The DVD that I burned have a difference in quality in my DVD player and computer...

Similar Questions

• Mac Book stop with the movie in the dvd player, and now it opens in the reset password screen?

  I'm running OS X El Capitan 10.11.5 and my daughter and her friends used to watch a movie last night and stop it before releasing the film. My Mac Book Pro is the start of the password reset screen/mode? It gives me only 3 options, none of which is true. (1) I forgot my password. (2) my password does not work when you connect 3) my keyboard does not work when you type my password to connect? When I opened the Apple on lft albums he gives me a boot disc, restart and turn off? I tried all the options and it restarts just on the same page? Someone at - it advice? Thanks in advance!

  The appearance of the password reset screen indicates FileVault2 is enabled on your MBP. Fix?

  If so, that'll probably get you out this Pickle: https://derflounder.wordpress.com/2015/01/17/yosemites-filevault-2-pre-boot-reco very-options /

• Stuck in the DVD player

  OK it's not exactly in the drive, the drawer is opened and he is stuck between the metal case outside of the DVD player and Cabinet plastic of my M1710, above where it would normally slot. The disc is actually coming out about an inch and it can run without much resistance, but it's as if something has snagged in the hole in the middle of it and it will not just slide. The status bar can always slip in and out, but I don't want to close it because it'll push the disc more.

  The model of the drive is TSSTcorp DVD +-RW TS - L632D

  Thanks for any help in advance.

  
  

• Dell Inspiron 560 No. open/close the dvd player button

  How can you "manually" open/close the dvd drive on the inspiron 560? It is not a button manually open/close the dvd player, and it's frustrating!

  Laughing out loud! Thank you! I found it after doing some detective work! Thanks again!

• -DVD burn does not work in the DVD player sometimes

  I have a Mac Pro from the beginning of 2008, and it came with a DVD drive (OPTIARC DVD RW AD - 7170A).  I was able to burn DVDs with using toast in the past.

  But lately, the half of the DVD burn won't play in my DVD consumer player.  I get a "Disk error" message when I try to play them, and they do not load.  It's a strange problem, because some of them work and some do not.  I can't tell where the problem is.

  Is there a way to test the DVD player?  Should I just replace it?

  Many brands of blank DVDs gives very inconsistent results when burning. If you use a brand store or generic blanks, that may be the problem.

• Satellite L455 - Burned DVD plays in slow motion in the dvd player

  Hello

  I have a Satellite L455.

  I got burned a DVD with Nero 7 premium, but when I play in the dvd player, it works idle all the time. Other movies are played normally (so the problem is not the dvd player phillips), this only happens with the ones I burned in my new Toshiba laptop.

  I have tried to burn all kinds of speed (x 8, 6 and 3), but the problem has not been resolved.

  Can someone tell what should I do?

  Thank you.

  Hello

  You tested this external DVD drive?
  I recommend to check the options of Nero again and maybe, you should also use an other DVDs from different manufacturers.

  My DVD player didn t play DVD's serious too, I changed the manufacturer of DVDs and then the DVD that can be read by a DVD player

• DVD burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  VDs that I burn with iDVD works on new DVD players, but not on older versions of the DVD player. Any suggestions?

  I'm using an iMac with OS X El Capitan 10:11.1 and iDVD 7.1.2.

  You use DVD + R disks?  Those who are not compatible with DVD players before 1997.  The DVD-R is compatible with all DVD players.

  

• I have a laptop SVF1521P2EB model. Since I put victory 8.1 the dvd player has falt error 19-the register

  I have a laptop SVF1521P2EB model. Since I put victory 8.1 (I Think) the dvd player does not work. The pilot is there and looks ok, but reports the error 19 which says that there is an error in the registry. Any help to fix it please

  Cheers, will have a goat that

• I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device. is it possible to reset to original settings?

  I hope someone can help me. I changed a few settings in the BIOS Setup, and now I have just a black screen. I changed the main boot to the DVD player device.  is it possible to reset to original settings?
  I am running Windows XP

  clint341,
  Thanks for posting on the Microsoft Answers forum.  We cannot guide you more precisely by changing the BIOS settings that the BIOS settings are specific to your motherboard.  However, most (if not all) parameters of the BIOS have an option to restore the default BIOS (sometimes called "default opitimized").  It may be an option in the menu that you highlight, then press enter or it can be assigned to an F key and States at the bottom of the screen, press F? for the default settings.  I hope this helps.  If you are still not able to reset, check with the manufacturer of PC for more information about the BIOS. Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP?

  Separated from this thread.

  Hello

  Thanks for the reply, I clicked on the link and it shows windows...

  Here I can not open the widows of anywhere.

  How to operate the DVD player so that I can run DRIVER RECOVERY DVD from HP

  MINE IS A VERSION OF COMPAQ PRESARIO HOME ON WINDOWS VISTA

  He always goes to startup repair

  then he said not being able to correct automatically

  Under system recovery option what can I do?

  I don't want to go back to the point of origin of the memory (factory settings)

  Thank you

  Patrick

  Hello

  Have you tried using SafeMode w/command invites to perform a system restore?

  1. Press the power button to turn on the computer.
  2. In the first screen, press the f8 key repeatedly every half second until what the Windows Advanced Startup Options screen displays.
     
  3. Press the arrow key down until Safe Mode with command prompt is selected, and then press ENTER. Wait while the Windows Load system files. The Windows log on screen is displayed.
  4. At the command prompt, type rstrui.exe, and then press ENTER. Wait a few moments for the system to open restore window.
  5. Follow the on-screen instructions to perform a system restore.

  You have now returned the computer to a previous restore point using Mode safe mode with command prompt.

  Using Microsoft System Restore (Windows Vista)

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c00807369

  You also have the option to create a backup of your files when you perform a recovery

  http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&DLC=en&docName=c00809678&LC=en&product=18703#n405

• What should I do if my computer says that the DVD player is not correctly?

  Problem with the DVD player:

  It shows that the DVD player is not correctly.

  What should I do?

  Please, help me to solve this problem with DVD player: it shows that the DVD player is not correctly. And it is not ejected.

• My Dell 1014 works on Windows Vista and I want to install Windows XP on it. "I am train to install a version that is older than the version that I already have."

  My Dell 1014 works on Windows Vista and I want to install Windows XP on it. When I insert the XP CD and try to install, the system throws a message saying that I am trying to install a version that is older than the version that I already have. How to solve this problem?

  original title: Windows XP installation

  Hi Ribhu,

  How did you start the Windows XP installation? This is the start of the Windows CD or Windows itself?

  You can try a new installation of Windows XP after formatting the hard drive Vista and check.

  You can consult the following wire link and check if it helps.

  How can I replace Vista with XP?

  Note: The above mentioned thread contains third party links.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also check out the link:

  How to install or upgrade to Windows XP

• Does anyone have suggestions on what to do when the Windows 7 Installation DVD is not recognized by the DVD player.

  I'm trying to do a custom installation of Windows 7 Professional 32 - bit on my Dell Inspiron 530, which is running Windows Vista Home 32 bit.  I ran the Windows 7 Upgrade Advisor, which was positive.

  The DVD player does not recognize the installation of the new (purchased at microsoft) DVD, although he acknowledges other CD and DVD.
  I tried to restart the computer and also the start of the player directly in the BIOS.
  In the BIOS I have the following message:
  "No available boot device.
  Press the ENTER key to try again
  SATA-0: installed
  SATA-1: installed
  SATA-4: no
  SATA-5: no

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  Fix for CD/DVD drive missing:

  http://support.Microsoft.com/kb/982116

  If this does not work, try to check the manufacturer of the optical drive to the firmware updates available.

• After the update to iTunes to version 10.7, I can't buy music on iTunes Store. The error that says I have no ' written ', 'reading of rights' and need to change it in my library.

  Original title:

  After the update to iTunes to version 10.7, I can't buy music on iTunes Store. The error that says I have no ' written ', 'reading of rights' and need to change it in my library.

  I tried this, but it does not solve the problem. I run Win 7 64 bit.
  What should I do?
  Best regards, Jan

  Hello

  What is the exact error message?

  I suggest you consult the following links.

  Unable to connect to the iTunes Store

  iTunes: iTunes Store advanced troubleshooting

  If the above does not help, I suggest you to contact the Apple support.

  http://www.Apple.com/support/iTunes/

• Trying to install my Creative Suite 6 on my MAC, but I don't have the DVD player on my computer. If not, how can I install these? !!

  Trying to install my Creative Suite 6 on my MAC, but I don't have the DVD player on my computer. If not, how can I install these? !!

  Try these links

  Download the CS6 products

  Download Adobe CS6 Trials: Direct links (without Assistant or Manager) | ProDesignTools