The import of the disc failed

Similar Questions

• The attempt to burn disc failed.  Burning failed because of a medium write error.

  Created playlist, click the File command: "Burn playlist to CD."  Burn insiders, but after two pieces had been registered, eject disk automatically with the message: "the attempt to burn disc failed. Burning failed because of a medium write error. "Burning speed was set to 8 x.

  Recent history: previously, I successfully burned two disk at maximum speed, but it took hours to write the tracks on the disc!

  Using the highest speed it shouldn't take hours to write a disc.

  Have you tried a good quality disc?  I bought cheapo discs in the past and had 50% failure on me during combustion and 25% success fail to try to replicate.

  You can try a disk cleanup drive. Slot loaders act as vacuums for dust.  Yet, I would not hold for a large part using a.

  You provide details on your computer. I'm guessing that it is 5 + years old, which means that you could easily be in place for a replacement drive (or buy an external one).

• Copy the file fails the Windows 7 recovery discs sent hp

  I have tried to solve this problem for a month now and I'm at the end of my home.
  I am now on my third set of recovery discs HP and all have the same problem. I insert disk 1 by following the instructions on the support forum. She's going through
  Reformat the hard drive windows partition - tick
  Copy of the files needed to restore the hard drive - tick
  And immediately as ending, this window appears:
  Reducer
  Copy the file fails
  From: E:\PRELOAD\BASE. STORMWATER MANAGEMENT
  To: C:\RM\Image\BASE. STORMWATER MANAGEMENT
  Press OK to retry
  
  Three series of drives have the same come.
  What the hell is happening?
  I'm so sick of this.
  
  Read a few other posts with similar problems, but can't seem to find the solution. I don't have an external hard drive, I can use... only the laptop I'm trying to fix. (G6-1305sa)
  
  Any help? It also doesn't help when the HP support is open on the phones until 5:30 from Monday to Friday. I'm at work so can't call. So frustrating...
  
  Aaaarrrrrgggghhhhh

  Hi Belj,

  Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Pavilion g6-1305sa Notebook and not able to restore Windows. If the HARD drive is faulty, this can cause the restoration should not go well. You can try to run a test of material. Please note remove any and all USB devices and remove the memory card in the slot of the card reader. Disconnect all non-essential devices. What is the original HARD drive? Have you replaced all other parts? Have you tried to do a clean install of Windows 7. Try running sfc/scannow would scan your system to find errors on the command line. You can get to the command prompt by clicking F11 at startup. You can see this Microsoft document on the system recovery options.

  Hope this will help.

  Thank you.

• Pavilion dv6t-2000: replacing old HARD disk with the new SDS and loading the OS with 1 & 2 recovery discs fails

  I just successfully replace the SSD, exchanging an old 250 GB HDD with a new 250 GB HARD drive.

  I started with success, inserted the disc of recovery by the instructions on the screen. Disc 1 and rendered, it succeeded.  When you are prompted, load disc 2, which was also successful.  When asked, in charge of the "application and driver recovery CD" and continued.

  At this point the computer restarted several times, as he said it would be completion of installation of all elements.  Then he came with a message that says: the recovery attempt failed. Select one of the following buttons.

  "Save Log"; 'Details '; 'Retry '.

  Details says:

  ChkErrBB.CMD: Detects an error in the PININST_BBV.

  ChkErrBB.CMD: check c:\system.sav\logs\BurnBootWarn.log

  Any suggestions here?

  I update my BIOS before proceeding with the Exchange.

  I found the solution to this problem was already answered here:

  http://h30434.www3.HP.com/T5/notebook-recovery/quot-detect-some-error-during-PININST-BBV-quot/TD-p/2593075

  Thank you!

• ENVY 20-d010t: "ERROR: no boot disk was detected or the disc has failed." On HP Envy 20

  Hello-

  I have a 20 WANT all-in-One PC and until yesterday it was working fine. When I turned on my PC, a black screen appears with the message: "ERROR: no boot disk was detected or the disc has failed." I followed the instructions on this post and ran a Test drive in the BIOS. I ran both the Quick Check and balance of large and both have been adopted. I don't know what to do now. All solutions?

  Thank you

  mgmartinelli

  Future viewers of this post.

  I took my PC to the Geek Squad at my local Best Buy store and it turns out that Windows was just corrupted. All you have to do is to do a full restore using recovery discs. For more information about your model, I would just search on the internet.

• When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Insert a disk in drive \device\harddisk5\dr5

  When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
  My C: drive is my main area on the HARD disk.  The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
  Are installed:
  FW MS .NET 1.1
  MRS. NST FW 3.5 sp1
  MS SQL Server 2005
  MS SQL Server 2005 compact Edition [ENU]
  MS SQL Server 2005 Native Client
  MS SQL Server Setup Support Files
  MS SQL Server VSS writer

  Here is the error log:
  [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)

  Try to post or search the MSDN Forums

  http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

  http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads

  There are indications that some USB devices may cause this error. Try unplugging as much as you can.

• Hello.  I just uninstalled LR 4.1 and reinstalled using the disc.  There is a 4.4 update I tried to install, but he failed both times I tried.  Message says 'Fail' but without code, etc.  It's 2016 and I use windows 7 64-bit.  Is there an access

  Hello.  I just uninstalled LR 4.1 and reinstalled using the disc.  There is a 4.4 update I tried to install, but he failed both times I tried.  Message says 'Fail' but without code, etc.  It's 2016 and I use windows 7 64-bit.  Is there access to the 4.1 just uninstall and fresh install 4.4 from the site?  Is the problem 4.1 and 4.4 no longer supported?

  You can download LR 4.4.1 including the latest update here:

  https://www.Adobe.com/support/downloads/product.jsp?product=113&platform=Windows

  Uninstall the current version of LR, you have it installed, download LR 4.4.1 installer and install it. I don't know what causes your problem with the update, but that a full installer for 4.4.1 can operate without any problems.

• I can download more pictures from a SD card to Lightroom is.  I can download pictures or Aperture but Lightroom CC gives me the error "the following files were not imported because they could be readable." and then it lists all the files on the disc. I sh

  I can download more pictures from a SD card to Lightroom is.  I can download pictures or Aperture but Lightroom CC gives me the error "the following files were not imported because they could be readable." and then it lists all the files on the disc. I shoot in Raw.  I know it's a problem because I see the number of entries when I have the problem of google.  What I don't see is Adobe recognizing the problem OR suggest a solution.  It is a big problem since I have to find ways to get photos in Lightroom.  Can you please tell me what I should do to get my pictures downloaded.  I had no problem before subscribing to Adobe CC when I used 5 Lightroom.

  A changes to privileges stick? Check the folder again. Should look like this - see image. Also check similar to the folder that you copy photos to.

  

• Import metadata connects in online mode, but "view data" says the connection failed

  Hello

  My installation of obiee is on AIX (solutions for linux will be good). I installed successfully obiee. I created a connection odbc with no problems.

  I download and installed the dev admin too i.e. the stand-alone tool.

  Offline, the two 'import metadata' and after the table is imported, 'Examining the data' works without any problem.

  In online mode, I click on 'Import metadata' of the connection pool or file, both instantly connect. Once the table is imported, I select a column and say "Look at the data" and it says that the connection failed. Should the customer Oracle DB installed on the machine as unix? I tried to copy the file tnsnames.ora to my local computer to the OracleBI_1/network/admin directory, restart services and connected in online mode, BUT always "the connection failed".

  Could someone help me with this please? seems to be a known issue.

  Thank you

  Dan

  YES for the Oracle client.

  Check this parameter to the top of the Data Sources on Linux and UNIX - 11 g Release 1 (11.1.1)

  You can copy the admin folder or completely ignore

• I did a reinstall on my XP. He cleaned the disc then says that he would reinstall. Now it is stuck in the Mode without fail.-"unable to load then reinstall it in safe mode, will restart"

  I had a lot of problems with my desktop computer, so I decided to do a reinstall.  I had to uninstall the old windows machine and then he tried to reinstall.  But the safe mode screen comes up and I get a message that 'could not load reinstall it so that in safe mode, recover to walk'.  He kekeps this and I have no way of getting to my Start menu or anything except f8, etc..  What can I do?

  You're not start from the disc. Check your bios settings to make sure that your cd rom device is set to boot first. Restart the computer. You must first see a screen that says "press any key to boot from a cd. Then you will see a screen that says "NTDetect inspects the hardware configuration of your computer. The screen you will see next will be "loading files". If you see all the other screens then you dΘmarrez not from disk. I'm not really sure of what you mean you got the machine to remove the old windows. The 'old' windows is deleted when formatting that is part of the installation process.

  http://support.Microsoft.com/kb/978307

• The disc you have inserted not readable by this computer. What?

  I have been using an external hard drive (usb) for a few months. As I was falling images to save the disk I got an error that the disc is not readable. I have important files out there that has not been supported until a second source, how to make my computer to recognize the drive without formatting! I can also see it on my disk utility, but it won't allow me to repair the disc until I have format. What are my options?

  

  

  Try resetting the SMC and LANDAU with disconnected JEP, then re - connect and test. If you used another drive as your Time Machine backup, then the DHM has probably also been backup on it. If she has no HD doesn't have, so you can try the recovery of data such as DiskWarrior or DataRescue software and so those who fail, you may contact a data recovery service. Go on, ALWAYS make sure you have a redundant backup of all your data.

• OVFTool - nodisks still creates the file .ovf with the disc information

  Hi all

  I use ovftool with the option - noDisks, but it still seems to be the information of the disc in the file .ovf (see attachments).

  I am trying to import the virtual appliance on a server ESXI 3.5 update 2 using VM Converter 4.0.1.

  When I try and import the virtual appliance, I get the following error:

  Failed: Could not download the OVF file ' http: / / xxx.xxx.xxx.xxx/vm_ovf_backups/esxi-test-disk1.vmdk "."

  I thought that the option - noDisks would leave on any information relating to the disks - I'm wrong?

  Best regards, Michael

  Hi Michael,

  You specify the data store by using the option - data store (or abbreviation - ds). Try ovftool - datastore = ESXi-vmdk-1 /esxi - test.ovf vi://111.111.111.111/ instead.

  -Kristian

• has had to change the password; Unable to add music to the playlist; can't burn music on the disc.

  problems with iTunes.  Failed to add songs to the playlist. can't burn music on the disc; Message (wait 90 days for download purchases). another received message (unauthorized;  "I have not authorized and renewed). Did not help.

  I have 2 iPads, 1 iPhone and iPod touch, so I need iTunes to synchronize. I'd like a different music player.

  Hello

  The problems you describe can be caused by outdated software.

  Make sure that iTunes and OS X are up-to-date.

  On your open the App Store, and select updates from the menu.

  On your iOS devices, tap settings > general > software update

• Cannot eject the disc

  I use a Mac Pro mid-2010. I was burning a DVD and burning failed. Now, I can't eject the disc. It does not show in finder. How can I eject the disc?

  How to eject a defective DVD?

  How the disk by force ejecting

  < published by host >

• Wizard BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  How is it assistant BootCamp 6.0.1 running on El Capitan 10.11.5 installs single partition BootCamp on the disc Fusion consisting of 128 SSD part G SSD and 3 TB of HARD drive on an iMac (retina 5K, 27 inches, end of 2014), but not the part of the HARD drive?

  This has two questions:

  1 capacity of SSDS faster for Fusion drive has been reduced. Therefore less effective for the reader of the merger. For example if I need to create a partition of 80G for my windows bootcamp partition, only 48 G will be left in the drive of the merger.

  2. ability of the bootcamp windows partition becomes very limited, cannot be greater than 120 G.

  3. even when I try to fuse out of the drive of fusion in the 128 G SSD and 3 TB of HARD disk, and then run the BootCamp assistant to create the bootcamp partition start from scratch to reinstall El Capitan only on the HARD drive (without drive Fusion), it won't let me do anything, it just shows an error that says something like "a person has created additional partitions on this drive please select. another disc. But there is nothing else to choose.

  Before my (5 K, 27 inches, end of 2014 retina) to El Capitan Yosemite, I was able to use the previous version of the wizard BootCamp 5.x to create the partition, bootcamp on the drive of the merger. And it will be divided in the fuser unit in two and insert the Bootcamp partition (with the size I chose, which can go up to 1 TB) between two partitions of MAC OSX.

  The disk partitions resulting from it, will be the partition MAC OS x on the SSD, the partition MAC OS x on the HARD drive partition #1, partition MAC OS x on the HARD drive partition #3.

  Then there is the BootCamp partition on the HARD drive partition #2.

  Is there a way to get what I need?

  That is what has been described in this notice of two canoes?

  Installation of Windows on a Boot Camp partition on a drive of TB Fusion 3

  n-on-a-3-TB-fusion-drive http://twocanoes.com/Winclone/support/installing-Windows-on-a-Boot-Camp-partitio

  Thank you.

  After having worked on those weeks, I realized that I need very painfully (by first going back to Yosemite and bootcamp 5 to escape all the limitations of El Capitan and BootCamp 6) I want to share here. Someone at - it other smarter solutions welcome.

  Note these steps and mentioned drivers only work for my version of iMAC, retina 5K late 2014. If you have other material, please search on the web to see which driver will work first. And all of these steps are destructive and assumed that you first take backup. It is only shared for interest only. Readers will have to bear your own risk.

  A. take backup

  1. take a backup completes my iMac Fusion Drive using Time Machine. Then restart with a Yosemite USB installation and select Terminal from the menu on the top bar.

  B. fuse out of the merger in two physical disks drive: SSD + HDD

  1. in the terminal, type the commands in show what the logical volume group ID and the ID of the logical Volume of the disc fusion)

  Cs diskutil list

  2. in the terminal, type commands for the fuse of the fuser unit and separate them to an SSD and a HARD drive.  Note: All data will be destroyed in the drive of the merger. There are many articles in this community on how this could be done,

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  This should finish within 30 minutes. If you have taken more time, this means that your reader of fusion has been altered somehow.

  I hit this issue too.  To use this command to remove the fusion drive hung up, and I need to do the hard to scramble a few sections of data in the hard disk partition table using the controls to tell the OSX this hard drive is a new without partitions:

  Cat >/dev/random /dev/disk0 (where/dev/disk0 is the SSD)

  and repeat for disk1/dev/disk1 which is the HARD drive in my case).

  This command will not return anything, but expect to press Ctrl-Z to end after 1 minute.

  2 create independent partitions (non-fusionend) for the installation of OSX.

  Borne Terminal output, and select disk utility, in disk utility, select the drive to HARD disk (and not on the partition), you will see the error message and you will be asked if you want to fix the fuser unit, click on ignore. Then wipe the HARD drive to create a single 'extended OSX journaled"named"HARD drive".

  3. Repeat step 2, and then erase the SSD drive to create a single 'extended OSX journaled"named"SSD ".

  C. install on the HARD disk as drive didier autonomous not fusion.

  1. go to Yosemite install screen and proceed with the installation of a clean copy of Yosemite to the iMAC. then connect you.

  D. use BootCamp Yosemite f5 to install windows.

  1. launch Yosemite bootcamp.

  2. check the two checkboxes for creating the USB drive to install windows 7 or a later version, and to download the windows supports the Apple software.  Do not click on the last box to install or remove windows pie creating real bootcamp partition again.

  3. it may take several hours to complete this function of your internet b/w and also performance of your USB drive.

  4. If you install Windows 7 (like me), then the downloaded drivers will not work for you, this will cause the issue of the device driver appleDSS.sys does not like this driver and others are too recent for windows 7 to use.  Also, your keyboard and mouse may not work even if you try to plug in a USB external keyboard or a mouse. You need to replace the drivers downloaded by others (the Boot Camp 5.1.5769 drivers that I find in this link: Software Support of Boot Camp 5.1.5769.) (Note: this driver is material specific only works for my iMAC model).  Once you have downloaded it, copy the two files in the root directory of the USB installation to replace the original ones. It's specific and material available for download somewhere on the Apple Site.

  -From the Finder, delete the $WinPE$ and the Boot Camp of the FLASH PLAYER files.

  -Expand the old drivers for Boot Camp 5.1.5769 (two records and another file) on your desktop.

  -Copy the $WinPE$ and records of Boot Camp in the FLASH PLAYER.

  5. open Boot Camp Assistant again and only select the third option, install Windows 7.

  It will show you the screen to select what installation disk, select HARD drive.

  Then drag the slide bar to select the size of the Bootcamp partition for windows you want, knowing that there is a restriction for windows installed using training camp on a MAC that the last byte of the BootCamp partition must reside in the first byte of the 2.2 T of each physical hard drive.

  For my case, I need only 500G for bootcamp and leaving behind 1.7 to for my MAC OSX partition immediately after the bootcamp partition and an another 0.8 T MAC OSX partition after him. 1.7 TB and the partition of MAC OS x 0.8 TB well exploited in the meantime bootcamp partition, will be merged into a fusion drive by Bootcamp. Thus, you will end up with total 2.5 TB of disk space in a logical drive - fuser.

  Go to this link for more details on this subject: n-on-a-3-tb-fusion-drive http://twocanoes.com/winclone/support/installing-windows-on-a-boot-camp-partitio

  6. continue the process to partition the hard drive, then it will restart automatically in windows installation mode, install windows.

  7. once the installation is complete, check that windows is functioning correctly.

  E. Si you want to upgrade to windows 10 Windows 7.

  1 if you plan to upgrade to windows 10, you'll find that the windows IE v.8 7 is no longer works and had many problems to load the page.  Then when you try to download the latest version of Internet Explorer, you get an error that you need at least windows 7 SP1 to support the last IE.  Life is too complicated, just download the google Chrome browser, then search for download windows 10 and then run the Microsoft valuation tool to upgrade.

  2 but before upgrade you, unplug all your MAC USB drives, otherwise, you will find that, after having spent an hour downloading the windows 10 software, the upgrade will fail with the error "/ dynamicupdate...» ». It is an inexplicable mistake that no one seems to understand why. There are articles with proven results that the removal of all USB drives before running the windows 10 upgrade tool will correct this problem.

  F. reinstall OSX El Capitan

  Once your target windows system (if windows 7, windows 8 or windows 10) works very well.  You can continue to create again your Fusion drive and reinstall OSX El Capitan.

  1. Insert the install of OSX Yosemite rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type the command 'diskutil list cs' and you should see nothing to prove that there are no existing fusion drive yet.

  6 type the 'diskutil list' command to list all disks and partitions.

  The SSD has two partitions, the/dev/disk0s1 of EFI (209 MB) partition and the other/dev/disk0s2 of OSX partition we created in step B above, called SSD around 121 G.

  The HARD drive has two partitions, the/dev/disk1s1 of EFI (209 MB) partition and the other/dev/disk1s2 of OSX partition we created in step B above, called SSD.

  G. delete the logical storage of nucleus on the HARD disk drive and it refuses with the DSS to form a merger with faster performance disc

  1. Insert the install of OSX El Capitan rear USB to the iMAC, and then select Restart Windows, or stop, and then turn the MAC once again.

  2. When you hear the ringing tone, press on and hold down the option key for 10 seconds. Then you release.

  3. on the selection screen, select start Yosemite OSX install drive.

  4. after starting, do not proceed to install OSX El Capitan again. But select Terminal from the menu bar.

  5. in the terminal, type orders for (to show what are the logical volume group ID and the ID of the logical Volume of the logical drive). You should see the logical volume to basic storage group created using two partitions on the hard drive, 1.7 TB and TB 0.8 created when we run the Yosemite Bootcamp to install windows.

  Cs diskutil list

  6. in the terminal, type commands to delete logical drives from basic storage.  Note: All data will be destroyed in the logical drive.

  diskutil cs deleteVolume Logical Volume ID

  CS diskutil remove logical Volume Group ID

  7. tap "diskutil list" command lists all the resulting partitions. You should see that the HARD drive has the following partitions.

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS GB SSD 121.0 disk0s2

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 3.0 to disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_HFS 1.7 Untitled TB disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 503.0 GB disk1s4

  5: Apple_HFS 801,4 Untitled GB disk1s5

  8 type the following commands to create the logical volumes group, named "myLVG" (or the name) of fuser using the usable for OSX to the SSD and HDD partitions.

  diskutil cs to create "myLVG" disk0s2 disk1s2 disk1s5

  Note: Mark the group id of logical volume shown in the results.

  In my case, I want to book the last partition as standalone partition disk1s5 no-fusionend, so I can use it to raise the back, or format it in FAT32 to allow the exchange of data between the MAC and boot camp.

  So, I do not understand this last partition in the drive of the merger. in my case, the command that I used is: diskutil cs to create "myLVG" disk0s2 disk1s2

  9 create logical volumes named "Macintosh HD" (or you call it) on the logical volume group we just created for the reader of the merger.

  diskutil createvolume logical volume group ID jhfs cs + 'Macintosh HD' 100%

  10 command "diskutil cs type list" to check the resulting fusion drive created.

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group F53C7A25-C2F3-4997-91E9-2E6B6BAB2E0E

  =========================================================

  Name: LVG

  Status: online

  Dimensions: 1815635525632 B (1.8 to)

  Free space: 90112 B (90.1 KB)

  |

  +-Physical volume E176873C-7C80-4759-8110-BA7307E0C4B3

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-Physical volume 6535AC3C-DCF8-453F-AD47-98905538386E

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 1694646673408 B (1.7 to)

  |

  +--> Logical volume family F3D15F87-FB84-4B43-B2F2-E9EACC7C42D9

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical volume 0D807F6E-FB7C-418F-AAF4-EF3EA3525D10

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1809780178944 B (1.8 to)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  11 exit the terminal, go back to OSX El Capitan install screen and select the name of the fuser unit 'Macintosh HD' proceed to begin the installation of the os x for installation.

  12. There will be a step in the installation ask you if you want to configure as a new computer, or restore from a time machine previous backup. Make your own choices it accordingly.

  13 once OSX El Capitan has been installed and you have finished restoring the data and custom configurations, you can enter the application of preferences to check if you see the icon of the "Startup" disk", and if you choose Startup BootCamp in the next reboot, you should be able to boot up to Windows without pressing and holding the button option when reboot and choose to start windows manually. Also, in windows, you should be able to click on the bootcamp Control Panel and select for a startup to OSX on the next reboot.

  14. one thing to be aware, if you install bootcamp in this way, the boot camp and the GUI utility disk in OSX El Capitan will not be able to adjust your settings. This means, if you need to touch anything or to readjust the size of the partition, you will need to do it again in step A. Alternatively, some how to get started with installing Mac OSX Yosemite USB, then adjust the partitions using similar commands shown in this article or other articles in this community.

  15. yet once please take personal responsibility on damage if you follow the instructions in this article.