  control program. If this software is installed, you can remove the boot of the computer service
  by using the Recovery Console, and then by removing the offending system service file.

  Check the system log in Event Viewer for additional error messages that might help identify the
  device or the driver that generated the bug check 0x7E.

  You can also disable memory cache BIOS may try to resolve the error. You should also
  Run the diagnostics of material, especially the scanner memory, which provides the manufacturer of the system.
  For more information about these procedures, see the manual of your computer.

  The error that generates this message may occur after the first reboot during Windows Setup, or
  Once the installation is complete. A possible cause of the error is lack of disk space for installation and system
  BIOS incompatibilities. For problems during the installation of Windows that are associated with the absence of disc
  space, reduce the number of files on the disk drive hard target. Find and delete any temporary
  the files that you do not have to have files hidden Internet, backup application and.chkfiles files that
  contain fragments of file saved to disk scans. You can also use another hard drive with more drive
  free space for the installation. You can solve the problems of BIOS by upgrading the version of the system BIOS.

  BCCode: 7F 0x00000007E who is also a 0x1000007E<-- read="" this="">
  * 1141.html? order = votes http://www.faultwire.com/solutions-fatal_error/System-thread-exception-not-HANDLED-0x0000007E-

  ----------------------------------------------------------------------------------------------------------------------

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during ' blue screen of the.
  death ' crashes and displays information about all accidents of a table.
  Free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by drivers of old or damaged, in particular the video drivers
  However, there are other causes.

  You can do mode if necessary safe or the Vista DVD command prompt or
  Options recovery if your system is installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Does not work
  tell all possible driver issues).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• We had a power outage in our area, the computer was on and running, got the blue screen of death with the following: __0x000000C2, 0 x 00000043, 0xD6C61000, 0 x 00000000, 0 x 00000000 BAD POOL CALLER

  We had a power outage in our area, the computer was on and running, got the blue screen of death with the following:
  0X000000C2, 0 X 00000043, 0XD6C61000, 0X00000000, 0X00000000 BAD POOL CALLER

  If you have not saved your data and you want to start the computer with Linux Livecd such as Knoppix and copy your data files on an external hard drive. It is a precautionary measure before the step follows because things happens. ;-)

  Then do a repair installation.

  http://www.michaelstevenstech.com/XPrepairinstall.htm

  If the repair installation does not work, test the equipment to ensure that none have been damaged during the blackout and then do a clean install of Windows.

  http://www.elephantboycomputers.com/page2.html#Hardware_Tshoot

  http://michaelstevenstech.com/cleanxpinstall.html - Clean install - how-to
  http://www.elephantboycomputers.com/page2.html#Reinstalling_Windows - what you will need at hand

  If all goes well, no equipment was damaged during the shutdown. Consider buying a power supply (battery backup). APC and Belkin are good; for a computer, simply spend about $60. MS - MVP - Elephant Boy computers - don't panic!

• Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  Help! When HP system windows7, including the QuickWeb button on the screen of the go blue screen with the option - BIOS application error (501).

  The error you mentioned does not match the description of the usual Windows blue screen errors. When I put this error for a web-search, it has proved to be a common problem with some HP computers. I was able to get my hands on the following link for a thread in HP communities that contains information about this error. Have a read of the content in this link and see if this applies to your situation:

  http://h30499.www3.HP.com/T5/notebook-HP-ProBook-EliteBook/HP-6730b-quot-BIOS-application-error-501-quot/TD-p/1075640

  Windows errors blue screen looks something like this. If you receive these errors, let us know about it as well as the complete info you see on the screen. And the error you mentioned in your initial post, I guess that the HP support forums would be a better place to discuss. Here is the link to the HP support forums:

  http://h30434.www3.HP.com/

• Error 0x0000007B blue screen VM boot with 32-bit Windows 2003 using VMware Converter 4.0

  Error 0x0000007B blue screen VM boot with 32-bit Windows 2003 using VMware Converter 4.0

  I want to create a virtual machine using VMWare Converter 4.0 from an Acronis True Image to ESXi Server 3i .tib backup file. The conversation seems to be working, but when I try to start the virtual machine, it begins to start, displays the Windows 2003 splash screen briefly and then fails with a blue screen with the following error:

  STOP: 0X0000007B (0XFFFFFADFD520F3C0, 0XFFFFFFFFC0000034, 0 X 0000000000000000, 0 X 0000000000000000)

  Looking through the forums I've seen this error mentioned with 64-bit Windows 2003, but no mention of 32-bit?

  Any help much appreciated.

  THX

  > Thanks, unfortunately the .tib Acronis True image files do not work with Converter 3.0.3

  You already have a virtual computer that start - it's just bluescreens - so no need to run the full convert again.

  Juist use Converter 3.0.3 to configure the virtual machine - part seemed to have failed

  ___________________________________

  Description of the vmx settings: http://sanbarrow.com/vmx.html

  VMware-liveCD: http://sanbarrow.com/moa.html

• Windows hangs on the last blue screen and is unable to stop.

  During the shutdown process, after downloading updated successfully, the is Windows XP hangs on the last blue screen "shutdown of windows.  For now I just have to unplug it from the power supply to the stop card.  I run a maintenance program, but it does not solve this problem.

  Hi, Tinker,

  1. you receive messages or error codes?

  2 have. what maintenance program you tried running?

  Method 1:

  You can visit the computer manufacturer and try updating the chipset and video card drivers.

  How to manage devices in Windows XP

  Method 2:

  You can also check if the problem occurs in safe mode.

  To start the computer in safe mode

  A description of the options to start in Windows XP Mode

  You can also read the following article and check if it helps

  Advanced Troubleshooting for shutdown problems in Windows XP

  You can check in the event viewer to see if there are newspapers in events related to the issue.

  For more information, you can consult the following article:

  Procedure to view and manage event logs in Event Viewer in Windows XP