The external monitor resolution not supported on Satellite Pro U400

Similar Questions

• Need to reset the external monitor resolution in Windows Vista

  Stupidly, I changed the resolution of my new external monitor on my laptop to a not available (single mode external monitor) and received a message on the screen: "out of range" + white screen. No matter how hard I tried, I can't use one external monitor mode and must live with double display (which is a waste of energy on my tiny laptop screen). Could someone tell me please how to reset the resolution setting in Vista for the external monitor?

  Hello

  Welcome to the Microsoft Vista answers Forum!

  You can try the steps below and check if the problem is resolved.

  You can go to the control panel of the screen and reset it to factory settings.

  And if you face the same problems, then, you must contact your system provider who will be in a better position to help you reset the external screen to its default state.

  As a workaround, so check you have function keys on your portable computer, which can go from a monitor to your laptop and external monitor.

  If Yes, then try to return to the screen of the laptop and turn off the external monitor.

  Hope this information is useful.

  Thank you, and in what concerns:

  Suresh Kumar-Microsoft Support.

  Visit our http://social.answers.microsoft.com/Forums/en-US/answersfeedback/threads/ Microsoft answers feedback Forum and let us know what you think.

• Equium A110-252: the display on the external monitor resolution

  When I connect my LCD TV screen to my new satellite A110-252 using the external monitor port does not fit the image of the (too big) TV screen.

  I've tried everything on orders for establishment of TV screen but no joy. Surely, there must be an option to fit to the screen on satellite? Can anyone help?

  Thank you Perry.

  Hi there, you are using the external monitor port or the S-Video? Unfortunately, if you use the S-video port you can hold all of Office on television because it is technically impossible (without deleting the lines).

  TV less than number of rows than a computer monitor: PAL = 576 visible lines, NTSC = 480 visible lines except if you can pass in 640 x 480 mode 800 x 600 is the best that you can use to display an image on the TV.

  Richard S.

• G6 cracked screen and the external monitor will not register. Quick key maybe?

  HP Pavilion Notebook PC Windows 7 #aba a4a93ua g6, my screen cracked when she fell to the ground, I plugged it to my office mmonitor via monitor cable 15-pin. Monitor register if we are in safe mode. Is there a guest key to use? Feature key guest did not work. on this model, the screen button is f4.

  Hello

  You get any display on your external monitor if you press f4 once, then press the right arrow and press enter?

  Kind regards

  DP - K

• Laptop built in display and the external monitor does not

  Hi all, I have a HP Envy M6 - 1158ca, and recently my built-in screen has stopped working. I plugged in an external display via HDMI and it showed no entry. It seems that the laptop is not booting in Windows either, as usually every time my laptop starts windows, letting me know that I can now sign for use in the fingerprint scanner is flashing. I am extremely frustrated by this and have an incredible amount of stress because it was my only PC. Please answer as soon as possible, it would be much appreciated.

  Thanks in advance.

  Yes... I think it's what could have damaged, he... Computer laptop must always be completely turned off with the battery and the adapter AC disconnected during replacement of any equipment internal...

  Shouldn't be a BIOS problem... but again, you can check this link...

  Restore the BIOS

• Vista recovery did not come with satellite Pro U400

  Hello

  Just bought this laptop and it comes with a product for Windows XP Recovery disk but Vista is currently installed on it?

  No doubt I have to do a restore ASR disk for Windows Vista me (either using the Toshiba recovery system or Windows Vista backup function). Is this enough to do a complete restore of the system in case of a serious hardware failure?

  Have never needed to use a disc of restoration (yet!) but I am told that you should always use disc 1 of the installation of Vista discs - which came with the machine?

  A Council does Thank you.

  Neale

  Hello

  Usually, you should be abele to create a twilight of recovery using the Toshiba recovery disc Creator who must be preinstalled on your laptop.
  It s is strongly recommended to create this disc because this drive could be your last chance to save the Vista if something goes wrong with the Vista operating system preinstalled.

  The recovery disk format the whole HARD drive and restore your laptop to factory settings as on the first day of purchase.

  Welcome them

• Compaq presario cq42 screen becomes black when the external monitor is unplugged

  Compaq presario cq42-137tu running windows 7 32 bit.

  I've been using a connected external display on the vga port and now every time I disconnect the monitor and restart the laptop the laptop LCD screen will display the original message of compaq and the black windows boot screen with the logo but then turns off. If I reconnect the extrnal monitor it will work fine (even if the external monitor is turned off)

  The screen of the laptop works fine without the external monitor connected in safe mode.

  I used both the HP support and the setting in the display panel to select single monitor and set the display on the screen of the laptop, but every time that the external monitor is not connected the screen turns off. The external screen does not need to be turned on, just to connect to the laptop monitor work. I also tried to download the graphics driver and put it back.

  If your laptop is a ComPaq base model then there is the (built-in) Intel UMA / GMA 4500 M - GL40 chipset with video memory sharing and you should consider downloading and installing the driver Intel graphics high definition (HD).

• Satellite Pro U400 - sound of the wheel does not work anymore

  The wheel of sound control in my Satellite Pro U400 works not properly since last month.

  Now, I have to use the volume bar in Vista to adjust properly. When I try to lower the volume by turning the wheel, as I did before, he constantly increases the volume after reducing to a few percent. If I flip it is very very slow, sometimes it decreases the volume a little, but other times it increases. Also when I'm in a word processor, turn the wheel to the right input 'c' character ' on the screen.
  There is no problem when I try to increase the volume, it does its job.

  Do you think it is related to hardware or can it be a problem of driver or something. Is there a solution?

  Thank you

  Hello!

  In your case, I would setup a pilot of his most recent. Search on the Toshiba site and check:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  I had this problem on another laptop Toshiba also and after reinstalling with the recovery disk the problem has been resolved. I also tried updating the drivers and so far, but without success.

  Good bye

• Satellite Pro U400-11V - Installation using the floppy from XP downgrade

  Hello

  Yesterday I had to replace my HARD drive once it is simply dead.
  I didn't know it was a big deal that I had lost any data.
  I would just like to re - install Windows XP using the Downgrade XP disk came with the laptop.

  It turns out that: I have about 10 discs Downgrade XP each almost identical looking and everyone, I assume, associated with a particular Toshiba laptop my company bought at some point.
  Now, I have no idea what drive is the one that came with my Toshiba Satellite Pro U400-11V.

  What I did:
  -We selected at random.
  -Installed Win Xp Pro.
  -Tried to activate Windows.
  -It indicates that the product key is bad (and some drivers are missing, so it is obviously not the disc that came with the laptop, but he got me so far).
  -Correct the product key according to the key that is located on a sticker at the bottom on the laptop *.
  * On the sticker, this key is an OEMAct Windows Vista Business key, the OS of the laptop came with.
  -L'activation of Windows will not accept the key to the sticker.

  So I have 2 questions:
  1. is there another method of re - install Windows XP Pro using the * original * Downgrade XP disk that came with?
  2 (leading to #1) is it possible to identify which drive is the one shipped with my laptop? Perhaps by checking some serial numbers on the disc?

  Worst case scenario I'll have to make (at most) 10 Windows installs until one works.
  But I was really hoping some help & advice.

  I can't wait to hear all the answers,
  Thank you!

  Hello

  > I have about 10 discs Downgrade XP each almost identical search and each, I presume, associated with a particular Toshiba laptop my company bought at some point.
  > Now, I have no idea what drive is the one that came with my Toshiba Satellite Pro U400-11V
  Your ad is really funny :D

  I put t know how your Win XP drive looks like. My laptop came with the recovery disk and it was mentioned on the label that it's Toshiba recovery disc.

  In addition he s already enabled so I put t need to activate the operating system by using this key.
  Also, the key at the bottom of the unit belongs to the preinstalled operating system and it will NOT work with the new Win XP or another operating system.

  But back to your Win XP disks
  I recommend that you check the single disc... maybe a disc is already activated

• Are 64-bit OS drivers available for Satellite Pro U400 PSU45E

  I am looking for a Pro U400 PSU45E-00D005EN, which comes with 3 GB of RAM.
  The specs say it can take up to 8 GB, which is something that I would like to upgrade to.

  I run a large number of virtual machines on my machine for purposes of development and support.

  Anyone know if Toshiba allow 64-bit drivers the U400 that I need a 64-bit to support all Windows operating system that is more than 3.2 Gb of RAM.
  If not, is there a repository that anyone uses?

  Thanks in advance!

  Hello

  I think the Vista 64 bit drivers will be available by the Satellite Pro U400.
  Vista OS 64-bit drivers are available for another series of Toshiba and I don t see why the pilots shouldn't t be available satellite Pro U400 too many serious reasons.

  But the satellite Pro U400 seems to be very new series and I think it will take some time until that pilots will be released.

  Welcome them

• Satellite P300 - display resolution incorrect if the external monitor is connected

  I wanted to use a monitor BENQ of WAP 2010 with my Satellite P300 laptop operating system is Windows Vista Home Premium 32-bit.

  When I connect it, the display resolution changes to an unusable.
  I installed the latest ATI drivers that I downloaded from the Toshiba site. Max screen resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.

  Also, I can't set the correct resolution for the LCD display of the laptop more.

  How set up the screen, so that the monitor displays a clone of the LCD screen for laptop and find the correct resolution?

  Hello

  > Max monitor resolution is 1680 x 1050. This resolution no longer exists after the connection of the monitor.
  Please understand that not all possible solutions are supported by a graphics card chip or a graphics card driver.
  If one of the parts mentioned would not support this resolution then you will not be able to choose and use the external monitor!

  In your case, I recommend the manual of your laptop.
  There you can find a list of available external resolutions and supported.

  Welcome them
  Markus

• How to find out the resolution of the external monitor max on Satellite Pro A100-02Y

  I have a Satellite Pro A100-02Y.

  I want to launch an external monitor but don't have any idea how big a monitor will deal graphics drivers. How will I know?

  Thanks for any help.

  Hello

  You should keep one fact in mind that the available screen resolution depends on the graphics card and the graphics card driver.
  If I'm not mistaken, you can find the max somewhere graphics card resolution information in the user manual.

  But note; If the graphics card driver does not support you favorite resolution then you will not be able to use and to choose!

  In the properties of the graphics card, you can find the available screen are supported by GPU driver resolutions.
  Usually these resolutions could be used on the external monitor, but only if the external monitor takes care of everything.

  Best regards

• Satellite Pro U400 - How can I get the native screen resolution for external monitor?

  I have a samsung syncmaster external screen connected to a Satellite Pro U400.

  The resolution of the screen goes up to 1280 etc. but the minimum samsung is 1440 x 920 (ish I forgot).
  How can I get the samsung to display full screen expanded to save my eyes of the realativively small screen internal?

  Hello!

  Have you tried to update the display on your laptop driver? Check the Toshiba site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  In addition, it would be interesting to know if you are running the factory settings or you have installed your own version of Windows?
  And what operating system are you using? Have you installed all Windows updates?

  For external LCD, monitors, you must set the screen refresh rate of 60 Hz.
  And if you want to change the resolution of the screen, you must select the second monitor in the graphics options on Windows.

  Good bye

• Satellite M30X-111 screen does not display anything but the external monitor works

  My laptop just screen does not display anything (like when the computer is turned off), but when I connect the external monitor, then the desktop is displayed on this screen. I tried to recover the laptop using the recovery disk and it worked again, but today, it stopped working again.

  Again, I must plug the external monitor, and after I tried to restart, I continue to pressing F8 but the startup mode is not come, the noise of when you press a button for too long beeps, however, the monitor of the laptop working again.

  How can I solve this problem?

  What do you do? You want to recover the laptop?
  If Yes, you n press any F8 but you will need to boot from the recovery CD by pressing the C key immediately after starting the laptop.

  But this question seems that you have accidentally switched to external display.
  I recommend checking the Fn + F5 option. This combination allow you to switch between the display and the external monitor.

• Satellite P300 - randomly turns off the power when connected to the external monitor

  Hello

  I have a Satellite P300, Intel Core 2 Duo T9400 2.53 GHz, 4 GB RAM, ATI Mobility Radeon HD 3650 512 MB, running Windows 7 ultimate x 64.

  Recently, I bought an AOC v22 led screen and connect my conputer via HDMI. Everything works fine, but sometimes my computer off just randomly. I might have something to do with my computer overheating, so I clean the fan, but this was not good.

  I think it has something to do with the LED screen because my computer was never off his own.

  Hello

  So this also happens if you n t connect laptop to external display? So, you can determine what is causing this problem.

  If the computer laptop doesn t turn off without external monitor, you should try to update the BIOS and the display driver. Two updates that you can find on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You close the lid if you have connected the external monitor?
  What operating system do you use?

  In addition, it would be interesting to know how you clean the laptop. That's why I use the jet of compressed air that can blow the dust from the cooling fans and you don't have to disassemble the laptop.

  Good bye