The error occurred on line - 1

Similar Questions

• Is unable to connect/add the host to the CR - error: another error occurred at line number 7, not well-formed (invalid token)

  Hello!

  Having a problem with a server ESX 3.5 and VC2.5. Two days ago it became (not answer) in VC and I could not reconnect. Using VI client I can connect directly to the host. I ping the ESX other EWX hosts and to the client with VC.

  I tried mgmt-vmware restart and restart av vpxa. A restart of the ESX host has not helped.

  I have her disconnect the ESX and when trying to connect, I get the Connection Wizard, but when you add the server name and root I get an error saying:

  General error: another error at line 7 number, not well-formed (invalid token) and cannot continue.

  I saw another discussion in the forum saying ban the CDP but that did not help.

  After removing the server ESX of VC, I'm trying to add hos, but run into the same error. I see no particular error in newspaper except errors in certificates, but I'm not sure that that's about it.

  It's one of the things that I read in the newspaper about the VC client:

  Unexpected error connecting host host3.kun.local: incomplete header received

  GetChanges failed on the host /vpx/host/#7863 /: vim.fault.NoHost

  Set the error code of connection (-2) for the host host3.kun.local

  Anyone with any ideas what to look for?

  I'll try to remove vpxa and vpxauser # rpm - e Vmware-vpxa and # userdel vpxuser and see what happens.

  Carpet

  That's good news, glad to hear that the problem has been resolved.

  If you found this information useful, please consider awarding points to 'Correct' or 'useful '. Thank you!

• "Cannot install update and the error occurred ' iOS 9.3.2

  Try to upgrade to 9.3.2 but get "cannot install update and the error has occurred" if I am on WIFI or via iTunes. Someone else?

  Go to settings > general > storage & use iCloud > manage storage (the first) > and if there is an update, delete it. Then go to settings > general > Software Update and try again.

• When you try to activate Windows 7 Ultimate, the error occurs: code: 0 * C004F063

  When I try to activate my windows 7 ultimate with the product key. the following error occurs: code: 0 * C004F063, Discription: the software licensing service reported that the computer BIOS is missing a required license. Please solve my problem, thanks.

  Please run the Microsoft Genuine Diagnostics Tool then copy and paste the results into an answer here for further analysis:
  http://go.Microsoft.com/fwlink/?LinkId=52012

• VCB: Another error occurred: at line number 7, not well formed (invalid token)

  I get the error message:

  2009-06-12 17:10:00.795 "vcbMounter" error of 2284 Error: Another errorencountered: line number 7, not well formed (invalid token)

  When I use the vcbMounter.exe (the same with vcbVmName.exe) of the VCB Proxy with the option "-a name: vm - name", since last week.

  With "- an ipaddr:vm - name ' it works well. We did not updates or upgrades at this time.

  Maybe a problem with a special character in the name or description of a virtual machine, but I can't find it.

  In the Victoria Cross are more than 1000 VM. Can anyone give me a tip how to find this character, or is there a differnet solution?

  Thank you very much

  Guenter

  Hello

  If you have a special character in the vmname, try with escape character.

  -@m!t

• When the return of large amount of XML, the error occurred.

  Usigng HTTPService call oracle database and return more than 2500 lines load in XMLListCollection. This is the error. If the return less than 2300 records, it works very well.

  Can anyone help on this?

  The problem that happened before the load in the application. -Request HTTP error. How can I break ths XML file in several regions and load in XMLListCollection?

  Thank you in advance!

  Thank you for your attention. I found a way to do it. Break in small pieces and works very well.

• How to change the background of the entry fields, when the error occurs

  Hello
  
  We have an obligation to change the background color of the input fields when an error
  occurs (by default its red). I tried all selectors overall but, did not find any solution in css
  to change this.
  
  Can someone help me...
  
  Thank you
  Praveen.

  Hello

  af|inputText:error::content
  {
      background-color: pink;
  }
  

• Oracle Data Integrator: what is a failure and where the error occurred

  I have a package with three steps (scernarios for interfaces). I'm using ODI 11 g.

  Allows to call their stepA, stepB and stepC. Each step of the interface loads the data from a source to a target table table.

  If stepA is OK, go to step B otherwise OK (fail), send an email.

  If stepB is OK, go to step C, otherwise OK (fail), send an email

  If stepC is OK, then fine, if not OK (fail), send an e-mail

  All measures have an arrow "ko" (not ok) goes to the same sendEmail icon in the diagram.

  Issues related to the:

  1. What is a failure of a step?

  (a) if the Chronogram of source is found in the error table $ E instead of going to the target, then that is considered a failure?  Or other fatal errors which made a failure?

  The reason records go to the table of errors could be a violation of the integrity of data on the target constraints, or other application level constraints such a salary must be greater than $ 100.00.

  2. in the body of the e-mail message, how to capture what stage has failed?    I have this text in the body of the message

  "Package execution error. After the failure of step:.  < % = odiRef.getSession ("SESS_NAME") % >'

  but the getSession('SESS_NAME") returns me the name of the package that is running, not the specific step that failed.

  Thank you

  Mr. Jamal

  (1) it depends on what thresholds error that you defined when you set up your CKM in the flow control and the steps that compose KMs, for example if you have chosen to ignore errors.

  (2) you must use < %="odiRef."> getPrevStepLog ("STEP_NAME") % > or <%=odiRef.getPrevStepLog("SESS_NO")%>

• Find sql stmt in which the error occurred

  Hi, I've been accounting application in which some action was causing an error in unique constraint violated. If I find the declaration of origin of the error and I have enabled tracing for this session of sql and converted to a format readable by using TKPROF.
  
  It shows the list of the sql stmts but how to find the stmt that caused the error.
  
  Is there any other way to find?

  If you have:

  ERROR #5:err=1 tim=2045165
  

  search for 'PARSING IN CURSOR #5' (# is the number of cursor in the trace file):

  PARSING IN CURSOR #5 len=26 dep=0 uid=5 oct=2 lid=5 tim=20451242745 hv=2976344882 ad='3be614ac'
  insert into t(x) values(1)
  END OF STMT
  PARSE #5:c=171601,e=270693,p=0,cr=10,cu=0,mis=1,r=0,dep=0,og=1,tim=20451242738
  

  Edited by: P. Forstmann June 6, 2011 14:02

• When you try to open and then immediately the error occurs.

  

  When you try to open then immediately the error.

  See here, Douglas.

  Beat

• creation of DVD Windows guard give the error message indicating the error occurred when burning the dvd

  I'm trying to use creation of Windows DVD to burn a DVD. The program starts in mode "coding" and after a minute or two, I get an error message informing me "cannot create an error has occurred when burning the DVD DVD»  Can someone tell me what to do?

  "DVD burning speed. This option allows you to select the speed to burn your DVD. The default value is the fastest growing. Some DVD burners do not burn at full speed if you use certain types of DVD. If you have a problem burning a disc, try selecting medium or slow. "Also try another brand of blank DVD.

  Change Windows DVD Maker DVD-Video settings
  http://Windows.Microsoft.com/en-AU/Windows7/change-Windows-DVD-Maker-DVD-video-settings

  See if there is another program interfering.

  How to perform a clean boot for a problem in Windows Vista, Windows 7 or Windows 8
  http://support.Microsoft.com/default.aspx/KB/929135

• Hard drive erased, now receive the error occurred trying to read the boot configuration

  I erased my hard drive but when I restarted my computer, it said that there is an error then produced than that to read the boot configuration, I tried to use the windows vista download recovery disc but when I turned on my computer nothing the same thing appeard. HELP PLEASE!

  * original title - I erased my hard drive but when I restarted my computer, it said that there is an error then produced than that to read start configuration.*

  Here's how to use the Vista startup repair disk. is NOT a Vista reinstall disk.

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  How to reinstall Vista:

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, Acer, recovery disk/s etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• iTunes won't install on Windows 7 64 bit, get the error occurred during the installation Assembly

  When I try to install, I get an error like this:

  snapshot
  Help, please!

  An err linked to a 32-bit program, you install the 64-bit version of Itunes?

  See http://www.apple.com/support/itunes/ as his program

• Windows could not format a partition on disk 0. The error occurred when preparing the partition selected for installation. Error code: 0 x 80070057

  So I just finished my first build. All this POST-ed fine, but I can't get 8.1 Microsoft 64-bit OEM installed on my SSD.

  At first I could start a custom installation and it went through fine until the first reboot. This is where it says "disc error". I tried again hoping it would go but noticed a 350 MB "System reserved" Partition with the rest of my space unallocated in my 1st attempt to install.
  I googled this problem and was told to remove the reserve system, so Windows could create its own partition, or something of that kind.
  Installation works well until you restart again, where this time it says press any key to boot from the cd drive or something of the sort so I don't hope that Windows 8 would be to continue the installation. However, he wanted to just restart the entire system again!
  I try once more in the hope that it would work, I remove the additional partitions created and repeat and this time I can't even begin installation due to the message in the title of this post.
  Since I was:
  -Make sure SSD has been selected for AHCI (it was already on it)
  -Reconnected given SSD + cables power as well as the CD player on shutdown and reboot
  -Run Diskpart to repair the boot with these commands:
  -diskpart
  -disk list
  -select disk 0
  -clean
  -output
  Same error code came again after attempting to reinstall. So I tried a few other commands:
  -diskpart
  -disk list
  -select disk 0
  -clean all the
  at this point, he said: DiskPart has encountered an error: the request could not be performed because of an i/o device error.
  Someone please help!

  Try to create the new partition and do. for example, to verify the steps for Windows 7-

  http://support.Microsoft.com/kb/2476568/en-us

  Likewise, create a partition first.

• the error occurs when I install Adobe Flash Professional CS5.5 on windows server 2012?

  an error message displayed "Please insert Adobe Flash Professional CS5_5 disc to continue" on the stage of the installation, the installation file works fine on my system windows 8, but not on server windows 2012, any sugguestions? Thanks in advance!

  Products Desktop don't are usually not supported on server operating systems. Find you things on your own or you don't.

  Mylenium