My PS3 will not identify other readers, apart from my C drive

Similar Questions

• Vista will not format or remove windows from my c drive I need is no longer. He's always asking permissions, but I'm the only Admin

  • I have partitioned my hard drive incorrectly. I installed Vista on a partition that was too small. Then I installed another version of Vista on a different partition larger. Now I want to remove the small but it won't let me.

    
    

  http://www.Vistax64.com/tutorials/95418-disk-management-delete-extend.html

  Follow the news of removal on the link above.

  You should have 2 Partitions with different drive letters, if configure you it correctly.

  It would be a better idea to start over and reinstall vista, do a custom install, removing the two partitions and then reinstalling Vista the correct way.

  Read the info below:

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  See you soon.

  Mick Murphy - Microsoft partner

• Satellite A135-S2356 - BIOS will not identify SATA hard

  Hello everyone, hope you can help out me.

  Got a Satellite A135-2356 opportunity, everything seems fine but BIOS will not identify SATA HDD, shows no disk BIOS downgraded to 1.30, not good, upgraded to 1.40, not good. BIOS has no change/test/detection of HDD/SATA settings options. Tested the drive in another laptop and it reads very well. Received the Toshiba (Vista Basic 32) recovery CD, but given that the BIOS will not read the disk, can't do anything. Cleaned contacts, not good. This HARD disk must be too large, or something for the Board of Directors.

  * Hitachi HTS541612J9SA00 120 GB SATA, 5400 RPM *.

  Thanks for the help!

  Hello Richie

  To be honest, I do not think the disc is too big for your laptop. I can imagine that your laptop can handle with drives of 160 GB too. Unfortunately there is no public document on the possibilities of HARD drive upgrade. I can imagine that ASP in your country has information about such things.

  It's also quite strange that HDD is not recognized correctly. Long ago, I had the same problem. Every time when I used F12 at startup disk HARD were not as boot device. Solution in my case was to upgrade the BIOS to the default settings. I believe that your BIOS has already the default settings, but try to do it again.

• Acer Aspire E5 - 511. move the mouse/Touchpad cursor, but will not open other than McAfee programs.

  Just bought this laptop, original thought it was a big improvement on my Aspire 3 year!   Last problem after doing a full scan with McAfee is the touch pad or remote control will move the cursor but will not open other than McAfee programs.   The Windows (bottom left) symbol does not illuminate when the cursor is over it and I am unable to use the windows key + C to get the bar of charms.

  For the background, I couldn't install windows updates since I got this computer, two days, so do a scan to look for the reasons.

  Thanks for your suggestion Acer-Justin.   Sorted by switching off / reset the keyboard.   Problem sorted update using Microsoft who has found a problem with the update system and then installed Windows 10 - everything looks ok at the moment.

• HP Photosmart Prem 310a went offline suddenly and will not identify the SSID to run the Network Setup Wizard.

  All of a sudden the printer has gone offline a few days ago.  Went through all the diagnostics, etc. but nothing fixed.  A solution-Assistant will not work cause it will not identify the SSID of the network that he has done since it was installed (long ago).  Have tried everything I can find online, unless I don't understand or is not quite apply and still nothing.  Wireless network works with everything except the printer. I am not very computer so I do not understand most of the letter & numbers abbreviations used here.  Help.

  It may be a heat problem - radio from the printer gets flakey when it's hot.

  Finding 5 wireless networks should - Yes you have one, but your neighbors also have.

• now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update

  Now that I've updated to El Capitan, my Brother DCP will not work and I can't find a driver update. Everyone finds something?

  Here are the current models of Brother products which are supported.

  http://support.brother.com/g/s/ID/OS/Macintosh.html

  If your model is supported drivers will be on this page. Otherwise, contact the manufacturer and see if they have a driver for your printer from specific model for this OS. Otherwise, you may need to downgrade to a previous operating system from a backup Time Machine or a downgrade for compatibility, if it is not offered by the brother of your device to model on a computer running OS 10.11.

  Apparently not all printers DCP mind are compatible, but most that were compatible with the OS 10.10.x always conform to their page.

• My office print 8600 ProPlus will not print pdf files sent from an iPad with ePrint.

  My office print 8600 ProPlus will not print pdf files sent from an iPad with ePrint.  I just get an error message when I go to the HP Eprint centre.  It prints the address email of the coverage, but nothing else.  The attachment is not sure that I can see.  I tried to send an attachment from my Mac and worked well.

  Thank you for your response and I am sorry for the delay to return to you.  I tried save the Pages document in a Word document and send it to the printer using ePrint but it is even.  That is to say the handout printed but not the attachment.  However, when we removed the accompanying document and sent the attachment in its own it has worked well for we have managed to solve the problem. Thank you very much.

• I am trying to download adobe reader, but it will not complete the download because there is a "drive not valid error 1327: J:\. "box that appears

  Original title: I have windows xp.  What does "drive not valid error 1327: J:\. "means and how to fix it?

  Hello

  I have windows xp and I am trying to download adobe reader, but it will not complete the download because there is a "drive not valid error 1327: J:\. "box that appears. I have no idea what this means or what to do.  I didn't know that there was such a unit, because I can not find it. I hope someone can help.  Thank you.

  Hello

  1. are you able to download another program?
  2. you have any program installed download accelerator?
  3. what browser do you use?

  Read the following article that may help you resolve this problem.
  Error 1327. "Invalid drive" | Install | CS4, CS5, Acrobat, Reader
  http://kb2.Adobe.com/CPS/404/kb404946.html

• I have 12 items. I just downloaded the most recent update. It will not open the RAW files from my Panasonic TZ70?

  I have 12 items. I just downloaded the most recent update. It will not open the RAW files from my Panasonic TZ70?

  See the faq for the compatibility of ACR:

  FAQ: Photoshop Elements will work with my camera, or why does not open my raw files?

  Your camera would need ACR version 9 which is not supported by 12 elements.

  You can:

  -upgrade to 13 items, with updates of version 13.1.1

  - or use the free DNGconverter mentionned in the links at the bottom of this faq. You'll be able set of entire folders to convert your raw files to DNG PSE12 can read and modify.

• IMac 27 "10.11.3 suddenly will not identify Icloud password

  My computer was working perfectly until this morning, and it seems that a lot of my preferences have disappeared. The computer starts not in recovery mode or in safe mode. I can boot from an external drive for backup, but I want to reinstall El Capitan (sigh), but my password is not just recognized in the App store and I said 'contact support '. I have two other laptops that I could use with target mode, and all my files are backed up on an external drive and Dropbox. I have not done this for a long time and need some advice on how to reinstall El Capitan on my Imac. Have no idea how she became corrupt. The computer has a drive of Fusion and is around the age of 7 months. Have not contacted Applecare that I was not sure if they helped with a software problem.

  Since it is under warranty, why don't look you at the Apple Store for repair. If the drive has failed, it will be replaced free of charge.

  There are three ways to reinstall OS X. The first is to re - install on the existing system (must be the same version) which does not erase the drive. The second way erases the disk and reinstall the original version of OS X, which was preinstalled. This does not work if the computer came out before 2011. The third way is for the older pre-2011 machines on which you first need to install Snow Leopard after erasing the disc.

  You don't have a Lion installed, as indicated in your profile if you have an iMac which is only 7 months old.

  
  

  Reinstall El Capitan without erasing the drive

  Make sure that you have a current backup before continuing.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Repair

  When the recovery menu appears, select disk utility and press the continue button. Disk utility charges and select Macintosh HD entry indented from the list on the left.  Click the first aid tab in the toolbar... If disk utility reports any errors that have been corrected, then re-run first aid until no errors are reported. Wait until the operation is complete, then quit disk utility and return to the main menu. Select restart from the Apple menu.

  Reinstall OS X: Select reinstall OS X and click on the continue button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible because it's three times faster than Wi - Fi and more reliable.

  
  

  Install or reinstall OS X from scratch

  Make sure that you have backed up your files because the following procedure will remove all of the hard drive.

  HD recovery start:

  Restart the computer after the ring, press in and hold the COMMAND and R keys until the menu screen to appear.

  Erase the drive:

  1. select in the main menu disk utility and click on the continue button.

  2. once the charges of THE select your boot volume (usually Macintosh HD) in the

  list on the left. Click on the Erase tab in the main window of THE.

  3. set the type of format Mac OS extended (journaled). If necessary, click

  Security and button all the option data from scratch in a single pass. Click

  the clear button and wait until the process is complete.

  4 leave FROM and return to the main menu.

  Reinstall OS X: Select reinstall OS X and click on the install button.

  Note : You will need an active Internet connection. I suggest to use Ethernet if possible

  because it is three times faster than wireless.

  This should install the version of Mac OS X that you had installed it.

• OfficeJet 6500 has more - black print cartridge will not print - other colors will be printed

  OfficeJet 6500 has more the black cartridge will not print.  I put in a new cartridge, so it is there

  ink.  The printer works, because the other colors of printing.  It worked very well and when

  printing, black has slowed and now does not work.

  I called technical support.  Megan has been very helpful to me through the steps to

  clean the print head.  Unfortunately, the black cartridge still does not print.  I have

  has ordered a new printer, the 6700.  I appreciate the help of Megan and will be happy to

  have a new printer.

• New user account will not identify you. Error Msg: "the user profile service has no logon. Already tried the registry option (list of profile edition)

  Hi guys,.

  (I already tried this https://support.microsoft.com/en-us/kb/947215)

  I have usually need two accounts on my system. I lent my laptop to a friend for a few hours and asked him to connect with the guest account but he got "the user profile service has no logon. User profile could not be loaded"error message. So I tried to create new accounts (standard and administrator), but nothing works. I am able to connect to my account but not to other accounts, I have create on my system. Pls help

  OS: Windows 7 Home Premium

  Hello Shashank,

  Thanks for posting your query on the Microsoft Community.

  I imagine the inconvenience that you are experiencing and I appreciate your efforts taken to solve the problem.

  I suggest you refer to the suggestion of Nithyananda J replied on February 15, 2010 and check if that helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Security/Windows-7-Administrator-logon-failed-user-profile/04652778-1646-4bc9-9f5f-1c20273af15b

   

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: How to back up and restore the registry in Windows

  Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.

  Thank you

• I have two computers in Windows 7 which will not each other on my network. All other computers will see and can share files, but they connect between them.

  My HP laptop has installed Win7 Ult, the Fujitus Win7 Pro.

  Both computers were sharing the files back, outside a residential group, for a period of time. One day, they are stopped. No changes have been made to computers. I tried a restore of the system on each of them, and it did not help. I re windows loaded on the HP and that did not help. I don't think that it is only a permission of the questions that I used a windows machine 7 third to map actions to each of the individual laptops using their respective IDs. I can transfer files from one of them the "machine in the middle", then the action of the other, or as a copy/paste between them directly.

  WSD and NetBT will not solve one machine for others, but all other computers on the network will dispay on each machine. Only, they refuse to see each other. I have disabled the firewall. Password protected sharing, ensured that all netbios in the registry settings are correct. Pings between them are inaccessible returnded.

  Any help would be appreciated.

  Thank you!

  Hi Jonathan,.

  I see that you two computers on the network cannot see each other. I'll help you with this problem.

  1. don't you make changes to the computers?

  2 are computers on a domain network?

  3. do you have a router connected to these computers?

  Method 1:

  Open the HomeGroup troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2.

  Make sure that the following services are enabled on the computer.

  (a) click Start, type "services.msc" in the search and click on services. Verify that these services are enabled:

  -TCP/IP NetBIOS Helper service

  -DNS Client

  -Function Discovery Resource Publication

  -SSDP Discovery

  -UPnP device host

  To start the service and set it to automatic, follow these steps:

  (b) right click on each of the services listed above and click Properties.

  (c) click the general tab, and then, next to startup type, select automatic.

  (d) click on apply and then click Start.

  Method 3.

  I suggest you follow the steps in this article.

  Enable or disable network discovery: http://windows.microsoft.com/en-US/windows7/Enable-or-disable-network-discovery

  Method 4:

  Why can't I connect to other computers?

  http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-connect-to-other-computers

  Refer.

  Homegroup:

  http://Windows.Microsoft.com/en-CA/Windows7/products/features/HomeGroup

  Let us know if you need assistance with any windows problem. We will be happy to help you.

• Cannot complete installation of Live TV. Media Center will not identify Directv remote. Is there a solution?

  I have a Dell PC with Vista Home Premium.  Until recently, when the operating system had to be reloaded, I watched decoder of live TV on Media Center for the past two years, using a Directv.  I have tried to re install the TV, but cannot complete the process, as my Directv remotes are not recognized.  The signal is fine (as of the previous steps shows the appropriate image and the signal, but the installation process cannot be performed due to the problem of distance not recognized. (The remote functions of the Directv box very well). How can I find use of the tv, Setup finish signal?

  Hello

  You won't get HDTV without a Digital Cable Ready tuner and a cable card. How about you
  will have need a HDCP compatible graphics card and a TV/monitor taking support this
  as well.
  The kit Hauppage offers is substantially the same as I told you.

  clear QAM availability varies according to the cable company. most begin to encrypt
  everything.

  > The same can be done through Windows Media Center, by clicking the video image by clicking on Zoom. But in MCE when you have a cable box, you will also need an approved Microsoft IR blaster to control the cable box. If you n? not have this part, you will get the IR hardware not found error. The HVR - 950 Q does not come with this, but if you really want to use Media Center, you can buy a kit from our online store here http://store.hauppauge.com/hardware2.asp?product=mce_remote remote"

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-cant-detect-dvrset-top-box-but-finds/43a9685d-d093-4cfa-88ac-17132a1e5b53

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cannot-complete-Windows-Media-Center-Setup-IR/6db1ada7-3380-44a2-A369-268e5cd7c013

  http://Windows.Microsoft.com/VI-VN/Windows-Vista/troubleshoot-problems-with-watching-TV-on-your-computer

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/Media-Center-will-not-set-up-TV-because-Windows/5c038734-7bb6-48D4-AAC9-f4dee9a3d442

• XPS 8300 will not identify data reader 5 to

  I have a desktop computer XPS 8300, Windows 7/64, 12 GB of RAM. Boot drive is a 500 GB SSD, and there is a SATA 2 TB of data. I'm a photographer, so I need a lot of data storage.

  I just bought a Toshiba MD04ACA500 5 to to use as a data drive (NO boot).

  My XPS 8300 can see the drive, but insists on the fact that it contains only 500 GB of storage, not 5 TB. I did the following:

  • Run Diskpart from a DOS window.
  • Run Diskmgmt.msc;
  • Run the tool to partition a third party
  • Also, I went through Windows KB 2581408 procedure of adding a player of great size.

  No matter what I do, the drive is detected as only 500 GB.

  The XPS 8300 is possible to work with a 5 TB drive? If so, how?

  Thank you, Ed

  Disks over 2 TB software needed to work with disks of large capacity and NEED 64 Bit Windows.  INTEL RST integrated in win7 is 8.x, which means that he WILL NOT see large capacity disks. Seagate manage it with the driver and utilities.

  • 2 t of learning beyond
  • Interactive Guide for disks more larger-Than - 2 TB

  http://www.Seagate.com/support/downloads/beyond-2TB/

  INTEL RST 10.1 at least is NECESSARY for advanced format drives.

  With windows vista or 7 install ATA mode then the microsoft patch is necessary before moving on to the AHCI.

  https://support.Microsoft.com/en-us/KB/922976

  Once passed to Ahci and work, you install the version of the RST that works for your model.

  Latest and most recent versions of the decline of the RST support more older chipsets.

  The latest 15 13 or 14 or 11 or 12 may not work.

  Before 9.x, it was called MSM (Matrix Storage Manager)

  It changed of MSM to RST in the 9.x versions.

  10.1 or greater is required for the GPT partitions greater than 2 TB.

  9.6 or higher is required for larger than 120 Gig aka advanced format drives.

  V9.6 driver Intel Rapid Storage Technology (RST) and above.

  http://www.Intel.com/support/chipsets/IMSM/sb/CS-031502.htm
  http://www.Intel.com/p/en_US/support/highlights/chpsts/IMSM

  9.6.0.1014

  https://Downloadcenter.Intel.com/download/15251

  10.1.0.1008 is the version of transition.

  https://Downloadcenter.Intel.com/download/20104

  10.6.0.1022

  https://Downloadcenter.Intel.com/download/20707

  11.0.0.1032

  https://Downloadcenter.Intel.com/download/20868