The Explorer does not collapse 'Libraries' and 'User' to the closing and reopening of the records.

Similar Questions

• Windows Explorer does not work properly and hold all the time

  I have Windows 7 Professional as a platform. In the end, I find windows Explorer does not correctly and hold all the time. Pls advise on how to solve this problem. Note I am not a computer Savvy and I need a step by step approach.

  Thank you for your time and enjoy your time.

  .

  Hello

  Use the startup clean and other methods to try to determine the cause of and/or
  eliminate problems.

  ---------------------------------------------------------------

  References to Vista also apply to Windows 7.

  What antivirus/antispyware/security products do you have on the machine? Include
  everything you've ALWAYS had on this machine, including those you have uninstalled (they
  remains of leave behind which can cause strange problems).

  ----------------------------------------------------

  Follow these steps:

  Try these to erase corruption and missing/damaged file system repair or replacement.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows
  Vista or Windows 7
  http://support.Microsoft.com/kb/929135

  Use advanced tools to solve performance problems in Windows 7
  http://www.howtogeek.com/HOWTO/6152/use-advanced-tools-to-troubleshoot-performance-problems-in-Windows-7/

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/default.aspx/GP/slow_windows_performance?p=1

  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything-
  then right click on taskbar - task manager - take a look at stored by -
  Process - Services - this is a quick reference (if you have a little box on)
  Lower left - show for all users, then check that).

  How to change, add or remove startup programs in Windows 7
  http://www.SevenForums.com/tutorials/1401-startup-programs-change.html

  Is a quick check to see who are loading method 2 - using MSCONFIG
  then after a list of these here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what files, registry keys, and other objects
  processes have open, which DLLs they have loaded and more. This unique
  powerful utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically
  When your system boots and you connect. Autoruns also shows you the complete list
  locations of registry and files where applications can configure start automatic settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor file system, registry, process, thread and DLL
  activity in real time.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are
  loaded automatically when Windows starts. For each application, what follows
  the information is displayed: Type of startup (registry/Startup folder), Command - Line
  Channel file, the product name, Version, company name, location in the registry or
  file system and more. It allows you to easily disable or remove unwanted programs
  that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe
  not. The window Watcher says it all, every window created by each execution of the statement
  program, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Think about it an absolute must - manually update your drivers.

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded
  on your system. For each driver in the list, additional useful information is
  Poster: load address of the driver, description, version, product name,.
  company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit Maker as replacements and system manufacturer of device which are
  the most recent. Control Panel - write - graphics card - device manager
  the brand and complete model of your video card - double click - tab of the driver-
  Note the version information. Now click on UPdate Driver (this can do nothing
  MS is far behind the certification of drivers) - then do a right click - Uninstall - REBOOT
  This will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard
  If there are 3rd party with their own software and drivers and the other main device drivers
  you have.

  Now, go to the site of the manufacturer of system (Dell, HP, Toshiba as examples) (restore)
  and site (Realtek, Intel, Nvidia, ATI, for example) and get the manufacturer and device
  their latest versions. (Look for the system to update the BIOS, Chipset and software updates
  Site of the manufacturer here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN -.
  REBOOT after each installation.

  Always check in the Device Manager - drivers tab to be sure the version you are
  installation actually appears. This is because that some rollback of drivers before the
  later is installed (particularly that audio drivers) so install a driver - reboot.
  Make sure that it is installed and repeat if necessary.

  Repeat to the manufacturers - BTW to the device makers DO NOT RUN THEIR
  SCANNER - check manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers under Windows 7 (updated drivers manually using
  the above methods is preferable to ensure the latest drivers from the manufacturer of system
  and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  If you update the drivers manually, then it's a good idea to disable driver facilities
  in the updates of Windows, which leaves on Windows updates, but it will not be installed
  pilots who are generally older and cause problems. If updates provides a new
  driver then hide it (right click on it) and then go get new ones manually if
  you want.

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for the)
  Professional, comprehensive and Enterprise edition)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ===========================================

  Refer to these discussions because many more excellent advice however remember to check
  your antivirus, the main drivers and BIOS update programs and also to solve problems
  with the first method cleanboot.

  Problems with the overall speed of the system and performance
  http://support.Microsoft.com/GP/slow_windows_performance/en-us

  Performance and Maintenance Tips
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/19e5d6c3-BF07-49ac-a2fa-6718c988f125

  Explorer Windows stopped working
  http://social.answers.Microsoft.com/forums/en-us/w7performance/thread/6ab02526-5071-4DCC-895F-d90202bad8b3

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Internet Explorer does not work normally and I couldn't connect to the Internet.

  Original title: can I clean my computer and start from scratch

  my laptop is now a mess, that I feel from scratch how to stop files appering.

  You can restore your laptop to factory settings, but you will need to read the user guide to find out how because the procedure differs from a make and model to another.

  Good luck.

• Internet Explorer does not open

  I got an eMachine who was 'slow' that my client wanted cleaned and accelerated. It is Vista Home Basic (without Service Pack yet) and has two users, an administrator and a Standard. Antivirus is Norton. The reason why it has been slow is that she only had installed 512 MB of Ram and a part of which was used by the video. The only spy/advertising software he had was about 250 cases of MyWebSearch which I cleaned. I added just an another 512 MB of ram and has greatly improved the speed. The only problem I have now is that Internet Explorer does not open in a user account. It appears in the Task Manager. If I try to run again, it will show a second instance in Task Manager. He just will not come to the top. The customer has Firefox installed and works well. I called her and she confirmed that IE had not worked. What should I look for?

  Service Pack 2 cured it. I think that SP 2 updated IE 7 to 8. I never could see what was originally in it because it does not open. But it's IE 8 now.

• Internet Explore does not work and will be shut down despite the fact that he is on the screen and I use it. I have windows Vista

  Although Internet Explorer seems to work and is usable, I get an error that says Internet Explorer is not working properly and will be closed.  .  Is not always close because it threatens too but sometimes it is.  Any solution please?  I have Windows Vista.

  Hello
  1 did you change on your computer before this problem?
  2. What is the exact error message?

  Follow the suggestions and then check out.

  Method 1

  You can optimize the settings of Internet Explorer.

  How to optimize Internet Explorer

  http://support.Microsoft.com/kb/936213/no

  Method 2

  You can reset Internet Explorer settings.

  How to reset Internet Explorer settings

  http://support.Microsoft.com/kb/923737

  Note: Please note that reset the settings of Internet Explorer running resets all of the settings defined by the user, including those established by the installed extensions, toolbars and other add-ons for IE by default. This includes all the security, privacy and settings area. Also this will delete browsing history, delete all temporary Internet files, cookies, form data and password especially all stored

• the Explorer does not start at startup (infected by the worm win32 sality). As a solution, I copied explorer.exe dllcache, then it worked. Now, new coming problem

  ICONS OF REAL PROBLEM: NO NO TASKBAR ON THE SCREEN (EXPLORER DOES NOT). I CAN ACCESS THE PROGRAMS THROUGH COMMAND PROMT.

  OS: WINDOWS SERVER 2003

  ANTIVIRUS: NOT INSTALLED

  SOLUTION EXPLORER. EXE INFECTED BY WIN32. SALITY VIRUS. (MADE THE ACQUAINTANCE OF THE CLIENT SYSTEM ANTIVIRUS PROGRAM)

  TRIED: USED DRIVE COPY C:\WINDOWS\SYSTEM32\DLLCACHE\EXPLORER. C: WINDOWS EXE

  PROBLEM SOLVED OF TEMPERORILY AND NEW PROBLEM COMING.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums on TechNet. Please post your question in the Windows Server Forums.

  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Windows Explorer does not respond, the applications do not open, System Restore does not work. Help!

  Hello, my computer is having a lot of problems, which started last night. Here are the things that are run:

  -Windows Explorer does not respond
  -Computer cannot disconnect correctly: down/restarts when I close the computer says "disconnect" for hours.
  -Cannot use the system restore and may not even start from Safe Mode command prompt
  -Safe mode does not load
  -No applications work, apart from web browsers, and AVG.
  -Cannot access the drivers, to make anything back.

  I added not all strange programs and I do not think it is malware, but I can't actually run my anti-malware program. My computer is running really hot, what he has always done and I keep it high and the fan not covered (I'm broke, can't afford a fix of the computer, or the new computer).  Please talk is profane. I'm not all that techno.  THANKS FOR ANY HELP!

  The model is:

  M8622 laptop Gateway
  Vista Home Premium 32 Bit

  So I reinstalled everything, and even though it's a pain, my computer is normal again! Must have been a virus.

  Thank you very much for your help!

• Internet Explorer does not work after you install the kb2761451 update

  Original title: I downloaded the update and now Internet security security update kb2761451 explore does not open.  So I deleted it and Explorer opens.  This update is listed as important.  What should I do?

  The Explorer is 9.

  Hello

  Thanks for posting the question in the Microsoft Community!

  Internet Explorer stops working after the update kb2761451 is installed.

  The problem may occur if the updated components are corrupted.

  I suggest you follow the steps mentioned below:

  Method 1: Of reset Windows Update components

   

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: run the Update of the system analysis tool

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• "Windows Explorer does not ' and restart

  Whenever I open any file with media player, the Explorer files to stop and displays the message "explore does not.

  My system is windows 7 32-bit ultimate.

  Need help solve the problem.

  Thanks in advance.

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  This problem may be due to one of the following problems:

  • You are using an outdated or corrupted video driver

  • System files on your PC can be damaged or do not correspond with other files

  • You may have an infection of viruses or malware on your PC

  • Some applications or services that are running on your computer may be responsible for Windows Explorer to stop working

  I would like to know;

  1. You did changes to the computer before this problem?
  2. You receive an error message/code?

  I suggest to try the procedure described in the following Microsoft Support article and check if it helps.

  Error: Windows Explorer has stopped working

  Note: See "How do I reset the computer to start normally after a boot minimum troubleshooting" to prepare the computer to start as usual after troubleshooting.

  Important note: Do NOT perform the steps to upgrade on site and system restore.

  Also check out the link to improve PC performance:

  Ways to improve the performance of your PC

  Note: The data available on bad sectors may be lost when chkdsk attempts to repair your hard drive

  Hope this information is useful. If the problem still persists, please post back for further assistance, we will be happy to help you.

  ____________________

  Thank you best regards &,.

  Isha Soni

• After you install a second WD 1 TB my book drive, Windows Explorer does not see the new drive.

  Original title: Signature Collision?

  I'm having hard to the installation of a second external drive. I use Windows 7 Ultimate RC. There was a WD 1 TB drive My Book already installed - healthy and works very well. The problem occurred after installing a second WD 1 TB my book reader. I followed all the instructions, pluuging the drive to a USB hub. Windows found the disk, installed drivers and reported the new drive ready for use.

  Windows Explorer does not see the new drive. Devices and printers shows 2 external drives from WD. Disk Management shows as 2 drives, but the second disk is offline because of a 'Signature' Collision

  Each player works very well if it's the only drive plugged in. "Eject My Book" does not work because a program (or more) are to use the player in the background (Windows or Norton).

  I installed the latest firmware and I'm still having this problem. I've been emailing WD with this problem and they are running out of ideas.

  Can anyone help?
  Thank you
  Comatose13

  Hello Comatose13,

  There is an old article of KB in Windows XP that has been recently updated with additional measures to solve this kind of problem. The KB covers Windows XP, Windows Vista and Windows 7 with step by step methods. See if that helps.

  http://support.Microsoft.com/kb/330140

  Bobby

• The Explorer does not recognize my DVD drive

  My system suddenly stopped recognizing my DVD drive. Windows Explorer does not recognize. Device Manager says there are and that the driver is up-to-date. I tried to uninstall and reboot, but that did not help. I use Win 7 Home premium, 64-bit with a terabyte HD and 6 GB of RAM. I also tried to go to a previous restoration and cured the problem for a short time. Any ideas?

  Hello

  Since the system restore worked, for a while, it seems that you have a program that can
  is causing the problem. Having too many programs of CDs and DVDs, in particular those who are responsible
  pieces themselves at startup, can cause this problem, that compete for resources. If you
  can use the system to restore the drive working again, or if using other methods
  below, then EXPORT the registry keys, so you can compare and merge those back
  If necessary.

  -------------------------------------------------------------------------------------------------------

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Then run checkdisk (chkdsk).

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  ==========================================================

  After the foregoing:

  References to Vista also apply to Windows 7.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The DVD player does not work after installing Windows 7
  http://support.Microsoft.com/kb/975270/

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during Windows Vista
  Setup after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and the
  correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry settings for your
  CD/DVD drive someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays
  all devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• The homepage of Internet Explore does not open on my pc.

  Original post: the homepage of Internet Explore does not open on my pc. Please do what shouldi?

  When I open internet explore it displays the message: internet explore cannot display the Web page. If I type however in another web application example for my mail or any site at all, this will be displayed. But once I finished the task and retirement to IE, confronted again im the ugly message. Olease what I do?

  You can set the page Internet Explorer opens with for what you want and it looks like you can have inadvertently set it to a page that does not exist or is no longer valid.  You can navigate to any page you want to be your home page, then use the following instructions for the "Current use" layout: http://windows.microsoft.com/en-US/windows7/Change-your-Internet-Explorer-9-home-page

• The Explorer does not display a pdf thumbnails

  The Explorer does not display a pdf thumbnails

  Hi Ken,

  With several comments from our clients and requests for the same thing, we have implemented return thumbnail preview.

  With the update of October of Acrobat DC published last month, we added back support for PDF thumbnail previews in Windows Explorer for 32-bit systems.

  Please note that by default, it is disabled. To activate the same, please go to Edition-> Preferences-> general and turn ON the thumbnail «Previews Enable PDF» checkbox in Windows Explorer

  In a future update of the software Reader / Acrobat DC, we are looking at the possibility of adding back to back support of PDF thumbnail previews in Windows Explorer for systems 64 bit as well.

  Kind regards

  Rave

• Since Apple ridiculously decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC and click the circle of friends so he could load, MORE I wonder constantly if I want to use my game stored loc

  Since Apple decided to abandon the center of games tab of my friends in the game does not load automatically and I have to go to GC icon and tap the circle of friends so he could load several times, MORE we continue to request if I want to use my game stored locally or my stored GC game. I refuse to install iOS 10, because it means of course I won't be able to manually load the tab my friends and my losing my game completely. How can I fix it? Remove the Center game is the worst thing that Apple could have done, in my humble OPINION.

  You will not lose your game entirely. I have several games of game Center, and they work fine. And I understand the developer of a game that this game center continues to store the backup of your game.

  It's just that now friending is handled via the interface of the game. The only options that you have in iOS10 is to go to the settings panel in / log out of game center or remove all friends. And none of the games I play has updated so I can see how their friending works with iOS10.

  Beyond providing the basic interface, Apple seems to have turned all aspects of the social game on the games themselves.

  If you want to make Apple know how you feel, you can leave your comments via this form

  http://www.Apple.com/feedback/

• How can I disable the 'top sites' history of cleaning does not remove this and confusing and a risk to privacy

  How can I disable the 'top sites' history of cleaning does not remove this and confusing and a risk to privacy.
  It also serves as the sites I want to keep are my favorites
  Is there an alternatively an add-on for this

  Hi Wayne_a,

  If you are concerened about your privacy you can turn off this feature:

  Disable the new tab Page