Update Vista installed and wiped out the computer laptop everything!

Similar Questions

• HP all-in-one-24-g085na: Virus has wiped out the computer

  Unfortunately downloaded a virus and all partitions on the drive hard lost, y at - it a recovery disk which can buy to reinstall the bulkheads, OS and software drivers.

  @arthur-d1, welcome to the forum.

  Here's a guide that will help you order the recovery media if you don't make them when you purchased the computer.

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• When I try to call someone on Skype, he throws the internet connection on the computer laptop everything.

  I get very frustrated not being able to make Skype calls on my Samsung laptop (new last November and using Windows 7). Whenever I try to do a video call to someone it disconnects my laptop WiFi. I have to use my phone through the same wifi that works well. I don't understand what is happening on the laptop to get there. I tried to uninstall and reinstall Skype about 3 times. Has anyone else had this problem or could suggest a solution please?

  Hi SueDavison,

  I understand that when you make a video call via Skype, the internet disconnects.

  I suggest you refer to the suggestions of Tamim from the following link.

  http://community.Skype.com/T5/Windows-desktop-client/Internet-disconnects-when-using-Skype-and-playing-games/m-p/978434#M72294

  To make a video call (Windows desktop)

  https://support.Skype.com/en/FAQ/FA3681/making-a-video-call-Windows-desktop

  Hope the above information is helpful.

• I have instaled my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it

  I installed my creative suite the other day because I had to reinstall windows 7, I had problems while I had to do a system retore that wiped out the installation. I try to reinstall it and that is to say that the Setup program will not initialize, it's because I'm trying to reinstall it in a short period of time

  See link below and check:

  https://forums.Adobe.com/thread/1848277

• Updates Windows 7 has won 13 59 while finalizing the upgrade to Windows 7 from Vista. I shut down the computer?

  Updates Windows 7 has won 13 59 while finalizing the upgrade to Windows 7 from Vista.  I shut down the computer?

  Yes. Close and restart, the updates will catch up.

• Get 'no scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. "

  Original title: Windows Fax & Scan

  Hello, I just bought a new printer (Canon MG2450), and every time I try to scan something an error comes out.

  The error that says:

  No scanners were detected. If a scanner is installed, make sure that it is turned on and connected to the computer and try again. For more information about adding or troubleshooting scanners, see Help and Support.

  the printer is powered on and connected. I tried searching the Internet and I tried the TWAIN_32 and everything is good.

  What can I do?

  Daniel Capelle

  The scanner came with a CD to install the software?  Some more recent does not come with a CD, you must go to the Canon Website and you get the software.

• I updated to windows Vista business and I lost the Hybernation option... what I can do to recover this option?

  I updated to windows Vista business and I lost the Hybernation option... what I can do to recover this option?

  Thanks in advance...
  Joe

  Hello

  Try this link:
  http://support.Microsoft.com/default.aspx?kbid=929658

• Fatal error occurred during installation of the file. The willingness of cleanup now install and get out. so that the installation of BIAPPS 11 g

  Hello

  I install BIAPPS 11.1.1.8.1.  I finished the configuration of BIAPPS and finally come to upgrade weblogic 10.3.5. to 10.3.6.

  I stop all BI services and restart the server. After a reboot, I stopped the Oracle WebLogic NodeManager

  at the time of the upgrade of the 1.3.5 weblogic server. to 10.3.6. I got the following error:

  "Fatal error encountered during the installation of the file. The willingness of cleanup now install and get out! D:\Middleware\wlserver_10.3\server\win\x64\wlfileio3.dll(the process Cannot access the file because it is being used by another process)'.

  Could you tell me please even if I stopped all services why I have this error and to overcome this problem what steps I must follow.

  Thank you.

  Hello

  I got the answer that we must stop services databases oracle as well. We must stop DBConsole, NodeManager, TNS Listener and Oracle service and then start the 10.3.6 weblogic upgrade...

  Do all this, then upgrade will be smooth.

  Thank you

• My work PC operating system has been recently updated from Windows XP to Windows 7.  An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done.  I registered it again online but every time I open a fil

  My work PC operating system has been recently updated from Windows XP to Windows 7.  An older version of Adobe Acrobat (standard 7) has been installed and reinstalled once the update has been done.  I registered it again online but everytime I open an Adobe Acrobat file, a message appears that I need to register even if it is already registered. What can I do to stop this?

  Hello

  Acrobat 7 is not supported and an older version of Acrobat.

  Also, it is not compatible with Windows 7.

  This could be the reason why you are faced with it.

  Please see this link.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

  Concerning

  Sukrit diallo

• mediaget2 is installed and running on my computer, how can I get rid of him?

  Original title: program installation

  I learned that a program called mediaget2 is installed and running on my computer. I tried to open the program, but nothing has been posted. When I tried to uninstall, I was told that the program was running. Please help me to get rid as I

  cannot open or uninstall.

  If you use Windows XP, you should uninstall it by going to control panel, click Add/Remove programs. Scroll down to MediaGet2, and then uninstall it.
  If you use Windows Vista or Windows 7, go to control panel, click programs and features. Scroll down to MediaGet2, and then uninstall it.

  If these methods do not contribute to uninstall MediaGet2, you can download a 3rd party software program and then remove MediaGet2.

  I hope this helps.

  Marilyn

• Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.

  Blue "C0000142 dll initiallization failed" error message - windows vista on the computer laptop inspiron 1525 Dell.  I tried all system tools and I get nothing and the only point of system restore in the restore SP1 update. not the best at the command line and even worse to system32 please help I need the laptop in return

  Hello

  1. when exactly you get this error message?

  2 are you able to boot into the office after getting this error on blue screen?

  3. don't you make changes to the computer until the problem occurred?

  I suggest you to follow the steps below and check if it helps.

  Method 1: Try to start your system in safe mode and check if the same problem occurs.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Method 2 : If the question does not exist in Mode safe mode then try to put your computer in a clean boot state.

  By setting your boot system minimum state helps determine if third-party applications or startup items are causing the problem.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After the boot minimum troubleshooting step, follow step 7 in the link provided to return the computer to a Normal startup mode.

  Method 3: If the problem persists, then try to run the Startup Repair tool.

  Startup Repair is a Windows Vista recovery tool that can fix certain problems, such as system files missing or damaged that may prevent Windows from starting correctly. When you run the Startup Repair, it scans your computer for the problem and then tries to fix it so that your computer can start correctly.

  Startup Repair: http://windows.microsoft.com/en-US/windows-vista/Startup-Repair-frequently-asked-questions

  Hope this information is useful.

• No option has worked at the start of vista & no CD provided with the computer!

  I tried all the options (boot recovery, System Restore, memory something or other, etc) and nothing won't boot up to vista. It puts me in a vicious cycle of hit ctrl alt + delete to restart again and again. I have tried absolutely every single option. I can get the bios of course but that's all. I don't see anything else. I have no Vista CD because I bought the computer from comp usa so I can't even try to start with a CD. I want to do a clean install, but I guess that's not possible with no CD :-(  I just need to crash the computer in the trash?  I am disabled so I have no money for a new CD of windows, they are simply too expensive.

  Thank you

  Tammie

  Vista Media recovery obtaining and/or using the Vista recovery on your computer Partition to factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• Logitech software unifyier do not see a receiver is connected and so I can't pair the keyboard and mouse to the computer.

  I bought a logitech keyboard and mouse.

  I contacted support and they work in another machine (vista), they say, that there is an error on this machine.
  When the connection to the wireless receiver, it shows and installs in windows 7 64 bit home edition premium, however, unifyier of logitech software can not see a receiver is connected and so I cant pair the keyboard and mouse to the computer.
  I've tried different usb, front and rear ports and USB 2.0 and 3.0, but there is no change.
  Any ideas how to get this to work on windows 7 that I checked and the devices are compatible with my version of windows
   
  Original title: keyboard and wireless mouse

  I suggest to download and install the Logitech Unifying software and restart the computer and check if it makes a difference. Logitech Unifying software lets you manage your devices that use a Unifying receiver. You can add or remove devices using Wizard of the software or to use advanced mode. The Advanced mode also displays the status of your paired devices, version of the firmware and battery level.

  http://www.Logitech.com/en-us/support/Unifying?section=downloads&bit=32&OSID=14&file=http%3A%2F%2Fwww.Logitech.com%2Fpub%2Fcontroldevices%2Funifying%2Funifying210.exe

  See also: http://logitech-en-amr.custhelp.com/app/answers/detail/a_id/38032/session/L3RpbWUvMTM3NTkyODY1Ni9zaWQvQ1g2bDJkeGw%3D

• The browser does not start after you have turned off and turned on the computer

  The browser does not start after you have turned off and turned on the computer. I tried to remove the program entirely (as well as personal preferences), to create a new account, install a different browser versions. All this has not helped. (I have Windows 7). Help, please! Every day I have to reinstall Firefox!

  Hello Nastena, try a clean reinstall, some Firefox issues can be resolved by performing a clean reinstall. This means that you Remove Firefox program files and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
  2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  Please report back to see if this helped you!

  • Also check if your antivirus or other access security software (firewall, antispyware etc.) blocks firefox.

  Thank you

• RAM INSTALLED BUT NOT START THE COMPUTER

  MR. PRESIDENT IS RESPECTED,

  I HAVE G6-2312AX HP PAVILION NOTEBOOK COMPUTER. WINDOWS 8 IS INSTALLED IN. 4 GB OF RAM ALREADY THERE. NOW, I WANT TO ADD 4 GB MORE. I BOUGHT 4 GB OF RAM DDR3 1600 MHZ AND TRIED TO INSTALL IT. BUT THE COMPUTER DOES NOT. KINDLY TELL WHAT TO DO. JAI HIND

  It seems that if you did not put in a pair of identical bars or has not used the memry guaranteed compatible modules. You cannot use the module that was already there, unless you add is identical in every respect.

  Use only guarantee modules in identical pairs if you want your upgrade memory to work right the first time.