Unable to use Microsoft Lifecam on Pic4pass because of the low resolution?

Similar Questions

• Why hp disables the use of scanning and faxing because of the low level of ink on my photosmart c4385?

  Why hp disables the use of scanning and faxing because of the low level of ink? Printer says print cartridge missing or not detected. Doesn't make sense to me because the ink has absolutely nothing to do with the other functions. Since I bought this all in one I replace ink twice and I only printed about 10 pieces of paper for nine, making these extremely expensive 10 sheets!

  try reseating the cartridges once more & switch off the printer and remove power & other cables connected to the printer & press & hold the power for 20 seconds & then reconnect all cables back & then turn on the pritner & try to use that will solve the problem...

• can not set the resolution of the screen because of the low resolution and can not click on apply

  When I turned on this morning all of the screens were above the waist.

  I tried to adjust the screen resolutions, but the apply button was below the bottom of the screen. All screens are above the waist

  Concerning

  Don

  When I turned on this morning all of the screens were above the waist.

  I tried to adjust the screen resolutions, but the apply button was below the bottom of the screen. All screens are above the waist

  Concerning

  Don

  Use the Enter key.

  It works the same apply and OK buttons.

• my Dell inspiron n5010 is unable to use an ip address to connect to the internet?

  my Dell inspiron n5010 is unable to use an ip address to connect to the internet? and I went into Device Manager > network adapters > then I face three options 1 > virtual broadcom wireless adapter > DW1501 wireless-n WLAN half mini card > Microsoft virtual WiFi Miniport Adapter that should choose?

  Thank you very much

  Hello big evil Dossary

  Follow the steps to connect to a form of wireless link below. Thank you.
  http://support.Microsoft.com/kb/928429

• I can't use the apps because of the low screen resolution page.

  Original title: Low screen resolution.

  I have improved my netbook Acer Aspire One Windows XP to windows 8 and can not use the apps because of the low screen resolution page.  Messages talking about manufacturing change of resolution with Windows 7, but that won't help me. Y at - it something that I can download to increase the resolution of the screen or I will have to consider having someone to install some kind of material?

  Most often when a device does not work, it is because the driver is damaged. Re-install a new copy should help

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  http://captaindbg.com/how-to-update-drivers-on-Windows-7/   (also works on Windows 8)

• Hi, unable to do any development in LR because of the message 'develop Module is disabled"can someone please get back to me as soon as possible to help turn the Module development...!

  Hi, unable to do any development in LR because of the message 'develop Module is disabled"can someone please get back to me as soon as possible to help turn the Module development...!

  You use a MAC or a Windows computer?

  Also mention the version of Lightroom you use

  ~ Assani

• "You are not eligible to use this product or service because of the eligibility requirements for service.

  I installed the software adope and created adope creation of ID after registering the software it is showing the following error message

  " ACCESS DENIED"-YOU ARE NOT ELIGIBLE to USE THIS PRODUCT OR SERVICE because of THE eligibility REQUIREMENTS for SERVICE ' '.

  Try error: "cannot use creative cloud services | Adobe Creative Cloud desktop app

• Not able to use Microsoft LifeCam Cinema machine Windows XP SP3.

  Original title: Cinema of cam Life, XP SP3 error report.

  I have installed the drivers and all, through failures 4 times now, and I always get an error report window when I try and open the "Microsoft Lifecam" app, it takes a few seconds as to try and connect and then an error report appears. I meet the system requirements, I don't know what to do at this point.

  Hi MalickDelorian,

  ·         What is the exact error message/code you receive?

  ·         Have you been able to use the Microsoft LifeCam previously on your machine?

  ·         What troubleshooting steps you tried to solve the problem?

  You can follow this link and check if the problem persists.

  Troubleshoot failures to find the new LifeCam hardware

  Reference: Troubleshooting, install the Intellipoint or IntelliType software, LifeCam.

  File of Microsoft LifeCam Readme and troubleshooting information

  Hope the helps of information. Please post back and we do know.

  Concerning
  Joel S
  Microsoft Answers Support Engineer

• I used Microsoft Producer to synchronize audio and the slides in a presentation, power point, the question is to know how to put it in the form of a PowerPoint presentation file and burn a cd.

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • using microsoft producer for PowerPoint for syn
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  ·        What version of Microsoft office PowerPoint that you are using?

  The money given the article gives you follow the steps on how to publish in Microsoft office PowerPoint 2003, I suggest you follow the steps mentioned in the link given below.

  http://Office.Microsoft.com/en-us/PowerPoint-help/produce-computer-based-training-with-PowerPoint-producer-HA001222910.aspx

  To burn a CD or DVD, I suggest you follow the steps mentioned in the article below.

  How to copy information to a CD in Windows XP

  http://support.Microsoft.com/kb/306524

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot get pictures on netbook because of too low resolution with installed windows8. Need 1024 x 728, but max is 1024 x 600 on netbook

  Install Windows 8 on Netbook. Cannot view images IE because of the resolution. need 1024 x 728, but max is 1024 x 600 netbook. I can solve this?

  "Also when starting, the @ and the" were exchanged, but now seem ok.

  I had the same problem with my Asus EeePC Netbook. The highest resolution was 1024 x 600. I was able to change it by changing the settings of register of Display1_DownScalingSupported in 1152 x 864 (two entries) from 0 to 1. Proceed at your own risk.

• Unable to use Edit to copy / paste because it is grayed out in a new tab to the upper left corner of Firefox window?

  Since the update of Firefox by following the instructions, can't use Edit cut and paste etc. It was necessary to individual emails from my son!

  The text of the edition is still gray, but the three buttons next to it should become enabled if there is something to do as a copy if the text is selected.
  
  You can move the arrow to the right to get a menu with cut, copy and paste.

• my Dell inspiron 1545 is unable to use an IP address to connect to the internet

  None of the programs I use are able to use internet... I ran a diagnostic connection test and everything with the exception of the 'ping IP Internet' Please help

  Hi SALEH5139,

  Since when are you facing this problem? Have you made the last changes made to the operating system or added a new software or hardware?
   
  I recommend you to uninstall and reinstall the network adapter, do the following steps:
   
  1. click on start, in the start search box, type Device Manager and then press ENTER.
   
  2. in Device Manager, look for the network adapter in the list of devices.
   
  3. right click on the network adapter, and then click Uninstall.
   
  4. once it is uninstalled, restart the computer.
   
  Once you restart the computer, the network card is installed automatically.
   
  Check network connectivity.
   
  If the steps above do not work, try ping a few websites and chec if you have connectivity, to do this follow the steps below:
   
  1. connect to the Internet, click Start, click Run, type the command, and then click OK. Vista users should not run.

  Note: If this command does not work, try typing cmd.

  2. at the command prompt, type ping www.cnet.com, and then press ENTER.

  Note: If the ping succeeds, at least one of the four race packets sent is received from the destination server to and you will see text that is similar to the following at the command prompt:

  Packets: Sent = 4, received = 4, lost = 0 (0% loss)

  Note: If the command in step 2 successfully returns at least one of the four packages, you don't have to perform step 3. Only test ping to step 3, if the step 2 ping test fails.

  3 repeat the steps in method 2 using the following two commands until you receive at least a successful ping test, or until you have used the following two commands:

  Ping www.yahoo.com

  Ping www.bing.com hope this information is useful.

  I have

  Please let us know if you need further assistance.

  Concerning
  Rehman - Microsoft Support

• What is the original reason for the iPad mini is not able to upgrade to iOS 10? Because of the low RAM? CPU?

  I wish that the key to why the 10 iOS is not taken in charge on the mini original iPad. I was very excited when it was announced, because it is at the time displayed on the supported list. A while later it was removed and I am really disappointed! I love apple products, but I can't spend all my money on them. I would like to have all the answers about this.

  PS - If it's the cpu that's the problem, Apple would be able to insert a command overclocking in order to boost performance a bit?  Just a thought...

  We cannot discuss why it is not supported - only Apple know that & they usually don't tell. See notes on speculation about the terms of use (section 2 1.2).

  Apple Support communities use agreement

  Consider that Apple will have tested and have found it did not work well, or maybe they simply decided that the aircraft was too old. You might be better to stay with your current iOS.

  Apple offers no tools to overclock iOS devices or change the CPU etc - you get what you buy and it stays that way. Only the software is expandable.

• Is it possible I can pull down my bandwidth use high-speed videos of youtube; at the lower level?

  I use a package broadband fixed, but youtube videos are eating 85% of my quota. Please give me some advice on how to survive... !

  Hi anowariqbal, I think it's a YouTube parameter. See: https://support.google.com/youtube/answer/91449

• Application using Java SDK 5.0 compatible with the lower SDK version?

  Hello

  I wanted to know if I'm developing an application using the Blackberry Java SDK 5.0, it would work on slot version 4.3 or 4.2.1? If the current application has features not available on the previous version of course.

  I mean, if I develop an application of basic as a HelloWorld with SDK 5.0, this app works on a phone with SDK 4.2.1?

  Thank you

  Damien.

  The only time where I tried it, I received an error of compatilbility so I would say not in my experience.

  My suggestion is to build with backward compatibility in mind and remember that what you build for 4.2 will work in 5.0 and so on.