the implementation of this line of code C: for (int i = 0; I <; G_ReadLen; I = i + 2).
I would like to implement in labview C++ code, but I can't do or loop to increase by two
int j = 0; for (int i = 0; i)< g_readlen;="" i="i" +="" 2="">
{
AD_H BYTES = ByteArray.GetAt (i);
AD_L BYTES = ByteArray.GetAt (i + 1);
[J] ValueArray = AD_H<>
[J] ValueArray = ValueArray [j] + AD_L;
unsigned long Temp is ValueArray [j] > 12;.
Volts [j] = ((float) [j] ValueArray) * 0.0048875; () Message.Format
("%X %x - %X, - %d, +%.3f volts", AD_H, AD_L, [j] ValueArray, [j] ValueArray Volts [j]);
m_output_ep1i. InsertString(0,Message);
j = j + 1;
}
Thank you
Thank you very much sexy problem solved I have attached the solution
Tags: NI Software
Similar Questions
-
I have the feeling that the 0x80000FF on this page error code is incorrect
I have the feeling that the 0x80000FF on this page error code is incorrect according to the Windows Vista/Microsoft Update, which is not surprising.
http://support.microsoft.com/kb/946414 Where is the k of code 0x8000FFFF error page?
Looks like someone made a typo on this page.
Here's another page: http://windows.microsoft.com/en-US/windows-vista/Windows-Update-Error-8000FFFF
with the good 8000ffff
TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.
-
IS THERE A LIST OF THE DRIVERS THAT MATCH A FAILURE CODE? FOR EXAMPLE (0XDEEDFADE)
IS THERE A LIST OF THE DRIVERS THAT MATCH A FAILURE CODE? FOR EXAMPLE (0XDEEDFADE). «I GET THIS WHEN I TRY TO CONNECT A RECORDER APPLICATION MY PC (WITH CODE SCREEN BLUE DEATH "DRIVER IRQL-NOT-DONOR-BASED EQUALITY).»
[Moved from comments]
There is no error like code: 0XDEEDFADE
Usually due to a bad driver, or a faulty or incompatible hardware or software. Use the general troubleshooting of STOP the Messages above checklist. Technically, this error condition means that a kernel-mode process or driver tried to access a memory location to which it did not have permission, or at a kernel interrupt request level (IRQL) that was too high. (A kernel-mode process can access only other processes that have an IRQL lower or equal to, its own.)
Make sure you uninstall and reinstall the drivers using the following general method.
First of all, download the latest driver. Then perform the following steps.
Click on Start Menu
Right click on my computer/my computer
Click on manage the
Click Device Manager in the list on the left
Find the device you are trying to uninstall by expanding the game appropriate device (network adapter/IDE ATA / ATAPI controllers)
Right click on the device
Click on uninstall (do not click OK in the dialog box that opens after hitting uninstall it)
Put a check mark to remove software driver for this device (if this option is available, if not, just hit OK) and click OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.
You can also:
Sign in as an administrative user.
First of all, download the latest driver. Then perform the following steps.
Click on Start Menu
Click on Control Panel
Click on hardware and sound
Click device (the last link under devices and printers) Manager
Find the device you are trying to uninstall by expanding the game appropriate device (network adapter/IDE ATA / ATAPI controllers)
Right click on the device
Click on uninstall (do not click OK in the dialog box that opens after hitting uninstall it)
Put a check mark to remove software driver for this device (if this option is available, if not, just hit OK) and click OK
Restart your computer only if Windows asks you to.
Install the latest driver for the device.
My system specs
System manufacturer/model number HP Pavilion e9110t
Windows 7 Home Premium 64 Bit operating system
Processor Intel (r) Core (TM) 2 CPU Quad Q9550 @ 2.83 GHz
Card mother Pegatron IPIEL-A3
6,00 GB Hundai HMT125U6BFR8C-H9 memory
Graphics card ATI Radeon HD 4850
Its Realtek High Definition Audio card / ATI High Definition Audio
Monitor (s) displays Acer AL2216W
Screen resolution 1680 x 1050
Keyboard HP keyboard
Mouse HP mouse
Unknown/installed by HP POWER supply
Generic HP case
Cooling Stock Intel cooling
Hitachi HDP725050GLA360 ATA Device 500 GB hard drives
Internet download speed: 19.15 Mbps Upload: 1.67 Mbps
Another news network adapter D Realtek RTL8168D/8111 Family PCI - E Gigabit Ethernet NIC (NDIS 6.20) network adapter 802.11n Wireless PCI Express Card LAN Adapter
-
I would like to know where to find a friend app has been installed on my phone and who else is listed on it? I would love the history of this app on my phone for today's date, please. I changed my phone a couple of times, because the application was initially installed, but I can't work when it has been installed or that has first been listed on it... where I'd get that information from? I do my back ups on my laptop that uses OS X El Capitan Version 10.11.4 on iTunes. Thank you.
Locate the app in iTunes > window Apps, select it, and press Cmd + I to get info. The file tab should show which account it was acquired on and when. Another I don't think that there is no history, that you can get. All you can see is a current list of those you follow and you allowed to follow you.
TT2
-
How can I download updates for CS5 Extended when I get the error message "this serial number is not for a product calling it"?
Updates are not related to series numbers, so you must have done something compared to try to use an upgrade rather than an update. Adobe not revise older versions of their software to adapt to the latest hardware/devices. They create/sell new versions of their software for it. If you subscribe to the Cloud at some point you shouldn't have a problem with the software becomes obsolete.
-
What is the problem with this piece of code?
Security.allowDomain("you/tube.com"); var my_player:Object;
var my_loader:Loader = new Loader();
my_loader. Load (new URLRequest("yout/ube.com/v/xe95yC_nsDI?version=3"));
my_loader. = contentLoaderInfo.adfunction (Event.INIT, onLoaderInit);
function onLoaderInit(e:Event):void {addChild (my_loader);
my_player = my_loader.content; my_player.addEventListener ("onReady", onPlayerReady);
}
function onPlayerReady(e:Event):void {my_player.setSize (520,290);}
}
If you want to help troubleshooting code you should present correctly implemented with withdrawal form and separate lines for different actions.
I see a number of errors in these two lines only...
my_loader. Load (new URLRequest("yout/ube.com/v/xe95yC_nsDI?version=3"));
my_loader. = contentLoaderInfo.adfunction (Event.INIT, onLoaderInit);
(1) who cannot be a valid address of youtube with the slash in there
(2) who dot leading contentLoaderInfo is a mistake
(3) I don't know of a method called adfunction, and if I paste this line it turns into something with a dash in the name of this method
-
Fill the table with the formula nodewith a line of code
Hello
This is my first post of the community, OR maybe this question has been asked 1000 times but I could find no answer.
Before using LabView I used Matlab a lot. I find a bit that it's too complicated without reason sometimes in labview work with arrays.
I inherited, and I'm doing a little cleaning. what it does is extractr 2 and 3 position and creates a new table with her and another oner with other elements of the first table. In my view, that he becomes confused because you should rely on the cell of the table, the position of the output and I didn't wat to work this way.
I replaced it with a knot of formula. Here is the code
The departure is FP, the table of 6 elements is mdot and the 2 elements array is press
MDOT float64 [6], press [2];
MDOT [0] = FP [0]; MDOT [1] = FP [1];
MDOT [2] = FP [4]; MDOT [3] = PS [5];
MDOT [4] = PS [6]; MDOT [5] = FP [7];Press [0] = PS [2], press [1] = PS [3];
Now, I want to know if it is possible to do as I would in matlab or C, where you can create a table with one line of code. What would the syntax in formula node to do something like:
MDOT [6] = [FP [0], FP [1], [4] of FP, FP [5], FP [6], FP [7]];
Press [2] = [FP [2], FP [3]];
Thank you
Use remove the table. You can provide an index and length of elements to remove. One of the outputs will be the original with the subset of the deleted table and the other output is the subset deleted. 1 NŒUD!
EDIT: Created a snippet just after my previous post.
-
Where can I add this line of code?
I want to start by saying that I know very little about flash... So, I apologize for my ignorance, and if I say words that don't make sense do not hesitate to laugh and shake his head.
I have the following code for a "clickTAG"
() MyClickTagButton.addEventListener
MouseEvent.CLICK,
function (): void {}
If (root.loaderInfo.parameters.clickTAG.substr (0,5) == ' http: ' | root.loaderInfo.parameters.clickTAG.substr (0.6) == ' https: ') {}
navigateToURL)
URLRequest (root.loaderInfo.parameters.clickTAG) news, "_blank".
);
}
}
);
Specifications of the publication say "when a click occurs, call the following line of code: PopupWin.openWindow (root.loaderInfo.parameters.clickTAG, '_blank');"
What I need to know, is where will this code? Help, please!
Is the publication, assuming that you build in HTML? Because PopupWin.openWindow is a javascript, as opposed to your AS3 version command. Assuming that it worked from Flash, he would replace this part:
navigateToURL)
URLRequest (root.loaderInfo.parameters.clickTAG) news, "_blank".
);
to open a window with javascript instead.
-
Delete the work of nto lines button code.
Hello
I developed a table in a custom page and I added the deletion icon to that one. If I click on delete, records are deleting application but don't not removing database table... I used following code to delete the records... Pls suggest.
Controller of
Boolean isAuthorisedDelete = pageContext.getParameter
("DeleteAuthorisedToYes")! = null |
pageContext.getParameter ("DeleteAuthorisedToNo")! = null;
If (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM)
. Equals ("deleteauthorisedrow"))
{
System.out.println ("in XXIosCO.processFormRequest ()," +)
"deleteauthorisedrow event fired");
deleteauthorisedrow (PageContext, AM);
}
If (pageContext.getParameter ("DeleteAuthorisedToYes")! = null) {}
String rowRef = pageContext.getParameter ("rowRef");
String rowRef = pageContext.getParameter (OAWebBeanConstants.EVENT_SOURCE_ROW_REFERENCE);
System.out.println ("In XXWorkOrderAMImpl.delete1" +)
(".rowRef:" + rowRef);
am.invokeMethod ("deleteauthorisedrow",
New serializable [] {rowRef});
}
Private Sub deleteauthorisedrow (pageContext, OAPageContext,
OAApplicationModule'm) {}
String rowRef = pageContext.getParameter (EVENT_SOURCE_ROW_REFERENCE);
System.out.println ("In XXWorkOrderAMImpl.delete2" +)
(".rowRef:" + rowRef);
String default = "";
Object addNewRecord = am.invokeMethod
("getAuthorisedRecordStatusByRowRef", new [Serializable] {rowRef});
If (addNewRecord! = null & & addNewRecord.toString (.equals("Y"))) {}
Default = "do you want to delete the record?
} else {}
Default = "you sure you want to delete the record?
}
OAException = message
New OAException (default, OAException.WARNING);
OADialogPage = dialog
new OADialogPage (OAException.WARNING, message, null, "", "");
dialog.setOkButtonItemName ("DeleteAuthorisedToYes");
dialog.setNoButtonItemName ("DeleteAuthorisedToNo");
dialog.setOkButtonToPost (true);
dialog.setNoButtonToPost (true);
dialog.setPostToCallingPage (true);
dialog.setOkButtonLabel ("Yes");
dialog.setNoButtonLabel ("No");
Hashtable deleteParam = new Hashtable (1);
deleteParam.put ("rowRef", rowRef);
deleteParam.put ("WipEntityId", pageContext.getParameter ("WipEntityId"));
dialog.setFormParameters (deleteParam);
pageContext.redirectToDialogPage (dialog);
}
AM
public void deleteauthorisedrow (String rowRef)
{
XXIosAuthorisedVORowImpl = rowToDelete
(XXIosAuthorisedVORowImpl) findRowByRef (rowRef);
If (rowToDelete! = null)
{
System.out.println ("In XXWorkOrderAMImpl.deleteauthorisedrow ()" +)
(".rowRef:" + rowRef);
IsAddRowRecord = Boolean
rowToDelete.getaddNewRecord ()! = null & &
rowToDelete.getaddNewRecord (.equals("Y"));
rowToDelete.remove ();
if(!isAddRowRecord)
{
getOADBTransaction () .commit ();
}
}
}
public String getAuthorisedRecordStatusByRowRef (String rowRef)
{
String recordStatus = null;
XXIosAuthorisedVORowImpl line =.
(XXIosAuthorisedVORowImpl) findRowByRef (rowRef);
If (line! = null)
{
recordStatus = row.getaddNewRecord ();
}
RecordStatus return;
}
Thanks in advance,
Roxanne.Roxanne
You can try the workaround instead of using rowRef, create the parameter in the settings property fire action and get this value to check what the line clicked and delete this line.
Thank you
-Anil
http://oracleanil.blogspot.com -
Can someone explain to me how does this line of code?
My friend set in this code to my game script
If CollisionDistance < 2 then
otherwise if "pMushroom" = [8.16] .char chain (collisionModel) then
pInfo = member ("Info")
pInfo.Text = 'press 'F' to consume mushrooms. "on the other
end if
on the other
pInfo = member ("Info")
pInfo.Text = «»
end ifIf it is used in my game, so that when a RADIUS is less than 2 units following the success an object named pMushroom, instructions came who say 'Press 'F' to consume mushrooms' (I'm sure you knew that already).
I have a bunch of mushrooms on lebed pMushroom01 - pMushroom09
I tried to use it for other models like:
otherwise if "pStick" = [8.16] .char chain (collisionModel) then
pInfo = member ("Info")
pInfo.Text = 'press 'F' to take the stick. "But the instructions are not pop-up. I checked that I was the right distance away with my collision detection.
Could someone explain to me the code and what could be bad?
'char [8.16]' is what I really don't get.
collisionModel is most likely a variable property. So ' or if 'pStick'.char = string (collisionModel) [8.16] then "takes everything that is in this variable and set as a string. Then it is the analysis of the characters of this string 8 to 16 and comparing this void string to the pStick string.
It works in the first example, because "pMushroom" has 9 characters. 'pStick' has six characters and so it will never equal to these characters in collisionModel. You can try:
otherwise if "pStick" = [8.13] .char chain (collisionModel) then
It can work.
-
What is the problem with this pl/sql code?
What is the problem with this statement of the cursor? I am getting PLS-00341 error for her:
How to solve this problem?CURSOR cur_rsource(p_sql_stmt IN VARCHAR2) IS SELECT plan_table_output FROM v$sql s, table(dbms_xplan.display_CURSOR(s.sql_id, s.child_number)) t WHERE sql_text LIKE '''%'||p_sql_stmt||'%''';
Thank you
Published by: PhoenixBai on December 14, 2009 14:05I don't have time right now to study exhaustively, but for me his vomit ORA-00942 table or view does not exist on this line:
SELECT sql_id, child_number into tmp_sql_id, tmp_child_number from v$sql where sql_text like sql_statement||'%' and sql_text not like '%v$sql%';
I am able to select from v$ sql in normal SQL as user I am compiling as, so don't know why it's complaing.
Anyone know if there are certain restrictions on access to the views v$ through PL/SQL?
EDIT: http://www.dbasupport.com/forums/showthread.php?t=22299
Access to the views of $ v seems to be through a role - try giving explicit access to it.
As SYS, you must grant select permissions on V_$ SQL (V$ SQL is synonymous with V_$ SQL) to your owner of the procedure. Just tested on my system and it allows him to compile.
Published by: Cyn on December 14, 2009 10:30
-
editing a line and and note the id of this line in a loop of the procedure
Hello
In a loop of procedure st., I have updated a table based on some conditions. After update, I need to select an id column in the row update for use even in another procedure. How can I select the id column
Update t1 set t1.col1 = t2.col1
where t1.col2 = t2.col2
For this line, I need t1.col3 for choose later us
If I use select col3 from t1 after the its giving update all values for col3, but I want to only col3values lines updates onlyYou can use the return clause:
SQL> ed Wrote file afiedt.buf 1 declare 2 v_dummy number; 3 begin 4 update emp set sal = 0 where ename = 'KING' 5 returning empno into v_dummy; 6 dbms_output.put_line('Employee:'||v_dummy); 7 rollback; 8* end; SQL> / Employee:7839 PL/SQL procedure successfully completed. SQL>
-
Why this line of code will always return null?
Dear all,
Just a question.
I have this code snippet when a user is required to enter a number.
The immediate attribute both inputtext and button are necessary because I am bypassing the validation on the other components of the form.<af:panelGroupLayout layout="vertical" id="pgl1"> <af:inputText label="number" id="it1" value="#{MyBean.number}" immediate="true"/> <af:commandButton text="Submit" id="cb1" partialSubmit="true" immediate="true" actionListener="#{MyBean.handleAction}"/> </af:panelGroupLayout>
Here's my defined grain in the scope of the request.
I'm having a problem on the line above. I always get a null on input number.public class MyBean { private String number; public void handleAction(ActionEvent actionEvent) { AdfFacesContext ctx = AdfFacesContext.getCurrentInstance(); Map<String, Object> pageFlowMap = ctx.getPageFlowScope(); pageFlowMap.put("number", getNumber()); //Problem line getNumber is always null } public void setNumber(String number) { this.number = number; } public String getNumber() { return number; } }
Why is that so much that I think I already place a value on my grain.
In the interests of completeness, here's how I define my managed bean
Not sure, but no workaround?<managed-bean id="__12"> <managed-bean-name id="__9">MyBean</managed-bean-name> <managed-bean-class id="__11">com.testing.MyBean</managed-bean-class> <managed-bean-scope id="__10">request</managed-bean-scope> </managed-bean>
Thank you
11G PS4 Jdevtry to link your entry to a property in your bean text and use the GetValue method.
check this nice post [url http://adfpractice-fedor.blogspot.com/2012/02/understanding-immediate-attribute.html] understand the immediate attributePublished by: Mohammad Jabr on February 22, 2012 08:25
-
The implementation of coloring line replacing on a ListView?
I'm changing the background color of ListItem based on the current line odd or even number. Is it possible on the Cascade of programming? Thank you
There is no direct way, but:
You could probably inspect the row in the ListItemComponent (i.e. ListItem.indexInSection) and use this value (modulo 2) to determine if you have an odd or rank
i.e.
{ListItemComponent}
{Of container
background: ListItem.indexInSection % 2? Color.Red: Color.blue
}
}Maybe... I have not test that the above, then you will need to play with it
-
I have a USB device 2.0 DCC which works very well under all of our Windows XP machines, but not based on Vista. The device uses the usbser.sys driver and emulation of the virtual Comm Port.
The text of the listing shows the same information on Xp and Vista, except under vista it shows no open pipes. Shows Device Manager: device can not start (error Code 10).
Using Vista I can't connect to the vista of CDC through concentrators or device to any other device wireless hub except for a Dlink Wireless hub, which has a layer of software between the CDC device and the PC. With Xp, it all works very well on more than one PC, with Vista, there are questions. I use the INF manufacturer provided for Vista, still no results.
Any ideas on this would be greatly appreciated.
Hi NuWaveDC,
Thank you for taking the time to post on the Microsoft answers Forums.
Please see the following article for an explanation of this error code 10.
Explanation of error codes generated by Device Manager
http://support.Microsoft.com/kb/310123
Follow the steps listed for the error Code 10 see if this helps solve your problem or not.
Please post back to let us know if this information was useful or not, so that we can help you if need be.
Robyn
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Can't resize external backup Time Machine in the hard disk partition
I have a Seagate Expansion to drive 3 that I use for storing files as well and Time Machine. Initially when I set up the drive, I allocated 350GB for the partition that I use with Time Machine. I use a 256GB MacBook Pro and Time Machine is now advisi
-
32D1334B LCD TV - not light power light flashes red &; Green
I have a Toshiba 32D1334B LCD TV, it used to work perfectly well and then all of a sudden, it will not activate.When I plug in the TV, the power automatically light flashes red and green permanently. There is no way to turn on the TV; the screen rema
-
6700 Offiejet incoming fax in color will not print. How can I change this?
The manual and online 'help' each say to change the incoming fax print option but do not say HOW TO DO THIS! This work through the control panel of the printer or online or WHAT?
-
J510a feeds more than one paper at a time
Hello I recently bought a hp j510a 2050 (my os is win vista) all in one and first 2 days were fine, but started 3-4 documents both on printing single power supply. I am not well versed with computers. When printing, all sheets in a printing of loop c
-
Trying to find the font used in an file under license
I bought a license, but the text is not editable, but in the paths.How to find the police for this file, I can not also know how to contact the artist directly.https://stock.Adobe.com/search?k=109336435File # 109336435