THE HP ELITEBOOK NOTEBOOK BIOS BOOT ORDER

Similar Questions

• HP 17.3 E0067cl UEFI BIOS. boot order fails.

  total of history: end-to-end.

  subject, the flash player. 23 to 32GB (mine is 32 Sandisk USB3, extreme, written 100 MB/s.

  will not work with rebecca, or (what we call it now)

  It won't work, create backup USB flash, "" create the recovery disk ".

  It just shows the "daisy" spinning throughout the day.  on a brand new laptop HP, 20 July 2014, new in box.

  I just ran sfc /scan now and spend.

  my best guess it that windows update to 8.0 (100) killed this "feature".

  or my 8.1 updated. (toss the coin)

  I ordered the new installation of HP for $18 disc...

  so bad to close this topic, with "operator error", never update then try running to build your own, backup media.

  RIP

  later...

  the second problem is that the bios does not allow. My next update.

  a new SSD.

  I got it to work.  but the BIOS does not see the two disks. ! (in bios boot order) UEFI.

  I solved this problem by removing the 2 left 1, the old HARD disk.

  now the SSDS works like the lighting and the BIOS, can be ignored.

  I used Acronis to make the all the steps above tib files and evolutions'm so good... and made and a huge external drive.

  problem solved.

  closed...

  This has something to do with what we were talking about earlier on recovery and flash player?

• In the BIOS boot order stopped showing my external DVD player

  I use a laptop HP Compaq presario V3000 series, model no. V3018TU. I use a DVD drive with her as my internal DVD player does not work properly.

  External DVD drive functions correctly after windows starts. The problem is that he displayed in the boot order. I want to install Ubuntu alongside with XP. I am not able to give priority to installing Ubuntu on boot as it is not showing in the boot order. After starting my laptop, it starts to load XP.

  That's what I was doing just before this problem arose. Everything was fine. I was installing Ubuntu along side Windows XP my laptop and in-between the installation got stuck and my hard drive was not working when I rebooted, I made my hard drive to work somehow and then I found another problem, i.e.my external DVD drive is not showing in the boot order. All the other things i.e.my hard drive, internal DVD player (does not work correctly) etc., appear but except for my external DVD player. I need my external DVD player to display in the boot order to install ubuntu.

  Help me fix the problem. Thanks in advance.

  @Dinesh

  Here you go...

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=3195407&prodTypeId=321957&prodSeriesId=1817055&swLang=8&TaskID=135&swEnvOID=228

• In new style bios boot order

  I have a new laptop Win 8 HP4540s that totally confuses me when I try to create a boot order that will allow (in order) optical drive DVD, USB drive, on Board HDD.

  First of all, I did a lot of changes to BIOS, I can't think of a return to the default settings would be a desirable course point - please help.

  Then, perhaps offer advice how to achieve my goals.

  At present, the cell F9 boot order is:

  OS boot manager

  Laptop Ethernet IPV4

  Laptop Ethernet IPv6

  Boot to the EFI file

  Left alone, the system starts the Win8 operating system

  Why boot from DVD or USB memory stick, we use the Acronis boot disk (or USB drive to memory to create a full image of HARD drive for security purposes.)

  I wish I had a technical paper on the BIOS settings

  Hello

  There is not a perfect solution yet but I'm hoping that HP creates one for your situation.

• I can't make any changes on the WOOD of Lenovo E530C boot order.

  I have this laptop here as I want to get off the machine, I can not set the boot order.
  I can't get into the BIOS but I can't make any changes in the boot order, upgrading the BIOS is the current.

  How can I solve the problem? Please help.

  Hi Mehlo,

  Thanks for posting your query on the Microsoft Community.

  I'm sorry to inform you that you are not the right forum to get answer to your query. That you are facing problem with set BIOS settings that require a specialist equipment or their technical support technicians. Here are a few discussions with the manufacturer of your computer that deals with the same issue that challenge you. Please check and see if it helps.

  Change the boot order in the BIOS

  ThinkPad E530 will not boot from the CD

  If the problem persists, try to contact your computer support center and see what they suggest. To contact the Lenovo Support, you can consult this link.

  Hope that the information provided is useful. Let us know if you have any concerns related to Windows. We will be more than happy to help you.

  Kind regards

• How to reset the HP Elitebook 8440p bios admin password

  I bought this used and update the bios. It doesn't let me do unless I give him the admin password. How to remove the password?

  SOLUTION: This is what I did and worked like a dream. Contacted HP, told them the problem. They "rise of the case," took my info. The next day, I sent a file called SMC.bin. It is formatted specifically for my machine to match the UUID. A file copied to FAT 32 format USB key, started in accordance with the instructions of e-mail, password bios reset.

  I did it via the cat on the HP website.

  Screw with the bios battery will not work on Elitebook...

• The virtual computer's BIOS boot menu +.

  Hello

  At the start of my virtual machine, I pressed the ESC key and open the start menu:

  1 + removable devices

  2 + hard drive

  3. CD-ROM drive

  4. network boot

  Why 1. and 2. I sing anymore? It is that that means that 1. and 2. have sub-menus?

  The + sign indicates sub entries. If you go into the BIOS, you can see what they are.

  Here is an example.

  

• Satellite R630-141 - cannot change the boot order

  I have a Toshiba R630-141 and I'm changing the boot order in the Bios, but the Bios does not allow me to choose my cd drive or a USB drive as the startup disk.

  I've updated the Bios today to the latest version, thinking that I need the latest version but still the Bios allows me to change the order.

  The problem is the screen flashes only when I'm in the form of change of boot order. When I select the upper and down arrows to select an option in the box just blinks and does not allow me to select any option.

  I tried the tab key, the number keys basically all of the keys that I on the keyboard, and still, I can't select usb or cd drive so I have to quit and restart.

  Any ideas would be appreciated.

  Hi scarpentier,

  You can change the boot order in the BIOS and booting from another boot device? Go into the BIOS and change the boot order. Enter a startup disk (e. g. Toshiba recovery disc), save & exit the BIOS Setup. The computer will restart and should boot from the CD.

  Check this box!

• Re: Satellite A210-10 has, crashes when you change the boot order

  Hello

  I have a serious problem with my computer Toshiba laptop, Windows Vista 32-bit, clocked at 1.8 Ghz, 2 GB RAM, AMD Turion 64 x 2
  There is only a single disk partitioned into two drives of 75 GB (C and E).

  The problem is that whenever I enter the start menu (for boot from CD), or if I change in the BIOS boot order and restart, the computer hangs (power cut off suddenly).
  So the only way to recover, is to connect the AC/DC adapter, wait 5 minutes and repeat. Then, everything lights up normally or launches of Windows system recovery, after what he will restart and work very well.

  It would be important to know that I partitioned the drive to have 30 GB for installing Win7 later. The problem is that I've never tried to change the boot order before repartitioning, so I don't know if it has something to do with the problem or if it was there before.

  Any help or suggestion would be appreciated.

  Thank you

  Post edited by: bambula

  Hello

  > The problem is that whenever I enter the start menu (for boot from CD), or if I change in the BIOS boot order and restart, the computer hangs (power cut off suddenly).

  It seems that the issue related to the Bios. Have you tried to put update or reflash?

  > The problem is that I've never tried to change the boot order before repartitioning, so I don't know if it has something to do with the problem or if it was there before.

  Maybe this has happened before, but you don't check.

• Using SetConfig.vbs on T500\T510\T520 change boot order?

  Everyone on a T500\t510\T520 BIOS boot order successfully changed using the (SetConfig.vbs) utility of Lenovo WMI Bios?  Whenever I try to change the bios boot order by using this utility, I get the error, "invalid parameter."

  Parameter variables are: SetConfig.vbs [Setting] [value]

  I changed other settings successfully, but I can get it to work.

  Current BOOTORDER by using "ListAll.vbs".

  BootOrder = HDD0:USBFDD:ATAPICD0:USBCDCILAN:USBHDD:HDD1

  Command I use on a T500 is: SetConfig.vbs BOOTORDER USBFDD:HDD0:ATAPICD0:USBCDCILAN:USBHDD:HDD1

  I'm just this test of an operating system running to possibly use in SCCM OSD task sequence.

  There is no BIOS password.

  Any ideas?  I get the same error on all 3 models listed above and I'm using the latest version of the WMI utility.

  Thank you

  thebearpoo

  Correct command is BootOrder and not BOOTORDER.

  Solved.

• Change boot order in esxi 5.1

  Hi, I use successfully the following code to change the boot order as described in the 1707558 message () Re: change with PowerCLI boot order

  Unfortunaly, it does not work in esxi 5.1, the powercli returns without error, but does not update the boot order. I have try the hard drive, cdrom and I have the same symptom.

  As any person able to do in version 5.1?

  Kind regards.

  $spec = New-Object VMware.Vim.VirtualMachineConfigSpec

  $spec.extraConfig += New-Object VMware.Vim.OptionValue

  $spec.extraConfig .key [0] = 'bios.bootOrder'

  $spec.extraConfig [0] .value = "ethernet0"

  (Get-View ()Get-VM -name < vmname >) USER.USER). ReconfigVM_Task ($spec( )

  
  

  
  

  Hello, thierry_ma-

  Here, it is another way.  We wrote on this topic to vNugglets.com some time in the post of the change via PowerShell VM boot order .  I just checked that this method always works against a v5.1 environment.  You might have a look at this post.

  And, as noted at the bottom of this post, the virtual computer startup order in this way script setting seems to make such that that particular boot order VM may only be changed be script later.  So something to consider.

  In any case - how does do for you?

• sk781uc: HP EliteBook Notebook PC - Maintenance and Service of Guide 2540p

  I'm looking for a copy of the HP EliteBook Notebook PC - Maintenance and Service of Guide 2540p , now it's this url, two months ago, he went to: http://h20628.www2.hp.com/km-ext/kmcsdirect/emr_na-c02664684-1.pdf

  Hi @Cyber_Master_G,

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! Try this link.

  You can say thanks for trying to help, by clicking on the Thumbs Up below! .

  Thank you.

• Elite 8000 LTS: can ' t get into the BIOS to change the boot order

  I want to change the boot order to allow booting from the ISO disks.

  Keyboard F10 doesn't bring up the BIOS screen, and the machine starts just in Win7.

  Any suggestions?

  Thank you

  What works is by exchanging the mouse and keyboard usb for mouse and existing keyboars.

  Looks like that the installation of Win 7 bothered recognition of USB designs.

• Re: Satellite Pro A40 - cannot find the boot order in the BIOS

  Hi, we have a very old A40 Satellite Pro with a new hard drive.

  We are tryng to change the boot order in the BIOS to recognize the CD player ready for the windows disk. However, there seems to be no option to change the BIOS not boot order, and Yes, we tried the road from Toshiba which suggests press C during startup until and F12 to select the drive during boot, or what kind of work.

  Please can someone help?
  concerning
  Karl

  PS: The current message on the screen during startup is THAT BOOTMGR is missing

  Hi karl1966,

  Have you checked if the CD/DVD drive is recognized correctly in the BIOS?

  Maybe your drive is noisy and you should try another. I put t disc you used but try with Toshiba and Microsoft Windows disk recovery disk.

• Satellite C850 - how to change the boot order in the BIOS?

  Hi guys,.

  I just bought a C850, and KIS2013 has made a recovery on a USB facility. But how do the machine to boot from the stylus, I can't find any way to get into the bios to change the boot order. I have been Googling all day and tried all methods I found recommended, non of which worked.

  Thanks in anticipation,

  Ray

  Proceed to a complete stop and after starting your laptop press F12 again to enter the BOOT menu.
  http://APS2.toshiba-tro.de/KB0/TSB2B03EY0002R01.htm

  You will find the possibility to enter the BIOS settings.