The event gateway asynchronous not multithreaded?

Similar Questions

• Event gateways are not displayed

  I am interested in working with the Garteways event in the ColdFusion administrator. However, in looking over the administrator at my workplace, I see that the event gateways are not among the different settings available for customization. What should I do to get it to appear on the Administrator page? Note that reinstalling CF on the server is not an option for me, so I hope for a workaround. Thank you!

  What is your version of Coldfusion? Gateways of the event started with MX7.

  What is your edition or license? The Standard edition does not support the event gateways.

  In any case, here is a workaround, assuming that your version supports gateways. Login to the administrator.

  The bridge events section has three pages, namely: entry door Types and Instances of the gateway settings. Their paths to the administrator are:

  Parameters: /eventgateway/index.cfm
  Types of gateway: /eventgateway/gatewaytypes.cfm
  Instances of the gateway: /eventgateway/gateways.cfm

  Say, you are now in the default Coldfusion Administrator page. To get the bridge settings page, replace the index.cfm eventgateway/index.cfm in the field of the browser.

  To best illustrate, my pages are

  CF Admin: http://127.0.0.1:8500/CFIDE/administrator/index.cfm

  Parameters: http://127.0.0.1:8500/CFIDE/administrator/eventgateway/index.cfm
  Types of gateway: http://127.0.0.1:8500/CFIDE/administrator/eventgateway/gatewaytypes.cfm
  Instances of bridge: http://127.0.0.1:8500/CFIDE/administrator/eventgateway/gateways.cfm

• Record event blocks LabVIEW if the event Type is not selected.

  Hi I think that found a possible bug in LV2011 SP1.

  -Thread a property node of event Reg on the dynamic event record Terminal of a structure of event

  -Add a case to the event

  -Click on the dynamic event

  -LV accidents

  The source code included, try adding the unspecified event and look like LV breaks down.

  BR,

  / Roger

  Hi Roger,

  I doubt it. If you first select the event in the node property and then add the event to the event, you do not get an accident (I don't have at least let me know if you do). However, if boring and annoying is when it happens, there is a simple solution to the problem, which probably means that it will not be fixed on the previous version.

  Johan BR

• DAQmx error: DAQmx Every N samples transferred the event buffer is not d support channel types

  Hello

  Trying to get my new ni9263 below is the steps:

  DAQmxErrChk (DAQmxCreateTask("",&taskHandle));
  DAQmxErrChk (DAQmxCreateAOVoltageChan(taskHandle,"Dev1/ao0","",-10,10,DAQmx_Val_Volts,)); NOR-USB 9263
  DAQmxErrChk (DAQmxCfgSampClkTiming (taskHandle,"" SAMPLE_RATE, DAQmx_Val_Rising, DAQmx_Val_ContSamps, SAMPLE_SIZE));

  DAQmxErrChk (DAQmxCfgOutputBuffer (taskHandle, OUTPUT_BUFFER_SIZE));

  DAQmxErrChk (DAQmxRegisterDoneEvent(taskHandle,0,DoneCallback,));

  DAQmxErrChk (DAQmxRegisterEveryNSamplesEvent (taskHandle, DAQmx_Val_Transferred_From_Buffer, EVERY_N_SAMPLES, 0, EveryNSamplesCallbackAO, NULL));
  DAQmxSetWriteRegenMode (taskHandle, DAQmx_Val_DoNotAllowRegen);

  Then I do my writing code and start the task

  When I move my code in my application hangs when it comes to DAQmxRegisterEveryNSamplesEvent with the following error

  DAQmx error: DAQmx Every N samples transferred the event buffer is not d support channel types

  Status code :-200980

  Any idea?

  Greetings;

  When you're talking about an alternative, do you mean a sleeve of spare or chassis or an alternative in the code?

  If it's a matter of code, then you probably need to change your software architecture to adapt the capacity of the installation. In order to avoid to use the FIFO and so have the problem you are experiencing, you avoid needing to register for this event? A few examples on different architectures is on the following link:

  http://www.NI.com/white-paper/6999/en

  Kind regards

  Simon Perez

• My internet rpet 'unidentified network' + "the default gateway is not available"...

  My internet was working fine before, but now repeat me 'unidentified network' and I know that's not my internet because I have another laptop that uses the internet itself very well. Then when I try to solve problems, he said "the default gateway is not available"... of the suggestions?

  Hello

  ·         Did you do last changes made on your computer before the show?

  ·         Using internet connection wired or wireless?

  Method 1:

  Follow the steps in troubleshooting from the link and check if that helps.

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

  Method 2:

  Temporarily disable the firewall on your computer and check if it makes a difference.

  Reference:
  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Firewall-on-or-off

  Note: Makes sure to turn Windows Firewall back, once you have done the troubleshooting.

  Method 3:

  Reset WINSOCK, TCP/IP IPv4 and IPv6 TCP/IP stack.
  a. Click Start and in the search box, type cmd.
  b. right click on command prompt, select "Run as Administrator" to open a command prompt.
  c. at the command prompt, type the following commands:
  netsh winsock reset catalog which resets the WINSOCK entries to the default installation.
  netsh int ipv4 reset reset.log that resets the stack TCP/IP IPv4 default installation.
  netsh int ipv6 reset reset.log resets the default install IPv6 TCP/IP stack.
  d. restart the computer.

  Also, see this KB article:

  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357

  Kind regards

• Losing Internet connection because of the default gateway is not available.

  I keep losing internet connection and when I run the troubleshooter, it comes up saying "the default gateway is not available". I have an HP with Intel dv6985se. I was advised to do the following:
  I had the same problems of chance which I fixed it by simple disabling 'SLEEP ON DISCONNECT' SideScalng disconnect

  1 Access Device Manager (Control Panel > system and security > system > Device Manager)
  2. expand the network adapters
  3. Select the adapter that you are using (if more than 1 Repeat step 4 to 8 for each adapter)
  4. right click and select Properties
  5 click Advanced
  6. If you have installed Nvidia Ethernet configuration click the button
  7. scroll to the bottom of the list and disable the device sleep on disconnection and receive Side Scaling
  8. save the settings

  I appreciate this help info but none of this applies to my computer has. In my device under 'Network adapters' Manager, I do not have Nvidia, Asus and AMD, which is listed under my network cards is "Intel Wireless WiFi Link 4965AGN" and "Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.20)".

  The help that I've provided says disabling "Sleep on Disconnect" and "Receive Side Scaling"... or those who are in one of my "adapter properties tab advanced options" for both my Intel and Realtek... no where does say anything about sleep on disconnect or side scaling.

  I was online with HP cat many times and Ive tried the options they have provided that is basically what I've found here but nothing has worked so far! My computer is 1 1/2 old and is preinstalled with Vista 64-bit. Recently, I have completely restored my computer with Windows 7 64 bit, and ever since then, I can't download anything or talk to HP or any kind of help because I lose the connection. Could someone please help me solve this problem... to be frank and honest he pisses me off beyond words that I never had this problem when I'm on Vista!

  I don't know what else I can provide to better help me to solve this problem, but if anyone would like more information on what programs etc, my computer has let me know and I will provide the information. Below, I'm pasting the info I received through my history of troubleshooting like a Notepad of paper Network Diagnostic and Route.Print document.

  Windows IP configuration

  Name of the host...: Helvis-PC
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  ... DNS suffix search list: Belkin

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : Belkin
  ... Description: Intel (r) Wireless WiFi Link 4965AGN
  Physical address.... : 00-1F-3B-A2-B7-6B
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::58d1:7968:4f2e:e873% 12 (Preferred)
  IPv4 address: 192.168.2.3 (Preferred)
  ... Subnet mask: 255.255.255.0.
  Lease obtained...: Wednesday, 10 March 2010 19:03:56
  End of the lease...: Sunday, April 17, 2146 01:58:36
  ... Default gateway. : 192.168.2.1.
  DHCP server...: 192.168.2.1.
  DHCPv6 IOOKING...: 218111803
  DHCPv6 DUID customer...: 00-01-00-01-13-1C-37-DE-00-1E-68-7F-D5-C3
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: enabled

  Ethernet connection to the Local network card:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  Description...: Realtek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.20)
  Physical address.... : 00-1E-68-7F-D5-C3
  DHCP active...: Yes
  Autoconfiguration enabled...: Yes

  Tunnel adapter isatap. Belkin:

  The connection-specific DNS suffix. : Belkin
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Address IPv6 local link...: fe80::5efe:192.168.2.3%14(Preferred)
  ... Default gateway. :
  DNS servers...: 192.168.2.1.
  NetBIOS over TCP/IP...: disabled

  Tunnel adapter isatap. {BC831AD2-8EB9-45C9-9FB7-D2CF0E447380}:

  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Card tunnel Teredo Tunneling Pseudo-Interface:

  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2001:0:4137:9e76:451:18e9:3f57:fdfc (Preferred)
  Address IPv6 local link...: fe80::451:18e9:3f57:fdfc % 13 (Preferred)
  ... Default gateway. : ::
  NetBIOS over TCP/IP...: disabled

  Print route Notepad document:

  ===========================================================================
  List of the interface
  12.. 00 1f a2 b7 6B 3B... Intel (r) Wireless WiFi Link 4965AGN
  11... 1e 00 7f 68 c3 d5... RealTek RTL8101E Family PCI - E Fast Ethernet NIC (NDIS 6.20)
  1... software Loopback Interface 1
  14.. 00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter
  15 00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2
  13 00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface
  ===========================================================================

  IPv4 routing table
  ===========================================================================
  Active routes:
  Network Destination gateway metric Interface subnet mask
  0.0.0.0 0.0.0.0 192.168.2.1 192.168.2.3 25
  127.0.0.0 255.0.0.0 127.0.0.1 on route 306
  127.0.0.1 255.255.255.255 127.0.0.1 on route 306
  127.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  192.168.2.0 255.255.255.0 on binding 192.168.2.3 281
  192.168.2.3 255.255.255.255 on binding 192.168.2.3 281
  192.168.2.255 255.255.255.255 on binding 192.168.2.3 281
  224.0.0.0 240.0.0.0 on-link 127.0.0.1 306
  224.0.0.0 240.0.0.0 on binding 192.168.2.3 281
  255.255.255.255 255.255.255.255 on-link 127.0.0.1 306
  255.255.255.255 255.255.255.255 on binding 192.168.2.3 281
  ===========================================================================
  Persistent routes:
  None

  IPv6 routing table
  ===========================================================================
  Active routes:
  If metric network Destination Gateway
  13 58: / 0 sur-lien
  1 306: 1/128 liaison
  13 58 2001: / 32 on a link
  2001:0:4137:9e76:451:18e9:3f57:fdfc 13 306 / 128
  Over a link
  12 281 fe80: / 64 On-link
  13 306 fe80: / 64 On-link
  FE80::5EFE:192.168.2.3/128 14 281
  Over a link
  FE80::451:18e9:3f57:fdfc 13 306 / 128
  Over a link
  FE80::58d1:7968:4f2e:e873 12 281 / 128
  Over a link
  1 306 ff00: / 8 On-link
  13 306 ff00: / 8 On-link
  12 281 ff00: / 8 On-link
  ===========================================================================
  Persistent routes:
  None

  Helvis,

  If the error does not recur in safe mode then there is probably a startup item or service causes the error. Follow the steps on the following link to locate the item or service responsible for the error:

  http://support.Microsoft.com/kb/929135

  Hope that helps!

  Cody C
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• AnyConnect 3.1 - the certificate on the secure gateway is not valid

  Hi guys,.

  I have a problem with the Anyconnect 3.1.01065.

  When I try to connect I get the "the certificate on the secure gateway is not valid. A VPN connection can be established.

  The certificate is a signed cert self.

  Woks AnyConnect 2.5 without problems.

  Image of the ASA: 8.4 (2).

  [27.11.2012 15:58:27] Ready to connect.

  [27.11.2012 16:01:49] Contact IP_WAN.

  [27.11.2012 16:01:52] Please enter your username and password.

  [27.11.2012 16:02:01] User credentials entered.

  [27.11.2012 16:02:02] Establish the VPN session...

  [27.11.2012 16:02:03] Checking for updates to profile...

  [27.11.2012 16:02:03] Checking for updates...

  [27.11.2012 16:02:03] Checking for updates of customization...

  [27.11.2012 16:02:03] Execution of required updates...

  [27.11.2012 16:02:08] Establish the VPN session...

  [27.11.2012 16:02:08] Setting up VPN - initiate the connection...

  [27.11.2012 16:02:09] Disconnection in progress, please wait...

  [27.11.2012 16:02:13] Connection attempt failed.

  Anyone had this problem before?

  Thank you very much.

  Hello Cristian,

  Please see this:

  CSCua89091 Details of bug

  the local certification authority must support the EKU and other necessary attributes

  Symptom: The local CA on the ASA server currently does not support attributes like the EKU. This enhancement request is to add support for this. Workaround: Configure the cert on the customer's profile

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCua89091

  And the following:

  DOC: Anyconnect supports Extended Key use specific attributes in CERT

  Symptom: When using certificates with the anyconnect client if the certificate is installed on the SAA does not have the EKU attribute set to "Server authentication", then the anyconnect client will reject the ASA certificate as invalid. The certificate of the client id must also be '-l' client authentication "otherwise the ASA he will reject... Conditionsof : Use a certificate of id on the ASA with one other than «authentication server» EKU Use a certificate of id on the client that has one another EKU that '-l' client authentication. Workaround solution: Generate a new certificate of ID with correct extended key usage

  http://Tools.Cisco.com/support/BugToolKit/search/getBugDetails.do?method=fetchBugDetails&bugId= CSCty61472

  If at this point, you need to set up the corresponding certificate or use an earlier version of the AnyConnect client.

  HTH.

  Please note all useful posts

• WiFi access limited, error: "the default gateway is not available.

  I just bought a laptop Windows 8 last December. It had been repaired twice (change the motherboard). He works all fine until last week, wifi connectivity started showing limited access. Furthermore, my IPV6 shows no access. I tried many solutions to many websites, but all will not work. Is there another way? When I trobleshoot the problem, it will show wifi Internet but when I run Google Chrome, it displays an error of internet connection. After I trobleshoot, the stated problem is "the default gateway is not available. In addition, he recovers in about 5 minutes after trobleshooting access. I need a solution as soon as possible. URGENT!  In addition, may I know what caused this do? I hope some of you can help. :(

  Dell Inspiron 7420, unique language of Windows 8

  Hi Amos,.

  I understand that your WiFi connection fails.
  According to the guidelines of the error (the default gateway is not available), there is a problem with the gateway IP address that does not connect to the internet.

  I would be grateful if you could answer the following questions:

  1. did you of recent changes made to your computer (installation of updates, device drivers)?

  2. which antivirus app do you use?

  What are the troubleshooting steps you have tried?

  Here are a few troubleshooting steps that you can try to solve this problem.

   

  Method 1: Manually assign the IP address and the default gateway and check if it works very well. Before you assign manually the IP address and the gateway by default, do
  a note of the IP address of the computer. To do this open command prompt, type ipconfig and press to enter. This displays the IP address, make a note of it.

  To manually assign the IP address and default gateway, follow these steps:
  a. in the system, right click on network icon tray. Choose the open network and sharing.

  b. click on change adapter settings

  c. right-click on the card's wireless connection and click on properties.

  d. Double click on Internet Version 4 (TCP/IPv4) Protocol and assign the IP address manually.
  Example: Old Ip address is 192.168.0.1
  Replace the IP 192.168.0.50
  e. leave the subnet mask and default gateway are the same.
  Subnet mask = 255.255.255.0
  Gateway by default, would usually 192.168.0.1 or 192.168.1.1
  f. click apply then click Ok and restart the computer and check if it helps to solve the problem.

  If the method above does not work, proceed to the next method.

  Method 2: I suggest you try the steps from the link given below:
  Wireless and wired network problems

  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-8&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  
  

  If you have additional problems, please reply to this post and we will be happy to help you further.

• CGI and the event gateway

  Hi all

  I have create an eventgateway and call the gateway instance using the function "SendGatewayMessage.  The gateway instance works correctly.

  But I write the CGI in pdf format

  The CGI. Server_name is NONE, REMOTE_ADDR is the empty string

  How can I get the servername and REMOTE_ADDR

  Help, please

  You will need to pass this information in the event handler function.

  The CGI variables are built by the web server and the application server.

  Invoking an event gateway with SendGatewayMessage does not pass through the web server so no CGI variables.

• Reach target FIFO in the event structure will not achieve

  Hello

  I'm just counting the time in ticks between edges mounted on two digital channels. Therefore, I use a myRIO and LabVIEW 2013 SP1 on a Windows 7 PC.

  As you can see in the attached photo, I use a FIFO extended target to switch the number of ticks between two SCTLs events to a while loop, where I want to send them via DMA to host of the RT.

  I chose this model to limit the number of DMA channel and increase the SCTLs clock (allows greater accuracy in time). The number of ticks is determined using the DSP 32 bit - built-in counter.

  However, when I run the VI no data is written to the target FIFOs scope. 'Number of elements to write' is still 127 (128 requestet), 'Number of items to read' is always zero. "ch0 post" indicates that the "real" State of the structure of the case is actually entered.

  Edit: all indicators have been added for debugging purposes. Simulation on PC indicates no error either, but I realized that no data is written to the host of RT during actual use.

  I checked the cRIO programmers guide and the high Performace FPGA Developer's Guide and do not see where I was wrong. However, it will not work.

  I would be happy if someone could help me solve this problem!

  In the lower part while loop what do you do if one of the read FIFO has expired (zero cases in the structure of the case)?

  If you set the Boolean value False in any other case (1.3) then you'll only send something to the host when the two data FIFOs received in the same loop iteration.

  If she receives a number of cycles on a FIFO in an iteration, and a number of cycles on the other FIFO in the next iteration has expired will never be null.

  To debug you may store the value 'tick count ch0 fifo' in a shift register and update only when the delta_c_ch0 FIFO does not time-out. Then you can see if this value is always nonzero.

• Button value change records in the structure of the event, but does not change appeaance?

  Hello world

  A quick question... I hope someone can answer...

  I have a code that uses a PS button within a structure of event to trigger a signal of AO... My code is below. The code works fine and the OD goes off when you press the button E-Stim... But when pushed the button does not change with reliability the appearance (i.e. of the gray 'off' red 'on' color)... Sometimes color changes; no other time not... If I remove the structure of the event and the survey button in the appearance changes as expected.

  What is going on? I would like the button to change the colors on the user interface to indicate that it works... Should I programmatically control the color?

  Kind regards

  Jack

  

  I guess that when query you the button you have some delay in your loop? Locking means that the button will change its value when you press it, then switch back to the original value once the value of the control has been used by the code. When you ask, this means that until he reaches the next iteration of the loop, but in the case where the structure that will happen immediately.

  The default setting for the buttons to modify its behavior as in most of the application would be latch releasing. You then raise the event when the button of the mouse over the control. This also allows "drag" control if you push down on the subject, given that you do not release control in this case.

• structure of the event recorded does not change value

  I have a VI that communicates with an FPGA via a telnet interface.  I have several Boolean controls on the front panel.  When you click a control, it sends a write command on the face i in telnet to the FPGA.  Similarly, if a process in the FPGA himself wrote the same registry (that control written when I clicked on it), an order is generated in the FPGA and returned to the VI and the control (via a local variable) lights or unlights accordingly (based on value).  In other words, these controls are read-write...

  It's all workers, except for one important thing.  I have the code that runs through a structure of event whenever the value of the control changes.  I can see that this code executes in fact when I click on the control via the front panel.  HOWEVER - when something is generated in the FPGA finally changes the value of the control, the structure of the event does not, even if I see the value of the change of control on my front.

  A specific example, I have a control named CLIENT_LB.  When I click on CLIENT_LB, I see it lights up, and I see the event structure code run.  Now, if I have the FPGA process to set CLIENT_LB to 0, I see unlight on my front, but does not run the code structure of the event.  I have probes in place who have checked the associated local variable CLIENT_LB evolving impact of values.  The structure of the event reads: 'CLIENT_LB': value change.

  Shouldn't an event structure "value change" run when the value changes, regardless of whether if it happened manually (i.e. me by clicking on the control) or automatically (i.e. the FPGA written in VI and changes the value of the control)?

  The VI is great, and you would not be able to test it in any case unrelated to the material, to remedy that I've attached 2 screenshots, I have described below.

  1. This is where the string from the FPGA analysis occurs.  The chain between the sub - VI, and then the data chain part is hidden to determine if the Boolean value of the control is true or false.  I put a probe on CLIENT_LB, and I see that as the FPGA changes the value of the register, CLIENT_LB passes from false to true as a result.  I checked this several times.

  2. it is the structure of the event.  This code runs when I click on CLIENT_LB on my face, but does not run when the peak CLIENT_LB #1 local variable is changed.

  Writing to variables never fires events to "change the value. If writing should raise this event, use the property "Value (follow the signs).

  Norbert

• Structure of the event - controlled motor not variable

  I have a state machine that includes certain structures of the event. These event structures are used to control stepper motors using an Arduino Mega microcontroller. I'm using labview in 2012.

  The entrance to one of the events is the variable "pour the entry. I want to use it to control the motor speed and direction.

  If I control the motor as shown in the attached image Working.jpg, then the motor functions correctly. If I fix the motor to the steps variable # then the engine moves at the speed set in the right direction depending on whether the entry "pour" is positive or negative.

  However, I want to control the speed of the engine, not the number of steps, with the variable "pay Input". I checked that the values read by the indicator image INPUT_VALUE works do not are of the same order as the specified values, working, by using the "Set Speed". When I connect the value of the entry to the spindle speed of the motors of the Arduino (not_working.jpg) icon, the engine is running, apparently indefinitely at maximum speed. I don't understand why there is a difference in motor behavior between the value provided by these two methods at the entrance to the speed of the motor. I am confused by the present and don't know where to go from here.

  The structure of the event somehow behaves differently when taking a value from outside the structure to this data inside? or y at - it something to do with the opening of the structure on its first loop?

  I have also attached my vi together, even though she may not be the easiest to follow and requires an arduino Mega to run.

  Carlr wrote:

  I have a state machine that includes certain structures of the event. These event structures are used to control stepper motors using an Arduino Mega microcontroller. I'm using labview in 2012.

  The entrance to one of the events is the variable "pour the entry. I want to use it to control the motor speed and direction.

  If I control the motor as shown in the attached image Working.jpg, then the motor functions correctly. If I fix the motor to the steps variable # then the engine moves at the speed set in the right direction depending on whether the entry "pour" is positive or negative.

  However, I want to control the speed of the engine, not the number of steps, with the variable "pay Input". I checked that the values read by the indicator image INPUT_VALUE works do not are of the same order as the specified values, working, by using the "Set Speed". When I connect the value of the entry to the spindle speed of the motors of the Arduino (not_working.jpg) icon, the engine is running, apparently indefinitely at maximum speed. I don't understand why there is a difference in motor behavior between the value provided by these two methods at the entrance to the speed of the motor. I am confused by the present and don't know where to go from here.

  The structure of the event somehow behaves differently when taking a value from outside the structure to this data inside? or y at - it something to do with the opening of the structure on its first loop?

  I have also attached my vi together, even though she may not be the easiest to follow and requires an arduino Mega to run.

  You have a very inappropriate design of "state machine" - even if you do not have same event in more than one of your structures of the event (in addition to time-out), looks that get some of your treatment to go forward until you get something very specific (and in which none of your other user events are being processed).

  I strongly suggest that first set you design of State machine - perhaps follow producer/consumer Design Pattern (events) rather than having everything in a loop, the way you have.  If you keep everything in a loop, you should consider redesign so that you at least allow events to deal with rather than stay in a loop for an indefinite period!

  In any case, in the case where work, you send variable "Set Speed (steps per second)" for engines step by step write vi.  But otherwise, you're feeding 'Entry for' value - are they the same? And to let you know, you send only command "write" step by step when the input value to be paid.

  It's a big mess!  For starters, look at the attached picture, get rid of your structure of the event that has "for the entry" and replace it with what I showed in the picture. (In fact, all your event structures can / must be replaced with a similar logic.) Does not need the event structure in all this, you're just more complicated it must be!

  -DP

  

• http connection goes through the WAP gateway and not through BIS/BES

  How can I check that an http application connection passes by the WAP gateway and no BIS/BES.

  I do not have the source code of the application and need to build my own app to connect http connection made by the unit.

  I only have the jad file.

  Thank you very much for the help.

  at this point the man, you must understand a few things on your own.  Get the cod, and put the cod in the same folder as the Simulator, they will then work in the sim card.  Or you can browse to a deployment for application with the sim ota and download the cod in this way.

• Recurring "the default gateway is not available.

  At random times throughout the day, I get a "default gateway is not available", and after you run the troubleshooter, it solves the problem, but then later in the day, it happens again. Why/how does this happen?

  Hello

  Thank you for give Forums Community Microsoft the opportunity to help you with your concern for Windows.

  According to the description, it seems that you are having problems with error default gateway is unavailable.

  I need to ask you some questions to help you better.

  1. which browser is installed on the computer?

  2. were there any changes (hardware or software) to the computer before the show?

  We will try these steps and check:

  Method 1: assign the IP address and gateway manually, follow these steps:

  has. in the system tray, right-click right network icon. Choose Open network and sharing Center.

  b. right click on Local area connection and click Properties.

  c. Double click Protocol Internet Version 4 (TCP/IPv4) and assign the IP address manually.
  Example: Old Ip address is 192.168.0.1
  Replace the IP 192.168.0.50

  d. let the subnet mask and default gateway are the same.
  Subnet mask = 255.255.255.0
  Gateway by default, would usually 192.168.0.1 or 192.168.1.1

  e. click apply and Ok and restart the computer and check if it helps to solve the problem.

  Method 2: Perform the steps in the link and check.

  How can I troubleshoot network card?

  http://Windows.Microsoft.com/en-us/Windows7/fix-network-adapter-problems

  Answer to us if you are having problems with the network or any other problem of Windows, and I'd be happy to help you.