The Eagletree data logger program does not start

Similar Questions

• AiOSoftwareNPI (* .ms) the Setup program does not start when I start my computer.

  original title: AiOSoftwareNPI

  I'm having a problem with a software AiOSoftwareNPI problem (* .ms) the Setup program does not start when I start my computer.

  I know it's a Windows Installer but I don't have a disc with this route. I even tried to reinstall the windows xp disk and it does not work, I still

  get the same box when I shutdown and restart. The box allows me not to leave him continues to appear.

  Thank you

  Ms. C

  After doing a Google search for AiOSoftwareNPI and followed by the reading of many different threads in various forums, I found that it is for drivers for an HP all-in-One printer.

  You have an HP printer?

  If so, the usual suggestion was to place your HP printer disk in your CD/DVD drive and restart. After reboot would be installed the necessary files and the pop - up would more appear at startup. I don't know if it will actually work because in all the discussions I've read, none of the original poster never responded by saying that it worked or not.

  The next most common suggest was to download the latest driver for your HP printer to your version of Windows (including at the level of the ILO) and install it. Yet, not a single original poster has responded.

  In fact, if you have an HP printer I suggest to visit the web site of HP support below the link to get the latest drivers and their installation. Visit the support for the correct installation method and if you need to remove the old driver first. You can also visit the communities of Support HP for assistance (a link for communities is also on the next page).

  Support HP & drivers
   http://WWW8.HP.com/us/en/support-drivers.html

  Kind regards

• When I start most of the programs that is lock and on the taskbar it says program does not. How can I stop this from happening?

  When I start most of the programs that is lock and on the taskbar it says program does not.  How can I stop this from happening?

  Original title: Windows Explorer

  It is a good number with a boot drive (C:\ drive) that is cruelly of free space.

  A healthy walk NEEDS 20% free space at least to work properly and prevent your suspension system.

  Several causes are possible, but check your free space. Upgrade your hard drive if necessary.

  More RAM might help too.

  Check these before you attempt to update or install anything more.

• after update after effects cc 2015, the program does not start.

  Yesterday I did just a little update - now after update after that effects cc 2015 the program does not start. I have the message - aftereffex exe cannot start (0xc0000142) - an idea?

  Best regards

  Robert

  The update of the corrections after effects CC 2015 (13.6.1) is available. It fixes several bugs, including one in discussion on this topic.

  Details: http://adobe.ly/1QqMMc6

  Let us know how things work after installing the update.

• 6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

  6 Lightroom unbootable after an update... I reinstalled the software, but it still won't start? Updated through the creative cloud but still does not start?  What should do?

  My computer is a PC with Windows 10.
  Everything worked well before the Update Adobe Lightroom 6.
  The software was purchased in a shop (FNAC) with software to download map, it is saved in my account (Adobe) with its serial number. Why is this so difficult thing to reinstall Adobe software?
  

  
  

  I apologize for the inconvenience.

  Since it appears and disappears from the Task Manager, it seems that Lightroom crashes.

  We have seen this kind of problem on Windows 10 when Visual C++ Reditsributable 2012 update 4 is not installed correctly, it is necessary to run certain programs. You might have encountered until now Adobe programs that require it.

  Otherwise, there could be another cause of this accident and if C++ installation does not help, then you need to share the event viewer crash logs. See this article for in crash logs: Photoshop Elements Editor Help. How to find the crash logs on to Windows

• Install the printer driver HP LaserJet 3100 for Wind.XP worms. 1.1 the installation program does not start.

  An older version of Jet Suite Pro for HP Laser Jet 3100 for Win 2000 /NT 4.0 had run under XP (with an error during systemstart).

  After an update of Windows XP or this SW Jet Suite Pro to clean record no longer works.

  A new t CD - ROM HP with HP LaserJet 3100 Printer Driver Version 1.1 for Windows XP SW starts and stops after some time.

  The installation program does not run.

  At the stop "WOW. EXE does not react "."  "Waiting times for 16-bit system subtask ends." Part.System if necessary. instability.    End with OK Win16 system.

  HP after reclamation / question without help until today.

  Dieter Jansen

  Hello

  I suggest to Uninstall all the HP Laserjet Printer drivers and then try to install.

  For the second question, you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

• When I click on the Windows 7 Upgrade nothing happens and the program does not start.

  This is on a Dell Vostro 1520.

  I'm trying to reinstall an os upgrade Windows 7 32 bit.

  I am currently using Vista 32 bit. I sell the dell so I formatted and reinstalled 32 bit Vista OS.

  The computer was running on an operating system Windows 7 before the reinstall.

  Now when I click on the Windows 7 upgrade it does not load.

  When I try to open since the reboot it will not open either.

  What now?

  Hey, Slugger,

  New installation leaves you a better overall installation,

  Installation custom own steps

  You can use a Full Windows 7 or upgrade disk to do a custom clean install. This will remove all of your programs, but you can save your files and settings on an external storage before doing so. You will need to reinstall all your programs after installing Windows 7. Here are the steps:

  1. start Windows Upgrade Advisor to see if there are known problems that might affect installation and if you can install the 32-bit or the 64 bit version of Windows 7.
  http://Windows.Microsoft.com/en-us/Windows/downloads/Upgrade-Advisor

  2 back up your files and settings. To avoid losing everything that you will need to save copies of all files, photos and other information that you want to keep an external storage device. Windows Easy Transfer is a free tool allows you to copy your files (but not programs) from your PC and then transfer them back after you have installed Windows 7. If you don't want to use Windows Easy Transfer, you can copy the files you want to keep on a USB stick or CD/DVD.
  http://Windows.Microsoft.com/Windows-easy-transfer

  3. find the discs original installation and license/product keys associated to programs currently on your computer because you will have to manually reinstall your programs after installing Windows 7. Depending on what you have installed, you may be able to download programs from the Internet.

  4. Insert the Windows 7 DVD in your PC. When asked "which type of installation you want. Click on "Custom (advanced)." Note: 32 to 64-bit requires restart and boot from the DVD.

  5. when Windows 7 is installed, you can use Windows Easy Transfer (or a different backup method you used) to restore your files & settings and use your installation disks to reinstall all your programs. Then you're done - take advantage of Windows 7.

  Steps 2, 3and 4 are recommended for Dell not offering systems not Windows 7 installed at the factory. Microsoft Windows 7 Upgrade Advisor to check that all of your software and computer components are ready for Windows 7. This application will scan your system and make recommendations on what to do before the upgrade to Windows 7.

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?&docid=270659&doclang=en

• INSTALL A PROGRAM DOES NOT START AUTOMATICALLY, IN VISTA WHERE THE COMMAND IS RUN?

  PROGRAM DISK DOES NOT START AUTOMATICALLY, IN MS VISTA WHERE THE COMMAND IS RUN OR HOW DO I INSTALL THE PROGRAM?

  Click Start > programs > Accessories > RUN.

  http://www.howtogeek.com/HOWTO/Windows-Vista/enable-run-command-on-Windows-Vista-Start-menu/

  Link above will help you.

  http://www.mydigitallife.info/2007/02/17/how-to-open-elevated-command-prompt-with-administrator-privileges-in-Windows-Vista/

  And this will interest you as well.

  See you soon. Mick Murphy - Microsoft partner

• Just renewed my membership to the Muse and the program does not start, what can I do?

  I changed my billing data, the charge was made, but just Muse does not start. It is for me the survivor of the screen of your subscription again and again and again. What can I do? I have an urgent job to do.

  Refer to this:

  Log, activation, or connection errors. CS5.5 and later, Acrobat DC

  Delete the old information in the OOBE and SLStore folders and connect again.

  Mylenium

• After the motherboard replacement Tecra S2 does not start

  Hello

  I replaced the motherboard in my Tecra S2 and now it does not start, the power light is on but nothing on the screen. I can hear the h/d running DVD lights.
  I tried to remove the RAM.
  Also checked the CPU and still nothing.

  NEED HELP.

  Are you sure that the display is OK and correctly connected?
  Is busy, I mean drive HARD HDD LED flashes?

• Hung HP during the update of Windows. Does not start.

  HP woman desktop computer apparently hung during a Windows Update. A few hours later, she she turned off.  Now it does not start until after the blue HP screen.  I tried to boot from a backup CD, but nogo.  Cannot do anything on the blue HP screen (boot, diagnostics, etc.).  What are my options for the system restore?

  Thank you

  Doug Baumann

  {Information}

  Shut down the system. Just unplug the tower including the power cord. Press and hold the power for 10 seconds. Reconnect the monitor, keyboard, mouse, & power. Make sure that there is no cd/dvd in the drive.

  Restart the system by pressing F8

  You should get a screen that has advanced startup options

  Select "last known good configuration".

• Why the cd dvd burner motor does not start but will start to manual

  I have a E-Machines, does not start Windows Vista Home Premium 32-Bit, Windows media player or no matter what dvd burner

  Hello

  1. it worked earlier? If so, remember you have changed your computer?

  2. what happens when you insert a CD or a DVD?

  Run the fixit from this link to activate autorun and check to see if this helps: How to disable the functionality of Windows Autorun http://support.microsoft.com/kb/967715

  Note: click the fixit to activate autorun.

• Update the BIOS Alienware x 51 does not start

  After the BIOS level and rebooted the system, now it seems changed the configuration of startup and 10 Windows does not start.

  I checked the boot options and saw that one selected is now Legacy of start and it seems that Windows 10 works with UEFI.

  Should what boot option I set by default in the BIOS so that window 10 restarts automatically?

  Any help would be apreciated.

  Hello

  Boot option should be UEFI. Disable secure boot, and then on the Advanced tab > Integrated devices: change SATA AHCI mode.

  If the problem persists, press F9 to return to the default settings.

  Let me know how it goes!

• Need help, use the control Timer my application does not start

  Hello guys

  I have problems, follow the example signals and Slots, but when my application is running, it does not start.

  If I delete all the code that deals with the Timer control, it's working again, my theory is that the CustomTimer library does not stunts

  Can you help me?

  Thank you very much

  My guess is many people have followed this during the first startup, I certainly did and it worked for me.

  It's probably something simple, missed, without seeing your code it's going to be difficult to diagnose.

  My first advice is always to check the log and see if messages are coming that may be related.

• 12 c on the repository server management agent does not start due to a failure of the system

  My environment architecture for 12 c Cloud Control (used for the purpose of personal practice) can be explained as follows:

  @DBSERVER: (OEL6.5, x 86-64)

  -12 c Enterprise Manager Cloud Control (EMCC)

  -Database 11.2.0.4 which acts as a repository for 12 c EMCC

  Monitored host is on a virtual machine (VM12) which is currently in the DBSERVER:

  VM12: (OEL6.5, x 86-64)

  -12 c Management Agent which monitors host and database (12.1.0.1)

  The server worked fine for months until recently when the computer has restarted abruptly. Abrupt restart has occurred several times in the past, but this time, he had a problem when restarting. The DBSERVER when a startup starts the SGC and the AGENT. WHO starts perfectly, but the AGENT does not start. On trying to start the agent, it displays the following error message:

  [orcl11204g@dbserver bin] $. / emctl start agent

  Oracle Enterprise Manager Cloud control 12 c Release 3

  Copyright (c) 1996, 2013 Oracle Corporation.  All rights reserved.

  Starting Agent... failed.

  Manager of target failed to startup: targets.xml was rejected: loaded with a token incorrect agent

  See emctl.log and emagent.nohup in: / home/u01/oemrel3/agent/agent_inst/sysman/log

  [orcl11204g@dbserver bin] $

  The targets.xml file contains the following information, which do not seem to be of any help:

  [orcl11204g@dbserver emd] $ cat targets.xml

  <? XML version = "1.0"? >

  <>targets

  < / objectives >

  [orcl11204g@dbserver emd] $

  Anyone can provide assistance in such circumstances?

  The DBSERVER repository database, the auditor and the who are running, while the agent is down. VM12, listener and agent database is running. Is there another file that should be checked for more information?

  --> $/ AGENT_INST/bin/emctl stop agent

  If the agent does not stop is free then kill all the background process agent first grepping for agent perl and java process only

  --> Move your existing target.xml file

  MV target.xml target.xml.old

  --> Create an empty file targets.xml under/AGENT_INST/sysman/MDTs with the below content

  --> Start the agent of

  $AGENT_INST/bin/emctl start agent

  That starts agent but without all the targets in targets.xml

  To the discovery of targets saw agent console resynchronization

  Concerning

  Krishnan