the errors are at low cost

After checking my script to find errors and finding none, I compile it. Is not uncommon, I get a list of 100 errors that are similar to the following:

ScrollThumb.as, line 60 there is no property with the name 'useHandCursor '.

I do sequentially and test several times to ensure that I am not transferring whatever it is that's causing the problem. (in particular, look for component problems.)

Tags: Adobe Animate

Similar Questions

Epson Stylus CX9300F printer getting the error "paper is low or empty.

I just added my Epson Stylus CX9300F printer to my laptop Windows 7 (64-bit) and the resolution of the problems are saying that there is 'no paper' in the printer... I also use this printer with my Office Windows 10 (64 bit) - and it prints perfectly fine from this source.

Does anyone have any ideas as to why there is this error display "paper is low or empty" on the laptop?

Soon :)

Hello

I suggest you try it please add the printer manually:

Click "Start" > click "devices and printers".

Click on "add a printer".

Click "add a local printer.

Click on "Create a new Port" > scroll down to "Standard TCP/IP Port" > click "next".

Type the IP address of the printer and click "Next".

The printer must be found and use the USB driver that you have already installed, if the driver is not used you will need to add the driver.

I hope this helps!

activate the audio service I did everything what the engineers have suggested and I still get "...". Windows audio service is not enabled. ». Vista and the error are sometimes get is 1079.

I did everything what the engineers have suggested and I still get "...". Windows audio service is not enabled. "I've tried everything suggested to obtain a permit. I am running vista and the error is sometimes get is 1079.

Help, please. randean

Hello
I tried, but I can't yet begin widows audio service even if the windows audio endpoint is fine. miracle happened just after I tried one of the recommended web u, it finally works. IM so happy.
the solution is to change the name of connection for NT AUTHORITY\localservice
Thank you very much
Have a nice week

Seera

In Windows 7 when you try to copy files to an external hard drive, getting the error "are you sure you want to copy this file without its properties?

I know there have been a few posts on this in the past, but I have a slightly different query.

To copy files from my drive NTFS of Windows 7 64 bit for my Western Digital My Book World Edition II 2 GB player manually, not with the WD software provided), for some files, the following message appears.

"Are you sure you want to copy this file without its properties? The X file has properties that cannot be copied to the new location. »

After investigation, it appears that Western Digital My Book World Edition II is not NTFS format and is, in fact, driven Linux.

Their technical support has confirmed that, despite the message, it is safe to copy files and rely on this backup (I want to backup my drive HARD whole so I can do a clean install - so it's really important!).

Is anyone able to advise exactly what means the message in terms of properties lost?

If you right-click on one of the files in Windows Explorer, then select Properties, you will see the Details tab of the properties he wouldn't if the files have been copied to a drive not NTFS. They are written in an Alternate Data Stream (ADS), and the FAT format readers include ADS.

It depends on the file type of the importance of these properties. If you have spent a lot of time, adding titles and comments and authors and authors e-mail addresses to docprops your Word documents, for example, that the work would be lost.

If you can live with the loss of these properties, go ahead - standard properties will be re-writings in the file when you restore from backup. It's of course time and resources.

To avoid this problem, format your external drive to use the NTFS system.

Noel

Addition of a generation of finite pulse delay generates the error-200305

Hello

Sorry, I'm relatively new to the generation of pulses. Please help me understand why I get an error-200305 in my example VI Test Pulse Generation.vi when you specify an initial period. Other than the creation of a task and giving it a name, the code looks the same for me as the code in the example LabVIEW Gen dig Pulse Train - finished - Dig Start.vi comes with LabVIEW. When I enter the same settings in Gen dig Pulse Train - finished - Dig Start.vi, I do not get this error. What could happen?

I use a DAQ OR-PCI-6031E map on a 64-bit Win7Pro and am under LabVIEW 2011 (64-bit).

Thank you for your help and forgive me for a perhaps trivial question.

Peter

Hi pbuerki,

I tried the 2 screws you attached and found that if you replicate math you used in "Generation of Test pulses" for entries of the example VI, VI example will give you the same error. I think your VI and the example behaves exactly the same way.

However, I found a solution for this error. I tried this on a simulated device, but I think this should work for your physical device as well. For your DAQ card, he sometimes give you the error at very low frequencies because the default driver is the basis of time of 20 MHz and for some combinations of frequency and the number of pulses, the time base produced more ticks than the counter can handle. To work around this problem, you need to use a DAQmx channel property node. You will need to use the CO. Channel CtrTimebaseSrc property to set the time base to be DevX/100kHzTimebase. You must activate the setting 'Understand the advanced terminals' in the name of I/O filtering to find. This change should fix your error.

12.2.4 WebADI - Integrator custom fails to cleanup script is triggered when the import returns the error lines

Hi, hoping for help because it is not very useful detailed documentation on this topic here.
I built a custom WebADI that uses custom procedures to validate and download the date in a custom table. I then called an importer script that checks the balance of files (and other things) and mark the lines that do not reach a State of error. I also managed to get these errors to be selected by the definition of error line and message error search section and everything is right with the world.
Except that when imported and reports to hide the sad faces appear in the worksheet, I expect the cleanup script then learn to delete the records so that when the errors are corrected in the spreadsheet we don't get the lines in double... and is not. No amount of tweaking, etc. application errors will result in cleaning the fire.
Can someone tell me what I need to import of PL/SQL program to do when it detects a mistake for execution of the cleaning procedure?
Thanks in advance
Mike

IT FIXED myself.

The downloaded must be a function and return an error message of VARCHAR2. If you return NULL - then the cleaning is not called as expected. If you return to any string, then cleanup is called.

get the error ORA-04088

Hello

I created a trigger to trigger the error if a trial off to enter data in a column that is attached to a number sequence.
This trigger works, but with errors, these errors become after trying to insert values into the table.

The errors are:

Insert into test2 values(24,'horse','hyderabad',30); - 30 here is worth attempting to enter the column use
Error report:
SQL error: ORA-20101: insertion of the value to enter the not allowed... It will take the auto-numbering
ORA-06512: at "SCOTT. TRI_UNQID', line 11
ORA-04088: error during execution of trigger ' SCOTT. TRI_UNQID'

My trigger is

create or replace
trigger tri_unqid
before insert on test2 
for each row
declare
v_number number(2);
ins_exp exception;
begin
if :new.regid is not null  then
raise ins_exp;
else 
select unqid.nextval into v_number from dual;
:new.regid:=v_number;
end if;
exception
when ins_exp then
raise_application_error(-20101,'inserting the regid value not allowed.. it will take auto number');
end tri_unqid;

Output:
It's the execution and throw my exception and other... I am not able to solve...
and another point is if it is inserted successfully with errors, then it's values are inserted into the table at the front not the end of the records... How is it going...

can any body explain

Thank you
Baba

Published by: BluShadow on April 11, 2013 10:26
fixed {noformat}

{noformat} tags.  The "code" in the tag is enclose in "{" and "}", not "&lt;" and "&gt;"

It's the execution and throw my exception and other... I am not able to solve...

This is because there is no problem.

Check your error message


SQL Error: ORA-20101: inserting the regid value not allowed.. it will take auto number
ORA-06512: at "SCOTT.TRI_UNQID";, line 11
ORA-04088: error during execution of trigger 'SCOTT.TRI_UNQID'

Read from the bottom up. Oracle means

1. a SCOTT trigger. TRI_UNQID caused an error
2. the error occurred on line number 11
3. the error message is ' insertion of the value to enter the not allowed... " It will take auto number.

Why oracle has to say what trigger or procedure caused the error? Because there might be several trigger or procedure that may generate the same error if a user just need to know what is causing the error. And a line number is always helpful for debugging.

So everything is good here. There is no problem to solve.

and another point is if it is inserted successfully with errors, then it's values are inserted into the table at the front not the end of the records... How is it going...

In a HEAP organized table this is SO forward or back (order of the lines is not relevant). If you want to display the records in an orderly manner use the ORDER BY Clause in the SELECT statement.

So all is good here as well.

I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

I am running Windows 7 and noticed that Windows updates did not work. The parameters are defined for the update every day. When I went to update manually returned an error WindowsUpdate_80070017. MSFT site was no help. Any recommendations?

Since neither updates Jan - 10 have installed, I'm going to hand you Support MS in the hope that they can resolve the problem. See below.

That being said, is an interpretation of the 80070017 - cyclic redundancy check error "a device attached to the system does not work," which suggests that a hardware problem might be the cause of the error (although I must say that it is a very low possibility in this case).

Good luck!

=======================

Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.

~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

I'm trying to backup to an external drive my contact Outlook .pst files. I get an error code 80070021 Ox who says that the files are either locked by another program

original title: error 0 x 80070021

I'm trying to backup to an external drive my contact Outlook .pst files. I get an error code

Beef 80070021 which says that the files are either locked by another program. I just put all these contacts on iPhone. What should I do to fix this?

This problem is caused by a MS Outlook Add In which prevents closing Outlook. Add in that is usually responsible for cauysing this problem is one that search/indexing of the tool. The remedy is very simple:

(i) with Outlook open, go to Tools Menu

(ii) click on "Trust Center".

(iii) in the left pane, choose Add-Inns, and then near the lower part of the window, you will see a button that allows you to manage your COM Add-Ins.

"(iv) to ensure that the drop-down list is set to ' COM Add-Ins" and then click on OK

(v) select Windows 'Search Email an indexer' and then click 'remove '.

(vi) click OK, and then close Outlook.

(vii) re - open Outlook and run the backup. (The program will tell you that Outlook must close the first before saving). Everything should be OK.

If any problem contact me at * address email is removed from the privacy *.

I hope this helps.

I need to connect 3 computers to one computer, but I get the error message: "no more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept."

I just bought a copy of a license 3 reviews for QuickBooks Pro 2010. I can connect 2 computers on the home network very well. But when I try to connect computer (network) a 3rd to my machine to share the file, I get the error message. "No more connections are possible at this remote computer at this time because there are already as many connections as the computer can accept." How can I connect my 3rd computer?

I read the article in the following link, to change the value of the EnableConnectionRateLimiting, but I do not see this key.
http://support.Microsoft.com/default.aspx/KB/969710

I currently have Windows Vista Home Premium SP2, 64-bit edition.

Hello

Thanks for the response back.

The command explained in article http://support.microsoft.com/kb/314882 if applies also for Vista, we have been able to run the command.

Some possible causes for failure Remote Desktop connection are:
a. authentication level is low/disabled.
(b) the port of remote desktop can be blocked by a firewall.
c. remote connections might not be enabled on the remote computer.
d. the remote computer may be asleep or hibernating.
e. e user account doesn't have a password.
f. the remote computer may be too busy to accept more connections.

To resolve all of the above causes, follow the steps listed under "I can't connect to the remote computer:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Remote-Desktop-problems

I hope this helps.

Kind regards
Syed V
Answers from Microsoft supports the engineer.

Library meets live TV with the error: "there are currently no TV signal detected for this channel. The channel may be temporarily off the air. »

I recently changed my TV card to an analogue of Hauppauge PVR150 at a Hauppauge DVB - S Nova S more. Media Center has worked well before.

Media Library will recognize the new card, search and branch on 239 satellite channels, but may not display the channels giving the error message "there is currently no TV signal detected for this channel. The channel may be temporarily off the air. »

I have installed WinTV 7 and that you can view all the channels very well in this program so obviously the map and the intensity of the signal are not the problem.

In my quest through other forums, I heard problems re codec: mpeg2 and we tried several packs of codecs (including shark007) but with no improvement.

My last move was to uninstall Media Center, uninstall all codec packs, uninstall the TV card and drivers, then reinstall the media library and the TV card and am still unable to view TV channels.

Suggestions have greatly accepted.

I've searched the Internet high and low for a solution to this problem and can lead to nothing more than what is proposed here by Divya.

The problem seems to be fairly common and seems to be associated with codec. Most of the solutions I've come across related to the installation of media center alternatives and after several tries I finally opted for new version of Media Portal 1.1.0 beta

Installed without a hitch and so far the interface is similar to the media library but has better customization and the ability to incorporate plug-ins.

I did try the latest version (1.0.2) of the media portal, but said she had a few problems of stability (probably related to the W7 compatibility).

Very happy now with Media Portal 1.1.0 Beta so will not need any other solution to this problem.

The AEC to Flash 10.3 is available only for low-COST airlines?

Hello
I wanted to know if Flash 10.3 AEC function is only available with ACC?
The AEC swc file I see everywhere is one ACC. Are there the playerglobal.swc specific non - ACC or can we use the swc even where we develop a custom application and not by low-COST airlines?
Any help is very appreciated.
Thank you.

LiveCycle is a Java server that you can integrate Flex. The same playerglobal.swc is used in Flex and Flash. Download the latest (FP11) http://www.adobe.com/support/flashplayer/downloads.html

--

Kenneth Kawamoto

http://www.materiaprima.co.UK/

Registration of the companies low-cost (RTMFP vs protocols RTMP/S)

Hey everybody,
I read through all http://learn.Adobe.com/wiki/display/LCCs/LiveCycle+collaboration+service and read through the forums (even in the FMS side that may be relevant http://forums.adobe.com/message/3345179#3345179 and http://forums.adobe.com/thread/736733 ). As recording LCC is in beta is missing the right docs for now.
Could you guys validate/invalidate my hypothesis on the registration of low-COST airlines:
Note: we require Flash 10.0 and connect LCCS SWC (flash 10.0) currently
(1) setting < rtc:AdobeHSAuthenticator id = "auth" username = password "{ourUserName}" = "{ourPassword}" protocol = "RTMFP" / > will do the following:
(a) causes a P2P multicast (which in turn uses UDP and no communication at the service of SUPPLY) between customer sovereign Fund, which means no is / V record steam.
(2) setting < rtc:AdobeHSAuthenticator id = "auth" username = password "{ourUserName}" = "{ourPassword}" protocol = "RTMPS" / > will do the following:
(a) cause a TCP via server companies low-cost that will record the A / V broadcasts very well.
3) what I'd do if we wanted to take advantage of P2P multicasting during the recording of the session of the ACC? To do something like: http://forums.adobe.com/message/3345179#3345179 ?
4) according to this: http://learn.adobe.com/wiki/display/lccs/09+Peer-to-Peer+Data+Messaging+and+AV+Multicastin g that we could make the P2P with Flash 10.1 multicast
(a) maybe I am completely wrong in #1 and #2, and by requiring Flash10.1 for our application, I get the recording work using the RTMFP Protocol?
Thank you
Alex G.

Hi Alex,

OK - now, when you make P2P RTMFP streaming,

recording does not work. To work around this problem, we recommended

either disable RTMFP either by setting StreamManager.maxP2PStreamPublish to 0. In

the latter case, you would still use RTMFP and UDP and so get most of the

benefits.

Answer each of your questions:

(1) partially correct - RTMFP is required for P2P streaming, but not all

RTMFP streaming is P2P. For example, once there are more than 3 beneficiaries.

We automatically hub-and-spoke, because P2P becomes difficult for

the publication server. You can control this threshold using the

StreamManager.maxP2PStreamPublish.

(2) correct. This is a temporary workaround solution - I prefer the 2nd

workaround solution, using StreamManager.maxP2PStreamPublish = 0, which still allows

the benefits of RTMFP without using P2P. In the next version, even if you are

you use RTMFP, once you turn on the recording, he will argue as well

all broadcast on hub-and-spoke (without change of RTMFP).

(3) for the moment, there is no way to do P2P streaming with record

permit. In the future (probably much later), we might have time to allow

This, but it is quite difficult (perhaps not even possible) and it is not high

as a priority.

(4) it is important to separate these issues - requires no P2P RTMFP

streaming. In fact, most of the benefits of RTMFP (mainly the fact that)

It is based on UDP) works on the star network. What we have seen is that Multicast

P2P (activated in 10.1 and rather than direct P2P) is often not a great

choice for conversations, because multicast introduces a latency more than

simply using hub-and-spoke.

hope this helps,

Nigel

How to ensure that no data is ever stored on the servers of the low COST airlines?

In particular, I would like to use the SimpleChat and SharedWhiteboard in a secure application and will not have any data stored on the servers of LCCs (only used to manage the flow of data). At least, I don't want to have data stored between sessions, but the 'sessionDependent' of these two pods property doesn't seem to work (ie. when the value 'true' history of cats and forms of Whiteboard are preserved between sessions).
I put in a few hooks to clear both at the end of the session and the start of a session, but what I really want, is to ensure that the data never be stored in the first place.
Is this possible with these pods, or do I need Custom develop something on my own to support this behavior?
Thank you

The data are stored only in memory. When "persistent" we check the configuration node and transitional so we don't save this node on the disk.

If you're really worried about a security breach, you should probably encrypt your messages before you send them through companies low-cost (it should be easy to subclass the current models and encrypt/decrypt points on the fly).

Yahoo mail problem. Error Msg says low resolution and looped past. Resolution is set correctly and it is application of onlyyahoo that gives the problem.

Loading the homepage of yahoo okay. The mail page works in chrome, but not in firefox. I checked the settings. Yahoo seems to define its own display options. Once the loading of the page mail it alternates between the error message and the Inbox in a loop.

Everything is ok on chrome. It loads with the disolay fitting the screen unlike in firefox where the pages are wider than the screen. T

You are welcome.

Firefox is not automatically zoom in.

You can have zoomed a page on this area by accident in the past by pressing the Ctrl key and scrolling with the wheel of the mouse or Ctrl and more (Ctrl + +) (Firefox remember zoom of page by area).

the errors are at low cost

Similar Questions

Maybe you are looking for