The ID of the email group

Similar Questions

• Customization of the emailing of the alerts based on a specific group of servers?

  Hello

  I'm wondering how to set up electronic mail based on a specific service of Foglight? For example, I know that I can put "SYSADMIN" to an e-mail address and it becomes the email address golbal all alerts are sent to.

  What I want to do, is keep global electronic mail as address, but take a few exclusions and have another set of servers to a diffferent e-mail address e-mail.

  In this example I am using services that I created my groupings. For example, I have a FSM Service called "DHCP servers" I want alll alerts for servers in this group to go to another email address that defined globally in the sysadmin variable e-mail address.

  Here's what I've tried, but alerts are not sent to "[email protected]".

  

  How to achieve this?

  Thank you

  Tony

  Hello Tony

  This can be done with a service (as far as I know), but my requirements were much simpler.  I had three machines CRM and CRM team wanted to know when CRM Windows services had problems.

  At the end of the day, I used two - general rule of 'The host Services' and a specific rule of 'Hosting CRM Services' rules.

  My "Host Services CRM" rule has the following in the rule definition:

  HostService where monitoredHost.name = "crm1.mycompany.com" or monitoredHost.name = "crmapp01.mycompany.com" or monitoredHost.name = "crmapp02.mycompany.com".

  There is a variable in the Conditions tab, alarms & Actions for registry ("NewAddress").  In the registry, "NewAddress" is essentially "SYSADMIN" from the e-mail address for the CRM team.

  To avoid duplicate emails, 'Host Services' rule has the following in the definition of the rule to exclude CRM systems:

  HostService where monitoredHost.name! = "crm1.mycompany.com" and monitoredHost.name! = "crmapp01.mycompany.com" and monitoredHost.name! = "crmapp02.mycompany.com".

  I'm sure (but does not ) that you can change monitoredHost.name to something like service. Name it extended to a service.  Obviously, it would be preferable to application domain service so that you don't have that one place to update unlike me, but my customizations refer only to three systems with two rules, so it's easy to keep up-to-date.

  I hope this helps for you an overview on how to attempt it.

  Brian

• How to send an email to the entire group

  Original title: sending a group e-mail

  I created a group in my contacts, but don't know how to send an email to the entire group.   When I type in the name of Group 5 of the 25 show upward.   I'm doing something wrong.

  You will need to provide much more information.  For example, what email program are you using?  Is it perhaps Windows Live Mail 2012?

• What is the best option to get Email group subscription to CRM Contacts (in time real/as it changes)

  Hello world

  I evaluate me and come up with approaches multiples, but want to ask everybody, what is the best and easiest method to get subscriptions to e-mail to CRM Group since they change, virtually in real time in CRM (SFDC or other).

  I understand internal call/event allows only the global subscription status be synchronized with CRM, my problem is subscription group.

  Would love to hear all of the approaches.

  Thank you

  Amit Pandya

  Hi Amit,

  Others may have another alternative, but what I've done in the past is to create a "Subscriptions" Eloqua field both SFDC and make a multiple selection with the same values as the E-mail groups in Eloqua. Then, when a person subscribes to some groups of Email, in addition to the update of their Email Group subscriptions, I also update the values in the field 'Subscriptions' and then add in the update CRM program so that subscriptions are updated in the master record or Contact SFDC.

  I work with a client who succeeded subscriptions on the side SFDC in an object custom. It's doable as well, but it is a bit tricky when people of the Nations United-subscription of a group. We ended up creating a record for every email of the contact group to subscribe on a custom object with the name of Group of e-mail and a value of 'Yes' in a field called "Customer", and then if the contact came back and unsubscribed from a group they have already subscribed to, we updated account of this group of e-mail on the custom with a value of 'No' object in the field 'Subscriber '. A little more complicated and more difficult to manage and maintain, but it allows more coverage as you can tell for each group of Email when someone is first of all a (rather than having a single field of "Subscriptions" in the main folder or Contact which houses all subscriptions).

  Hope that helps!

  Kim

• TB filters seem to be applied to all THE emails coming in the opposite direction.

  I can simply not TB to work reliably message filtering system.
  I have to do something wrong.

  There are a few interest groups with which I agree. They send lists.
  Some people are, for example, on yahoogroups. Yahoogroups has a custom header that is "List-ID:
  Sometimes this List-ID works sometimes not.

  I also try to use Return-Path, respond to, to, cc,... sometimes I tried partial subject lines matching: contains [CatsNDogs] for example.
  So I want to each incoming message to go in one folder that represents his 'list'... the list of cat, the dog, the list of fishing and so on.

  Then, after all those who are tested, "you are in the chat list?", then you are in the list of dog... There you are my AB staff of friends (then delete it in 'Mine'.

  The rest fall into the unknown.

  What I get is irregular. I get email fell in 'Mine' because the 'From' IS a guy I know. BUT the List-ID indicated it was an email from the LIST. The return address IS only yahoogroups email address LIST.

  For each LIST, I selects only the header lines containing the corresponding email list address.
  The email has been selected. Must have.
  How the filtering system can ignore the header selected?

  I even learned down to partial words to make it simple for a lethargic program to find the cat in CatsNDog.
  I tried Stop-filter-performance (have FiltaQuilla as an add-on).

  And yet, I find myself with dozens of real Email list in my personal inbox.

  And this error/bug persists Earlybird and several versions of thunderbird.
  I tell myself that I do not have the filters properly.

  A typical example of the 20 others:
  To or cc contains Meow copy cats on local folders

  It works for some and fail for a dozen, there is absolutely no pattern as to why it fails.

  Filter logs show that TB seems to apply all filters to each new email.

  Is this possible?

  As you have identified each mail is tested against each filter. any filter is the mail first then he will be treated by the latter, your action is movement, then the following filter will not run against her because she is no longer in the folder. The filters are executed in the order that they are in the list of filters,
  9nence the move up and move to the bottom of the dialog box options

• Why only a Yahoo Group displays the column group name?

  I belong to several Yahoo groups and get individual emails from 3 of them. They all worked well until May 8, 2014, when the Freex news group began to display only "[email protected]" in the column. It's always like that. I can't be sure it's a Yahoo problem, like the other groups I am a member of display the senders display name and e-mail address.
  The attachment is a snip of the CT showing how it was and how it has changed.
  Please tell us how to get back to the display names and addresses.

  locate this address in your address book, and then delete.

• I don't want spam to be collected in conversations, I always want to see all the emails sorted by date

  Whenever I answered an email, emails with the same subject are grouped into conversations. To search for a specific post, it's too easy to forget the mail that it could be hidden in a conversation. Can I get rid of chat and just look at all the emails they get?

  The menu bar, select View-sort by Unthreaded

  No bar menu with view? Press the alt key to make it appear.

• I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list.

  I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list. MBP OS 10.11.4

  Open the "sent" folder on the account that you mailed to and look at the message that you sent it to see.

  You have email of the accident to a group? You have a group created in the application of Contact with these names? Or maybe that you click on reply to all to create the message?

• Multiple problems (unable to see the focus groups etc.)

  For a while now, well, several versions, I had problems with Skype works correctly.

  When I see groups of discussion, it says "Untitled Discussion" with 0 participants, but sometimes we are able to talk through even if it is said that to me. Sometimes if the group already exists, I am unable to join the voice, I have to be already on appeal with the person who hosts the discussion group to make it work.

  Message also seem to take up to 30 minutes to send (normal text chat).

  I can't see also photos that people send me on Skype... I have to go to the web version on my email to be able to see the pictures.

  I tried several solutions already to try to solve the problem, but nothing has worked. I tried to update, but he was already at the latest version. I tried a reinstall. I tried to go back to some older versions, but the problems remain. I tried to uninstall - delete the temporary resettlement, but it did not work. Currently, even after uninstalling and installing one of future versions of version 6 of Skype hoping it becomes usable.

  Internet and computer must be able to run it without problems too.

  65/10 with usually around 14 internet ping.

  Win 10 Pro x 64

  i5 4690 k @ 4.6 GHz

  NVIDIA GTX 960 4 GB

  32 GB OF RAM

  Thanks to one that has a solution for this.

  Well, it seems that I could solve the problem.

  There is not any messages telling me that the SKYPE account has been locked, while Microsoft, it was not. They wanted me to change the password for some reason any, while they were locked. Since the account Skype has been locked the account Microsoft, things like who was online and worked this kind of things, but I had trouble sending messages etc. because the side inherited things Skype wasn't working.

  Change the password of Skype (which did change the password for microsoft at the same time) worked and I was able to send and receive calls and messages normally after that.

• Remove the entry of main contacts without even the removal of the contact group.

  I want to have the members of the group to NOT be in my regular contacts list. Although I used the "group only contact" - type option, it gives me 2 entries for the same person: one appears as the name, the other as email for the person (in the Group folder). If I delete my main contacts list entry, it is removed in the contact group. Help!

  • You use Windows Mail or any other email client?

  Check these to see if they contain measures: (Windows Mail)

  http://Windows.Microsoft.com/en-us/Windows-Vista/working-with-Windows-Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

• Is there a way to see all the emails today from my different e-mail accounts in Outlook?

  For example, I have more than 10 accounts e-mail, and instead of the Inbox, click display all the e-mail now and then by clicking Inbox for the following e-mail account, is there a way to see all emails today to all my e-mail accounts 10 +? And if the answer isn't in Outlook, could you tell me another application that could do it please? Thank you.

  Ask groups of Outlook
  http://answers.Microsoft.com/en-AU/Office/default.aspx#tab=3
   
  The integrated Vista Windows Mail program displays all accounts in one Inbox.
   
  --
  ..
  --
  "Kim2theKiko" wrote in message news: 65d412c9-e571-496e-9 d 72-278d0fb323c9...
  > For example, I have more of e-mail accounts 10 and instead of click
  > Inbox, view all the email today and then clicking Inbox for the next
  > e-mail account, is there a way to see all emails today to all my
  > 10 + e-mail accounts? And if the answer isn't in Outlook, could you tell me
  > another application that could do it please? Thank you.
  >
   
   

• How can I fix an error message telling me to an association in the control panel so I can get email brochures sent to me .___error message in the email

  I get an error message sent to me when I try to pull up different sent pamphlets the error indicates that this file does not have a program associated with it to perform this action, Create and association in the Panel of the Association.  I have not the slightest idea of what it means and its quite annoying can someone help me.

  What I had was the .doc extension.  Go to start / Default programs / associate a file or Protocol with a program / and find the .doc extension.  It is associated with a program that can open and read .doc files (such as MS Word or Word Viewer or write OpenOffie)?  If this isn't the case, you will need to install one of these programs to establish the association and allow you to read the prospectus.

  If you already have one of these programs and the association is already in this program (and you can open .doc files other ways except these brochures by email), then it may be something wrong with your email client or Microsoft Word program.  It is also possible, there is something wrong with the flyers - can you open other accessories .doc in your e-mail program?

  I can't refer you to help with the e-mail software because I don't know which you use; However, you may need to repost your question in the Discussion of the Office group at: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.word.docmanagement&lang=en&cr=US where issues of speech specialists will be more than happy to help you with your problem.

  If your e-mail client is Outlook, send to: http://www.microsoft.com/office/community/en-us/default.mspx?dg=microsoft.public.outlook.general&lang=en&cr=US where experts in Outlook will be more than happy to help you with your problem.

  I hope this helps.

  Good luck! Lorien - a - MCSE/MCSA/network + / A +.

• Cannot get Windows 7 homegroups to work properly. Double-click a shared library on another machine in the residential group doesn't.

  I just bought a new laptop with Windows 7 on it, so I decided to try the new homegroup in Windows 7 feature.  I activated the homegroup on my desk and apart from the music, photos and videos.  I then joined the residential group with the new portable computer using the password provided by the office shared libraries and the same 3 homegroup.  All appeard to put up correctly, but I can't browse libraries shared each machine to other machine.  I have the Homegroup and click on the other machine and I see 3 libraries, but when I click on any one of them does nothing.  This happens on both machines.   The only way I can get the residential groups to work is to first go to the other machine and provide credentials on the other machine.  After doing this, the homegroup files begin to work.  I was under the impression that the homegroup password was all I had to have access to all shared folders with the homegroup, but the only way I can get the homegroup to work is first authenticate itself to other machine using a user name and password.

  The two machines are configured with the following:

  • Network discovery is enabled
  • File sharing and printer is enabled
  • Public folder sharing is on
  • Streaming Media is on
  • File sharing connections is configured to use 128-bit encryption
  • Password protected sharing is on
  • Homegroup connections is set up to allow Windows to manage.

  I came across this forum because I had the same problem today. Real quickly, I have two laptops, one running windows 7 Home premium 32-bit and the other runs windows 7 Professional 32-bit. I have comcast for my internet provider and their cable modem attached to my belkin wireless router. I don't know if my fix will work for someone else, but it worked for me, so this is.

  1. unplug the router cable modem wireless
  2. connect the router to one of your computers using an ethernet cord
  3. open a web browser and type in the IP address of the router in the Web page bar (as when you type hotmail.com to go check your email). Mine is a belkin so 192.168.2.1 has worked for me.
  4. the control of the router page should open, and one of the options should be to reset factory settings, do this.
  5. DO NOT CONNECT THE ROUTER TO THE CABLE MODEM
  6 configure the router in the same way that you did when you first installed the router, but just to be sure, I used another name for the network
  7. Once you have the password set up and named network you can disconnect the ethernet cable.
  8. connect to the new network without wire of each computer (just like when you connect to a wireless network) choose House (rather than work or public) for the network location.
  9. at this stage my homegroup didn't work, if it is not there for you, you may need to set up the homegroup in Control Panel.
  10. once the residential group is working the way you want to connect the router wireless to the modem cable and check to see if your internet connection is working by opening a web browser and go to any old site
  Hope this helps!
  Cameron

• What are valid characters in an e-mail address? How to filter on the email addresses that use '? ' and ' * '?

  I'm doing some proactive cleaning the contacts whose e-mail address contains characters that are questionable - such as

  • Bob? @domain.com
  • ASDF***@example.com

  Unfortunately, I found that I can't create filters for addresses that contain? or * because these two characters are treated as wildcards (? is for a single wildcard character, and * is the joker of several characters).

  Someone at - it suggestions on how I can filter for a group of e-mail addresses containing one of these characters?

  Update: open a folder with support - special characters * and?  are not allowed in the domain of the email address part.  That's what is validated during creation.

  It is also not really any EASY way to get those email addresses that contain these characters - I can create filters that will shoot only so many email addresses and then filter through Excel.  This is going to be painful because I have several million in our database.  I may be able to get many of them through other criteria (lack of activity, rebounds, etc.), so I'll probably wait on them.

• You want to sort the columns by using the ROLLUP GROUP.

  Want to order the below query using "column of News in descending order and the"Email address"column in ascending order.
  Note: Triage should not bring the total value at the top. It's happening now.
  
  {code}
  SELECT decode (grouping (NVL (customer, "NA")), 1, 'total', NVL (customer, "NA")) 'Email (ID). "
  "Location."
  Sum (News) "News."
  Sum (website) "Web Site",
  OF VW_FX_USERDATA
  GROUP BY ROLLUP (((NVL (Client, "NA")), location, 1, 'total', NVL (customer, "NA")))
  {code}
  
  Please let me know if you need any details.
  
  Published by: Nana Akkivalli on September 23, 2011 16:04

  order by decode(decode(grouping(NVL(EMailAddress, 'NA')),1, 'Totals', NVL(EMailAddress, 'NA')), 'Totals',2,1), 3 desc, 1 asc