The FMS Core failure
HelloAll of a sudden I get lots of "Faulting module FMSCore.exe" errors/warnings fill my application event log. I hope that's not because, but I excluded her, the KB958644 security update affecting the day before.
Connect and the server information.
Is the version of Connect 6 SP3 with, it is a basic installation (not a plus) with the DB/content on the local disk, the server is a Dell PowerEdge 1950 pretty decent (running SP2 Enterprise of Win2k3), I still haven't it patched for the debacle of Flash Player 10 but aim to do so soon.
----------------------
The details of the Application error are:
Category: (100)
Event ID: 1000
Application FMSCore.exe, version 2.0.2.61, module FMSCore.exe, version 2.0.2.61, fails failure failing 0x001ca726 address.
----------------------
Then, I get a lot of these warning messages in the application event log:
Source: FMS (Edge)
Category: (264)
Event ID: 1213
Connection refused by the server. Reason: [Server.Reject]: _defaultVHost_ of the virtual host is not available.
----------------------
Someone would have seen something similar happens?
I don't know much about Flash Media Server any idea would be appreciated.
Thank you
If
Hello Lauren,
In fact, when I had finally round to apply the fix for Flash Player 10, when the service wasn't busy, all these errors suddenly arrested!
Sorry, I should have closed the subject, but thanks for the reply.
Thanks again,
If
Tags: Adobe
Similar Questions
-
Installation in silent mode of the FMS?
Is it possible to do a silent install of the FMS on a Linux platform? Don't generally install us Xwindows libraries unless absolutely necessary. I don't see any information in theinstallation and Setup Guide for 5.6.10 i indicating there is a way to do it.
This is specified in edocs under silent mode
Although in this KB article "what is the syntax for a mode Setup silent FMS or upgrade on Unix / Linux?
https://support.software.Dell.com/kb/sol78202
Please note that you don't have to have xwindows installed, you can also run Setup with-i console for a text mode install http://edocs.quest.com/foglight-storage/300/doc/Core/Installation-unixEmbedded/IG_Before_Installing.4.php
Hope this helps
Golan
-
Hello.
I'm running a FMS 3.5 and I need to turn on my logs.
I use sawmill to analyze log files from this dedicated FMS, and I need to be able to collect information on
(1) my VOD file - located inside the \program files\...adobe...\FMS...\VOD etc.
(2) live broadcast: when I use GFFE to send a stream to my server, I would like to see these logs as well.
I watched online in a few things... I found a document from Adobe, which mentions a SERVER.xml file and a tag that controls the logging. Mine seems to be enabled but I don't see any information about VOD I purge my viewers of the VOD directory, and I don't see any information on the live stream I send to the server.
Could someone please provide me with a simple step by step to do this activate and start logging of all data that I using the FMS, on-demand and live stats?
Thank you for your time.
Newspapers of FMS is lit to be default, so you should see things are connected. Maybe you're looking in the wrong place. There are three types of newspapers - one is access.00.log which tells you in details about connections, jet start/stop and other things, is then diagonistic newspapers that tell the State of FMS (edge.00.log, core.00.log, master.00.log) & is third in application logs that you should see under each application log directory (this basically will display all of your instruction trace code from application & errors as appropriate).
For all traffic related things - you should check access.00.logs - you should see under
/logs -
Re: Qosmio G50-10 t: How can I use the Quad - Core CPU Toshiba HD?
Hello.
And how you can use several Toshiba Quad Core HD processor with four RISC SIMD 128-bit processors in the Qosmio G50-10 t except that: enables support for H.264 encoders / HD / MPEG2 decoders, with functions for convert, transcode, navigate using the face (Face Navigation) detection and control actions. INJURY is not used!
Maybe someone knows some software sales in which it could be used.
Hello
This Quad Core CPU is an additional processor that is not always in use.
It was designed in the order using the main processor in some of the media process.
For example, the Quad Core CPU works during the encoding or decoding of certain video standards. If you want to change it the standard of the video, the Quad Core CPU helps you complete this quick procedure.In addition, it improves the quality of the video (not HD). So, theoretically, you can view the videos in HD quality.
Of course, you won't get the same quality as a film that has been recorded in full HD, but the Quad Core helps you improve the 576i pictures. -
HP Pavillion P6347c: Allow the processor cores
This is the second time that I post this question, now with more information. I ran the HP Hardware Diagnostic and Test "Multicore" informed me that "only two of the four cores are enabled. How to activate the other two hearts? When I search the computer for the amount of available cores, it is said that two nuclei, yet all other research say that there are four cores of the processor. When checking with the Manager tasks two cores work. The processor is the AMD Athlon II X 4 630 processor. I checked in msconfig and still only 2 cores are available. Here, any help would be greatly appreciated.
Hello
Device Manager displays both physical and logical processors.
Download CPU - Z to verify that you have actually 4 cores and 4 wires. The default CPU tab shows the number of hearts and son down. This tools will flush out the inaccuracies with Windows may report errors. This tool should "dispel" you.
-
Hello
I use post step reminder of failure to manage failures in my sequence. The sequence of reminder post not failure has many steps inside. I realized that other reminders like post step runtime error reminder and Post result list enrty do not work to get the stage Post failure callback procedure. Any suggestions for the error handling in the reminder of failure stage post?
I also generate a report for the steps in the reminder of failure stage post. How can I do this?
Thank you
Yvette
Thanks for your reply. I use developed approach for reporting. I uses the property Locals.Resultlist of the recall of step seq file post failed to accumulate the results and have a LabVIEW VI in the Group of the cleanup step to remove the results of the local population. List results and writing in an excel file.
Thank you
Yvette
-
I bought a HP b110 printer 1 year and there are 8 days, so is no longer under warranty. Yesterday, when trying to print, I got the following message: "failure ink system - error 0xc19a0003. I have renewed all the ink cartridges (I only use original HP) to nothing does not...
Any ideas would be appreciated.
Thank you.
Hello
As OEM HP is responsible for the good operation of the printer and their
drivers provided. Check with HP support, their documentation online and
drivers and ask in their forums.Good luck, you need to update or reinstall the latest driver.
HP support/troubleshooting & drivers
http://welcome.HP.com/country/us/en/support.htmlContact HP
http://welcome.HP.com/country/us/en/contact_us.htmlHP forums
http://h30434.www3.HP.com/PSG/=============================================
The main issue is probably the drivers, but these can help:
Add or remove a printer
http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printerSolve printer problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problemsOpen the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-TroubleshooterFind the manufacturer's Web site
http://Windows.Microsoft.com/en-us/Windows-Vista/find-a-printer-manufacturers-websiteFind and install printer drivers in Windows 7
http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-driversI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
-
Power on the usb hub failure?
Power on the usb hub failure is it affects all hubs and devices that connect to the hub?
Hello
If the surge is important enough to fry a USB hub then it can damage the other devices connected with it. If it is connected to a computer, that power could prevent other devices to get affected, getting itself damaged in the process.
-
Try to publish the storyboard to DVD table. Opens in windows DVD Creator but when burning process is proceeding stops encoding and message appears "unable to create the DVD-catastrophic failure" of ideas where I'm wrong.
Through the resolution as indicated here: -.
http://www.WinMatrix.com/forums/index.php?/topic/18361-catastrophic-failure/
S.Sengupta Media Center MVP
-
How to remove old Services of FXM of the dashboard of the EU in the FMS
How to remove old Services of FXM from edge of the EU in the FMS?
We have removed the few services of FXM, but again, we can see that in the EU in FMS dashboard. Please suggest measures to clear those FMS.
Hello
End-users objects exist generally in the administration server > data management (note the fxm and fxv nodes)
but they may exist in other places (according to what dashboard they appear on).
The caution would be to open a support case and support check that right objects are deleted in the right place in the data tree.
Hope this helps
Golan
-
I want to write in the log FMS of a rule. The following code works from the script console:
println "output from test '.
However when I put this in the rule condition I get no output in the log of the FMS. I do something wrong or isn't it possible? Or is there a better way please let me know.
Thank you
Kris
Yes, it is possible to write in the FMS log within a rule or an expression of varying severity. As long as your logic is called in the rule condition, you should see the output in the FMS log file.
David Mendoza
Foglight Consultant
-
I am running Vista Home Premium and have been using the backup and Restore Center for weekly scheduled backups. I noticed that I get messages when I log on saying that Microsoft Windows backup has stopped working. However, the incremental backups always to be at the agreed time. I have just deleted a backup set and went to start a new backup set, and now I get the same message:
Backup Microsoft Windows has stopped working, then he's looking for a solution that does not, and then told me "a problem caused blocking the program works correctly. Windows will close the program and notify you if a solution is available. "I have to click on the button - close the program. She did this whenever I try to start a new backup set and I #m using an external USB hard drive that has plenty of space for what I want to do.
Any ideas - can't seem to find the answer that way.
Thank you
Bretty1Hi Bretty1,
I suggest you follow the steps mentioned below:
Step 1: Ensure that windows that backup service is set to automatic and started. To do this, follow these steps:
1. click on start-run, type "services.msc", click on OK.
2. when the Services window loads, go to "backup windows", double click on it to open it.
3 make sure that the "Startup Type" says "automatic"and has begun.» If it isn't, use the drop down menu to change.
4. If he once said: "Automatic", then click on the "Recovery" tab in the upper part and replace the line "First failure" "Restart the Service", then click on ""apply ', then OK. "
Step 2: To start a new backup with elevated privileges, follow these steps:
(a) click Start in the start search bar type cmd, right-click on the command prompt icon in the box programs and then click Run as administrator.
(b) at the command prompt, type sdclt /kickoffnew and then press ENTER.
See the link below, which deals with a similar question:
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Hello
I use Windows 7 (32-bit) with SP1.
Quite often (at least three times a day) I am to be locked of my PC and cannot connect to 30 mts each time. I've analyzed carefully and there is absolutely nothing wrong with my ID on the front of Windows AD or group etc. policy.
I am getting event ID 40690 in my observer of events and here are the details...
WARNING on 09/06/2011 09:07:54 lsasrv 40960 any
Log name: System
Source: lsasrv with
Date: 09/06/2011 09:07:54
Event ID: 40960
Task category: no
Level: WARNING
Keywords:
User: SYSTEM
Computer: workstation.companyname.com
Description:
The security system detected an authentication for the HTTP/http-proxy server error - nom_societe.com. The code of failure of the authentication protocol Kerberos was "the user account has been automatically locked because too many attempts to invalid login or password change attempts have been requested.
(0xc0000234).
I searched all possible sites and cannot find an appropriate solution.
As it is causing a lot of inconvenience would appreciate a miracle solution as soon as POSSIBLE.
See you soon,.
bcshekar
Hi bcshekar,
The question you have posted is related to the area and would be better suited to the net Tech community. Please visit the link below to find a community that will provide the support you want.
http://social.technet.Microsoft.com/forums/en-us/w7itprosecurity/threads -
Help to find the FMS variable used in cartridge JavaEE to screw the CPU usage
Hello
in the FMS javaEE cartridge dashboard, under the section of the JVM, there is a graph that shows the 'use of processor Threads.
We would like to create a rule/alert when the CPU using this particular thread reaches a certain threshold. But we find it difficult to know what variable data drives it.
Please see the attached word doc shows this table that sits on the dashboard JVM.
Does anyone know the data variable - or how to find it?
I tried to open the graphic, but you do not see the data hierarchy.
Thank you very much
"mark".
It must be under your application server's JAVA virtual machine.
If you create a new dashboard and you open the app server data tree and go to the jvm, then go to threads > cpuTime you will find these data.
If you copy the 'JVM for deadlocked Threads' rule and edit rule to compare #cpuTime # threshold, it should do the trick.
Golan
-
How to activate the mode without failure in a game?
U see sometimes games run faster in mode safe & probably, I like it but I don't know how to activate it in gaming applications only in games ok?
How to activate the mode without failure in games?AI
Most of the games do not work in safe mode, because safe mode loads only the system drivers and not the games so it is really moot to wonder if he would run faster.
You can start in safe mode by pressing F8 during startup. You will see that the game does not load again.
Maybe you are looking for
-
Firefox fails to load the entire page
When the next page loads, it should finish by posting several links of social media on the left side.I understand that these come from an external site which is accessible once the home page is loaded.I use v26 of Firefox which is the same as the dev
-
Cannot change the Google search bar
In Safari, I go to Google.com and do a google search. So far so good. Now, on the search results page, I try to edit the search in the Google search bar and nothing happens - the Google search bar is totally insensitive. To do another search, I use t
-
Keysight 34908 has w / command Expert vi just stops working
I wrote a program to work with a KeySight 34908a using sub KeySight vi generated using Keysight expertise. The call to the Keysight unit is below. Just, the code loops through a period defined by the user, reads the Keysight and plots and saves the
-
How to enlarge a fill of tp copy the entire page when printing Thank you
-
Update Vista installed and wiped out the computer laptop everything!
I was invited for a Windows Update so I've updated, then he said he had to restart, so I rebooted and it crashed, I tried safe mode, but it wouldn't restart finally got to restart. Now, everything has been removed from the laptop, all data and progra