the dynamic types are not picked up by - ("com.vmware.library.vcaccafe.asd.customresources") .getAvailableInventoryTypes

Similar Questions

• Error "the dynamic disks are not supported by this operating system." what configuration Raid 0 (striped) readers.

  I have my operating system installed on a single disc, and I bought two additional discs I want to implement in a Raid 0 configuration. I'm going to administrative tools > computer management > disk management > right-click on a single disc and select the new striped volume > add the second drive and fill the dialog box until I get to the part where the formatting is supposed to start. Then I am stopped by an error that says "the dynamic disks are not supported on this operating system."

  Who says that hard drives, I bought are not compatible with vista interlacing or it says that vista can not the striped disks. What is the problem?

  You need to configure raid 0 before installation of win, you cannot "convert" s simple drive to the part of a matrix of blocks.

  In general this is not a good idea to use software raid, too a overload the CPU. If you want to raid, invest in a dedicated hardware raid card, which for a decent cost probably more than your motherboard

• The dynamic Types shows not all objects in the inventory

  Hello

  I thought I'd have a look at the new feature of dynamic Types in vCO 5.5.1 after falling on this tutorial: tutorial dynamic Types: set up your own Twitter plugin without any script, however - I ran into a bit of a problem.

  So I downloaded the plugin generator of dynamic Types package and run the creating a new plug-in (namespace and corresponding REST host) -it went very well and created the namespace and the REST host as planned.  I then ran the create a new type of plugin and followed through the forms of user interaction and validated all of the received data - it also has been correctly performed.  My only problem is, no instance of the type created is displayed in the inventory - and there are 100% at least of 4 objects returned by our REST API.  When I manually run the COE-> plug-in-> plugin generator dynamic Types - methods - > FindAll I see in the newspapers that it deploys the correct objects with the correct id/name - why these objects are not displayed workflow inventory?

  So this package that I thought I would use the provided standard workflow with dynamic Types plugin, so I added names/type space and automatically generated stubs of workflow for the type.  Then I went into each of these heels of workflow and filled in the script of "To-do" with the code to set the appropriate output, for example the workflow xxx.xxx find all uses the host REMAINS appropriate for an array of objects API JSON, and then iterates through these objects and calls the method DynamicTypesManager.makeObject () , before finally pushing them into the output array.  However, this does not show all inventory items is.

  In both cases I rebooted namespace of the inventory several times and nothing.  It seems that the DynamicTypesManager.makeObject () merely create the object in the local scope that I can see to create types of objects/correct data using System.debug, yet they do not arise outside the workflow and in token of workflow attributes, they remain unset.

  There is something really obvious that I'm missing? / someone at - it suggestions?

  Thanks in advance!

  James

  Please use updated Plug-in dynamic types here: version Technical preview of the plugin dynamic Types

  And update the plugin generator from here: plugin generator of dynamic Types package

• Cannot convert a computer unalloacted on a new space, dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  I have 179 GB of a 50 GB hard disk on a new computer allowed. Try to make a new Simple Volume I get following error "the dynamic disks are not supported by this operating system or the configuration of the server. Dynamic disks are not supported on Clusters", please suggest what to do, i run Windows 7 Home basic.

  Need additional details as
  Is it a laptop or a pc?
  Have you coveted your dynamic disk basic disk?
  What the structure of partition on your computer?

  recover with these details...

• Custom resource does not synchronize with equalize the dynamic Types

  Hi all

  Env: VCAC 6.2

  VCO: 5.5.2

  A custom resource is created based on the dynamic type in VCO. While some changes were made to DyanmicType - added a few attributes. When this custom resource is changed it shows no new attributes in the fields section. I have tried to remove/add endpoint external VCO, delete/recreate the resource custom, rebooted vcac device.

  Any help appreciated.

  Thank you

  tried to add a new DynamicType in VCO, hoping that this will force to refresh the cache. It seems that it worked. New fields are emerging.

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.

• Explore: Discover: Choose Details: Audio sample rate and the size of the Audio sample are not available in the list choose the details.

  With audio files (in particular the WAV), Audio sampling frequency and the size of the Audio sample are not the choices available in the list of details with Vista.  In earlier versions of Windows (2000 and XP) they were both selectable as details.  Is it possible to get these will appear under Vista?

  Vista - related audio details available:
  Album
  Album artist
  Bit depth
  Bitrate
  Duration
  Kind
  Year

  2000 / XP - audio related details are available:
  The album title
  Artist
  Audio sampling rate
  Audio sample size
  Bitrate
  Kind
  Title
  The track number
  Year

  FWIW, sampling frequencies are discussed in the Help window and how to (below).

  Reference: http://windowshelp.microsoft.com/Windows/en-US/Help/53adb4c7-d538-42f8-bb13-917379922afe1033.mspx

  Thank you!

  For the third part of the applications that perform many tasks, I usually discover www.tucows.com and www.download.com.  They have a wide variety of programs, and the trick is to put in the correct search terms to find what you are looking for.  Make sure you that your selection is compatible with Windows Vista and at tucows, try to pick one with 4 or 5 cows because they are the highest rated.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Message error "data of this type are not supported.

  Original title: cannot run files as an administator?

  I can very well run files (.exe, ect)
  I can't just stuff like an administrator lance. I usually get the error message: "the data of this type are not supported" I tried to pass microsoft too download a 'fix - it' too, but when I try to run too .msi it say 'Administator blocked privledges' or something of the sort.
  Everything works completely fine 100% in safe mode.
  It happened after I did a virus with malware bytes scan and deleted a virus derived from 'PrivitizeVPN' that is a VPN that was actually a virus.

  Hi Raul,

  Use the Microsoft Safety Scanner in full scan mode and remove all threats that is not detected by it and see if the problem persists.

  Microsoft safety scanner

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

  The Microsoft Safety Scanner is not a replacement for the use of antivirus software that offers continuous protection.

  Please make a backup of all the data to an external hard drive before performing a scan because it might cause data loss.

  Answer please if you have any questions.

• The directx features are not available

  Hello, I would like to help with this problem, I'm gamer so this problem if resolve would make me really happy, problems appeared a [not that my graphics card is integrated, because the first is slow], first I get my computer restarts without reason [without getting any blue screen] but when my system recovers, they say, it is a blue screen problem , I sometimes get that my office is not running and other times my explore does not work, but now I tried to see if this question is in my old graphics card but the problem of funds did not produce second [the problem is my office bar white Towers below]

  but with all these problem my games where quickly runs without any problem, but restarting, but now they won't even begin! and I checked the dxdiag and it turns out that the directx features are not available [all of them], but in my old its anything graphics card! Please help me out here because this graphics card is so good as the former and it worked before and thank you.

  Hello Mohammad.

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What is the full error message or code when you say, "directx features are not available?"

  I appreciate your efforts to resolve the issue. We will work together to solve this problem.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Please follow these steps and check the issue.

  a. open "Tool of DirectX diagnosis" by clicking on the button start, type dxdiag in the start search box, then press ENTER.

  b. click the "display" tab and then on the "DirectX features" tab, check if the 'DirectDraw', "Direct3D" or "AGP Texture acceleration" is marked as "not available".

  If this does not help, then use method 2.

  Method 2:

  Please use the suggestions provided in this Microsoft support article and check.
  Reference:
  Diagnosing basic problems with DirectX
  http://Windows.Microsoft.com/en-in/Windows7/diagnosing-basic-problems-with-DirectX

  Additional information:
  DirectX: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows/DirectX-FAQ#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How to restrict the scope of the EU change when the input data are not available?

  Hi Experts,
  
  I have a user enter-able (EU) field in the Section. When the tag input XML contains data for this field, then the value must print in this area and it is not editable.
  If the input data are not available only that one time that the field of the EU must be editable.
  
  Any thoughts?
  
  I tried like below,
  
  Domain name creation: UE_CompName
  Length: 15
  Type: alphanumeric
  Rule: XDD
  Source name:! Transaction/Compname
  under PreEdit,.
  module: DALW32
  Procedure: procedure of desired
  Information: CALL ("UE_CHECK")
  
  like that, I've updated in the field properties.
  
  Content of UE_CHECK DAL below,
  
  CurrFieldName = Fieldname()
  CurrFieldData = @("CurrFieldName")
  
  IF CurrFieldData! = « »
  SetProtect ("CurrFieldName")
  END
  But it does not work... Pls help me to do this...

  I assume that the 'mapping' occurs during a batch operation (Gendata) through any rule the XDD defined for this field. In the batch, pre and Post Edit calculations do not. This feature is related to the WIP/entry. What you can do is to add a level section - PostImageDAL rule to call your script and protect your land once it was located batch of your operation.

  In FAP that contains that field, add the PostImageDAL rule in the property of the rules in the Section box. In the data box, do call your script.
  Your script is a bit wrong, it seems you were trying to get the 'current' domain name and then check the value of fields. Drop the part and simply name your field in the string in quotation marks in the @ () function and the SetProtect.

• Timestamp for date columns data type are not imported in discoverer admin

  Hi all
  Someone you will suggest why timestamp data type columns are not imported into admin. discoverer other types of data import you correctly, but the timestamp data type columns are missed.
  
  Please let me know to change the type of data is not possible at this time.
  Thank you

  Hello
  You will be disappointed because the timestamp columns are not one of the recognized data types supported by the discoverer. He acknowledges only dates, strings and (integer and decimal) numbers.

  Maybe you could put up a view that matches the table you use, convert the timestamp in a rather ordinary date?

  Then, inside your end-user license, all you would have to do is redirect the folder to view.

  Best wishes
  Michael

• I want to see just all the Photos that are not in an album - possible?

  Hello

  is it possible to see all the photos that are not in the album?

  Photo on Mac

  THX

  Stefan

  Yes, create smart albums with the rule 'Album isn't everything. "

  For the file menu: file > new Smart album

  

  This album will contain all the photos that are not in any standard album.

• I have "upgraded" to FF5 and now have no refresh or stop icons in the menu bar, are not available in the menu "personalize." How to make a comeback?

  Question
  I have "upgraded" to FF5 and now have no refresh or stop icons in the menu bar, are not available in the menu "personalize." How to make a comeback?

  I'm happy to have helped.

  It was something that many users asked when he changed first, and I initially did not know myself that the order of the buttons would make a difference as to if a button or a pair of buttons would be displayed.

  If you mark the post as solved while he is recorded in the answer will appear in the results of research and may help others.

• I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same ID across the three devices apple

  I have House part for my iPhone and apple TV, but the iPhone libraries are not listed under computers on Apple TV.  I don't see libraries for my Mac.  I use the same identifier apple through the three devices. I have an iPhone 6 more working 9.0. The devices are all on the same home network running.

  You can't share a library that is located on an iPhone, iPod or iPad with other devices. You can only share a library that is located on a Mac or a PC with other devices. On other devices, iPhone, iPod and iPad for example, you then activate home sharing to connect to the shared library.

• How can I see the photos that are not in an album?

  How can I see the photos that aren't in an album in the App "Photos"? I noticed that in the Album 'Pictures' are pictures I thought I deleted already. I would like to see all the photos in an album, so I can finally delete them.

  You can go the the file menu Photos and click New Smart Album, and then set the condition of Album - is not. This will create a smart album that will show you all the photos that are not in any other album.