32D1334B LCD TV - not light power light flashes red & Green

Similar Questions

• KDL-46XBR9 shuts off and the power light flashes red

  KDL-46XBR9 shuts off and the power light flashes red

  It flashes ten times, then rehearsals.

• 2407WFP Power Save mode - only flashes red, green, blue, black, white, repeat

  Hello

  My 2407WFP won't go into fashion, economy of energy even when the computer is off. (He used to do this properly).

  When the computer sleeps, turned off, or when the cable is disconnected, the monitor will be full-screen flash red, green, blue, black, white, then go to sleep for about 5 seconds. Then, he repeats this sequence instead of going right to sleep/wake.

  Different computers, different cables, no change. Is it possible that this is somehow the self-test mode?

  Thank you.

  * Turn off the monitor
  * Press and hold the plus button and menu button at the same time, and then click the power button
  * Once back on, press the "-" and the service menu should appear
  * Press the button "-". The Service Menu should appear
  * Scroll down to Burnin Mode using the button ""
  * Press the Menu button to turn on this setting
  * Press the button "-" to turn it Off (it should be blue when selected)
  * Press the "+" to highlight the Menu exit
  * Press the Menu key

• Now 23-d044 - installed MXM video card - HP Envy screen flashes red green blue black

  Hello

  I'm a 23-d044 I wanted to do the update/install video card instead of using the integrated graphics card.  I tried two different cards, a nVidia GeForce GT 540 m 2 GB and a part of HP AMD card #707804-002.  In each case the applied heat sink was part HP #694456-001. In each case, whenever I go back to the PC and it works, the screen flashes red, green, blue, black, white to infinity. I have read these and other forums indicating that this is a fault with the GPU, but I find that is unlikely given that I tried two different cards. I thought that maybe the MXM connection on the motherboard, but on the original motherboard power connector was defective, I have since replaced the motherboard (about 2 weeks ago) with the same part number. I downloaded both the AMD and nVidia drivers the most recent for each card (while running the integrated graphics card), but not joy.  Anyone have any ideas?  Thanks in advance for the help!

  Sean

  Sean, I had the same problem too.  I finally thought to it.  Just above where the grafics card go is two connectors and one of them has a plug in there.  above the connectors, said uma_lvds, the other says MXM_LVDS.  Swap the power cord of the uma_lvds to the mxm_lvds.  This will fix the problem and you will be running.

• The battery light flashes red.

  Battey on my laptop light keeps flashing red, even when the PC is fully charged.

  Hello

  You may need a computer store real (not the leeks and the glances at a BestBuy or a BigBox store) or
  Support of the system manufacturer. Battery or load circuits might have problems.

  Here is the resolution of generic issues that might help.

  Old battery? Unplug the power to the computer - remove the battery and clean the contacts with a pencil
  eraser (do not use this, if your battery is fine slots - just clean up the edges of the knife which fit in)
  them and be careful). Batteries are old, or it could be a problem with the computer.
  Check with the support of the machine system, and many of them have on line forums.

  New Lithium-Ion type battery usually last longer if you do not unload then less than 30%
  However on a laptop that not extend their life a lot. Best is to use the a/c adapter
  When this is possible.

  I use the free version of BatteryBar to monitor my battery. Click on the green button on the
  Yellow box on the right side of the page to download the latest stable version.

  BatteryBar - free version available
  http://osirisdevelopment.com/BatteryBar/index.html

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  You can also check with the manufacturer of system and forums that many use their own
  proprietary software to monitor the battery and they could be known problems with your battery.

  ============================================================

  Try this - to make a Restore Point

  How to create a Vista System Restore Point
  http://www.Vistax64.com/tutorials/76332-system-restore-point-create.html

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  Then Control Panel - Device Manager - Batteries - Double click on each item - tab drivers - update drivers
  (who can not do anything) - then do a right click and UNINSTALL-REBOOT which will refresh the driver
  Stacks.

  Problems with the lives of its use and the battery of power - Mr Fixit
  http://support.Microsoft.com/GP/windows_battery_power_settings

  I hope this helps.
  Rob - bicycle - Mark Twain said it is good.

• BlackBerry Smartphones phone lights, flashing red every 3 seconds. (Blackberry 9900)

  Hello everyone.
  I baught my blackberry Bold 9900 this year (March 2012) ive been use since then, but recently it has begun to develop problems such as freezing and everything. Last night, the battery was 30% (enough for the last two hours) the phone just frozen and won't turn on. It continues to flash red 3 times every 3 seconds. Help? 

  Mr_othman wrote:

  Hello everyone.
  I baught my blackberry Bold 9900 this year (March 2012) ive been use since then, but recently it has begun to develop problems such as freezing and everything. Last night, the battery was 30% (enough for the last two hours) the phone just frozen and won't turn on. It continues to flash red 3 times every 3 seconds. Help? 

  Hello

  Before reloading your OS, please try this sequence... Note that during throughout the entire process 4h15m, your BB must stay connected to a good charger (not the USB PC):

  1. With battery, connect your BB to the wall charger
  2. Leave it alone for 2 hours, no matter what the LED or the screen not
  3. Remove the battery
  4. Wait 15 minutes
  5. Insert the battery
  6. Wait another 2 hours, no matter what the LED or the screen not

  This has been known to "revive" some BBs.

  It is also possible that your battery or BB has encountered a problem... to test, this sequence is necessary:

  1. Get a known good and already fully charge battery... use it in your BB and see what happens
  2. Get access to a BB good and the same known... use your battery in there and see what happens

  The results of this will show if your BB or your battery that has the problem.

  Good luck and let us know!

• what it means if the power LED flashes red, that I am plugged into the power outlet

  help what is a flashing red light on average power

  Yes, the batteries in laptops are like any other rechargeable battery, they have a life cycle. Since the bits of information so far, it sounds as if you do not want to replace the battery. You can see what is essentially a stack to the page linked below:

  How to replace your laptop battery
   http://www.Dummies.com/how-to/content/how-to-replace-your-laptop-battery.html

  What I would say has visited support site for the manufacturer of your laptop; using your specific model name/number search for laptops support page. You should be able to get some type of documentation that will explain the flashing red light. Also get the specifications for the battery of your specific model (see technical data). Though on checking support site for the manufacturer to see if they have their own forums, if so you may be able to find details about the light, and what is involved in the specific battery in your laptop.

  Computer manufacturers
   http://Windows.Microsoft.com/en-us/Windows/help/contact-support/computer-manufacturers

  Kind regards

• Toshiba Kira - screen flashes red green blue black

  Hi all

  I have a Ultrabook Kira I bought last year and it worked fine until about 3 months ago.

  But now he has a problem with the screen as follows.
  She suddenly starts cycling continuously full-color on-screen, and then sometimes it returns to normal for some time and randomly goes back again to the annoying cycling colors.

  Depending on the problem, it will loop the following exact sequence of colors: red, green, blue, black, gray.

  I don't think that it is a loose cable problem because it goes into the problem and comes back without any movement of the machine.

  I mean, the machine itself starts the dysfunction and restores normality by itself.
  These days, I can't work without an external monitor, since the problem is now practically constant.
  I've updated the bios but the problem remains.

  I searched for this problem all around the internet and could see that many people, who bought this laptop model, have the same problem. Thus, it seems to be a failure of the design.

  Thank you!

  > These days, I can't work without an external monitor, since the problem is now practically constant.

  For me, it would mean that the graphics card is OK and the problem must be linked to the internal display.
  However, it looks like hardware problem and that's why I recommend you contact the after-sales service provider authorized to set especially if the warranty is still valid.

  Your comments would be appreciated

• BlackBerry smartphone phone off of himself, now won't turn on and red light flashes

  My phone turn self off about 3 hours.  It turns not back, the CIM flashes red.  Looks like to me he's flashing 2 flashes long then 2 a small right now.  If he repeats continuously with 20-30 seconds between each.  I tried to plug it into my laptop but is not connected.  I'm OK with the computer, but not a lot, so if someone can help me?... Well explained or simple answer would help me lol.  Thanks Katie.

  keep try again.

  Plug the USB cable into the device and then run the cmd line file and see what happens.

  This process is good enough for saving devices. Be patient and try with the battery and the battery.

• Power LED is red (WAG354G)

  After power on, the power Led flashes red, then turns red.

  It is not described in the user manual.

  Wath do you mean?

  Thank you.

  Reset the gateway
  1. hold the reset for 30 seconds button.
  2. then disconnect the Dungeon can now hold the reset for 30 seconds.
  3 plug back the power back in and keep the button of reset for 30 seconds.
  4. release the reset button.

  If the power remains still red light, then your device must be replaced.

• HP dv7-3085dx power light flashes, but the laptop does not work.

  Hello! I have a HP Pavilion dv7-3085dx. It has a hard drive Bay 2.

  Recently, I bought the caddy + cable kit and an Intel SSD. The thing is, when I plug the sata cable to the motherboard for the laptop, and the SSD to it, the laptop does not light. When I press the power button, it flashes once (the power LED flashes once), but the laptop does not light. When I press again, nothing happens.

  I tried to remove the power supply plug, battery and plug it all again, but the power light flashes once (when you press the power button) and no reaction.

  Maybe it's the sata cable: when I remove the new cable and connect the SSD with the sata cable on the 1 hard drive Bay (the cable supplied with the notebook), it works fine. The laptop starts. And when I connect the former sata cable, with the SSD on the second hard drive Bay, it also works.

  I just want to now what is the flashing light means light? Why it does not work with the new cable?

  Thanks in advance! Sorry for my bad English...

  Emilio.

  It is possible that this is a problem with the kit. I would recommend to download and install the latest BIOS update for your laptop, using the download at the following link: http://goo.gl/rbHkg

  If it still doesn't work after that, I would recommend to suppress the kit for a replacement or to try another.

• Satellite does not - the power light flashes

  I tried to turn on my laptop and there is a yellow light where the green power light should be, and he won't even be able to until this could be

  Hello

  What laptop do you use?

  Seems the laptop provides a blink code. This means that a material error has been detected.
  Usually short blinking means 0 and a long time means 1.
  The authorized technician must be able to read such a code and to locate the hardware failure.

  Above all it s something wrong on the motherboard!
  Then I n t think you will be able to fix it. This is not possible if you have no experience and the right tools and parts of s.

  So in my opinion, you must contact the ASP in your country for assistance!

  Good luck

• Power light flashes

  I have a late 2009 Mac Pro, that will not start and the power LED flashes continuously. I tried all the different buttons start without success.  Any suggestions?

  This error code means that there is not enough RAM to work.

  When yo get that open the side cover and search lights lit by strips of RAM

• Satellite 2805-S201: AC power light flashes orange 8 times

  Hello

  I worked on a Satellite 2805-S201 and everything was fine until I put a PCMCIA wireless with 3, 3V power.
  After that, the AC power light flashes orange 8 times and recycle.

  It comes with power supply, battery, AC and no battery installed, etc. If I pull out the power plug and the battery and then put both when AC is green and the battery may charge. As soon as I push the power button, I hear a light click on the right side of the device and then it goes into the amber cycling power.

  Bulletins of support mentioned that the card could get damaged, but did not mention the unit itself.
  No, the PCMCIA card is not always connected

  Any thoughts?

  CA

  Hello

  The flashing provides a micro code which refers to the hardware failure.
  But please don't ask me what might mean this code because in my opinion, only an authorized service provider can be read and can check in his manuals and documentations.
  But it is of course, in most cases, it s a hardware problem of motherboard! ;(

  Perhaps the external PCMCIA card was not totally compatible and damages of something on the map but it's only my personal suggestion to ensure what s bad hardware fault diagnosis would be necessary.

• HP pavilion dv6 light flashing no power

  Hi guys, my laptop fell as 3 feet off the bed and now won't charge or turn on. When I plug in the power cord, the light flashes quickly. It is a white color led flashes. What it means that the manual has only white, orange and flashing orange options. I tried to just use the battery and it does not illuminate. Also tried the hard reset when you press and hold power for 30 sec to 1 min. Any solutions would be appreciated. Thank you!

  Hello
  
  
  
  Thank you for the information. For battery light blinks several times, I have included the following document 'computer does not start and the lights blink or computer beeps. Once you have the link open, click on power battery light flashes and follow the steps.
  
  
  
  The second document I've included is 'computer won't start (Windows 7, Vista, XP)'. Once you do not have the document open, click the symptom that is to have your computer and follow the steps in order.
  
  
  
  The last document I've included is, "battery Does not portable computer power or hold a Charge. This will take you through the different options of battery test, power supply and motherboard.
  
  
  
  Please let me know if you are able to turn on the laptop after this, thank you.