The image is a vector image. Values based on the low-resolution proxy RGB eyedropper

Similar Questions

• can not set the resolution of the screen because of the low resolution and can not click on apply

  When I turned on this morning all of the screens were above the waist.

  I tried to adjust the screen resolutions, but the apply button was below the bottom of the screen. All screens are above the waist

  Concerning

  Don

  When I turned on this morning all of the screens were above the waist.

  I tried to adjust the screen resolutions, but the apply button was below the bottom of the screen. All screens are above the waist

  Concerning

  Don

  Use the Enter key.

  It works the same apply and OK buttons.

• seems that I bought the wrong size stock photo because it shows the low resolution 20 x 30... How can I return it and get the right kind of photo?

  How can I return it and get the right size stock photo that actually works to post 20 x 30

  Hi Debbie,.

  Once that the photos were allowed, they cannot be removed or not allowed.

  Thus, you must make sure that the image you need for your projects. You can also check the size of the images before their approval.

  Hope that answers your question.

  ~ David

• workaround for the slowdown in performance and the low resolution of the RED R3D files after effects CC 2014 (13.0)

  ml http://blogs.adobe.com/AfterEffects/2014/06/Red-R3D-Problems-After-Effects-CC-2014-13-0.HT

  The After Effects team are investigating a bug in after effects CC 2104 (13.0) when RED (.) R3D files) are very slow and the resolution of the images is poor, all sampling of 1/8.

  
  

  The following workaround solution was reported to solve problems in some cases:

  1. Save the project.
  2. Choose Edition > purge > all memory and disk cache.

  
  

  Please post in this thread on whether or not this work around has helped you.

  Performance issues and resolution with the RED (.r3d) files have been fixed in the CC of effects after update to 2014.1.1 (13.1.1).

  Details: http://bit.ly/AE_1311_details

• Unable to use Microsoft Lifecam on Pic4pass because of the low resolution?

  I try to use my Lifecam ( Microsoft Lifecam Cinema HD ) on Pic4pass ( http://www.pic4pass.com/ ) but repeat me my webcam resolution is too low. I changed the resolution of the 600 s then 800 s and cannot go higher garbage laptop specs, and it still does not accept it.

  Help

  Unfortunately for you ensure that your photo meets government requirements that pic4pass requires a webcam with a minimum video resolution of 1600 x 1200 px.

  But you can also upload a photo from your digital camera or a mobile phone; almost all digital cameras have high enough resolution.

• The proxy editing low resolution, then apply changes to high resolution

  Hello

  I'm developing a continuous image of a great wall that will be seen about 1-2 feet of viewing distance. There are about 100 dpi.

  My image is currently 21 600 x 8100 pixels in 8-bit CMYK. It can grow. I don't do a lot of manipulation, but a lot of it is with the help of brushes and the smudge tool.

  2 questions:

  (1) I have a Mac Pro 12-core with 24 GB of RAM. The smudge tool is slooowly when working on this image (like a finger to the max brush size takes 15-20 seconds to enter into force).

  (2) is it a "string mesh" tool that I can use instead of the finger tool?

  Is it possible for me to edit a version low resolution of this image, then apply the changes that I made to the version high resolution? then I can use the tools anti-dirt and brush, and the finesse my work without the machine bogged down and Imaging will look correct. I'm looking for a way to use these tools in real time while working with this large image.

  This seems to be the solution (at least it is for me). I can apply my changes to the proxy low resolution by registering the mesh and then apply this same mesh to image high resolution. The brush sizes large (compared to the resolution of the image) that I am available in version low resolution are presented through the high resolution because the changes are not applied as strokes of brush, but as changes in the global network. changes made to the mesh are what is transferred when you export and import.

  Applying the mesh is pretty slow and it requires a bit of tinkering at the level high resolution, but makes me 95% of the way. I think that is achievable.

  To sum up - here are the steps:

  (1) I make a version low resolution of the image (like 1200px wide)

  (2) I make my changes to the image using fluidity

  (3) before committing the changes in fluidity, I have 'Save Mesh' in the Liquify tool

  (4) I opened my image in high resolution

  (5) I use liquify, but I do not use brushes, but rather load my saved the low-resolution mesh

  (6) profit.

  Thanks for the help of the people!

  --------------S

• script to save .pdf with different presets generates the file size low resolution wildly different interactive operation

  The script below is adapted in part from that has been with Illustrator and other pieces and the pieces that I picked up the Forum.  When I run it on a 15.3 Mg .ai file it produces

  . The same PFS size that would be the case if I manually created at Headquarters printing and by default; but the low-resolution sort option to 9 Mg as opposed to the 439 K he "should" be.

  Please someone be kind advise me how can I change the script to work as I want that: I had counted on my custom screening done the work for me.  Thank you in advance.

     var jiName=app.activeDocument.name
  
     var pos = jiName.indexOf(".ai"); 
        if (pos > 0){
            jiName=jiName.substr(0,(pos))  
        }
      var pos = jiName.indexOf(".pdf"); 
        if (pos > 0){
           jiName=jiName.substr(0,(pos)) 
        }
      
      var saveProof = new Window ("dialog", "Save Proof");
          saveProof.orientation="column"
          saveProof.alignChildren = "center";
          
    var sPGroup1 = saveProof.add ("group");
          sPGroup1.orientation="column"
          sPGroup1.add ("statictext", undefined, "File Name");
              
    var save_pdf = sPGroup1.add ('edittext {text:"", characters: 30, justify: "center", active: true}');
          save_pdf.text=jiName+".pdf"
          
    var sPdQButtonGroup = saveProof.add ("group");
          sPdQButtonGroup.alignment = "center"; 
          sPdQButtonGroup.alignChildren="row"
          sPdQButtonGroup.add ("statictext", undefined,"File Quality");
    var HQ=sPdQButtonGroup.add ("radiobutton", undefined, "  HI-RES  ");
    var IDefault=sPdQButtonGroup.add ("radiobutton", undefined, "  Standard  ");
    var lowres=sPdQButtonGroup.add ("radiobutton", undefined, "  low-res  ");
          sPdQButtonGroup.children[1].value = false;
          sPdQButtonGroup.children[3].value = false;
          sPdQButtonGroup.children[2].value = true;
          sPdQButtonGroup.active=true;
          sPdQButtonGroup.visible=true;
          
    var sPButtonGroup = saveProof.add ("group");
          sPButtonGroup.alignment = "center"; 
          sPButtonGroup.alignChildren="row"      
              
    var sPok=sPButtonGroup.add ("button", undefined, "Save Proof");
    var sPcancel=sPButtonGroup.add ("button", undefined, "Exit");
          sPButtonGroup.active = true;
             
          sPcancel.onClick = function() {
             //sP_ok=false;
             saveProof.close();
                         }
          sPok.onClick = function() {
              
                app.executeMenuCommand('save'); // save existing Illustrator file
                
                var my_pdf= new File("users/Les/Desktop/PROOFS/"+save_pdf.text); //Full File Path 
                
                saveFileToPDF(my_pdf);
                            
                function saveFileToPDF(myFile){  
                //Setup Save Options for PDF  
                var saveOpts = new PDFSaveOptions();  
                saveOpts.compatibility = PDFCompatibility.ACROBAT6;
                saveOpts.generateThumbnails = true;  
                saveOpts.preserveEditability = true;
                saveOpts.requirePermissionPassword = true;  
                saveOpts.permissionPassword = "*-*-*-*-*-*";
                saveOpts.compressArt = true; //default
               saveOpts.embedICCProfile = true;
               saveOpts.enablePlainText = true;
               saveOpts.generateThumbnails = true; // default
               saveOpts.optimization = true;
               saveOpts.pageInformation = true;
                
                if (HQ.value==true){
                  saveOpts.pDFPreset = '[High Quality Print]';
                }
            
                if (IDefault.value==true){
                  saveOpts.pDFPreset = '[Illustrator Default]';
                }
            
                if (lowres.value==true){
                  saveOpts.compatibility = PDFCompatibility.ACROBAT4;
                  saveOpts.pDFPreset = 'Smallest File Size v4';
                }
            
                //  
                var originalInteractionLevel = userInteractionLevel;        //save the current user interaction level  
                app.userInteractionLevel = UserInteractionLevel.DONTDISPLAYALERTS;      //Set user interaction level to suppress alerts  
                app.activeDocument.saveAs(myFile,saveOpts);        //Save File  
                userInteractionLevel = originalInteractionLevel;        //Set user interaction level back to original settings 
                              }
                          
                saveProof.close();
                
          }
              
    saveProof.active=true
    saveProof.show()
  
    
  
  

  Oh, please check that: ' "saveOpts.preserveEditability = true;".

  Maybe try to disable this option.

• WIndows 7 - can not lower the screen resolution

  I don't know when it happened... apparently, after one of the windows updates because it worked very well, a month or two ago... anyway, here's my problem. A month ago I got the Sims 3 World Adeventures. I installed it and he played wonderfully. I have themselves are involved in the Facebook games and he has not played for a few weeks, but recently decided to go back to the Sims 3. I clicked the shortcut, open Launcher, I clicked on play and my screen went black, then white, then gray, then horizontal strips of red, green and blue, I think that the colors are then complete blue (like the blue BSOD) then he began again, black, white etc. I could alt tab out after a few minutes.  No error message, no beeps and the computer wasn't warm because I had just started before trying to play.

  I'm running on an Acer Aspite Z5600 with touchscreen (its an all-in-one... looks like a monitor etc), Windows Home Premium, 3 gig of ram, op 64 bit, Pentium system dual core, Intel G45/G43 Express chipset. I went to check my graphics settings - the resolution is set in 1920 x 1080 monitor shows a built-in display. I thought that maybe the resolution was causing problems because the Sims 3 do not like this high middle (I never changed it and the game worked before but I thought of one another program may have) when I put the lower resolution and hit apply I had the same changes in strange black on white, etc.. Yet once again, I had to alt tab out... it took forever to do, and my resolution had not changed.  Everything else seems to work fine... my browser and other... I can play some Facebook games and it seems pretty much any game that starts in a window / windowed mode. I changed the settings on the Sims 3 to play in windowed mode and it starts very well (I HATE the windowed mode tho) I decided to do some research and see if I could find a solution later and decided to go play another game, (one of the verizon games I had played before without problem) and he did the same thing as Sims 3 dang. It is a demand pretty weak game graphics-wise (his Poppit to go - even my old laptop can play it.) so having unplayable all of a sudden he had me beat. Color changes look almost like a kind of graphical test. Hope I have not confused LOL thanks everybody for any help.

  I have a reversible temporary solution of 10 steps for this problem, im also using a race of z5600 acer windows 7 and when I try to run anything that changes the resolution of the screen the screen turns black and flashes different colors is a way around this, but you will not be able to use the full screen , and when your done with the game or whatever you will be able to use the full screen new heres how

  1. start

  2 right click computer

  3. click on properties

  4. click on Device Manager

  5. If Conrtol user account appears, click Yes

  6. click on the tab display cards

  7. right click Intel G45/43 Express Chipset

  8. click on turn off

  9. now the display begins to blink and you'll notice that sub-par signifigantly window, you only 3 options for screen resolution size but most of the games will take place and you will be able to see

  10. to make the fullscreen back you will need to follow the same steps as above, then click Activate

  Hope that this help is the only way it would work for me ~ JUZTICE

• Unable to set the display resolution, Intel HD 4600 in Device Manager displays ' generic non-pnp monitor low resolution.

  I am slot as Windows 7 Pro on a Dell Intel 64 bit pc with a screen HD Dell I5 and Intel HD graphics 4600 driver.  PC woke up a few hours of inactivity, after no updates known to windows or other programs, with icons and pages double size beyond the limits of the monitor, setting the low resolution and Device Manager showing ' no generic pnp monitor low resolution ' instead of 'Monitor Dell HD' and no option to increase the resolution.  No help with reset, not restoration, disconnection and reconnection monitor auto plug n Play, 'Search new device', 'add a device', update of the graphics driver, reinstall the drivers from the Dell monitor.  Troubleshooting peripheral reported to date and working correctly.  After I finally uninstalled driver restarted, and graphic displays "default monitor" Device Manager (no longer "generic low resolution"), no graphics driver identified, but don't allow me to change to a higher resolution.  New windows had to be individually size / expanded to fill the screen.  This can be corrected?  I want to optimize my display settings for this monitor.  I have reinstall my graphics driver or just be happy that I can use my computer?  Thank you.

  Call Dell.  Your monitor should have a 3-year warranty.  Your matching OptiPlex with a warranty of one year more.

  Also, check all the hidden and invisible buttons on the monitor.  Someone may have inadvertently changed one of these.

• Dynamic image displays based on Yes / No value

  Dynamic image displays based on Yes / No value

  I´d like to have a picture showing, according to a specific value (y/n)

  .. Sorry need help.

  I have can´t get it workin...

  < img <? PHP $status = "n";

  If ($status == 'y') {}

  "echo"src ="stecker_on.png" alt = "yes" ';

  } else {}

  "echo"src ="stecker_off.png" alt = "no" '.

  } ? > height = "71" width = "101" / >

  The STI image shows not... ideas?

  All I get is a text showing:

  height = "71" width = "101" / >

  Thank you very much!!!

  That error could only say that you implemented my suggestion correctly, or there is a pre-existing error on your page.  The code I gave you is correct.

• I bought a vector image, but when I open it in Illustrator, it's a jpg low resolution. [was: Please help...]

  I bought a vector image, but when I open it in Illustrator, it's a jpg low resolution, I followed all the troubleshooting suggestions, nothing worked. Please can someone help?

  Charmaine thanks!

  I gave you another credit and I'll tell the team contained on the series.

  EBQ

• In Photos, I changed the date, title and information on the location of the images of a slide digitizing company.  I want to preserve the custom metadata and the original resolution of 2500 dpi in a file backup, but when I export it loses my metadata chan

  Using version 1.3 of Photos, I edited the metadata about the images, I received a business of digitization of slides to insert the first day of the slide, the location, a title and a keyword.  I want to archive these images with the original resolution of 2500 dpi, but when I export original unmodified, it does not preserve information.  When I export by choosing export as XMP IPTC, I can't read the XMP file to see if there are my revisions.

  When I export using the 'Export # photo (s)' choice, I can use the previews/tools/Inspector/iptc and see my changes.  But this photo has only 72 dpi.

  Is there a way to preserve this modification of metadata information in the original not modified?  Alternatively, this file has XMP I exported the info?  If so, how can I read it?  And that would mean I need to export both the original unmodified and the XMP file to my files from archive?

  Don't know what you want - well there is a CIO field in the EXIF fields it is meaningless as DPI is not a setting but the result of a math problem third grade - points by (divided by) inches until you add inches per impression you have no IPR - and when you add inches the DPI for printing are determined by calculating not by any setting

  For more information, see http://www.rideau-info.com/photos/mythdpi.html

  A 1200 x 1800 pixels picture printed as a 4'x 6' printing is 300 DPI bit matter what setting the EXIF says

  LN

• VI to convert input signals NI 9402 in a RPM value, based on the frequency of the pulses

  Hello

  I'm looking for a VI convert an input signal NI 9402 in a RPM value, based on the frequency of the pulses. Is there such a thing that exists in the library of national instruments?

  I run LAbview 2014 integrated control and monitoring on on a cRIO 9802 high performance integrated system with NEITHER 9402, 4 channels, 50 LV, LV TTL Module input/output digital, ultra high speed digital i/o for the cRIO module.

  Any help would be greatly appreciated.

  The easiest way is to use the FPGA to get the time between the edges of your pulse increase (shift registers to maintain the current situation and the time will be necessary).  This will give you the period.  If it's a single pulse per turn, then the number of laps is just 60/T, where T is the time in seconds.

• Image of the desktop - is huge and falls to the lower right

  updated to the windows Explorer 8 and now my desktop image is huge and goes down to the lower right.  I set the resolution and centered under the down payment and nothing is fixing.  I even missed for standard windows desktop theme and you don't see it because it fell to the lower right so far.

  System Restore should do the trick: http://support.microsoft.com/kb/306084

• values based on the following logic 'values after the first values of two '_' and before last '_' values '.

  Hi all

  I need the values according to below 2logics in a single select query using instring and substring

  1 values based on the following logic 'values after the first values of two '_' and before last '_' values '.

  2 values based on the following logic 'values after the first values of two '_' and before last'-'values '.

  EXM:

  Entry: ABCD_EFGH_IJKLM - NOPQ_XYZ output: IJKLM - NOPQ

  Entry:. ABCD_EFGH_IJKLM - NOPQ output:IJKLM

  Thank you.

  Check the following

  WITH DATA1 AS

  (SELECT "ABCD_EFGH_IJKLM - NOPQ_XYZ" double val)

  UNION ALL

  SELECT 'ABCD_EFGH_IJKLM - NOPQ' double val

  )

  SELECT SUBSTR (VAL, INSTR(VAL,'_',1,2) + 1, DECODE (BIGGER (INSTR (VAL, '_',-1, 1), INSTR(VAL,'-',-1,1)), INSTR (VAL,'-', - 1, 1), LENGTH (VAL) + 1, INSTR (VAL, '_',-1, 1))-(INSTR (VAL, '_', 1, 2) + 1))

  OF DATA1;

  Concerning

  Salim