The files HAVE as links within a file, indesign to then be a pdf file, problematic?

I want to know if the files have linked to an indesign file, which must then be PDFed for the printer, problem somehow. I was always asked by my printer to have all my images within a PDF, CMYK value and saved in tiff format.

It seems that they should not be a problem, and that by converting the format tiff s i just lose in detail and it being a chore, as I have over 150 images.

Am I wrong?

art of John Johnson says:

What is a manual operation? where in illustrator I convert individually these or make me an option within indesign to do this to all the links of the eps?

You can record an action to save as .ai and close the file, then run that in the form of lots on a folder of files. But I do not convert batch if I am preflighting. When I control upstream I open all the files, look for problems and potential problems, sync (if any) color, perform the action to remove unused items from the Panel, then save as a new file. I have always save as .ai with PDF compatibility and, if possible, check that all images are linked not shipped.

Read my file for a file sizes have 370 Ko or there abouts, looks small (although we're talking here of line, maps, etc).

But I can read is inside my document setup, under 'Transparency' my balance pixelation/vectorization is 75 (in the direction of vector), my resolution for line art & text is 300ppi, gradient and mesh is 150ppi. don't know if I'm just throwing numbers at you, but that's what I got.

Those are the values by default of the effects of rasterization resolution (for example effect > esthetics > Drop Shadow) and gradient meshes are pixelated when you print or save a PDF file. I usually set up a predefined custom flatterer who goes completely to 100% and does not plan type or convert lines to fills. These are used for priting and record in PDF format only. Your .ai file contains a PDF high resolution whose Illustrator unknown when editing but that InDesign and Photoshop use to import.

The size of the file is irrelevant to the resolution of the built-in images. 370 KB is quite small, however, and when combined with your description of the content gives heavily to think there is no raster elements, so nothing to sweat. You can open the links Panel to see if there are images embedded or linked. I expect none.

Tags: InDesign

Similar Questions

  • I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What do I need

    I have problems with anchors named in my htm file. I clearly identify them as being in the document (ie., internal links within the file).  When I preview the file in a browser, the links point to my hard drive, which is totally false. What should I do to change it?  I use DreamWeaver 2004 on a PC.

    You will need to correct the links that begin with "file".

    Now that your site has been defined, you just delete the bad links and DW left write the good ones for you.

    Click on the yellow folder on the property inspector, and then select the target page.

    If your site is small, you can edit the links manually (remove the part in red)

    content.htm file:///C:/desktop/localRootFolder/subfolder/subfolder/images/

    It would be useful that post you your code on the page so that we can see if you use the old technique or new for these links.

  • May not know how make a slide in the show have a link in DW

    Hi - I am changing an existing Web site, that I inherited from a previous developer who's not here.  I'm trying to understand how to add a hyperlink in the cursor, I have inherited from him.  I don't know why it did not it easier to add a link to a slide, because many of them now take you somewhere when you're watching a slide show.

    In anyway, even if you don't see the slider not live because it is on a private network, I have posted a code here and here is an improvised version of the Web site:

    http://designerandpublisher.com/mwelectric/test-mockup.html

    This seems to be where you can make a hyperlink for slides:

    slide1.jpg

    This 'Exchange' is in fact the buttons so I tried to add links to the above "href" and they did not work and I don't want to make the little buttons in the way of a story of some sort (see below):

    slide 2.jpg

    I want to do is just make headlines for each slide of the hyperlink.  I tried to do this:

    slide 3.jpg

    by changing the class to access the descriptions which is in the CSS and then I added the text of the slide in the ref hoping that would work but he completely bumble.  So I hope that someone can help me.  Thank you.

    Caveat: I'm just stumbling around here. I tend to Occam's razor kind of reasoning

    (The simplest explanation is usually the right one).

    So I just added the link in the source code of your test page

    http://www.Google.com">The Science and Economics of an NRDAhttps://dev3.orr.noaa.gov/sites/all/themes/bluez/images/slideshow/slide-image-1.jpg" typeof = "foaf:Image" class = "slide-img" >


    Using Firebug, the link worked, and hovering over the image displays only the text desired with no display code.

  • You see landing page views and presentations in the form of a link within the ADC?

    I created the business conduct contained in E10 which includes a link to an Eloqua landing page containing a form Eloqua. The ADC is an Eloqua email. When I got the email with the CDA on the canvas of the campaign, it is not "related" to the landing page and the form as would do an e-mail containing a link normally. Is there a way to "bind" the ADC to the landing page and the shape on the canvas of the campaign, or Earn pageviews and remittances form since the show of CDA upward on the e-mail activity in Insight?

    If you add the LP to the campaign from the mouth on the left side (and then click to extract the same form element), will be associated with the campaign for the statement of purposes even without the link of the email be rendered on the screen.

  • When trying to open a link in Windows Mail, get the message: "the file doesn't have a program associated with it for performing this action."

    When you try to open a link in windows mail (Vista) get the message "the file doesn't have a program associated with it for performing this action. Create an association in the set Associations control panel

    original title: Windows mail in Vista

    When you try to open a link in windows mail (Vista) get the message "the file doesn't have a program associated with it for performing this action. Create an association in the set Associations control panel

    original title: Windows mail in Vista

    Usually, but not necessarily always, this problem has to do with your Intrenet Explorer or your main browser with NOT all its faults.

    Open start > default programs > set your default programs > column on the left, click on Internet Explorer or your main browser...
    He said "this program has all its defaults"?
    If not, click on choose by default for this program > put on check all entries in the list > OK when finished.

  • How to share a link to a file and have the other person to download the file without having to add them explicitly as a member, as does dropbox?

    With Dropbox, I right click on a file in my designated Dropbox folder and choose sharing link Dropbox.  This operation copies a single URL that I can send to anyone then download this file and this file only.  I didn't add people to my access list to allow the download.

    How do I do this with Oracle Documents?  I have an out of the large files that I prefer not to send by e-mail, however, I won't add everyone in society as a member to access my list.

    There is an option called public links that allows you to do. Select your article and click on share. This throws a pop up dialog box. On the left side of the dialog box, you can have 3 options - members, links, public links. If links Public option no there is not, then your service administrator has rejected their use. Links Public option is controversial in the enterprise space. Initial offering of DropBox didn't hesitate to the provision of the public links because the content was guaranteed to be owned by the user to dropbox. However, at the level of the company, the content belongs to the company owner, so service administrators can choose not to allow this feature. It's down to your organization.

    If you see the Public links option, click it and the right side of the pop-up dialog box will change. You can specify:

    • a name for each link you create (so you can keep track of what link is which).
    • Link permissions, only the following are available for obvious reasons - Viewer, Downloader, contributor
    • Link the Date of expiry - date after which the link does not work
    • Access - code an access code which you may disclose to the recipient expected by other means of your choice. This access code guarantees security on a link that could otherwise be used by anyone

    You can create several public links to the same article, and each of them may have the settings above, then you might have a link to downloaders and a separate link for contributors, for example. Each link can then be sent, either by copy/paste via the email button to the right of the link. You can also change the link using the pencil icon, so you it unexpire or reset the expiration date. You can also remove a link by using the trash beside him.

    I hope that explains the function public link.

    Kind regards

    Frank.

  • 2015.3 CC - have lost all the file audio problems video / links too

    I've upgraded to 2015.3 this morning.  Started working with a project that was shot entirely with a Panasonic GH2... and have never had any problems with it. Now in 2015.3, the project opens with none of the video on the timeline linked to their respective folders. When I try and make the link... video links and there is a message that tells me the audio isn't there... specifically the message is: the selected file contains audio media used by clip references in one or more sequences. These references to audio clip will be deleted and cannot Ωtre annulΘe. Do you want to continue? OK Cancel of course that I have to cancel, not knowing if the audio will be permanently deleted. Files from the GH2 are .mts files and it is certainly audio when played with a media player. So my question is... is this a problem with the format .mts or it's Adobe. I'm afraid to open another project that has files, .mxf or mp4 and brought them to the point completely dissociated.  Here is a screenshot.  Can I just go back to 2015.2 until find you it?

    Adobe2015-3 ScrnSht-DZPVideo.jpg

    Dave Speace

    Video DZP

    Core i7 16 GB 64-bit

    If it worked once I deleted all the files in the shared folder. Other problems are: first runs slower, stutters during playback and sometimes freeze clips or audio is not reading... I have to stop playback and restart. Also, string stabilizer would not be made on one of my clips. Should he hold PP6 and try it rendered as a new clip.

  • How can I disable retention to the files on your system within the Areader? Already have downloaded files in the download folder. Enjoy your reading utility, but do not want to delete the list. I thank you, Director, actuarial Systems IBM WE

    How can I disable retention to the files on your system within the Areader? Already have downloaded files in the download folder. Enjoy your reading utility, but do not want to delete the list. I thank you, Director, actuarial Systems IBM WE

    Edit > Preferences > Documents > open settings. 'Documents in the list recently used' zero value.

  • I have a document composed of separate PDF files that reside in a folder and are related to each other through hyperlinks. Each pdf file is set to open with bookmarks displayed, however if I have a link to a PDF file to another and use the button "Previou

    I have a document composed of separate PDF files that reside in a folder and are related to each other through hyperlinks. Each pdf file is configurΘ for dΘmarrer with bookmarks displayed, however if I have a link to one PDF file to another and use the "back" button to return to my starting point bookmarks are replaced by "vignette". Is there anyway to prevent this?

    Hi Mike,.

    While the implementation of the links, if you choose to open the file in a new window then you will not experience this issue, then you can simply switch to the file view and previous bookmark will remain as it is.

    Is that what helps with your query?

    Kind regards
    Rahul

  • How to remove a file that is linked to the file have?

    Hi, I reuse an old file I with a linked file and make some changes.  But I don't need the file linked in my file to have revised.

    Please let me know how to remove the file linked, so that I need not not to click on "ignore" in the pop-up window to remind me unable to find the linked file when I open the new file have every time.

    Thank you very much!!

    Hi lhcheng, I know that you can search for the file in your layers panel and delete (I must say linked file) even if its lack and that should remove it from the links aswell

  • Click on boxes that have a link to open a file or a URL do not work when the file is published.

    When you insert a click on a slide box, you are given the option to choose what happens "on success". I chose to open a file or a URL. When I press F4 to display a preview of the slide or a file, the links work correctly. But, when the file is completely released on a Flash SWF/HTM file, it does not work. The click box is here (Colombia-British hand appears), but no action takes place when it is selected. Please notify. Here is a screenshot.

    Help LInks wont work.png

    Hello

    The Captivate main page probably visited before validation is a landing called stickyzone.

    Unfortunately, you seem to have missed this area. If you had clicked on the topic frequently problems, you would have found your answer!

    Please see this topic using the link below and you will find your answer.

    Click here to see

    Useful and practical links

    Captivate wish form/Bug report form

    Certified Adobe Captivate training

    SorcerStone blog

    Captivate eBooks

  • Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.

    Cannot open new tab by going to the file/new tab (or CTRL + T or by clicking on the new field of the tab). One is to right-click on a link and choose open in a new tab.

    I found that the ASK toolbar is the culprit. I have no recollection of ever install Ask and wanted not just her in any case. Withdrawal fixed the problem.

  • When I click on the download link, Firefox pop-up window where I could choose open with or it isn't just to save the file, a pop-up where to save, why?

    Before the update, when I clicked on the link to download pop up window came asking me if I want to open the file with the program or just record, but after update I get not this pop-up window, instead I get the window asking where to save, how do I solve this problem, because I want to be opened with a program as if it were before the update of sertain files? I tried all of the solutions that I found, and nothing helps. I use Firefox on win7 ultimate x64bit 16.0.2

    Hello, Owner, have you tried to change what Firefox does not work when you click on or download a file

    Thank you

  • Show Microsoft Excel files in the download, but only empty software opens. You must then click on the link a second time for the file to open. ? Exchange

    By clicking on the links to files that Excel, used to work. In the last weeks of 2 (?) files are not open. I want to talk of the basic old .xls files.

    Clicking once, opens the Excel software only.
    Double click on open two windows with empty Excel software.
    By clicking on one to open the software. And then to go back to click a second time open the actual file.

    On all clicks, download popup box indicates the file to download. And no it does not appear on my desktop or in any other file.

    What you have in the following list - mine are all set to "always ask":

    Orange Firefox button or classic menu Tools > Options > Applications

    In the search above the list box, type or paste Excel to filter the list.

    You have additional modules related to the registration or downloading files that may affect the .xls files? You can review your modules here:

    Orange Firefox button or classic menu Tools > Modules

    Check the Extensions and Plugins categories.

  • Link to activate the HP Smart printing gives the file name with "_msi" instead of ".msi"!

    I have DL would be & installed the new version of BingBarSetup-partner. When I click on 'Activate' on the HP page for smart printing, the file tries to download me is "hpsmartprintbingbar_msi"! Note underscore instead of a point in the name of the file. Although IE won't let me DL the file because it does not have a legitimate file extension.

    I tried several ways to get the file, but no joy!

    I don't know this link, you download the .msi file, but you can get the .msi file to an average point round for download full software functionality from the link below, then simply by running the .msi. I would add as well the instructions for it below. Let me know what happens.

    Starting a download:
    1. run the disk cleanup on your computer
    2. download and run the software and the drivers below.
    http://goo.GL/jiHgM
    3. once the download is done retrieve, cancel the download.
    4. click on the start menu.
    5. click on run.
    6. type %temp% enforcement
    7. Locate and open the folder starting with 7z (example: 7zS2356)
    8 configuration open the folder
    9. open the webprinting folder
    10. run the smartwebprinting.msi

Maybe you are looking for

  • deployment of fiefox on window7

    HelloI have the Fund a Window7 model under wmvare and deploy windows 7. I have a problem with firfox config when a domain user use firefox for the first time, he needs to import bookmarks, choose the House and DΘsactiver the automatic update.In my (m

  • DAQ cards not selectable, that listed in MAX

    I have (re-) installing a PXI-6122 card on my computer. The device is then entered in the measurement and Automation Explorer, but differently from what I'm used to: -It's another symbol than two PXI-6259 cards I have (see image below). -It is not po

  • I can't get Windows Live Messenger to work on my wife's computer. I get the message error 0x80ee000c.

    I can't do windows messenger works with my wifes computer, he keeps coming with the error 0x80ee000c I have win vista and the wife is running to win 7thank you original title: error message

  • ObjectChoiceField - fixed the size of the field?

    Hi all I wonder if it is possible to make ObjectChoiceField of fixed width so that it would not change when the user chooses the different options? Usually, it changes to adapt to the length of string (of choice), but my design suffers from this prob

  • Possible to toggle preferred ldap account other user accounts

    HelloWe currently use an ODSEE 11.1.1.7.0 on Solaris 11, and is needed to connect to our main identity management system and provide them with a user that can toggle accounts expired, etc.I was reading the documents on the account activation and deac