Cannot find the RAM specs
Does anyone know the maximum RAM support for a HP Pavilion dv7t-4100? I've been googling and the HP website, but I can't find it anywhere...
HI: Here is the link to the service manual for your laptop. http://h10032.www1.HP.com/CTG/manual/c02666747.PDF Chapter 1 page 3 has the memory specifications. You want to PC3-10600 (1333 MHz) memory (2 x 4 GB if your laptop computer has a processor dual-core). If it has a quad core, you can probably install 2 x 8 GB of memory. Don't get PC3 10660 or 10666 memory.
Tags: Notebooks
Similar Questions
-
Cannot find the RAM for my iMac
I can't find my DIMMS (1333 mhz for an iMac mid-2011) on the Apple Store. I even searched the model # (PC3-10600) and they are apparently non-existent Apple is concerned. So I started searching Amazon, etc. I looked for that model # and a lot of sources that seem to match the specification EXCEPT that they were all the 240 pins. I can't find a 204 pins. What is going on? My Mac has really slowed down with all the OSX improvements and so on. I want to add 2 DIMMS to 4 GB, but I don't want to order something on the market after if it does of course. THX.
Check that... I've did some more research and I found some 204 pins. Interestingly, several of them say 240 pins. What typo perhaps? Is it reliable aftermarket DIMM? Who are the good manufacturers?
-
Win 7 Pro, FX6100, 8 GB of ram, 250 GB ssd; cannot find the system partition
Basics are there. It blocks from the tent to set up partitions. I am giving all of the 250 GB SSD to use as seems it and it is just lost. It does work with no partitions, partition of the entire disk. He didn't tell me what he wants. And error messages make no sense.
They are like: (and my response)
cannot find the system partition (do a stupid)
Can not find the installation partition (crikey, I gave you the entire disk, make one)Talk about mega-frustration. How about a useful error message and some useful ways to respond.
>:-((
If the ssd is not recognized in the first part of the installation process, as a location to install win on, you need to check the manual of the card mother about all the necessary bios for its port settings, or weather, you need to install any third-party disk controller.
And if it's a new ssd, must not contain any partition table, unless you have prepared this ssd when you started in one of your other installations win, that can be part of your problem.
-
Original title: getting specific files
I try to install Nero 10 Multimedia Suite Platinum HD, but it will not be installed because it cannot find the following files: VC Redist 2005 KB973544 (x 86)
VC Redist 2008 SP1 (x 86) Direct 3D 9 Extensions 9.19.949.46 9.19.949.1104 9.24.950.2656 9.27.952.3001 Direct 3D 9.27.952.3022 HLSL compiler
Reboot Validator
My system is XP SP3 2 Gig of ram and all updates are underway.
Hi DJ Wilfred.Download the stand-alone package of these updates and install it manually and check to see if it helps to fix the problem:In addition, refer to this article: -
I'm installing MS wic_x64_enu.exe and get the error message: «Setup cannot find the update.inf file needed to update your system» I run SFC.exe and found no errors. I also reinstalled. NET40. and I still get the same error message.
I am Windows 7 Ultimate SP1 64 bit on a HP PC with an AMD Phenom 9150e Quad Core processor 1.8 GHz and 8.00 GB RAM.
I worked on it for a few days without result.
Any help will be much appreciated.Giles
Try this search http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_install/windows-imaging-component-installation-fails-in-my/a13c1e1d-361e-4601-8fc4-4d416edef853?tab=AllReplies#tabs in the registry.
Run-->--> look forthis key regedit. Already installed.
I have encounterd this problem by reinstalling .NET.
-
Cannot install VMware ESXi 4.1 "cannot find the image of the installed system.
Started in iso ESXi 4.1 downloaded, burned on a CD, CD, go to the screens, press F11 to install. Immediately get the following error:
-
The installation operation failed!
The installation operation encountered a fatal error:
Cannot find the image of the installed system. This is due to the image being not mounted correctly or the CD-ROM not supported.
-
The material is a system of handcrafted with Intel DQ35JO Council, latest version of the BIOS, Intel E6850 CPU, 8 GB of RAM, 2 SATA drives. I know this isn't on the list compatible but is a 'white box '. I installed ESXi 3.5 on it in the past and got it working, and I saw other success stories with this Board/CPU. Yes, I have activated the virtualization mode in the BIOS and powered down/up.
Here is what I tried:
-Redownload VMware-VMvisor-Installer - 4.1.0 - 260247.x86_64.iso to ensure that it was not corrupt (2 copies, against perfectly)
--Also tried another drive (IDE) CDROM
-Created a bootable USB using uNetBootin 4.7.1 and booted from it
-Switched SATA setting in the BIOS from AHCI to IDE
I get the same exact error. I searched here and everywhere and don't find any reference to this error.
Help - all do you offer for my next step?
Have you had a previous vSphere installed on your system?
I had the same error on my 'white box' (in fact, it is black). I used to run esxi 4.0 (u2) on my Acer X 3300 (6 GB, Quad Core AMD Athlon II). Controllor internal SATA is not supported, but it allows me to use the box for normal windows task and ESXi is sitting on a SDHC 4 GB flash card.
When I started my freshly burned ESX4.1 cdrom, I got the same error. I thought that the fact that maybe there was an existing install on my destination drive (the flash memory card), and that the CD could not perform an upgrade.
So, I tried the upgrade path (first trying to utility of the host and the .xml error message). After reading the manual, I did the upgrade from 4.0 to 4.1 using the device of vMA and I must say that esxi 4.1 works great on my white box.
Then I suggest that you try upgrading and see how far that gets you.
Good luck (and a beautiful weekend)
Marino
-
I tried all these steps and still no progress, cannot update or restore my phone. When you try to restore an error appears saying 'cannot find the phone (9).
We do not know what are the following steps, because you have not provided their. Support this article has suggestions for your specific error code.
If you see errors 9, 4005, 4013, 4014, when you restore your device iOS - Apple Support or
-
Cannot find the seetings camera
Cannot find the camera settings in firefox os smartphone
Hi sanatankumarsahu,
What settings to configure for your Firefox OS device camera?
There is no specific menu of camera settings, but depending on your device and the version, you can choose another camera, turn flash power or reset the focus.
Please reply to this message with your Firefox OS as well the version and the Build ID device model so that we can give you a definitive answer.
Thank you
-Ralph
-
Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.
Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...
-
Message "Safari cannot find the server.
In all these days, I get a message 'Safari cannot find the server' on a regular basis despite the fact that I'm connected to the internet and the server is a real server, such as Google or other sites that I use all the time.
Is there something funky past with Safari that it would suddenly start happening?
1 disable Proxies if selected.
System Preferences > network > advanced > proxies tab
Unlock the lock if you have to.
Under 'Select the Protocol', uncheck if checked.
Click 'OK' and then 'apply '.
2. If this does not help, run EtreCheck and post the report here.
Download, open the download folder, click on it to open it and select "Open" in the dialog box to execute.
Click on the button "Report share" in the toolbar, select "Copy to Clipboard" and then paste it when replying.
-
"Safari cannot find the server.
I have not had this happens in another version of Safari, but since the update more recent (9.1.1 on May 17, 2016), I get the following message several times a day: "Safari cannot find the server. Refreshing the page does not help. After I visit some other sites, I am able to connect to those that I had a problem with. Most of the information I could find going back five or more and seems not applicable. It is not necessarily the same sites that don't load. It is random and occurs throughout the day. It's annoying and sometimes embarrassing, but I'm dealing with it (I didn't wish)!
Does anyone else have this problem? Is this a bug in the latest version of Safari and there at - it an easy fix? Any advice will be greatly appreciated.
Thank you.
Hello
Could be a cookie problem...
In your Safari menu bar, click Safari > Preferences then select the Privacy tab, then click: delete all data Web site
Quit and then restart Safari to test.
-
Setup error "the system cannot find the specified file" (hpzprl40.exe)
Trying to install HP Photosmart c5180 all-in-one using the latest version of the software download at HP and have Windows 7 Asus desktop computer. Receive error install "the system cannot find the specified file" (hpzprl40.exe), and the wizard stops. Help, please.
Hi loveisus,
Try using the brush included in the CD or download. Let me know what you find?
Of the Original installation CD:
1. Insert the CD in the drive and then cancel Setup
2. open my computer and click right then on the CD from the drive and select open
3 open the Util folder
4 open the CCC folder
5. run the uninstall_L4 (exe or Bat)
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
9 download drivers and full software features
10. run the download to reinstall the printer
If the software has been downloaded and extracted to your system:
1. type % temp % in the field of race
2. Locate and open the folder starting with 7z (example: 7zS2356)
3 open the Util folder
4 open the CCC folder
5. run the uninstall_L4 (exe or Bat)
6. once the uninstall is complete, restart the computer
7 run the Accessories\ System Tools Disk Cleanup
8. download and install the latest version of Adobe flash player
http://www.Adobe.com/support/flashplayer/downloads.html
9 download drivers and full software features
10. run the download to reinstall the printer
-
Often, I get the message error "Firefox cannot find the server.
Often, I get the message error "Firefox cannot find the server. Page normally, refresh the page to load, even if sometimes it takes more than one try.
I checked my connection settings. IPv6 and DNS prefetching are disabled, according to the recommendations in this article: https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can?s=Firefox+can%27t+find+the+server+at & r = 1 & as = s
See also:
- http://KB.mozillazine.org/Error_loading_websites
- https://support.Mozilla.com/kb/error+loading+Web+sites
You can try to reset (power off / on) of the router.
-
Hello everyone!
I have a damaged database. I decided to try to restore. VD, I created a new database and imported all the tables, queries, forms, reports, macros of corrupted to the new database.
However, when I try to open most of the forms, I get the error message:
"Microsoft Office Access cannot find the macro 'TrackDBaseForms '.
The macro (or its macro group) does not exist, or the macro is new, but has not been saved... »
This basis has worked for a year, and I never had this problem. A Google search returns no results. However, it is obviously not in the macros page, or in any code I can find.
I have supports this database for a year and have never encountered this missing macro. A Google search returns no results, so I guess it's something that the developers at the beginning. However, it is obviously not in the macros page, or in any code I can find.
The corrupted database is such a State that it will not be open to all: the main form that is set to open at startup corrupts. MS Access 2007, size 500mg.
Thank you!
Have u tried looking for hidden objects?
Go to Tools/Options and view the hidden objects to open the database without starting. You can press the SHIFT key , and then open the DB. Note You may need to do this a few times.I hope that this recommendation will help you. In extreme cases, you can restore the data file via the repair tool of ms access as the Access Recovery Toolbox . http://www.oemailrecovery.com/access_repair.html
-
Mini 101NR - restore to fail, error message "cannot find the file.
While restoring my Mini 1010NR with 8 GB SSD from the disk of XP SP3 operating system, everything fine until partially through the recovery an error message saying that it cannot find the i386\ASMS file.
I tried the options "install fresh copy" and "repair" and get this same error message in both directions.
I formatted the SDS with both regular and quick NTFS file system. My OSD software gives me the possibility of formatting of the SDS with fat? I have not tried. That I should?
I looked at the CD, and in the i386 subdirectory, I see a subdirectory called ASMS. I see several subdirectories in this directory.
I am booting from an external CD/DVD drive. This seems correct, as the installed much restoration program file until stopping in the message saying that it couldn't find the file ASMS.
This OSD provided with the computer when I bought it new at HP.
Thank you
Peter
The cd is corrupted or damaged or installation loses communication with the CD-ROM drive. If you can, try another cdrom drive.
Maybe you are looking for
-
upgarding memory from 4 GB to 8 GB
Can I upgrade my MacBook Pro 13 "mid 2012 memory from 4 GB to 8 GB? How much can it cost to change? and there will be an increase in the speed of my mac after upgrading memory?
-
How can I clear your Cache? Son of game will not work unless he would do that.
His game is called Club Penguin. It works on other computers but mine. Club Penguin says that I should probably clear my Cache. This has happened Each time Firefox opened Is maybe a few weeks.
-
How can I get updates installed ONLY at the request of time?
I have a specific time for my updates to be automatically downloaded and installed, and yet they are always popping up at random times. Really, I don't want turning turn them completely off, but I don't want to download any when windows has an updat
-
Tags created in the Windows Photo Gallery are not available in xp.
I have marked all my 30 000 photos in Windows Photo Gallery. My Vista computer is dead and the tags are not available in XP. Is there a way to access all the tags, I created in order to sort and display them by tags.
-
Microsoft isatap adapter, get the message "this device cannot start code 10".
have you tried the driver from the web and update manually update but it States driver is up to date?