The files seems to be not taken in charge or damaged

Similar Questions

• Changing from Pc to Mac now Lightroom gives error "files seem to be not taken in charge or damaged"

  I have recently updated my PC to a Mac osx 7.1.

  I have Lightroom 2.

  On my pc, I can pull up pictures out any of my SD cards (format: RAW). However, although I have installed LR2 on my mac it I cannot open one of them. It gives me the error, "the files seem to be East or damaged.

  They will be open on my PC and open also on my Mac in gimp. So I know that the files are not corrupted.

  How can I solve this problem?

  Thank you!

  What model of camera? You use the same version of LR on the PC and the Mac? What exact version numbers? 2.0? 2.1? It goes up to 2.7.

  HAL

• Windows media player 11 on downloaded videos error "cannot read drive file does not support the file type or does not take in charge the codec used to compress the file.

  • now that the full version of k'lite seems to stop what is happening why hasent windows incorporated something similar in the windows media player 11, or they have another type of codec full, we can use to make this.only so many people have the same problem .please can help you.

  Hi bbdunford,

  Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.

   

  You may encounter this error message for the following reasons:

  (a) the file type is supported by the drive, but the file was compressed by using a codec that is not supported by the player.

  (b) the file might have been encoded with a codec that is not supported by Windows Media Player. If this is the case, Windows Media Player cannot play the file.

  Windows media player will play only the files and videos only if it supports this type of file.

  Method 1

  Check if the video file format is supported by Windows media player using the link below.

  Information on the types of media files that supports Windows Media Player

  http://support.Microsoft.com/kb/316992

  If the files are not supported by Windows media player, then you will need to use a few players from third party that supports this file format.

  Method 2

  See the link below for more information on the codec.

  Codecs: Frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• I wanted to install an optifine download, but when I try to install on adobe reader, it is said file is not taken in charge or damaged

  I need optifine but my player says adobe file is not taken in charge or its damaged, so I can't get the optfine I wanted to

  Hi peytonrowles1223,

  As Pat says, Adobe Reader opens PDF files only. I think you may have better luck contact Optifine to find out why it does not work as expected: https://optifine.net/home.

  Best,

  Sara

• Code error 0x7E - the file 'autorun.dll' could not be loaded or is damaged. Setup cannot continue. Windows 7 Upgrade installation problem

  I tried to install Windows 7 Home Premium Upgrade, 32-bit version. My current system is an Intel iMac (later), with Windows XP - SP3 loaded as a virtual machine with Parallels Desktop 4.0 build 3848 (according to their website, it is supposed to support Windows 7).

  I allocated enough space RAM and HARD drive of the virtual machine to run Windows 7. No matter what I do, when I try to run setup.exe, I get the error message: "the file 'autorun.dll' could not be loaded or is corrupt. Setup cannot continue. Error code is [0x7E].

  The file 'autorun.dll' is present on the disk.

  I saw on the internet that other people have also had this problem, with or without Parallels Desktop, and get a replacement DVD of Windows 7 program made no difference to them. Nor is it an available answer, I've seen.

  My Windows 7 disc is new, so I was hoping that Microsoft could solve the problem for me?

  Thank you.

  
  

  
  

  OK, so, this response is a little late to come, but if you never solved...

  I just encountered the same problem - editing similar (Mac, Parallels 5 in my case, the SP3 of XP, MS Windows 7 Home Premium Upgrade) - you must make sure that the DVDROM drive hardware is mapped to "D:" on your XP installation. Thus on the Parallels Desktop menu go to devices, CD/DVD1 and make sure that all your actual DVD player is called is selected (should be the vertical entry in the menu) - not true CD/DVD. The reader should then start and auto run.
  I hope this helps...

• type of file, because the flow is not taken in charge or that there is a network error windows medi aplayer

  Original title: where should I go to report a question regarding a problem with Windows Media Player?

  Hello - I just upgraded my RealPlayer and I discovered that I can't read http://217.147.235.114 or http://folkradio.ge stream in Windows Media Player now - I either get a message saying that the file for the stream type is not taken in charge, (play the stream in RealPlayer).  I also noticed that one of the icons on my desktop to an audio file (barabombi.rm) has changed its former VLC icon to an icon of RealPlayer.  What happened, and how could I have Windows Media Player return as my default player for Folk Radio and VLC as default player for an audio file please?  Thank you!

  Hi Khevsur,

  · What version of windows media player installed on the computer?

  Try the steps listed in the link below and check if it will help: Windows Media Player Invalid File Format Error Message: http://support.microsoft.com/kb/234019

  To change the default program, you may consult: change the program by default, Windows XP uses to open a specific file type: http://www.microsoft.com/windowsxp/using/setup/hwandprograms/filetype.mspx

• Error "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file' when try to play wav or midi files.

  Original title: WMP "can't play wav or midi.

  Using WMP 11 on Windows XP SP3.

  Windows Media Player has somehow forgotten how to play wav or midi files. Doubleclicking either of these file types give an error "Windows Media Player cannot play the file. The player might not support the file type or does not support the codec used to compress the file. " There is a button 'Close' and 'Web Help' which still informs me, "you met the C00D1199 error message... ". ». Following the advice given nothing less than useful.

  I can easily play these files with RealPlayer or VLC so I don't think it's a driver problem, and it wasn't a corruption right after installing the other players. WMP seems to work OK when playing music or AVI. And there is no harm to hear a sound (wav or midi) in Windows for various system events. Have already uninstalled/reinstalled WMP without result.

  Thanks for your reply.

  I have since determeined the problem comes from an updated codec package I installed a few weeks ago. These codecs were from Shark007 which I believe is a Microsoft MVP. Use the codecs from this site for a number of years without any problems so I did not initially suspect it was the source of the problem. I uninstalled the codec pack and installed K-light package and everything seems to be Ok now. Now, I'll be in contact with the members of this forum.

• Windows Photo Viewer cannot open this file because the file seems to be corrupted, damaged or too big.

  I am on Windows 7 and using Photo Viewer to watch 5 tiff files. I can open all tiff files in photoshop or psp, but not in photoviewer. Here, I can open only 2 smaller files. Is there a limit of size on the photo viewer (it seems). The files that I can not open are 1.45

  Hello
   
  a. like you said that the size of file that 1.45, could you give the exact size in MB, GB or KB?
  b. Since the photoviewer is used to display basic tiff files, if the file contains additional metadata information that can not be played on photoviewer it could give you the error message.
  1 copy these pictures on another computer in Windows 7 and check if the files open.
  2. you can also try to change the file format and check if it converts in this format and it opens correctly.
  You can see the following article on changing the file format.
  Change the file type of the image (file format) using paint
  http://Windows.Microsoft.com/en-us/Windows7/change-a-pictures-file-type-file-format-using-paint
  Working with digital images
  http://Windows.Microsoft.com/en-us/Windows7/working-with-digital-pictures
  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• HTC One. Flash Player not taken in charge by the device?

  Hi I just got a HTC that comes pre loaded with flash player 11. However when I'm going to use Flash on a Web site, what happens with either you need to download flash or plug not taken in charge? When I check to see if there are updates are not. I can't uninstall because it is a system on the phone application. When I check on the applications section of the settings, it shows the app as 0 MB which seems strange, but maybe because it is pre loaded? What can I do? Any ideas anyone?

  Please see this page for a list of all certified devices:

  Flash Player certified devices

  If your device is supported, this FAQ will guide you through the process to install/update manually the plugin:

  How to manually install Flash Player on my Android device?

• HP Photosmart Premium C410A: error: an error occurred saving the file because it could not be written to. Check the properti

  I just upgraded to Mac OS 10.12 Sierra. Now my HP Photosmart Premium C410A apparently scans the document perfectly (I can see it on the screen of the computer when the scan is complete). However, he craps out when I try to save the document. Enforcement either abnormally is abandoned and firm, giving me this error pop up with ad nauseam screen computer jibberish, or I get the following error message: "error: an error occurred saving the file because it could not be written to." Check the properties of the file to ensure that it is not dead. »

  Scanning and saving documents are critical to my business. I just have to solve this ASAP. Looking for solutions. Any ideas?

  Hello

  It is incompatible with the Sierra of HP scanning.

  Applications > file HP travel HP Scan to the trash, then empty the trash.

  Download and install HP Easy Scan instead, it will be installed in the Applications folder:

  http://FTP.HP.com/pub/softlib/software12/HP_Quick_Start/OSX/installations/Essentials/HP-easy-scan-1_7_0.pkg

  Kind regards

  Shlomi

• The file... could not be opened. 10.11.4

  Hello

  just upgraded to 10.11.4. Everything works fine, but I discovered that I can't open any of my PDF files more. The file ' and if ' could not be opened. I can open these files with any other PDF reader, but...

  I really really want to like iBooks but this app is such a huge disappointment, and this version is no different. Why did they not hire someone who likes with it don't. iBooks is just pathetic!

  Thomas

  BTW, when I edited the post, I had to reselect the community. Why? Apple Software Quality feels more and more Microsoftish.

  A brief update here. After a few days the problem corrected itself. I opened iBooks and have downloaded all of the PDF files.

  Why wouldn't he download Collections created on the iPad to Mac?

• Portege 2000, the file fcpcmcia.sys is not found

  I want to install windows XP in a machine Portege p2000 but after the first reboot, the display shows only:

  The file fcpcmcia.sys is not found

  Press a key to continue.

  I have Toshiba phone and they can't help me. Any suggestions?

  BRIEGA

  Hello

  Tell me how you do the install. What is a 'clean' WinXP media that you start the computer from or is it a Toshiba Recoverymedia? Please describe the procedure a little more detail.

  BR

  Tom

• Satellite U200: The file 'setupdiu.exe' is not marked for installation of BT

  When I tried to install the last stack of BT on my Satellite U200 installation stops with this message:
  The file 'setupdiu.exe' is not marked for installation.
  How to handle this problem?

  Hello

  you say the last won´t of BT-stack install? Which version is on your system installed? Sometimes an installation program needs a specific previous version to be able install
  the next higher version.
  So where you downloaded the package?

  Would be recognizing some comments, can we get a resolution.
  Welcome them

• Media Player error play 3gp: the player might not support the file type or does not support the codec used to compress the file.

  The problem is that Windows Media Player cannot play the file. The error that says"the player might not support the file type or does not support the codec used to compress the file.

  The properties of the file are:

  3GP.PNG

  Hyper Text Transfer Protocol

  TYPE: A PNG Image

  How can I fix?

  The problem is that Windows Media Player cannot play the file. The error that says"the player might not support the file type or does not support the codec used to compress the file.

  The properties of the file are:

  3GP.PNG

  Hyper Text Transfer Protocol

  TYPE: A PNG Image

  How can I fix?

  Windows gives you integrated programs to open the image as png files.

  In Vista, use Windows Photo Gallery to open png files.

  In Windows 7, if you use it, you can use Windows Photo Viewer to open png files.

  If you have installed Windows Live Essentials, you can use Windows live Photo Gallery to open png files.

• Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).

  Windows update fails - the file specifies some updates not installed - 9 updates failed, code 80073712 and code 78(f).
  The update runs, and then told me that updates failed to install update automatik research, I had more failed updates that havew installed correctly.

  Hi Ben Dean,

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file.

  To run the System File Checker, follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. in the area of results, right-click cmd.exe, and then click Run as administrator. You will be asked to type the password for an administrator account. If you are the administrator or type the administrator password, click on continue. Then click on continue.

  3. at the command prompt, type Sfc/scannow, and then press ENTER.

  For more information, see the following Microsoft article:

  This article describes how to use the tool (SFC.exe) System File Checker to fix the system files missing or corrupted on Windows Vista or Windows 7.

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  I hope this helps!

  Thank you, and in what concerns:
  Shalini Surana - Microsoft technical support.
  Visit our Microsoft answers feedback Forumand let us know what you think.