The event of deletion of Table child task process passes empty values

Similar Questions

• Whenever I sync my calendar on Lightning, I get a message "accept changes and update in any case" on several occasions, even though the event is deleted from the server

  This repetition of message every time I sync, therefore can freeze the Thunderbird application after 3-4 syncs

  Right-click recycle the message to the next synchronization
  Left button instantly recycle the message

  Event deleted on the server, lightning and by Organizer

  Disable Google provider problem ceases, but which makes unnecessary lightning

  TBird reinstalled, updated all modules

  Tried to download the image, but no luck...

  I deleted the event to my calendar and was the Organizer to do the same thing.

  What Organizer?

  I have the latest updates from each of the three

  Once again, what are your versions of Thunderbird, Lightning and the provider add-on?

  and charging each of them...

  I mean you don't have to reinstall Thunderbird, then it was a waste of time.

  You can try to remove the calendar in lightning, restart Thunderbird, and then recreate the calendar.
  Given that the calendar is a calendar of network no data will be lost.

  That said, it is always recommended to have a recent backup of profile.
  _ http://KB.mozillazine.org/Thunderbird: _FAQs_:_Backing_Up_and_Restoring

• ORA-00054. Is possible to interrupt the cancellation and delete then table?

  Hello.

  I m import a long table with utility IMP.

  When has spent a lot of hours and the process was near complete I ORA-30036 and a restore operation was launched.

  I m trying to drop/truncate the table to avoid the wait, but the cause of the restore process I ORA-00054 and I have to wait for several hours to try to import again.

  My question is: there is a way to interrupt this restore operation and delete the table without inducing an inconsistent state of the database?

  I m working with Oracle 9i on Windows plataform

  concerning

  No, it isn't.

• Detection of change DAQmx - cancel the event error logging

  I am trying to use DAQmx for detection on some digital lines of changes. I think I installed everything in this article, but I always get error 'Error 1 has occurred to unregister events in the detection of change in Test - Error.vi Unregister'. When I change the structure to register for another event, not involving DAQmx but using the same structure, I get this error.

  I need this implementation on a code that runs for a very long time and according to the above article:

  "Use the Unregister function for events and function to destroy the user events to release the associated events and the reference of user event. LabVIEW unregisters all events and destroyed the existing user automatically events when the top-level VI end of execution. However, to conserve memory resources, National Instruments recommends that you unsubscribe and destroy the user events explicitly, especially in an application that is running for a long period of time. »

  Here are some screenshots of my comic, but also the .vi. Note that the detection of real change does not work well, it's just after I click on 'stop' I get the error generated by the "unregister to events.vi.

  

  

  Note When you transfer the .vi, I saw the issues described on this thread and had to change the name of the file...

  crossrulz wrote:

  You must cancel the registration of the event before deleting the task DAQmx.

  Delete the task implicitly cancels registration of events.  If you disable the task, rather than simply cancel, the event is already cancelled and you don't need two nodes.

  Or quite simply, the event is part of the job.  no tasks, no event and LabVIEW cleans the records for the non-existent event.  Other events that are not 'owned' by similar of e/s Sessions must use the unregister (as of the events of user)

• Why the bottons keep event pressed, although the structure of the event has already executed the event

  I have a problem with this VI, the structure of the event running the event when you press the botton but the botton maintains, even if the event has already run, just the stop button works as it should.

  Everyone thinks that I have to use an architecture or it's ok just use the structure of the event?

  This happens because you have control over cluster in one case and manage events of changing values in other cases; the cluster can be read in one case.  Move the control of cluster outside the structure of the event and delete the register shift.

  

• The difference between delete and insert transactions

  Hello

  How can I tell the difference between delete and insert in a process using Apex 5.0

  Best regards

  OraDev wrote:

  In a presentation table when you click the "Delete" button checked the database update triggers trigger I do not know why

  Do you really mean 'database trigger', or are you referring to a process of page APEX? Ensure that the tabular form MRU delete process conditional on the button DELETE and that the MRU update process is conditional on the "SAVE" button.

• The event gateway asynchronous not multithreaded?

  Hello
  I stumbled upon a huge problem, and I would appreciate your help, otherwise I'm looking at a major overhaul of my application: S
  
  I thought that any event gateway (asynchronous) would be multi-threaded? in other words, multiple users can call the event gateway at the same time and it would be just the fire the event gateway threads and parallel processing of the EFA happen?
  
  However, this isn't what happens in my application. My gateway to events is called from a Web page and it calculates (very complicated and time-consuming data) data and creates a file with a unique file name. However, if more then 1 user submits a job at the same time, it takes the first task, it ends and then begins to work on the next task in the queue. So if there are 5 users submitting their jobs one after the other, the event gateway will take their jobs one by one which is very bad for me.
  
  Is it possible to have the event gateway to work on several tasks at the same time? or is it just not possible?
  
  I would greatly appreciate your response. Thank you
  
  using Coldfusion MX 7, WINXP

  Check the ColdFusion Administrator settings page: event gateways-> Settings.

  The number of threads that service configurable events here. The default value is 10 threads for the company, but if you use the Developer edition, then you are locked 1. The CF standard does not support the event gateways.

• Delete an empty value in poplist (bean of choice of message)

  Hi all
  
  I created a Style element bean "OAMessageChoiceBean". I have a simple VO behind one that displays 'Yes', 'no '.
  
  Query is just a selection of Yes, no double with a Union.
  
  In the backend, when I run this query its fine. But there is an empty additional value which is the first in the menu dropdown. I don't want this value that is displayed.
  Instead, I want only 'yes' and «»
  
  No idea how to remove it?
  
  Thank you
  Martine

  In the property inspector there is an option to 'add an empty value. Go to false.

  Concerning
  Sumit

• How can I display table 2D tabular on the Panel before the user can delete any subdashboards

  Hi guys and girls.

  It is my first post here, so go easy on me. I promise you that I used my best GoogleFu I before posting here.

  I am a self taught amateur LabView. I worked on a User Interface for my Robot SAGAR. See some of my work so far (girlfriend used as a draft classes, but we have both worked together on it, which got hooked me in the first place on LV):

  Now, I'm working on the use of LV and Google Earth as a planner of mission right now.

  My question is this. I have a 2D array that stores the Lat/Lon each waypoint. I's like to have posted on my

  front tabular, with WP # (the 1st dimension array index), Lat and Lon on line, like this.

  

  More importantly, have the user can select a point of full path (or just the number of WP would be ok) and remove it using key DELETE or any other button on the Panel.

  I am at a loss on how to do it. Ideas?

  Thanks for the help!

  Heal the little robot.

  You said that you were using a table. I suggest using a multicolumn listbox. In this way, you can change the selection mode to "highlight the whole line. You can use a structure of the event to respond to the user by pressing the delete key. See attached simple example. Note that some keyboard can label the BACKSPACE key as 'delete '. If you want to answer it, you also have to see if the Char value is 8, which is the code for this key.

• Custom event is not captured by the Task Scheduler and unable to trigger by e-mail for the event

  Hello world

  We have installed the 9.0 table in our windows 2008 R2 server and Scheduler tasks to send if you find error occurred for the application in it. That's why we created SMTP inside. First, we have implemented the Task Scheduler and generate an error in the application of the table and run the task manually and we receive by e-mail. But when we go for automation by the custom event. The steps below that I follow:

  1. click the Start button, and then select administrative tools > Task Scheduler.

  2. click on the task of creating in the Actions pane on the right.

  3. in the dialog box create a task in the name text box, type a name for the task and provide a description if you want.

  4. in the section security options, select run whether user is logged in or not.

  5. click on the triggers tab, and then click the new button.

  6 to start the task drop-down list, select an event.

  7. in the settings section, select custom and click the new event filter.

  8. for the event level, select the error box.

  9. selection of the Source, in the event source drop-down list, select the table server checkbox.

  10. click OK to close the new dialog box even filter and then click OK again to close the new trigger dialog box. The event trigger is now configured.

  11. in the dialog box create a new task, click the Actions tab and click the new button.

  12. in the Action new dialog box, in the drop Action, select send e-mail.

  13. under the settings section, fill in the form as required, including the SMTP server.

  Note: It is necessary to enter the valid e-mail addresses in the From and to text boxes.

  14. click OK to close the new dialog Action.

  15. click OK to close the dialog box create a task and finish configuring e-mail alert.

  If please see this and feel free to contact me if you have any information.

  Concerning

  Valerie

  Mob: 469 345 3625

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• How to capture the event of selection of a table on the side line client (JavaScript)

  The example is:
  < af:table >
  < af:column >
  < af:outputText... >
  < af:clientListener... / >
  < /... >
  < /... >
  
  However, the text does not fill to the top of the cell. So, if I click on the on the empty area, the event handler is not called.
  I hope, even if I click on the empty area of the line, the event handler will be called.
  In fact, if I click on a row of a table at any location, including the empty area, the line becomes blue. How to capture this select event row on the client side?

  You can try file the client listener as a child under tag instead of the ?

  
  ...
  
  
  
  

  The above code should call a function in your js file called "handleTableDoubleClick", which, in turn, queued a ClientEvent that can be attached to a Backing Bean method. Something like:

  ...
      public void handleTableDoubleClick(ClientEvent ce) {
         //do something when the table is double clicked.
      }
  ...
  

  hope that helps

• to view the consecutive words in a table on a press of a key. Event listeners does not.

  I need to display a series of words consecutively on a black background. A new Word presented whenever you press the Enter key (it is necessary that it is the same key IE each time the Enter key). The words are arranged in a table. I created a function for each button press and a listener. Also, as the previous word is replaced by the following, I have a removeChild() to get rid of the the last word.

  I have a set removeEventListener in place too, to avoid problems with listeners. To this, I've been long without success. It must be an earpiece problem (IE I do not have the doors correctly listeners?) or a display problem. It always shows only one. Please find below the code for the display of two of the words in the table called cvcwords. The main problem is that the words are not displayed one after the other (actually not at all, except for the first) when you press the Enter key. Very much as a powerpoint presentation, that's the idea anyway. I have just a sample of the code below. any help appreciated.

  var cvcwords: Table = ["bad", "mod", "hud", "mit", "sat", "fog", "puc",];

  this. stage.addEventListener (KeyboardEvent. ) KEY_DOWN, modKeyDown);

  Function modKeyDown (e: KeyboardEvent): void {}

  if (e.keyCode is keyboard. ( ENTER) {

  removeChild (myText);               / / to remove back Word of screen

  myText.text = cvcwords [1];        //to View element un of le table

  addChild (myText);

  } else If (e.keyCode == keyboard. ) SPACE) { //this is distinct from the other for option }

  myText.text = "try again";

  addChild (myText);

  this. stage.removeEventListener (KeyboardEvent. ) KEY_DOWN, modKeyDown);

  }

  }

  this. stage.addEventListener (KeyboardEvent. ) KEY_DOWN, hudKeyDown);

  Function hudKeyDown (e: KeyboardEvent): void {}

  if (e.keyCode is keyboard. ( ENTER) {

  removeChild (myText);  to delete the previous word of the screen

  myText.text = cvcwords [2];

  addChild (myText);

  } else If (e.keyCode == keyboard. ) SPACE) {}

  myText.text = "start";

  addChild (myText);

  this. stage.removeEventListener (KeyboardEvent. ) KEY_DOWN, hudKeyDown);

  }

  }

  
  

  From what I see of your code, the following is everything you need...

  var cvcwords: Array = ["bad", "mod", "hud", "mit", "sit", "fog", "puc",];
  var count: int = 0;

  stage.addEventListener (KeyboardEvent.KEY_DOWN, modKeyDown);

  function modKeyDown(e: KeyboardEvent): void {}
  If (e.keyCode == Keyboard.ENTER) {}
  myText.text = cvcwords [counter];

  counter ++;
  } Else if (e.keyCode == Keyboard.SPACE) {}

  myText.text = "try" again
  addChild (myText);
  stage.removeEventListener (KeyboardEvent.KEY_DOWN, modKeyDown);
  }
  }

  When you test this in Flash, in the drive to be sure, you will need to select the option of Devil keyboard shortcuts located under the control option in the top toolbar

  If you really want to tell them to try again, probably not wanting to remove the event listener

• Some records remain in the Event Table of the ballot for forever and ever

  I configured the Event Table of the vote to Oracle BI. It works very well and the entry cache are purged. But some cases rest in the EPT forever table. The records without misstat1 are inserted by me (trigger). Documents with any OTHER = misstat1 are inserted by BI server. There is no instruction delete or error in the log file for this timestamp. Other timestamps are deleted by the BI server.
  

  +++Administrator:fffe0000:fffe0012:----2008/09/22 22:17:58
  -------------------- Sending query to database named misstat1_db (id: <<127983>>):
  insert into 
       BI_EPT("UPDATETYPE", "UPDATETIME", "DBNAME", "CATALOGNAME", "SCHEMANAME", "TABLENAME", "OTHER") values (1, TIMESTAMP '2008-09-22 22:08:24', '', '', '', 'MV_E_DENIK_KP', 'misstat1')

  UPDATETYPE     UPDATETIME     DBNAME     CATALOGNAME     SCHEMANAME     TABLENAME          OTHER
  
  1     22. 9. 2008 22:08:24                                                                    MV_E_DENIK_KP           misstat1
  1     22. 9. 2008 22:08:24                                                                    MV_E_HIM                           misstat1
  1     22. 9. 2008 22:28:19                                                                    MV_ODY_OSCI_VYROCI     misstat1
  1     22. 9. 2008 22:28:19                                                                    MV_ZPC_CERP           misstat1
  1     22. 9. 2008 22:08:24                                                                    MV_E_DENIK_KP     
  1     22. 9. 2008 22:08:24                                                                    MV_E_HIM     
  1     22. 9. 2008 22:28:19                                                                    MV_ZPC_CERP     
  1     22. 9. 2008 22:28:19                                                                    MV_ODY_OSCI_VYROCI     

  I think that UpdateTime itself must be unique, not a combination UpdateTime + TableName. Maybe you could try doing some more tests and make sure that it is the only problem. If you can confirm that you must modify your scripts to either do not insert records at the same time, or to add another logic that would make unique UpdateTime.

• Delete the pages 5.6.2 table but no content

  How can I delete a Table but keep the content to a single list, I currently have 3 columns in the table? I think used to be able to do in previous versions in Format but it's gone.

  Click on the Table to select > create a Textbox > paste into this

  This works because the Tables can not be placed in the text boxes in the 5 Pages, unlike in Pages ' 09, as well as the content is pasted.

  If you want a more productive workflow, use the Pages ' 09.

  Peter

• How to create a Structure of the event, repeating a task until a push a buttom

  Hello!

  I want to make a program that repeats a task until a push a buttom (indicating to begin another task). I know how to do this with a structure of the case, but I want to know how to deal with the event. Any idea?

  OK, I'm going to help you a bit.

  

  Here's how it works: the upper part (producer loop) will pass the value of the OK button (switch released) to the Message Handling loop (consumer).  When the button is true the consumer runs the code in the case of the real and enqueus another loyal to himself and then wait 1 second.  When the OK button is False, the value false is appeared on the front of the queue and the message handler runs if false, empty the rest of the queue and waits for the next message the event loop.

  The Stop button (by releasing Latch) exits the event and the queue is destroyed causing the Dequeue return an error and leaves the message loop.

  This is obviously an extremely simplified QMH.  To read up more about concepts go to file > Create Project > and click on the "More information" link