The hard drive has a separate guarantee?

Similar Questions

• MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

  MacBook pro work leave because of pulled and broken wire.  I took out the hard drive.  the hard drive has all my files that I wouldn't need to clear all of the other personal files?

  It does not start to the top, screen and hardware ok except belt disconnected.

  also can I sell adapter, brand new, never used. where can I sell?

  Hi Wally, the hard disk OS X and all of your files. Get a case for your reader, and it backs up. Try OWC

  Always keep your Mac backed up on an external drive with Time Machine or utility of cloning like SuperDuperor double clone.

  Try eBay for the adapter.

• How to read the Notes of Apple recovered from the HARD drive has crashed

  I tried to use DiskWarrior 5 to repair the hard drive that crashed on the previous laptop I was using (Macbook Pro mid-2010 7.1) last year.  I was running OS X 10.9 Mavericks for sure, and I'm almost certain that I had updated to OS X 10.10 Yosemite at the time where the hard drive crashed.  DiskWarrior does not completely fixing the reader, but I was able to recover most of the important files that I needed back.

  The only thing that I still have to get back that I really wanted were my Notes of Apple (not sticky).  I could save a few files com.apple.Notes with these files:

  NotesV1.storedata

  NotesV1.storedata - wal

  NotesV1.storedata - shm

  I tried to add the .html extension and open it in TextEdit, and Safari, and I see a lot of code, but none of my actual notes.  I noticed at the top of the NotesV1.storedata file, it says: SQLite 3 format, which leads me to believe that SQLite might serve to open/decode what I so that I can actually read.  I don't know anything about SQLite except that it can be opened and used in the Terminal, and it is already installed by default on my current computer which is a Macbook Pro mid-2012 (9.1).

  Here's a sample of what I see if it helps.

  

  Someone who knows what I'm doing and who also knows what they are doing can give me instructions step by step on how I can open these files with SQLite in the terminal, or decode, or something.  And no, unfortunately I do not have a back-up hard drive anywhere, and I was using iCloud in time.

  SQLite is a database format.

  Your Mac must have an integrated tool to read these files, it's a Terminal command that has this manual...

  https://developer.Apple.com/library/Mac/documentation/Darwin/reference/ManPages/ man1/sqlite3.1.html

  If it's too hard, you can try an app like...

  https://www.sqlitepro.com/

  .. .or one of the many that are discussed at...

  http://StackOverflow.com/questions/100959/Mac-SQLite-Editor

  You must open the "NotesV1.storedata", you may have to search in different tables to find relevant data, the data will be broken so that the pieces are unique, it is usually how are structured databases, if you need everything intact (as dates change etc) you need to perform queries to retrieve relevant items. Otherwise, you can export in CSV or other formats via this application.

  I recommend you change the original & working on a copy, just in case you save the changes.

  I don't think that this database is encrypted, but it is possible so post back if all of this sounds like gibberish. Also keep in mind that the data should not have images or other multimedia files that can be put in place, sometimes they are kept in databases as files.

  Another option is to find the location that the Notes.app stores these databases in your user account, you may be able to place these copies & get the app to read. Ideally, you would have a similar version of the operating system installed to do this.

• Windows Update does not work after the hard drive has been replaced

  Hello
  I have the same problem, replaced in my Toshiba HD, rebuild from Sysimage, Windows Update does not work. A ran "fix the problem with the Microsoft Windows Update is not working.
  Problem still exist.
  The message that I got while trying to update: "Windows Update cannot currently check updates,
  because the service is not running. "You may need to restart you computer.
  Stop and then restart the service, still no luck.

  I ran Windows troubleshooting. He finds two problems with Windows Update components, it corrects.
  The problem still exists.

  The other post:

  Another interesting fact:
  After the reconstruction the new disk, user account control does not recognize Windows programs.
  for example: execution of Perfmon.exe, the Publisher is unknown! However, when I download the program Windows FixIt, Publisher is recognized as Microsoft Windows. It seems that user account control does not recognize the Windows programs that had found the new HD, but acknowledges those who is downloaded from the internet.
  I guess there is a problem with the license, Windows was preinstalled on the Toshiba and replace the hard drive could have caused a few conflicts of licensing.

  Separated from the:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update/Windows-Update-not-working-after-hard-drive/77ab54ca-34b0-49DF-a268-bd07db68d887

  The same problem. Cloned old HD on a larger hard drive. Everything worked perfectly except NO indexing and update WITHOUT windows - the two recurring problems that seem to appear on the forums after a change of hard disk.

  INDEXING resolved with change to "Intel rapid storage technology." Google what I put in quotes, choose the Download Center and get the specific to your OP and the controller software.

  UPDATES have been a little more frustrating. The microsoft .fixes and convenience stores were without help.

  Go to control panel / system and Maintenance / administration tools

  Select Services

  Stop the Background Intelligent Transfer Service

  Stop Windows Update

  In 'My Computer' go to Windows / Software Distribution

  Right-click "DataStore" folder. Rename it to Datastore.old

  Rename the folder 'Download' Download.old

  Return to Services and restart the Background Intelligent Transfer Service and Windows Update.

  Look for the updates. It will take some time because you deleted the database.

  I hope this helps!

• Computer lockout windows laptop 7 - can't access bios or change start-up. Even change the hard drive has failed

  HELP! @ I got locked out of my laptop with a password that appears immediately at startup.   nothing works to get around,

  cannot enter bios setup or change your startup.  3 tries, then "System Halt" appears.   I even tried to change the hard drive to reformat

  He and restore again.  No change.  It must be a bios password that I never have.  Any ideas how to get control of my back to laptop?

  Moved to Virus and malicious software Forums.

  Hello

  For problems of BIOS passwords, you will need to contact the manufacturer of your laptop.

  We can not help you because of Microsoft's policy.

  Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.

  Here's information from Microsoft, explaining that the policy:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-security/keeping-passwords-secure-Microsoft-policy-on/39f56ef0-5d68-41AD-9daa-6e6019c25d37

  See you soon.

• I have a computer laptop envy m7-k111dx and the hard drive has gone bad

  I have a computer laptop envy m7-k111dx and the hard drive went bad and want to order a HP recovery disc through the website to order it is to take me through circles

  Please use the support of HP recovery, you created earlier to return the computer to a factory State. If you create your HP recovery media when you first set up your computer, please contact the official support of HP in your region / country, via the HP portal to support all over the world, to see if the HP recovery support is available for your computer.

  If you have any other questions, feel free to ask.

  Please click the 'Thumbs Up' white LAURELS to show your appreciation

• the hard drive has been replaced in the Tower from my computer and now I need re - install windows vista but have no disk

  hard drive went bad in my computer hp and was replaced, I can't find the disk came with it or restore disks, I'm not sure I ever had any, is a model of Tower not laptop I need to know if there is a way to download a copy for my computer on a drive of my laptop or what should I do?

  Hello

  There is no download available on the Net and your hard drive as failed now, you are unable to make the recovery of the disks.

  And you cannot use from recovery disks of a different brand or model (laptop) to reinstall Vista on your Tower / Desktop

  Contact HP and ask them to send you a set of recovery disks.

  http://WWW8.HP.com/us/en/contact-HP/contact.html

  "How to replace Microsoft software or hardware, order service packs and replace product manuals.

  http://support.Microsoft.com/kb/326246

  See you soon.

• failed to reinstall Vista, the capacity of the hard drive has disappeared

  I have a HP Pavillion desktop computer. Recently, my PC went crazy, I think he might have a virus or something. I forgot to renew my anti-virus software. I have at least 2 problems that left me mouth gaping. I uninstalled Vista, I tried to reinstall from my recovery disc, the re-installation always hangs up after that both CD is installed, after the CD is ejected last PC will try to start but the result is a blue screen I can't remove by pressing Ctrl-Alt-Delete. When the blue screen is gone, the PC is running at a slower pace. The PC is equipped with a 500 GB hard drive. Another problem is that the 'C' drive indicates 48.8 GB size and drive "D" indicates 9,76 GB. I don't know what happened to nearly 450 GB of space which should be in the C drive. Someone knows something like that? Thank you

  http://h10025.www1.HP.com/ewfrf/wc/contacthp?LC=en&DLC=en&cc=au

  Problem with the HP recovery process, you will need to contact them.

  The recovery process is supposed to consider return to how you bought.

  But it is Recovery HP process, not Microsoft.

  See you soon.

  Mick Murphy - Microsoft partner

• Try re-installing CS5 on computer once the hard drive has been wiped.  Help, please!

  Hello!  I am installing CS5 (which I already bought).  I have all the files right by the help of the Adobe customer service, but I am trying to install on my Macbook, I receive an error message that says: 'Install' is on the image disk 'DesignStandard_CS5_LS1.dmg '.  Google Chrome downloaded this disk image today at (time) of trials3.adobe.com.  Help, please!

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but these two links will help with older programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  FAQ on the Mac 10-11 https://forums.adobe.com/thread/1979303

  He has problems with Mac 10.11 El Capitan... which is perhaps one of them

  -Java https://helpx.adobe.com/dreamweaver/kb/dreamweaver-java-se-6-runtime.html

  -See answer #5 in https://forums.adobe.com/thread/1965850 for several solution links

• Toshiba dynadock can't connect to XPS L702X Windows 7 once the hard drive has been replaced.

  I tried the two installation from cd & install updated drivers from the Web site.  According to the documentation Dynadock Miss: Displaylink USB Gigabit network which I've tried to install the Displaylink but can't find it under network adapters.  I'm also missing Displaylink USB audio adapter, adapter, Displaylink (4305) & Dynadock U 3.0 under USB graphics cards.

  any advice or assistance would be appreciated

  Hello

  Thanks for posting in the Microsoft Community.

  I understand your concern about access to the devices connected via the USB ports. We will help you with this problem.

  Few try the TROUBLESHOOTING steps below and check if this may help.

  Step 1: I suggest you to run the hardware and devices troubleshooter.

  Hardware and peripheral troubleshooting check the common problems and ensures that a new device or connected to your PC hardware is correctly installed.

  Reference: Open the hardware and devices Troubleshooter

  Step 2: I suggest an run Network Adapter troubleshooter

  Troubleshooting of network card find and fix problems with the wireless network card and others.

  Reference: using the troubleshooter from network in Windows 7

  It will be useful. Get back to us with an up-to-date this issue report for assistance.

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.

• Satellite Pro A110 - in BIOS exclamation Point in front of the HARD drive

  Satellite A110 Pro PSAB1C-GM80XE

  Question is this. SATA CONTROLLER TOAST the laptop?

  Story.

  It seems as if the laptop hard drive has failed.
  Prior to the laptop, it would get BSOD.
  It would, however, go back to windows XP.

  After that, sometimes it wouldn't restart, he would try to boot from lan as if there is no hard drives.
  I check the bios.

  There is a! in front of the model of the drive. I can't change it, reset default does not change.
  No update of the bios was already made.
  Page drivers laptop says I have to install the update to the bios from windows xp... I can't do it of course.

  I bought a new hard drive for the laptop. WD Scorpio Blue (pretty standard) 160Gig

  The laptop recognize model to drive hard in the bios, but once again with the exclamation point in front of the name of the template.

  BIOS can see, but nothing else. No windows CD is able to watch the HD.

  Once again, it is the sata controller or can someone point me to an update of the bios I can do with a USB key.
  Should I just throw the laptop in the trash? I expect to give it a new life with a new hard drive and own bones.

  Hello

  What is the BSOD STOP Code?

  If 0x0000007B, it means that Windows cannot find a SATA driver for the SATA controller. To solve this BSOD, set the SATA Mode in the BIOS in "COMPATIBILITY" mode, or use a USB floppy with the SATA driver on this subject during the installation of Windows. Press F6 when you are prompted to install a 3rd party storage driver.

  Or otherwise, to use the original Toshiba Recovery disk to install Windows.

  I do not mean the exclamation point in the BIOS that the HARD drive is faulty, it means that the HARD drive has the highest priority boot on my laptop.

• Tecra A6 - how to remove the HARD drive password

  I am repairing a laptop Tecra A6 for one of my clients.
  For the first time, I fixed it for him, the hard drive was blocked from password and I had to reformat using an online service.

  This time, when I took my customer's computer everything he had put on his computer was the fingerscroll / password to connect to the account, there was no protection of password on hard disc tray.
  I brought it back to the shop, she booted up and immediately, I wonder a password to unlock the drive.
  Somehow, the hard drive has developed a password.

  (1) is there a possible problem with the hard drive?
  (2) at - it a solution without having to wipe the hard drive
  (3) Toshiba has tools or the default password that would unlock it

  The hard drive is a Toshiba MK6034GSX 80 GB.

  Any help please?

  Hello

  The HARD drive password can be removed ONLY if the old password would be known to you.
  If the HARD drive password is not known to you then you will not be able to delete
  In this case, the HARD drive is blocked and is no longer usable.

  Here's a little description:
  http://APS2.toshiba-tro.de/KB0/FAQ9202JG0000R01.htm

  Welcome them

• Satellite A210 - 1 4 - using Recovery DVD after replacing the hard drive

  My laptops hard drive failed last year and had to be replaced. Vista was installed by the repairman.
  However, now I want to restore the system failing.

  Will be my Toshiba Recovery Disc I received with my Word still PC although the hard drive is different? How will I know?

  Hello

  You can use the Toshiba Recovery disk, even if the HARD drive has been replaced.
  Usually it s no matter you use a new HARD drive...
  The recovery disk would be to format the drive HARD integer and must install the Toshiba image correctly.

  Welcome them

• Satellite A300-1mz I use the recovery disks after an upgrade of the HARD drive?

  I'm upgrading the disk hard of my * toshiba a300-1mz *, but I am sure that I can use the * recovery disks * marked the first boots to the l.o. (vista)

  I expect your support...
  Thank you very much...

  Hello

  Yes, you can do it!
  If the HARD drive has been recognized by the BIOS, then you should boot from the recovery disk Toshiba in order to reinstall the operating system which has been pre-installed by Toshiba.

  Welcome them