Power/data light on USB?

Similar Questions

• G60: laptop does not power off with powered usb hub attached

  I have an external powered USB hub which I attach to my G60 running Windows 7 Edition Home Premium. When I try to stop the G60 with the attached hub and under tension, the shutdown sequence passes Logging Off to Shutting Down but never completely off. Power and lighting wireless turned on and the fan continues to run.

  Is there a way around it except turn off the USB hub before shutdown?

  Hi @Andrew_c51 ,

  I saw your post about the problems with your laptop not shutting not completely when the powered USB hub is connected. Sounds like your laptop goes into sleep or hibernation. I recommend you contact the manufacturers of USB powered to see if there is a way to stop it or just unplug the hub.

• How can I back up all my data on a usb key mozilla Firefox?

  I now have a sync account. But in addition to being able to sync to other computers I want to safe me data on a usb key. How can I do this? Thank you Tj

  The profile is a folder where your firefox to save your data securely

  • https://support.Mozilla.com/en-us/KB/profile

  read the bottom of the article to know how to backup and recover your personal data

• Satellite A60 power button / light stop in 2 colors. blue & orange

  Hi can someone tell me why power button lights in 2 different colors Blue and orange every thing seemed to be sure best ok
  Thanks in advance

  This will happen if your laptop is in stand by mode.

• How can I download data from key USB flash to a Windows 7 computer

  I need to transfer some files from my PC to my PC Windows 7 Windows XP using a USB flash key. I've used Windows Easy Transfer to move my files without problem and some programs but did not download some files. I downloaded these files on a USB flash and I can access the files, as long as the stick is pluged. How can I download data from the USB flash on my Windows 7 computer

  Hello

  The following video may help:

  http://www.YouTube.com/watch?v=hrMQh0Xkpvs

  or this article:

  http://www.swarthmore.edu/documents/administration/its/how%20To%20Use%20A%20USB%20Flash%20Drive.PDF

  and here:

  http://TECHTIPS.salon.com/use-USB-flash-drive-transfer-files-PC-Mac-2544.html

  (Mac here can be a PC).

  Good luck.

• Raw data to a USB printer

  How can I send the RAW DATA to a USB printer?

  I found a bunch of programs and sharper than what's to do that. How can I do it using LabView?

  The net don't need to have the VISA or any other software program just the raw data, and that's it.

  Thanks for your help

  Resolved:

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=439160#M439160

• my ex loaded my computer data on his USB stick can it access my computer from his computer?

  my not my ex husband is bitter about the divorce.  He put my computer data on a USB key, it took him several days to do this, it is geek.  I have an icon on my desktop (lower-right on bar) that says USB manager and turned the RED yesterday. the two are connected and it is able to access my computer?  I think I am spied by him through my computer and I need to take action if this is the case.

  Hello

  "He put my computer data on a USB key, it took him several days to do this, it is geek.

  It does not take many days to put your data on a USB key.

  All we can offer is that you save your data and reinstall the operating system.

  If you continue to think that it spies on you, contact your local agency.

  See you soon.

• WRT160N: Cable Modem data light still flashes

  I bought and connect my new WRT160N to my new 30Mbs Ultra Vidéotron high-speed Internet service.  Everything is good except that data on the Motorola Modem Videotron's light is still orange flashing even when all connected PCs are stop.  This does not happen when I remove the Linksys router connection and connect my PC to the modem.  Agents tested Videotron connection and say everything is good at their end and the problem is with the Linksys router V3.0.02.  Thank you in advance,

  Most cable modems have a marked cable or data or D/Sled, which indicates the arrival of data from the cable network. Some users get scared that this LED flashes even when their PC is nothing or is turned off.  There is no need to worry: some data essential (DHCP and ARP protocols) is broadcast in wired network and happens to each cable modem if your PC needs or not. You worry that someone is trying to hack your PC simply because the data light blinks.

• why I'm unable to copy data to the USB in windows 7

  why I'm unable to copy data to the USB in windows 7

  Hello

  You don't say how you try to do.

  You can right click on the data you want to copy to the USB > hover the mouse on send in the list > in the Sub Menu that appears choose the USB by clicking left on it and the data must be copied to it.

  It is also to select the data you want to copy > press Ctrl + C > click in pen drive > press Ctrl + V

  Another method is to drag and drop the data from one drive to another.

  See you soon.

• I'm unable to transfer data to the USB key. He says I have no permission, please contact the administrator

  I'm unable to transfer data to the USB key. He says I have no permission, please contact the administrator... also not able to remove all the data from USB key

  Good so take a look here

  Run the FixIt first, then if that doesn't work, see these topics:
  • Faulty, misconfigured or missing device driver
  • Out-of-date firmware or BIOS
  • Incorrectly configured root hub
  • Remove and reinstall all USB controllers

• I have some important files on my desktop and the fear that one of my employees has copied that data on its USB...?

  I have some important files on my desktop and the fear that one of my employees has copied that data on its USB, is it possible to check if there was such a transfer, such as a history of copy, or something?

  In my view, the above question sums up all, I'm not that computer savvy, so please give detail instructions, and if there is way to secure these files are copied or sent by electronic mail, please let me know, if I can avoid these problems in the future. Thank you.

  You may not know a posteriori if this transfer took place. To prevent it in the future, lock your device by pressing the Windows key + L before you leave your office and keep your secret password.

• VSphere ESXi Update 1 to access the data on a USB key.

  I have ESXi Update 1 installed and you want to access the data on a USB key.

  (1) someone could let me know if plug a USB memory stick directly the ESXi server hardware is supported in update 1?

  (2) and/or could someone let me know how I can access files on a sick memory that is attached to the computer on which I have installed client vSphere on (I'm then going to the VM to the server ESXi from this PC).

  I want to just access the files (ona USB key) in the VMs (update information Lic) operating system. Is this possible?

  You will not be able to do, vSphere does not allow access to USB devices.

  You can try VMDirectPath with your USB PCI controllers, but anyway are still not supported.

  Marcelo Soares

  VMWare Certified Professional 310/410

  Master virtualization technology

  Globant Argentina

  Review the allocation of points for "useful" or "right" answers.

• LaserJet 4000 printing error with USB/parallel interface and DATA light on at all TIMES

  Laptop Dell Vostro 3700, Windows 7/32, Laserjet 4000, connected via the USB interface cable / parallel on USB001. Interface drivers and printer installed automatically after starting the update of Windows PC.

  Single document print OK.

  Document of several pages: printer data LED flashes then REMAINS ON permanently. Printed front page sometimes, sometimes not.

  After some time, box status Control Panel/print poster printer fault and a yellow exclamation point appears on the printer icon.

  No possible mistake OK with MS print Fixit. No other printing possible before initialization of the PC and then to new as shown above.

  Same printer connected via a parallel cable that is normal for old PC Windows 2000 print OK.

  Help, please!

  SOLUTION FOUND!

  A SOLUTION THAT WORKS: add only DC powered USB hub and connect the printer to one of the ports of the hub-s. Let Windows install the drivers for the USB cable and printer and printing is perfect!

  It is that the laptop USB ports do not have enough current or voltage, especially if some other USB devices are connected to the laptop...

• Dell XPS 420 not go, bright, flashing orange light orange on the motherboard, flashing green light behind USB on motherboard

  I am running Windows 7 on my XPS 420, I had updated the power supply two years back and installed extra ram and an SSD, a few months ago.

  I quit the PC last night, normally

  This morning, it is not booting, the light was blinking orange, including the connected mouse was blinking also.

  I decided to open it and check all connections; everything went well on the inside.  Before you open the PC, I unplugged all the extras connected like mouse, etc.

  The computer has actually started up normally and when I plugged the monitor it looked ordinary, he had reached the Windows login screen.

  HOWEVER, when I plugged the first rear USB component, the computer off and started to blink.

  I'm not sure what the problem is here.  My motherboard is fried?  I don't think it's the power supply from the computer DID resume after I noticed the blinking yellow light.  I wonder if the flashing of the earlier mouse and/or the flashing green on the back (inside the PC) of USB port average something else.

  Any advice is greatly appreciated

  AC360

  First check that all the cables for power and data are correctly connected, including the cables on the front panel.

  No difference and if you're comfortable working around computers, you can try the following:

  Note: The only 100% POWER supply test method, is to install a known working power.

  Unplug the power cord, hold the power button in for about 15-20 seconds, open the case, disconnect the power connector 24-pin motherboard and jumping the Green wire to one of the black wires, plug in the power cord and the power of the system, if the PSU, case fans and disk hard drive performance then the power supply can be good.

  Note: Do not remove the wires from the plug, use a small piece of wire or a paper clip as a rider.

  Extract supply and the system still does not work, yet once remove the power cord, hold button power in a few seconds to discharge residual power, reconnect the connector 24 pin to the motherboard.

  Remove any PCI video card [as appropriate], memory cards, all the devices, unplug data cables and power to all readers, check that the cable from the front panel is connected to the motherboard, without anything else connected to the system, reconnect the power cable and power the system on.

  If there is no difference in the diagnostic lights, of "Beep" codes and/or the indication of the LED on the power button, it would seem that the motherboard is dead and/or the processor and the only method I know to check a processor is perhaps install a compatible work PC, or use a known job processing.

  Bev.

• Satelite L775 used high power - orange light blinks 5 times

  Greetings,

  I bought my Toshiba Satelight new l775 7 months ago, it's so crazy. It used to be on, I use the laptop connected to the adapter 4 to 8 hours a day, then the laptop goes unused and unplugged for 16 to 20 hours a day.

  This is my 3rd phone, I know that I put more tension on the previous two (HP and Acer). I've never had a laptop go on me this quick, even this acer laptop $ 300 crossed more tension and never went out in the 15 months that I got it.

  My laptop backup is a HP of 4 years, I've had it for 4 years, its fell several times, used and abused still underway! I just had to level of ram and hard drive. But, this Toshiba! She was so beautiful when I saw him!

  I have never dropped it, never spilled something on it, so why she put me through that stress at a bad time?

  A bad time because even if I'm under warranty, I'm leaving on vacation in 2 days! I need it, I'm not trying to take my old HP that came out in 2008.

  I can't afford to send my Toshiba for 2 weeks, not immediately.

  Today, my anti-virus software was his typical scheduled scan, I didn't charge the laptop, because I was out of work, so when I leave the laptop gets used more and charged additionally. I look at the laptop and its judgment, I just thought, O... my battery died, I would plug in the adapter and do some reading. Nothing good happened. 8 hours later, I worked on it for more than 8 hours, I searched all over google, many forums, none of the following solutions worked for me.

  Disconnect the battery and press power for 30 seconds
  Unplug the adapter and press power for 30 seconds
  Disconnect the battery and the adapter and press power for 30 seconds

  (of course after the 30 sec thing, I tried turns on normally, with or without battery and power adapter).

  I pulled the little battery round, hard drive, memory sticks (even changed the 2 around and I tried each one solo) I tried without any ram. I unplugged all the excess material, the only extra things I had was my usb mouse, but I unplugged that, even pulled the CD-ROM drive.

  I removed all water-cooling, open the laptop to see if I saw something a coward, I don't see anything, the part where the adapter will seem a little loose, but it seems to go all the way and fine. I pushed hard and still nothing.

  One thing I will say... I read at least 8 other fairly new poster of Toshiba satellite owners with similar problems of their laptop does not turn on. This isn't a good glance, since this is the first product of Toshiba, that I bought it and it costs $500 more than my acer laptop which gave me no problem in my 15 months of owning...
  I'm not belittling Toshiba immediately, this problem might be a small question (I hope), I could be my fault, so I'm not belittling Toshiba again because I like a lot about this laptop, especially the graphics!

  Return to this topic after watching the discussions of people with similar problems, I noticed, nobody had the same exact problem I'm having. See most of the threads I have read, people would still get the orange light when the battery has been driven. I ONLY get the orange light when the battery is in the laptop. I try and power without the battery and nothing happens, no light flashes. Many other people were always other color lights or lights in different locations, my only light flashes 5 times, the second place left and is orange.

  The only light that blinked in the last 8 hours is the second light from the left (I think it's the power light) and it flashes orange or maybe its red light... but when I press the power (I tried holding, tapping, etc...) that the orange light blinks 5 times and stops, nothing happens I don't hear any readers of spinning, everything is just dead.

  Thanks for the time and help!

  Hi a8000

  Looks like you already tried all possible solutions
  The flashing light indicates that there is a possible hardware failure, but it is not possible to say what part is malfunctioning, it might be the motherboard
  However, the guarantee seems to be valid so don t waste time and report it to the service provider in your country, they should solve this Toshiba!